| Узел | Модель |
|---|
| (32) - POWER TAKE OFF DRIVE, PRIOR TO P.I.N. 001280 | (3450) - CASE IH ROUND TIE BALER (1/83-12/89) |
| (42) - POWER TAKE OFF DRIVE SHAFT, WEASLER, P.I.N. 000801 THROUGH 001280 | (3450) - CASE IH ROUND TIE BALER (1/83-12/89) |
| (26) - POWER TAKE OFF DRIVE, PRIOR TO P.I.N. 001530 | (3650) - CASE IH ROUND TIE BALER (1/84-12/88) |
| (36) - POWER TAKE OFF DRIVE SHAFT, WEASLER, P.I.N. 000756 THROUGH 001530 | (3650) - CASE IH ROUND TIE BALER (1/84-12/88) |
| (C-16) - PLUNGER | (27) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/65-12/68) |
| (C-27) - POWER TAKE-OFF DRIVE SHAFTS, TWO KNUCKLES | (27) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/65-12/68) |
| (C-28) - POWER TAKE-OFF DRIVE SHAFTS | (27) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/65-12/68) |
| (B-50) - POWER TAKE-OFF DRIVE SHAFTS, TWO KNUCKLE | (37) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/63-12/88) |
| (D-35) - POWER TAKE-OFF DRIVE SHAFTS, TWO KNUCKLES, WHEN ORDERED | (420) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/71-12/76) |
| (D-36) - POWER TAKE-OFF DRIVE SHAFTS, THREE KNUCKLES, WHEN ORDERED | (420) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/71-12/76) |
| (A-51) - POWER TAKE-OFF DRIVE SHAFTS, THREE KNUCKLE, HAYSE DANA, ROCKWELL, REXNORD, 445, 428 & 435 HEAVY DUTY | (428) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/76-12/88) |
| (A-55) - POWER TAKE-OFF DRIVE SHAFTS, TWO KNUCKLE, STEEL SHIELDS, HAYSE DANA, ROCKWELL, REXNORD, 428 & 435 | (428) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/76-12/88) |
| (A-56) - POWER TAKE-OFF DRIVE SHAFTS, TWO KNUCKLE, PLASTIC SHIELDS, HAYSE DANA, ROCKWELL, REXNORD, 425 & 435 | (428) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/76-12/88) |
| (A-57[A]) - FOUR COIL WIRE CONTAINER FOR WIRE BALER | (428) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/76-12/88) |
| (E-66) - POWER TAKE-OFF DRIVE SHAFTS, TWO KNUCKLE, FOR 430 BALER, WHEN ORDERED | (430) - INTERNATIONAL HARVESTER RECTANGULAR BALER (NORTH AMERICA) (1/70-12/78) |
| (A-51) - POWER TAKE-OFF DRIVE SHAFTS, THREE KNUCKLE, HAYSE DANA, ROCKWELL, REXNORD, 445, 428 & 435 HEAVY DUTY | (435) - INTERNATIONAL HARVESTER RECTANGULAR BALER (NORTH AMERICA) (1/78-12/88) |
| (A-55) - POWER TAKE-OFF DRIVE SHAFTS, TWO KNUCKLE, STEEL SHIELDS, HAYSE DANA, ROCKWELL, REXNORD, 428 & 435 | (435) - INTERNATIONAL HARVESTER RECTANGULAR BALER (NORTH AMERICA) (1/78-12/88) |
| (A-56) - POWER TAKE-OFF DRIVE SHAFTS, TWO KNUCKLE, PLASTIC SHIELDS, HAYSE DANA, ROCKWELL, REXNORD, 425 & 435 | (435) - INTERNATIONAL HARVESTER RECTANGULAR BALER (NORTH AMERICA) (1/78-12/88) |
| (A-57[A]) - FOUR COIL WIRE CONTAINER FOR WIRE BALER | (435) - INTERNATIONAL HARVESTER RECTANGULAR BALER (NORTH AMERICA) (1/78-12/88) |
| (F-53[A]) - FOUR COIL WIRE CONTAINER, FOR WIRE BALER | (440) - INTERNATIONAL HARVESTER CUSTOM RECTANGULAR BALER (1/70-12/78) |
| (F-53[B]) - ENGINE SHUT-OFF ATTACHMENT, FOR WIRE BALERS, WHEN ORDERED | (440) - INTERNATIONAL HARVESTER CUSTOM RECTANGULAR BALER (1/70-12/78) |
| (F-53) - POWER TAKE OFF DRIVE SHAFTS | (440) - INTERNATIONAL HARVESTER CUSTOM RECTANGULAR BALER (1/70-12/78) |
| (E-66) - POWER TAKE-OFF DRIVE SHAFTS, TWO KNUCKLE, FOR 430 BALER, WHEN ORDERED | (440) - INTERNATIONAL HARVESTER RECTANGULAR BALER (NORTH AMERICA) (1/70-12/78) |
| (A-51) - POWER TAKE-OFF DRIVE SHAFTS, THREE KNUCKLE, HAYSE DANA, ROCKWELL, REXNORD, 445, 428 & 435 HEAVY DUTY | (445) - INTERNATIONAL HARVESTER RECTANGULAR BALER (NORTH AMERICA) (1/76-12/88) |
| (A-53) - POWER TAKE-OFF DRIVE SHAFTS, THREE KNUCKLE, WEASLER, 445, 428 AND 435 HEAVY DUTY | (445) - INTERNATIONAL HARVESTER RECTANGULAR BALER (NORTH AMERICA) (1/76-12/88) |
| (A-57[A]) - FOUR COIL WIRE CONTAINER FOR WIRE BALER | (445) - INTERNATIONAL HARVESTER RECTANGULAR BALER (NORTH AMERICA) (1/76-12/88) |
| (B-50) - POWER TAKE-OFF DRIVE SHAFTS, TWO KNUCKLE | (47) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/63-12/88) |
| (A-161) - DRY FERTILIZERS, DRIVE UNIT | (DRY) - FERTILIZER UNIT (4-ROW) - 1966 (1/66-12/88) |
| (A-161) - DRY FERTILIZERS, DRIVE UNIT | (DRY) - FERTILIZER UNITS (6-ROW & 12-ROW) (1/63-12/65) |
| (P-06) - DRIVE UNIT | (K-202) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/57-12/57) |
| (P-08[A]) - TUBE | (K-202) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/57-12/57) |
| (P-08) - DRIVE UNIT | (K-202) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/57-12/57) |
| (AE-4) - HOPPER BRACKET AND FRAME, LEFT, FOR EXTRA HOPPER ATTACHMENT | (1-401) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/55-12/58) |
| (AE-5) - HOPPER FRAME AND BRACKET, RIGHT | (1-401) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/55-12/58) |
| (G-06) - HOPPER BRACKET AND TUBE | (100) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/58-12/74) |
| (G-06) - HOPPER BRACKET AND TUBE | (100) - INTERNATIONAL HARVESTER HIGH CLEARANCE FERTILIZER UNIT (1/58-12/74) |
| (H-06) - HOPPER BRACKET AND FRAME, LEFT, FOR EXTRA HOPPER ATTACHMENT | (101) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/58-12/81) |
| (H-07) - HOPPER BRACKET AND TUBE | (101) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/58-12/81) |
| (H-26) - HOPPER BRACKET AND TUBE | (101) - INTERNATIONAL HARVESTER HIGH CLEARANCE FERTILIZER UNIT (1/58-12/81) |
| (J-03) - HOPPER BRACKET AND COMBINATION FEED SHAFT | (118) - INTERNATIONAL HARVESTER 1-ROW FERTILIZER UNIT (1/58-12/74) |
| (K-03) - HOPPER SUPPORT AND FEED SHAFT | (119) - INTERNATIONAL HARVESTER 1-ROW FERTILIZER UNIT (1/59-12/74) |
| (L-3) - HOPPER BRACKET, PLANTER AND FERTILIZER SHAFT | (125) - INTERNATIONAL HARVESTER 1-ROW FERTILIZER UNIT (1/59-12/80) |
| (G-06) - HOPPER BRACKET AND TUBE | (1A-100) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/55-12/58) |
| (H-06) - HOPPER BRACKET AND FRAME, LEFT, FOR EXTRA HOPPER ATTACHMENT | (1A-101) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/55-12/58) |
| (H-07) - HOPPER BRACKET AND TUBE | (1A-101) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/55-12/58) |
| (G-06) - HOPPER BRACKET AND TUBE | (1AV-100) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/56-12/58) |
| (H-26) - HOPPER BRACKET AND TUBE | (1AV-101) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/56-12/58) |
| (M-06) - HOPPER BRACKET | (200) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/59-12/66) |
| (P-06) - DRIVE UNIT | (202) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/58-12/74) |
| (P-08[A]) - TUBE | (202) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/58-12/74) |
| (P-08) - DRIVE UNIT | (202) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/58-12/74) |
| (R-3) - HOPPER SUPPORT AND FEED SHAFT | (208) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/58-12/63) |
| (T-08) - FRAME AND ROTARY WHEEL DRIVE | (214) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/57-12/61) |
| (T-10) - DRIVE UNIT | (214) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/57-12/61) |
| (T-12) - HOPPER SUPPORT AND FEED SHAFT | (214) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/57-12/61) |
| (T-08) - FRAME AND ROTARY WHEEL DRIVE | (214A) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/62-12/81) |
| (T-10) - DRIVE UNIT | (214A) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/62-12/81) |
| (T-12) - HOPPER SUPPORT AND FEED SHAFT | (214A) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/62-12/81) |
| (U-4) - DRIVE UNIT | (215) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/57-12/65) |
| (U-6) - HOPPER BRACKET AND FEED SHAFT, 1957 TO 1965 | (215) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/57-12/65) |
| (V-07) - HOPPER SUPPORT AND DRIVE | (216) - INTERNATIONAL HARVESTER 2-ROW FERTILIZER UNIT (1/58-12/70) |
| (V-09) - HOPPER SUPPORT AND DRIVE | (216) - INTERNATIONAL HARVESTER 2-ROW FERTILIZER UNIT (1/58-12/70) |
| (V-11) - HOPPER BRACKET AND FRAME EXTENSION | (216) - INTERNATIONAL HARVESTER 2-ROW FERTILIZER UNIT (1/58-12/70) |
| (V-07) - HOPPER SUPPORT AND DRIVE | (217) - INTERNATIONAL HARVESTER 2-ROW FERTILIZER UNIT (1/58-12/58) |
| (V-09) - HOPPER SUPPORT AND DRIVE | (217) - INTERNATIONAL HARVESTER 2-ROW FERTILIZER UNIT (1/58-12/58) |
| (V-11) - HOPPER BRACKET AND FRAME EXTENSION | (217) - INTERNATIONAL HARVESTER 2-ROW FERTILIZER UNIT (1/58-12/58) |
| (V-07) - HOPPER SUPPORT AND DRIVE | (217A) - INTERNATIONAL HARVESTER 2-ROW FERTILIZER UNIT (1/59-12/70) |
| (V-09) - HOPPER SUPPORT AND DRIVE | (217A) - INTERNATIONAL HARVESTER 2-ROW FERTILIZER UNIT (1/59-12/70) |
| (V-11) - HOPPER BRACKET AND FRAME EXTENSION | (217A) - INTERNATIONAL HARVESTER 2-ROW FERTILIZER UNIT (1/59-12/70) |
| (W-4) - HOPPER SUPPORT AND FERTILIZER TUBE | (221) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/59-12/73) |
| (X-05) - HOPPER BRACKET AND FEED SHAFT | (222) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/59-12/70) |
| (Y-3) - DRIVE UNIT | (224) - INTERNATIONAL HARVESTER 2-ROW FERTILIZER UNIT (1/59-12/76) |
| (AA-4) - FEED SHAFT AND HOPPER SUPPORT | (225) - INTERNATIONAL HARVESTER 2-ROW FERTILIZER UNIT (1/60-12/71) |
| (M-14) - HOPPER SUPPORT AND FERTILIZER TUBE | (2CK-200) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/57-12/58) |
| (N-04[A]) - HOPPER SUPPORT AND FERTILIZER TUBE | (2CK-201) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/57-12/61) |
| (N-06) - HOPPER SUPPORT AND DRIVE | (2CK-201) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/57-12/61) |
| (AF-07) - HOPPER SUPPORT AND DRIVE UNIT | (2CK-409) - INTERNATIONAL HARVESTER 4-ROW FERTILIZER UNIT (1/57-12/58) |
| (AF-07) - HOPPER SUPPORT AND DRIVE UNIT | (2CK-609) - INTERNATIONAL HARVESTER 6-ROW FERTILIZER UNIT (1/57-12/58) |
| (M-06) - HOPPER BRACKET | (34-200A) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/57-12/58) |
| (R-3) - HOPPER SUPPORT AND FEED SHAFT | (34-208) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/55-12/57) |
| (AD-4) - HOPPER DRIVE | (34-400) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/55-12/58) |
| (AD-5) - COUNTERSHAFT | (34-400) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/55-12/58) |
| (AF-16) - HOPPER BRACKET AND FRAME | (34-409) - INTERNATIONAL HARVESTER 4-ROW FERTILIZER UNIT (1/55-12/63) |
| (AF-16) - HOPPER BRACKET AND FRAME | (34-609) - INTERNATIONAL HARVESTER 6-ROW FERTILIZER UNIT (1/55-12/63) |
| (AH-4) - HOPPER BRACKET AND FEED SHAFT, 1957 TO 1965 | (34U-412) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/55-12/57) |
| (P-06) - DRIVE UNIT | (34U-TC202) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/57-12/57) |
| (P-08[A]) - TUBE | (34U-TC202) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/57-12/57) |
| (P-08) - DRIVE UNIT | (34U-TC202) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/57-12/57) |
| (AG-6) - HOPPER BRACKETS AND HOPPER SUPPORTS | (4-410) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/55-12/57) |
| (K-08) - PACKER WHEEL UNIT, ONE PER ROW | (400) - INTERNATIONAL HARVESTER FERTILIZER PLANTER (1/64-12/80) |
| (AD-4) - HOPPER DRIVE | (400) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/58-12/62) |
| (AD-5) - COUNTERSHAFT | (400) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/58-12/62) |
| (AE-4) - HOPPER BRACKET AND FRAME, LEFT, FOR EXTRA HOPPER ATTACHMENT | (401) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/58-12/64) |
| (AE-5) - HOPPER FRAME AND BRACKET, RIGHT | (401) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/58-12/64) |
| (AF-07) - HOPPER SUPPORT AND DRIVE UNIT | (409) - INTERNATIONAL HARVESTER 4-ROW FERTILIZER UNIT (1/58-12/63) |
| (AG-6) - HOPPER BRACKETS AND HOPPER SUPPORTS | (410) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/55-12/63) |
| (AH-4) - HOPPER BRACKET AND FEED SHAFT, 1957 TO 1965 | (412) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/58-12/65) |
| (V-07) - HOPPER SUPPORT AND DRIVE | (417) - INTERNATIONAL HARVESTER 4-ROW FERTILIZER UNIT (1/58-12/58) |
| (V-09) - HOPPER SUPPORT AND DRIVE | (417) - INTERNATIONAL HARVESTER 4-ROW FERTILIZER UNIT (1/58-12/58) |
| (V-11) - HOPPER BRACKET AND FRAME EXTENSION | (417) - INTERNATIONAL HARVESTER 4-ROW FERTILIZER UNIT (1/58-12/58) |
| (V-07) - HOPPER SUPPORT AND DRIVE | (417A) - INTERNATIONAL HARVESTER 4-ROW FERTILIZER UNIT (1/59-12/70) |
| (V-09) - HOPPER SUPPORT AND DRIVE | (417A) - INTERNATIONAL HARVESTER 4-ROW FERTILIZER UNIT (1/59-12/70) |
| (V-11) - HOPPER BRACKET AND FRAME EXTENSION | (417A) - INTERNATIONAL HARVESTER 4-ROW FERTILIZER UNIT (1/59-12/70) |
| (X-05) - HOPPER BRACKET AND FEED SHAFT | (422) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/59-12/70) |
| (AJ-03) - HOPPER MOUNTING AND DRIVE | (423) - INTERNATIONAL HARVESTER 4-ROW FERTILIZER UNIT (1/59-12/71) |
| (AK-03) - HOPPER SUPPORT AND DRIVE | (426) - INTERNATIONAL HARVESTER 4-ROW FERTILIZER UNIT (1/59-12/71) |
| (AK-04) - HOPPER BRACKET AND FRAME EXTENSION | (426) - INTERNATIONAL HARVESTER 4-ROW FERTILIZER UNIT (1/59-12/71) |
| (E-3) - HOPPER DRIVE, FEED SHAFT AND SUPPORTS | (43) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/62-12/65) |
| (F-4) - HOPPER SUPPORT AND FEED SHAFT | (56-D) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/48-12/58) |
| (S-09) - PACKER WHEEL UNIT, ONE PER ROW | (600) - INTERNATIONAL HARVESTER FERTILIZER PLANTER (1/70-12/70) |
| (AF-07) - HOPPER SUPPORT AND DRIVE UNIT | (609) - INTERNATIONAL HARVESTER 6-ROW FERTILIZER UNIT (1/58-12/63) |
| (V-07) - HOPPER SUPPORT AND DRIVE | (617) - INTERNATIONAL HARVESTER 6-ROW FERTILIZER UNIT (1/59-12/70) |
| (V-09) - HOPPER SUPPORT AND DRIVE | (617) - INTERNATIONAL HARVESTER 6-ROW FERTILIZER UNIT (1/59-12/70) |
| (V-11) - HOPPER BRACKET AND FRAME EXTENSION | (617) - INTERNATIONAL HARVESTER 6-ROW FERTILIZER UNIT (1/59-12/70) |
| (V-12) - FRAME EXTENSIONS, 6 ROWS | (617) - INTERNATIONAL HARVESTER 6-ROW FERTILIZER UNIT (1/59-12/70) |
| (AJ-03) - HOPPER MOUNTING AND DRIVE | (623) - INTERNATIONAL HARVESTER 6-ROW FERTILIZER UNIT (1/59-12/71) |
| (A-161) - DRY FERTILIZERS, DRIVE UNIT | (DRY) - FERTILIZER UNIT (4-ROW) - 1966 (1/66-12/88) |
| (C-24[A]) - LIQUID CHEMICAL FERTILIZERS, HOPPER BRACKET AND COMBINATION FEED SHAFT | (LIQUID) - CHEMICAL & FERTILIZER APPLICATOR EQUIPMENT (1/59-12/65) |
| (S-4) - FRAME AND ROTARY WHEEL | (U-212) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/56-12/58) |
| (T-08) - FRAME AND ROTARY WHEEL DRIVE | (U-214) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/56-12/56) |
| (T-10) - DRIVE UNIT | (U-214) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/56-12/56) |
| (T-12) - HOPPER SUPPORT AND FEED SHAFT | (U-214) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/56-12/56) |
| (T-08) - FRAME AND ROTARY WHEEL DRIVE | (U-214A) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/57-12/57) |
| (T-10) - DRIVE UNIT | (U-214A) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/57-12/57) |
| (T-12) - HOPPER SUPPORT AND FEED SHAFT | (U-214A) - INTERNATIONAL HARVESTER FERTILIZER UNIT (1/57-12/57) |
| (18) - MAIN DRIVE PARTS | (150) - INTERNATIONAL HARVESTER SHOVEL PRESS DRILL (1/60-12/88) |
| (38) - FERTILIZER DRIVE UNIT | (150) - INTERNATIONAL HARVESTER SHOVEL PRESS DRILL (1/60-12/88) |
| (45) - GRASS HOPPER DRIVE UNIT FOR 20 X 8 MACHINES | (150) - INTERNATIONAL HARVESTER SHOVEL PRESS DRILL (1/60-12/88) |
| (A-50) - BROME SEED DRIVE, MACHINE WITH HIGH FRONT MOUNTED GRASS SEED ATTACHMENT, BUILT 1973 SEASON AND SINCE | (510) - INTERNATIONAL HARVESTER END WHEEL GRAIN DRILL (1/68-12/79) |
| (190) - BROME SEED ATTACHMENT, HIGH FRONT MOUNTED DRIVE | (5100) - CASE IH END WHEEL GRAIN DRILL (1/88-12/90) |
| (A-05) - MAIN DRIVE | (620) - INTERNATIONAL HARVESTER GRAIN DRILL (1/80-12/88) |
| (A-18) - FERTILIZER DRIVE | (620) - INTERNATIONAL HARVESTER GRAIN DRILL (1/80-12/88) |
| (A-54) - POWER LIFT | (620) - INTERNATIONAL HARVESTER GRAIN DRILL (1/80-12/88) |
| (A-16) - MAIN DRIVE PARTS | (10) - INTERNATIONAL HARVESTER GRAIN DRILL (1/59-12/69) |
| (A-30) - FERTILIZER DRIVE PARTS | (10) - INTERNATIONAL HARVESTER GRAIN DRILL (1/59-12/69) |
| (A-37) - BROME AND GRASS DRIVE PARTS | (10) - INTERNATIONAL HARVESTER GRAIN DRILL (1/59-12/69) |
| (B-10) - MAIN DRIVE PARTS | (100) - INTERNATIONAL HARVESTER PRESS DRILL (1/67-12/69) |
| (B-21) - FERTILIZER DRIVE PARTS | (100) - INTERNATIONAL HARVESTER PRESS DRILL (1/67-12/69) |
| (B-27) - GRASS DRIVE PARTS | (100) - INTERNATIONAL HARVESTER PRESS DRILL (1/67-12/69) |
| (A-29) - DISK COVERING ATTACHMENT, CORN, ONE PER ROW | (80) - INTERNATIONAL HARVESTER TOOL BAR (1/65-12/70) |
| (A-30[A]) - PRESS WHEEL ATTACHMENT | (80) - INTERNATIONAL HARVESTER TOOL BAR (1/65-12/70) |
| (A-30) - DISK COVERING ATTACHMENT, CORN, MINIMUM TILLAGE PLANTER, ONE PER ROW | (80) - INTERNATIONAL HARVESTER TOOL BAR (1/65-12/70) |
| (E-16) - COUNTERSHAFT, ROCKSHAFT AND CENTER FRAME | (249) - MCCORMICK-INTERNATIONAL DRILL PLANTER (1/58-12/65) |
| (E-16) - COUNTERSHAFT, ROCKSHAFT AND CENTER FRAME | (250) - MCCORMICK-INTERNATIONAL POWER HILL DROP PLANTER (1/58-12/65) |
| (E-16) - COUNTERSHAFT, ROCKSHAFT AND CENTER FRAME | (449A) - MCCORMICK-INTERNATIONAL DRILL CORN PLANTER (1/57-12/65) |
| (E-16) - COUNTERSHAFT, ROCKSHAFT AND CENTER FRAME | (450A) - MCCORMICK-INTERNATIONAL POWER HILL DROP CORN PLANTER (1/57-12/65) |
| (E-16) - COUNTERSHAFT, ROCKSHAFT AND CENTER FRAME | (649) - MCCORMICK-INTERNATIONAL DRILL CORN PLANTER (1/58-12/65) |
| (E-16) - COUNTERSHAFT, ROCKSHAFT AND CENTER FRAME | (650) - MCCORMICK-INTERNATIONAL POWER HILL DROP CORN PLANTER (1/58-12/65) |
| (A-29) - DISK COVERING ATTACHMENT, CORN, ONE PER ROW | (80) - INTERNATIONAL HARVESTER LISTER (1/66-12/70) |
| (A-30[A]) - PRESS WHEEL ATTACHMENT | (80) - INTERNATIONAL HARVESTER LISTER (1/66-12/70) |
| (A-30) - DISK COVERING ATTACHMENT, CORN, MINIMUM TILLAGE PLANTER, ONE PER ROW | (80) - INTERNATIONAL HARVESTER LISTER (1/66-12/70) |
| (A-29) - DISK COVERING ATTACHMENT, CORN, ONE PER ROW | (80) - INTERNATIONAL HARVESTER MIDDLEBUSTER (1/65-12/70) |
| (A-30[A]) - PRESS WHEEL ATTACHMENT | (80) - INTERNATIONAL HARVESTER MIDDLEBUSTER (1/65-12/70) |
| (A-30) - DISK COVERING ATTACHMENT, CORN, MINIMUM TILLAGE PLANTER, ONE PER ROW | (80) - INTERNATIONAL HARVESTER MIDDLEBUSTER (1/65-12/70) |
| (D-07) - DRIVE SHAFT | (210) - MCCORMICK-INTERNATIONAL ROTARY CUTTER (1/61-12/64) |
| (D-12) - ADAPTING PACKAGE | (210) - MCCORMICK-INTERNATIONAL ROTARY CUTTER (1/61-12/64) |
| (C-14) - REAR FURROW WHEEL AND AXLE | (60) - INTERNATIONAL HARVESTER 2-FURROW MOLDBOARD PLOW (1/58-12/69) |
| (D-16) - REAR FURROW WHEEL AND AXLE | (60) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/60-12/70) |
| (D-16) - REAR FURROW WHEEL AND AXLE | (60L) - INTERNATIONAL HARVESTER 3-FURROW MOLDBOARD PLOW (1/58-12/70) |
| (E-14) - REAR FURROW WHEEL AND AXLE | (70) - INTERNATIONAL HARVESTER 3-FURROW MOLDBOARD PLOW (1/58-12/68) |
| (F-15) - REAR FURROW WHEEL AND AXLE | (70) - INTERNATIONAL HARVESTER 4-FURROW MOLDBOARD PLOW (1/58-12/68) |
| (E-14) - REAR FURROW WHEEL AND AXLE | (70L) - INTERNATIONAL HARVESTER 3-FURROW MOLDBOARD PLOW (1/58-12/72) |
| (F-15) - REAR FURROW WHEEL AND AXLE | (70L) - INTERNATIONAL HARVESTER 4-FURROW MOLDBOARD PLOW (1/58-12/72) |
| (A-14) - REAR FLANGED JOINT ASSEMBLY, FOR USE ON 720-1000RPM WITH SERIAL NO. 1999 AND BELOW | (720) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/88) |
| (A-17[A]) - CUTTERHEAD HALF JOINT ASSEMBLY | (720) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/88) |
| (A-17) - SINGLE REAR JOINT ASSEMBLY | (720) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/88) |
| (A-18) - GEAR BOX HALF JOINT ASSEMBLY | (720) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/88) |
| (A-21) - IMPLEMENT INPUT JOINT ASSEMBLY, 720 | (720) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/88) |
| (A-28) - FEED ELEMENT REVERSE DRIVE JOINT ASSY. | (720) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/88) |
| (A-36) - UPPER FEED SYSTEM | (720) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/88) |
| (B-18) - FRONT POWER DRIVE AND SHIELDS | (10) - INTERNATIONAL HARVESTER FLAIL CHOPPER (1/77-12/91) |
| (B-19) - REAR POWER DRIVE AND SHIELD, SLIP CLUTCH | (10) - INTERNATIONAL HARVESTER FLAIL CHOPPER (1/77-12/91) |
| (A-18) - FRONT POWER DRIVE AND SHIELDS | (7) - INTERNATIONAL HARVESTER FLAIL CHOPPER (1/63-12/69) |
| (A-20) - REAR POWER DRIVE, REGULAR | (7) - INTERNATIONAL HARVESTER FLAIL CHOPPER (1/63-12/69) |
| (A-22) - REAR POWER DRIVE AND SHIELD, SLIP CLUTCH | (7) - INTERNATIONAL HARVESTER FLAIL CHOPPER (1/63-12/69) |
| (A-18) - FRONT POWER DRIVE AND SHIELDS | (8) - INTERNATIONAL HARVESTER FLAIL CHOPPER (1/64-12/78) |
| (A-20) - REAR POWER DRIVE, REGULAR | (8) - INTERNATIONAL HARVESTER FLAIL CHOPPER (1/64-12/78) |
| (A-22) - REAR POWER DRIVE AND SHIELD, SLIP CLUTCH | (8) - INTERNATIONAL HARVESTER FLAIL CHOPPER (1/64-12/78) |
| (A-17) - POWER TAKE-OFF DRIVE | (51) - INTERNATIONAL HARVESTER POWER FORAGE FEEDER (1/63-12/88) |
| (B-13) - POWER DRIVE EQUIPMENT | (61) - INTERNATIONAL HARVESTER POWER FORAGE FEEDER W/INCLINED CONVEYOR (1/59-12/69) |
| (A-17[A]) - CUTTERHEAD HALF JOINT ASSEMBLY | (830) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/80) |
| (A-17) - SINGLE REAR JOINT ASSEMBLY | (830) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/80) |
| (A-18) - GEAR BOX HALF JOINT ASSEMBLY | (830) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/80) |
| (A-28) - FEED ELEMENT REVERSE DRIVE JOINT ASSY. | (830) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/80) |
| (A-36) - UPPER FEED SYSTEM | (830) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/80) |
| (B-11) - DOUBLE UNIVERSAL JOINTS, PIN TYPE YOKE, TRACTOR END | (40) - INTERNATIONAL HARVESTER SHREDDER (1/68-12/72) |
| (B-12) - DOUBLE UNIVERSAL JOINTS, CLAMP TYPE YOKE, BOTH ENDS | (40) - INTERNATIONAL HARVESTER SHREDDER (1/68-12/72) |
| (A-14) - FRONT POWER DRIVE AND SHIELDS, ROCKWELL, STANDARD | (6) - INTERNATIONAL HARVESTER SHREDDER MOWER (1/61-12/63) |
| (D-11) - DOUBLE UNIVERSAL JOINT, CLAMP TYPE YOKE, BOTH ENDS | (60) - INTERNATIONAL HARVESTER SHREDDER (1/73-12/86) |
| (A-05) - CONVEYOR BELT AND DRIVE | (45) - INTERNATIONAL HARVESTER BLOWER (1/60-12/10) |
| (A-11) - CONVEYOR DRIVE AND CLUTCH, 45 BLOWER | (45) - INTERNATIONAL HARVESTER BLOWER (1/60-12/10) |
| (A-14) - TRANSPORT AXLE AND FRAME | (45) - INTERNATIONAL HARVESTER BLOWER (1/60-12/10) |
| (A-16) - PTO DRIVE PARTS | (45) - INTERNATIONAL HARVESTER BLOWER (1/60-12/10) |
| (A-05) - CONVEYOR BELT AND DRIVE | (47) - INTERNATIONAL HARVESTER BLOWER (1/63-12/10) |
| (A-14) - TRANSPORT AXLE AND FRAME | (47) - INTERNATIONAL HARVESTER BLOWER (1/63-12/10) |
| (A-16) - PTO DRIVE PARTS | (47) - INTERNATIONAL HARVESTER BLOWER (1/63-12/10) |
| (B-11) - AUGER DRIVE YOKES AND SHAFT | (48) - INTERNATIONAL HARVESTER BLOWER (1/73-12/10) |
| (B-14) - POWER TAKE-OFF DRIVE, STANDARD | (48) - INTERNATIONAL HARVESTER BLOWER (1/73-12/10) |
| (13) - REAR UNIVERSAL, REX CHAIN-BELT INC., OPT W/REAR UNIVERSAL HAYES DANA | (1290) - INTERNATIONAL HARVESTER MOWER CONDITIONER (1/72-12/76) |
| (G-20) - POWER DRIVE, SHIELD AND RELATED PARTS | (816) - INTERNATIONAL HARVESTER 9FT MOWER CONDITIONER (1/65-12/69) |
| (G-26) - REEL DRIVE CONVERSION | (816) - INTERNATIONAL HARVESTER 9FT MOWER CONDITIONER (1/65-12/69) |
| (G-27) - REEL CONVERSION | (816) - INTERNATIONAL HARVESTER 9FT MOWER CONDITIONER (1/65-12/69) |
| (S-07) - TONGUE AND INPUT DRIVE | (990) - INTERNATIONAL HARVESTER MOWER CONDITIONER (1/69-12/78) |
| (S-09) - TONGUE AND INPUT DRIVE | (990) - INTERNATIONAL HARVESTER MOWER CONDITIONER (1/69-12/78) |
| (S-11) - UNIVERSAL JOINT DRIVE | (990) - INTERNATIONAL HARVESTER MOWER CONDITIONER (1/69-12/78) |
| (S-13) - UNIVERSAL JOINT DRIVE | (990) - INTERNATIONAL HARVESTER MOWER CONDITIONER (1/69-12/78) |
| (H-6) - DOUBLE UNIVERSAL PTO DRIVE | (70) - INTERNATIONAL HARVESTER MOWER (1/65-12/70) |
| (T-6) - POWER DRIVE EQUIPMENT | (111) - INTERNATIONAL HARVESTER ROTARY CUTTER (1/69-12/77) |
| (B-09) - UNIVERSAL ASSEMBLIES, FOR TRAILING TYPE ROTARY CUTTER / FOR FAST-HITCH ROTARY CUTTERS | (34U-FTC26) - MCCORMICK-INTERNATIONAL ROTARY CUTTER (1/57-12/62) |
| (S-16) - POWER DRIVE EQUIPMENT, FOR TWO OR THREE POINT HITCH | (411) - INTERNATIONAL HARVESTER TRAILING TYPE ROTARY CUTTER (1/67-12/77) |
| (S-17) - POWER DRIVE EQUIPMENT, THREE KNUCKLE PTO, FOR TRAIL HITCH | (411) - INTERNATIONAL HARVESTER TRAILING TYPE ROTARY CUTTER (1/67-12/77) |
| (S-18) - REAR POWER DRIVE AND SHIELD, FOR TRAILING HITCH | (411) - INTERNATIONAL HARVESTER TRAILING TYPE ROTARY CUTTER (1/67-12/77) |
| (A-12) - POWER DRIVE EQUIPMENT, TRAILING HITCH | (100) - INTERNATIONAL HARVESTER MOWER (1/58-12/68) |
| (A-13[A]) - TRAILING-HITCH, 1959, 1960 | (100) - INTERNATIONAL HARVESTER MOWER (1/58-12/68) |
| (A-13) - POWER DRIVE EQUIPMENT, ROCKWELL STANDARD, FAST-HITCH AND TRAILING HITCH FAST-HITCH, 1958, 1960 | (100) - INTERNATIONAL HARVESTER MOWER (1/58-12/68) |
| (A-14[A]) - TRAILING HITCH, 1960 AND SINCE | (100) - INTERNATIONAL HARVESTER MOWER (1/58-12/68) |
| (A-14) - POWER DRIVE EQUIPMENT, ROCKWELL STANDARD, FAST-HITCH AND TRAILING HITCH FAST-HITCH, 1960 AND SINCE | (100) - INTERNATIONAL HARVESTER MOWER (1/58-12/68) |
| (A-23) - POWER DRIVE ATTACHMENT, 1962 AND SINCE | (100) - INTERNATIONAL HARVESTER MOWER (1/58-12/68) |
| (A-24) - POWER DRIVE ATTACHMENT | (100) - INTERNATIONAL HARVESTER MOWER (1/58-12/68) |
| (A-25) - POWER DRIVE ATTACHMENT | (100) - INTERNATIONAL HARVESTER MOWER (1/58-12/68) |
| (K-14) - POWER DRIVE EQUIPMENT, W/O HAY CONDITIONER | (1000) - INTERNATIONAL HARVESTER BALANCED MOWER (1/68-12/82) |
| (K-15) - POWER DRIVE EQUIPMENT, W/O HAY CONDITIONER | (1000) - INTERNATIONAL HARVESTER BALANCED MOWER (1/68-12/82) |
| (K-16) - POWER DRIVE EQUIPMENT, W/HAY CONDITIONER | (1000) - INTERNATIONAL HARVESTER BALANCED MOWER (1/68-12/82) |
| (K-17) - POWER DRIVE EQUIPMENT, W/HAY CONDITIONER | (1000) - INTERNATIONAL HARVESTER BALANCED MOWER (1/68-12/82) |
| (B-03) - COUPLING BAR, BALANCING SPRING, LIFTING CHAIN AND TRUNNION | (105) - INTERNATIONAL HARVESTER MOWER (1/61-12/68) |
| (B-07) - POWER DRIVE EQUIPMENT, ROCKWELL STANDARD | (105) - INTERNATIONAL HARVESTER MOWER (1/61-12/68) |
| (C-05) - COUPLING BAR, SHOE HINGE AND BALANCING SPRING | (110) - INTERNATIONAL HARVESTER MOWER (1/60-12/68) |
| (C-09) - POWER DRIVE EQUIPMENT, ROCKWELL STANDARD | (110) - INTERNATIONAL HARVESTER MOWER (1/60-12/68) |
| (M-10) - POWER DRIVE EQUIPMENT, ROCKWELL STANDARD | (1110) - INTERNATIONAL HARVESTER BALANCED MOWER (1/68-12/76) |
| (E-08) - POWER DRIVE EQUIPMENT, ROCKWELL STANDARD | (115) - INTERNATIONAL HARVESTER MOWER (1/64-12/68) |
| (D-13) - POWER DRIVE EQUIPMENT, ROCKWELL STANDARD, NOT FOR USE WITH HAY CONDITIONER | (120) - INTERNATIONAL HARVESTER MOWER (1/61-12/68) |
| (D-14) - POWER DRIVE EQUIPMENT, ROCKWELL STANDARD | (120) - INTERNATIONAL HARVESTER MOWER (1/61-12/68) |
| (D-15) - POWER DRIVE ATTACHMENT, DOUBLE UNIVERSAL JOINTS | (120) - INTERNATIONAL HARVESTER MOWER (1/61-12/68) |
| (D-16) - POWER DRIVE ATTACHMENT, 1961-1962, ROCKWELL STANDARD | (120) - INTERNATIONAL HARVESTER MOWER (1/61-12/68) |
| (D-17) - POWER DRIVE ATTACHMENT, 1962, DOUBLE UNIVERSAL JOINTS | (120) - INTERNATIONAL HARVESTER MOWER (1/61-12/68) |
| (L-17) - POWER DRIVE EQUIPMENT, FOR 1200 AND 1300 ONLY | (1200) - INTERNATIONAL HARVESTER BALANCED MOWER (1/68-12/79) |
| (L-18) - POWER DRIVE EQUIPMENT, FOR 1200 AND 1300 W/HAY CONDITIONER | (1200) - INTERNATIONAL HARVESTER BALANCED MOWER (1/68-12/79) |
| (F-07) - MOWER DRIVE AND RELATED PARTS, NOT FOR USE W/HAY CONDITIONERS | (200) - INTERNATIONAL HARVESTER MOWER (1/65-12/88) |
| (F-09) - POWER DRIVE ATTACHMENT, FOR USE W/HAY CONDITIONERS | (200) - INTERNATIONAL HARVESTER MOWER (1/65-12/88) |
| (J-09) - MOWER DRIVE AND RELATED PARTS | (230) - INTERNATIONAL HARVESTER MOWER (1/67-12/77) |
| (N-09) - POWER DRIVE EQUIPMENT, ROCKWELL STANDARD | (3110) - INTERNATIONAL HARVESTER BALANCED MOWER (1/71-12/84) |
| (N-10) - FRONT POWER DRIVE EQUIPMENT, ROCKWELL STANDARD | (3110) - INTERNATIONAL HARVESTER BALANCED MOWER (1/71-12/84) |
| (C-10) - DOUBLE UNIVERSAL JOINTS, CLAMP TYPE YOKE, BOTH ENDS | (50) - INTERNATIONAL HARVESTER SHREDDER (1/73-12/86) |
| (D-17) - AXLE AND FIFTH WHEEL ASSY | (VARIOUS) - WAGONS (1/36-12/98) |
| (D-21) - AXLE AND FIFTH WHEEL ASSY | (VARIOUS) - WAGONS (1/36-12/98) |
| (A-18) - UNIVERSAL JOINTS, 14 RAKE | (14) - INTERNATIONAL HARVESTER SIDE DELIVERY RAKE (1/63-12/74) |
| (A-19) - UNIVERSAL JOINTS, 16 RAKE | (16) - INTERNATIONAL HARVESTER SIDE DELIVERY RAKE (1/63-12/70) |
| (D-07[A]) - SINGLE UNIVERSAL JOINT ASSY | (35) - INTERNATIONAL HARVESTER SIDE DELIVERY RAKE (1/69-12/88) |
| (D-07) - DOUBLE UNIVERSAL DRIVE JOINT | (35) - INTERNATIONAL HARVESTER SIDE DELIVERY RAKE (1/69-12/88) |
| (34) - LIFT ASSEMBLY | (86) - INTERNATIONAL HARVESTER SIDE DELIVERY RAKE (1/80-12/89) |
| (B-09) - DRIVE SHAFT | (9) - INTERNATIONAL HARVESTER SIDE DELIVERY RAKE (1/65-12/73) |
| (G-04) - WHEELS AND WHEEL DRIVE, GROUND DRIVE RAKES | (96) - INTERNATIONAL HARVESTER RAKE (1/70-12/89) |
| (G-13) - LIFT ASSEMBLY | (96) - INTERNATIONAL HARVESTER RAKE (1/70-12/89) |
| (20) - WHEELS AND WHEEL DRIVE, 96 AND 97 GROUND DRIVE RAKES (CONT'D) | (96) - INTERNATIONAL HARVESTER SIDE DELIVERY RAKE (1/70-12/89) |
| (34) - LIFT ASSEMBLY | (96) - INTERNATIONAL HARVESTER SIDE DELIVERY RAKE (1/70-12/89) |
| (20) - WHEELS AND WHEEL DRIVE, 96 AND 97 GROUND DRIVE RAKES (CONT'D) | (97) - INTERNATIONAL HARVESTER RAKE (1/70-12/89) |
| (34) - LIFT ASSEMBLY | (97) - INTERNATIONAL HARVESTER RAKE (1/70-12/89) |
| (E-03) - MAIN DRIVE | (200) - INTERNATIONAL HARVESTER RATION RITE TRAILING SILAGE MIXER (1/75-12/77) |
| (F-03) - MAIN DRIVE | (300) - INTERNATIONAL HARVESTER RATION RITE TRAILING SILAGE MIXER (1/75-12/77) |
| (A-23) - POWER DRIVE AND SHIELDS | (85) - INTERNATIONAL HARVESTER GRINDER-MIXER (1/64-12/67) |
| (B-23) - POWER DRIVE AND SHIELDS, 1967 TO 1968 | (850) - INTERNATIONAL HARVESTER GRINDER-MIXER (1/67-12/69) |
| (B-24) - UNIVERSAL JOINTS, STANDARD, 1969 | (850) - INTERNATIONAL HARVESTER GRINDER-MIXER (1/67-12/69) |
| (B-25) - UNIVERSAL JOINTS, HEAVY DUTY, 1969 | (850) - INTERNATIONAL HARVESTER GRINDER-MIXER (1/67-12/69) |
| (C-25) - UNIVERSAL JOINTS, STANDARD DUTY ROCKWELL STANDARD | (950) - INTERNATIONAL HARVESTER GRINDER-MIXER (1/69-12/88) |
| (C-26) - UNIVERSAL JOINTS, HEAVY DUTY ROCKWELL STANDARD, IDENTIFIED BY RS | (950) - INTERNATIONAL HARVESTER GRINDER-MIXER (1/69-12/88) |
| (C-27) - UNIVERSAL JOINTS, HEAVY DUTY REX CHAINBELT, IDENTIFIED BY RS | (950) - INTERNATIONAL HARVESTER GRINDER-MIXER (1/69-12/88) |
| (A-23) - POWER DRIVE AND SHIELDS | (105) - INTERNATIONAL HARVESTER GRINDER-MIXER (1/64-12/67) |
| (B-23) - POWER DRIVE AND SHIELDS, 1967 TO 1968 | (1050) - INTERNATIONAL HARVESTER GRINDER-MIXER (1/67-12/69) |
| (B-24) - UNIVERSAL JOINTS, STANDARD, 1969 | (1050) - INTERNATIONAL HARVESTER GRINDER-MIXER (1/67-12/69) |
| (B-25) - UNIVERSAL JOINTS, HEAVY DUTY, 1969 | (1050) - INTERNATIONAL HARVESTER GRINDER-MIXER (1/67-12/69) |
| (C-25) - UNIVERSAL JOINTS, STANDARD DUTY ROCKWELL STANDARD | (1150) - INTERNATIONAL HARVESTER GRINDER-MIXER (1/69-12/88) |
| (C-26) - UNIVERSAL JOINTS, HEAVY DUTY ROCKWELL STANDARD, IDENTIFIED BY RS | (1150) - INTERNATIONAL HARVESTER GRINDER-MIXER (1/69-12/88) |
| (C-27) - UNIVERSAL JOINTS, HEAVY DUTY REX CHAINBELT, IDENTIFIED BY RS | (1150) - INTERNATIONAL HARVESTER GRINDER-MIXER (1/69-12/88) |
| (D-06[A]) - FRONT UNIVERSAL, 540 RPM, ROCKWELL, STANDARD | (125) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/61-12/66) |
| (D-07[A]) - FRONT UNIVERSAL, 1000 RPM, ROCKWELL, STANDARD | (125) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/61-12/66) |
| (D-09[B]) - SIDE DRIVE SHAFT | (125) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/61-12/66) |
| (D-10) - SIDE DRIVE SHAFT UNIVERSAL, ROCKWELL, STANDARD | (125) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/61-12/66) |
| (D-11) - MAIN DRIVE GEAR CASE | (125) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/61-12/66) |
| (D-16) - RATCHET WHEEL | (125) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/61-12/66) |
| (B-05) - AXLE | (101) - MCCORMICK-INTERNATIONAL GROUND DRIVE MANURE SPREADER (1/60-12/74) |
| (C-09) - FRONT UNIVERSAL JOINT, 540 RPM, ROCKWELL,STANDARD | (102) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/60-12/66) |
| (C-10[A]) - FRONT UNIVERSAL JOINT, 1000 RPM, ROCKWELL, STANDARD | (102) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/60-12/66) |
| (C-12[B]) - SIDE DRIVE SHAFT | (102) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/60-12/66) |
| (F-04[B]) - PTO UNIVERSAL (1000 RPM) (ROCKWELL - STANDARD) | (103) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/62-12/66) |
| (F-05) - PTO UNIVERSAL (540 RPM) (ROCKWELL - STANDARD) | (103) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/62-12/66) |
| (N-6) - AUGER DRIVE UNIVERSAL | (1100) - INTERNATIONAL LIQUID SPREADER (1/67-12/72) |
| (O-6) - POWER TAKE OFF UNIVERSAL (540 RPM) | (1150) - INTERNATIONAL LIQUID MANURE PUMP (1/67-12/74) |
| (O-7) - POWER TAKE OFF UNIVERSAL (1000 RPM) | (1150) - INTERNATIONAL LIQUID MANURE PUMP (1/67-12/74) |
| (H-07) - FRONT DRIVE UNIVERSAL ASSEMBLY (540 RPM) (ROCKWELL-STANDARD) | (130) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/64-12/72) |
| (H-09) - FRONT DRIVE UNIVERSAL ASSEMBLY (1000 RPM) (ROCKWELL-STANDARD | (130) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/64-12/72) |
| (H-14) - SIDE DRIVE CLUTCH AND SHAFT | (130) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/64-12/72) |
| (H-15) - SIDE DRIVE UNIVERSAL ASSEMBLY (ROCKWELL-STANDARD) | (130) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/64-12/72) |
| (H-16) - MAIN DRIVE GEAR CASE | (130) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/64-12/72) |
| (H-18) - RATCHET WHEEL | (130) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/64-12/72) |
| (H-19) - RATCHET WHEEL (SHEAR BOLT TYPE), (FOR USE ON MACHINES BUILT SEPTEMBER 1969 & SINCE) | (130) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/64-12/72) |
| (N-6) - AUGER DRIVE UNIVERSAL | (1400) - INTERNATIONAL LIQUID SPREADER (1/67-12/72) |
| (E-06[A]) - FRONT PTO UNIVERSAL,540 RPM, ROCKWELLSTANDARD) | (150) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/61-12/66) |
| (E-07[A]) - FRONT PTO UNIVERSAL (1000 RPM) (ROCKWELL-STANDARD) | (150) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/61-12/66) |
| (E-11) - SIDE DRIVE SHAFT UNIVERSAL (ROCKWELL-STANDARD) | (150) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/61-12/66) |
| (E-12) - MAIN DRIVE GEAR CASE | (150) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/61-12/66) |
| (E-13) - RATCHET WHEEL | (150) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/61-12/66) |
| (E-18) - UPPER BEATER | (150) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/61-12/66) |
| (J-08) - FRONT DRIVE UNIVERSAL ASSEMBLY (540 RPM) (ROCKWELL-STANDARD) | (155) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/64-12/72) |
| (J-10) - FRONT DRIVE UNIVERSAL ASSEMBLY (1000 RPM) (ROCKWELL-STANDARD | (155) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/64-12/72) |
| (J-15) - SIDE DRIVE SHAFT UNIVERSAL ASSEMBLY (ROCKWELL-STANDARD) | (155) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/64-12/72) |
| (J-18) - MAIN DRIVE GEAR CASE | (155) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/64-12/72) |
| (J-20) - RATCHET WHEEL | (155) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/64-12/72) |
| (J-21) - RATCHET WHEEL (SHEAR BOLT TYPE), (FOR USE ON MACHINES BUILT SEPTEMBER 1969 & SINCE) | (155) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/64-12/72) |
| (G-06[A]) - FRONT UNIVERSAL (540 RPM) (ROCKWELL-STANDARD) | (160) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/63-12/72) |
| (G-07[A]) - FRONT PTO UNIVERSAL (1000 RPM) (ROCKWELL-STANDARD) | (160) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/63-12/72) |
| (G-11) - MAIN DRIVE GEAR CASE | (160) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/63-12/72) |
| (L-42) - BUNK FEED BOX CONVEYOR DRIVE, (1970 AND SINCE) | (275) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/65-12/73) |
| (L-48) - BUNK FEED EXTENSION CONVEYOR DRIVE, (1970 AND SINCE) | (275) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/65-12/73) |
| (A-09) - MAIN DRIVE UNIVERSAL, ROCKWELL, 540 RPM | (555) - INTERNATIONAL HARVESTER MANURE SPREADER (1/72-12/77) |
| (A-06) - AXLE | (75) - MCCORMICK-INTERNATIONAL GROUND DRIVE MANURE SPREADER (1/60-12/72) |
| (A-09) - RATCHET WHEEL | (75) - MCCORMICK-INTERNATIONAL GROUND DRIVE MANURE SPREADER (1/60-12/72) |
| (E-03) - SUBFRAME AND MOUNTING SUPPORT | (1000) - INTERNATIONAL HARVESTER LOADER - CUB TRACTOR EQUIPMENT (1/62-12/75) |
| (C-4) - HOPPER BRACKET AND SUPPORT | (101A) - INTERNATIONAL HARVESTER FERTILIZER - CUB TRACTOR EQUIPMENT (1/55-12/81) |
| (G-27) - COUPLING BAR, BALANCING SPRING, LIFTING CHAIN AND TRUNNION SHAFT | (105) - INTERNATIONAL HARVESTER ROTARY MOWER - CUB TRACTOR EQUIPMENT (1/61-12/69) |
| (G-30) - POWER DRIVE EQUIPMENT, ROCKWELL STANDARD | (105) - INTERNATIONAL HARVESTER ROTARY MOWER - CUB TRACTOR EQUIPMENT (1/61-12/69) |
| (T-6) - UNIVERSAL JOINT DRIVE, STANDARD | (71) - INTERNATIONAL HARVESTER INDUSTRIAL MOWER (1/71-12/77) |
| (T-7) - UNIVERSAL JOINT DRIVE, HEAVY DUTY | (71) - INTERNATIONAL HARVESTER INDUSTRIAL MOWER (1/71-12/77) |
| (G-46) - PTO DRIVE SHAFT | (C-2) - INTERNATIONAL HARVESTER ROTARY MOWER - CUB TRACTOR EQUIPMENT (1/60-12/78) |
| (E-19) - FRONT POWER DRIVE EQUIPMENT STANDARD, FOR TRAILING TYPE | (211) - INTERNATIONAL HARVESTER TRAILING TYPE ROTARY CUTTER (12/64-12/75) |
| (E-21) - POWER DRIVE EQUIPMENT, ROCKWELL, STANDARD,, FOR TWO OR THREE POINT HITCH | (211) - INTERNATIONAL HARVESTER TRAILING TYPE ROTARY CUTTER (12/64-12/75) |
| (E-22) - REAR POWER DRIVE AND SHIELD, ROCKWELL, STANDARD, FOR THREE KNUCKLE PTO DRIVE | (211) - INTERNATIONAL HARVESTER TRAILING TYPE ROTARY CUTTER (12/64-12/75) |
| (E-30[A]) - ADAPTING PACKAGE | (211) - INTERNATIONAL HARVESTER TRAILING TYPE ROTARY CUTTER (12/64-12/75) |
| (B-09) - UNIVERSAL ASSEMBLIES, FOR TRAILING TYPE ROTARY CUTTER / FOR FAST-HITCH ROTARY CUTTERS | (26) - MCCORMICK-INTERNATIONAL ROTARY CUTTER (1/57-12/62) |
| (D-07) - DRIVE SHAFT | (28) - MCCORMICK-INTERNATIONAL ROTARY CUTTER (1/58-12/64) |
| (D-12) - ADAPTING PACKAGE | (28) - MCCORMICK-INTERNATIONAL ROTARY CUTTER (1/58-12/64) |
| (B-09) - UNIVERSAL ASSEMBLIES, FOR TRAILING TYPE ROTARY CUTTER / FOR FAST-HITCH ROTARY CUTTERS | (2CK-FTC26) - MCCORMICK-INTERNATIONAL ROTARY CUTTER (1/57-12/62) |
| (F-17) - POWER DRIVE EQUIPMENT (ROCKWELL STANDARD), (FOR TWO OR THREE-POINT HITCH) | (310) - MCCORMICK-INTERNATIONAL ROTARY CUTTER (1/62-12/66) |
| (F-18) - FRONT POWER DRIVE EQUIPMENT (ROCKWELL STANDARD), (FOR TRAILING TYPE) | (310) - MCCORMICK-INTERNATIONAL ROTARY CUTTER (1/62-12/66) |
| (F-20) - POWER DRIVE EQUIPMENT (ROCKWELL STANDARD), (FOR TRAILING TYPE) | (310) - MCCORMICK-INTERNATIONAL ROTARY CUTTER (1/62-12/66) |
| (F-22) - ADAPTING PACKAGE | (310) - MCCORMICK-INTERNATIONAL ROTARY CUTTER (1/62-12/66) |
| (Q-15) - POWER DRIVE EQUIPMENT, FOR TWO OR THREE POINT HITCH | (311) - INTERNATIONAL HARVESTER TRAILING TYPE ROTARY CUTTER (1/66-12/75) |
| (Q-16) - POWER DRIVE EQUIPMENT, THREE KNUCKLE PTO, FOR TRAIL HITCH | (311) - INTERNATIONAL HARVESTER TRAILING TYPE ROTARY CUTTER (1/66-12/75) |
| (Q-17) - REAR POWER DRIVE AND SHIELD, FOR TRAILING HITCH | (311) - INTERNATIONAL HARVESTER TRAILING TYPE ROTARY CUTTER (1/66-12/75) |
| (Q-21[A]) - ADAPTING PACKAGES | (311) - INTERNATIONAL HARVESTER TRAILING TYPE ROTARY CUTTER (1/66-12/75) |
| (U-6) - POWER EQUIPMENT | (400) - INTERNATIONAL HARVESTER ROTARY CUTTER (1/73-12/77) |
| (F-17) - POWER DRIVE EQUIPMENT (ROCKWELL STANDARD), (FOR TWO OR THREE-POINT HITCH) | (410) - MCCORMICK-INTERNATIONAL ROTARY CUTTER (1/62-12/66) |
| (F-18) - FRONT POWER DRIVE EQUIPMENT (ROCKWELL STANDARD), (FOR TRAILING TYPE) | (410) - MCCORMICK-INTERNATIONAL ROTARY CUTTER (1/62-12/66) |
| (F-20) - POWER DRIVE EQUIPMENT (ROCKWELL STANDARD), (FOR TRAILING TYPE) | (410) - MCCORMICK-INTERNATIONAL ROTARY CUTTER (1/62-12/66) |
| (F-22) - ADAPTING PACKAGE | (410) - MCCORMICK-INTERNATIONAL ROTARY CUTTER (1/62-12/66) |
| (G-10) - FRONT POWER DRIVE | (510) - MCCORMICK-INTERNATIONAL ROTARY CUTTER (1/70-12/72) |
| (G-11) - REAR POWER DRIVE AND SHIELD, ROCKWELL STANDARD | (510) - MCCORMICK-INTERNATIONAL ROTARY CUTTER (1/70-12/72) |
| (R-10) - REAR POWER DRIVE AND SHIELD | (711) - INTERNATIONAL HARVESTER TRAILING TYPE ROTARY CUTTER (1/66-12/70) |
| (R-11) - POWER DRIVE EQUIPMENT | (711) - INTERNATIONAL HARVESTER TRAILING TYPE ROTARY CUTTER (1/66-12/70) |
| (J-10) - PTO DRIVE SHAFT, LEAF MULCHER, PRODUCT GRAPHICS | (C-2) - INTERNATIONAL HARVESTER ROTARY CUTTER (1/58-12/78) |
| (B-13) - MAIN DRIVE GEAR CASE | (2400) - INTERNATIONAL HARVESTER ROUND BALER (1/79-12/86) |
| (B-09) - UNIVERSAL JOINT DRIVE | (2400) - INTERNATIONAL HARVESTER ROUND BALER (1/79-12/86) |
| (A-15) - MAIN DRIVE GEAR CASE | (241) - INTERNATIONAL HARVESTER BIGROLL ROUND BALER (1/74-12/79) |
| (A-09) - UNIVERSAL JOINT DRIVE | (241) - INTERNATIONAL HARVESTER BIGROLL ROUND BALER (1/74-12/79) |
| (8-40) - POWER LIFT, CONT'D | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (9-106) - MAIN DRIVE | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (9-124) - FERTILIZER DRIVE | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (31.220.06) - PTO DRIVESHAFTS 87607920 AND 87638239 | (1240) - PIVOT TRANSPORT PLANTER EARLY RISER SERIES (7/08-12/13) |
| (B-06) - FERTILIZER DRIVE AND CONNECTIONS, SERIAL NO. 652 AND ABOVE | (80) - INTERNATIONAL HARVESTER CULTIVATOR (1/77-12/88) |
| (B-08) - FERTILIZER DRIVE AND CONNECTIONS, SERIAL NO. 651 AND BELOW | (80) - INTERNATIONAL HARVESTER CULTIVATOR (1/77-12/88) |
| (D-10) - REAR POWER DRIVE | (350) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/66-12/73) |
| (D-13) - FRONT POWER DRIVE AND SHIELDS, ROCKWELL STANDARD | (350) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/66-12/73) |
| (D-14) - FRONT POWER DRIVE ATTACHMENT | (350) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/66-12/73) |
| (A-023) - CUTTER HEAD DRIVE FOR POWER TAKE-OFF DRIVE (BORG-WARNER & ROCKWELL STANDARD) (REGULAR & HEAVY DUTY) | (50) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/62-12/65) |
| (B-10) - REAR POWER DRIVE AND SHIELD | (55) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/65-12/66) |
| (B-12) - FRONT POWER DRIVE AND SHIELDS, ROCKWELL STANDARD | (55) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/65-12/66) |
| (B-14) - CUTTER HEAD DRIVE, ROCKWELL STANDARD | (55) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/65-12/66) |
| (B-17) - UPPER APRON | (55) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/65-12/66) |
| (C-012) - REAR DRIVE AND SHIELD | (550) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/66-12/72) |
| (C-014) - FRONT POWER DRIVE AND SHIELDS | (550) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/66-12/72) |
| (C-021) - UPPER APRON, SERIAL NO. 3000 AND BELOW | (550) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/66-12/72) |
| (F-008) - REAR POWER DRIVE AND SHIELDING, POWERLINE | (555) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/73-12/75) |
| (F-016) - FRONT POWER DRIVE AND SHIELDS | (555) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/73-12/75) |
| (E-007) - FRONT POWER DRIVE, REAR HALF | (650) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/70-12/75) |
| (E-017) - REAR POWER DRIVE AND SHIELDS | (650) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/70-12/75) |
| (E-018) - FRONT POWER DRIVE, FRONT HALF | (650) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/70-12/75) |
| (E-020) - CUTTER HEAD DRIVE | (650) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/70-12/75) |
| (E-021) - CUTTER HEAD AND DRIVE | (650) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/70-12/75) |
| (9A-002) - TELESCOPING DRIVE SHAFT, 781 FORAGE HARVESTER, 1000 RPM PTO, PRIOR TO PIN JAG185259 | (781) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/86) |
| (9A-004) - TELESCOPING DRIVE SHAFT, 781 FORAGE HARVESTER, 1000 RPM PTO, PIN JAG185259 AND AFTER | (781) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/86) |
| (9A-006) - TELESCOPING DRIVE SHAFT, 781 FORAGE HARVESTER 540 RPM PTO | (781) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/86) |
| (9A-022) - UNIVRSL JOINTS, 781 INPUT SIDE OF 90 DEG GEARBOX , 1000 RPM PTO, 881 INPUT SIDE OF 90 DEG GEARBOX | (781) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/86) |
| (9A-024) - UNIVERSAL JOINT, OUTPUT SIDE OF 90-DEGREE GEARBOX | (781) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/86) |
| (9A-026) - UNIVERSAL JOINTS, 781 INPUT SIDE OF SPEED CHANGE GEARBOX 540 RPM PTO / 781 & 881 CUTTERHEAD | (781) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/86) |
| (9A-040) - UNIVERSAL JOINTS, FEED ROLL AND FEED ROLL REVERSE DRIVE | (781) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/86) |
| (9A-042) - UPPER FEED SYSTEM | (781) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/86) |
| (9C-08) - POWER FEED | (781) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/86) |
| (9D-08) - POWER FEED | (781) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/86) |
| (9A-022) - UNIVRSL JOINTS, 781 INPUT SIDE OF 90 DEG GEARBOX , 1000 RPM PTO, 881 INPUT SIDE OF 90 DEG GEARBOX | (881) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/92) |
| (9A-024) - UNIVERSAL JOINT, OUTPUT SIDE OF 90-DEGREE GEARBOX | (881) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/92) |
| (9A-026) - UNIVERSAL JOINTS, 781 INPUT SIDE OF SPEED CHANGE GEARBOX 540 RPM PTO / 781 & 881 CUTTERHEAD | (881) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/92) |
| (9A-040) - UNIVERSAL JOINTS, FEED ROLL AND FEED ROLL REVERSE DRIVE | (881) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/92) |
| (9A-042) - UPPER FEED SYSTEM | (881) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/92) |
| (9C-08) - POWER FEED | (881) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/92) |
| (9D-08) - POWER FEED | (881) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/92) |
| (9-004) - MAIN DRIVE SHAFT AND SUPPORTS | (1682) - CASE IH PULL-TYPE AXIAL-FLOW COMBINE (1/87-12/91) |
| (07-03) - DRIVE TRAIN, MAIN DRIVE SHIELDS AND SUPPORTS | (1482) - INTERNATIONAL HARVESTER PULL BEHIND COMBINE (1/80-12/86) |
| (07-05) - DRIVE TRAIN, POWER TAKE OFF KNUCKLE, REXNORD | (1482) - INTERNATIONAL HARVESTER PULL BEHIND COMBINE (1/80-12/86) |
| (056) - BAIL PIVOT FRAME AND PLATFORM LIFT FRAME, FULL LEVELING ONLY | (403) - INTERNATIONAL HARVESTER HILLSIDE COMBINE (1/63-12/72) |
| (050) - SEPARATOR, HOOD AND SERVICE LADDER | (403) - INTERNATIONAL HARVESTER HILLSIDE COMBINE (1/63-12/72) |
| (103) - STEERING, ROSS GEAR, SERIAL NO. 501 TO 1860 AND 2510 TO 7278 | (303) - INTERNATIONAL HARVESTER COMBINE (BEAN SPECIAL) (1/62-12/68) |
| (Q-09) - PLATFORMS, KNIFE AND KNIFE DRIVE | (315) - INTERNATIONAL HARVESTER COMBINE (1/67-12/70) |
| (116) - STEERING ROSS GEAR, SERIAL NO 501 TO 868 AND 951 TO 2431 | (503) - INTERNATIONAL HARVESTER COMBINE (1/62-12/69) |
| (20-15) - SEPARATOR, STRAW CHOPPER, DRIVE, SERIAL NO. 2580 AND BELOW | (615) - INTERNATIONAL HARVESTER COMBINE (1/71-12/75) |
| (20-17) - SEPARATOR, STRAW CHOPPER, DRIVE, SERIAL NO. 2581 AND ABOVE | (615) - INTERNATIONAL HARVESTER COMBINE (1/71-12/75) |
| (R-20) - SEPARATOR, VARIABLE CYLINDER DRIVE, SERIAL NO. 1972 AND BELOW | (815) - INTERNATIONAL HARVESTER COMBINE (1/69-12/73) |
| (R-24) - SEPARATOR, VARIABLE CYLINDER DRIVE, SERIAL NO. 1973 AND ABOVE | (815) - INTERNATIONAL HARVESTER COMBINE (1/69-12/73) |
| (21-07) - THRESHING CYLINDER AND CONCAVE, VARIABLE CYLINDER DRIVE | (815) - INTERNATIONAL HARVESTER COMBINE (S/N 8001 & AFTER) (1/74-12/78) |
| (R-20) - SEPARATOR, VARIABLE CYLINDER DRIVE, SERIAL NO. 1249 AND BELOW | (915) - INTERNATIONAL HARVESTER COMBINE (S/N 8000 & BEFORE) (1/69-12/73) |
| (R-23) - SEPARATOR, VARIABLE CYLINDER DRIVE, SERIAL NO. 1250 AND ABOVE | (915) - INTERNATIONAL HARVESTER COMBINE (S/N 8000 & BEFORE) (1/69-12/73) |
| (21-08) - THRESHING CYLINDER AND CONCAVE, VARIABLE CYLINDER DRIVE | (915) - INTERNATIONAL HARVESTER COMBINE (S/N 8001 & AFTER) (1/78-12/78) |
| (103) - STEERING, ROSS GEAR, SERIAL NO. 501 TO 1589 AND 2196 TO 7224 | (403) - INTERNATIONAL HARVESTER COMBINE (1/62-12/71) |
| (07-04) - DRIVE TRAIN, POWER TAKE-OFF KNUCKLE, ROCKWELL, WITH METAL SHEILD | (914) - INTERNATIONAL PULL-TYPE COMBINE (BEFORE S/N 8001) (1/68-12/74) |
| (07-05) - DRIVE TRAIN, POWER TAKE-OFF KNUCKLE, DANA, WITH BLACK PLASTIC SHEILD | (914) - INTERNATIONAL PULL-TYPE COMBINE (BEFORE S/N 8001) (1/68-12/74) |
| (07-2) - DRIVE TRAIN, MAIN DRIVE GEAR CASE | (914) - INTERNATIONAL PULL-TYPE COMBINE (BEFORE S/N 8001) (1/68-12/74) |
| (07-1) - DRIVE TRAIN, MAIN DRIVE GEAR CASE | (914) - INTERNATIONAL PULL-TYPE COMBINE (S/N 8001 & AFTER) (1/75-12/79) |
| (07-4) - DRIVE TRAIN, POWER TAKE-OFF KNUCKLE, ROCKWELL WITH METAL SHIELD | (914) - INTERNATIONAL PULL-TYPE COMBINE (S/N 8001 & AFTER) (1/75-12/79) |
| (07-5) - DRIVE TRAIN, POWER TAKE-OFF KNUCKLE, DANA WITH BLACK PLASTIC | (914) - INTERNATIONAL PULL-TYPE COMBINE (S/N 8001 & AFTER) (1/75-12/79) |
| (21-04) - THRESHING CYLINDER AND CONCAVE, CYLINDER CHAIN DRIVE | (914) - INTERNATIONAL PULL-TYPE COMBINE (S/N 8001 & AFTER) (1/75-12/79) |
| (5-16) - STEERING AXLE, 1822 COTTON PICKER | (1822) - CASE IH COTTON PICKER (S/N JJC0012691 & AFTER) (7/89-12/93) |
| (5-18) - STEERING AXLE, 1822 COTTON PICKER | (1822) - CASE IH COTTON PICKER W/NAVISTAR ENGINE (1/88-12/93) |
| (5-20) - STEERING AXLE, 1844 COTTON PICKER | (1844) - CASE IH COTTON PICKER (S/N JJC0002462 & AFTER) (7/89-12/93) |
| (9A-016) - SHIELDED TELESCOPING SHAFT GEAR BOX TO GEAR BOX, 1844 COTTON PICKER | (1844) - CASE IH COTTON PICKER (S/N JJC0002462 & AFTER) (7/89-12/93) |
| (5-22) - STEERING AXLE, 1844 COTTON PICKER | (1844) - CASE IH COTTON PICKER W/NAVISTAR ENGINE (1/88-12/93) |
| (9-014) - SHIELDED TELESCOPING SHAFT, GEAR BOX TO GEAR BOX, 1844 COTTON PICKER | (1844) - CASE IH COTTON PICKER W/NAVISTAR ENGINE (1/88-12/93) |
| (182) - STEERING SHAFTS | (414) - INTERNATIONAL HARVESTER COTTON PICKER (1/60-12/77) |
| (182) - STEERING SHAFTS | (420) - INTERNATIONAL HARVESTER COTTON PICKER (1/60-12/77) |
| (R-26) - PICKER DRUM, DRUM ROTOR AND DRIVE | (616) - INTERNATIONAL HARVESTER COTTON PICKER (1/80-12/88) |
| (B-04) - POWER TRAIN, PROPULSION VARIABLE SPEED DRIVE, BELT DRIVE | (616) - INTERNATIONAL HARVESTER COTTON PICKER (1/80-12/88) |
| (B-19) - POWER TRAIN, DRUM DRIVE FRONT HALF SHAFT, HYDROSTATIC DRIVE | (616) - INTERNATIONAL HARVESTER COTTON PICKER (1/80-12/88) |
| (B-24) - POWER TRAIN, FAN DRIVE AND IDLERS, HYDROSTATIC DRIVE, 616 | (616) - INTERNATIONAL HARVESTER COTTON PICKER (1/80-12/88) |
| (R-26) - PICKER DRUM, DRUM ROTOR AND DRIVE | (622) - INTERNATIONAL HARVESTER COTTON PICKER (1/80-12/88) |
| (B-04) - POWER TRAIN, PROPULSION VARIABLE SPEED DRIVE, BELT DRIVE | (622) - INTERNATIONAL HARVESTER COTTON PICKER (1/80-12/88) |
| (B-19) - POWER TRAIN, DRUM DRIVE FRONT HALF SHAFT, HYDROSTATIC DRIVE | (622) - INTERNATIONAL HARVESTER COTTON PICKER (1/80-12/88) |
| (B-24) - POWER TRAIN, FAN DRIVE AND IDLERS, HYDROSTATIC DRIVE, 616 | (622) - INTERNATIONAL HARVESTER COTTON PICKER (1/80-12/88) |
| (5-132) - GUIDE WHEEL PIVOT | (782) - CASE IH COTTON PICKER (5/86-12/87) |
| (9-338) - DRUM ROTOR AND DRIVE | (782) - CASE IH COTTON PICKER (5/86-12/87) |
| (9-420) - AUXILIARY DRUM DRIVE, FOR MACHINES WITHOUT AUTOMATIC DRUM DRIVE | (782) - CASE IH COTTON PICKER (5/86-12/87) |
| (9-424) - AUXILIARY DRUM DRIVE | (782) - CASE IH COTTON PICKER (5/86-12/87) |
| (9-428) - DRUM DRIVE FRONT JOINT ASSEMBLY | (782) - CASE IH COTTON PICKER (5/86-12/87) |
| (5-132) - GUIDE WHEEL PIVOT | (782) - INTERNATIONAL HARVESTER COTTON PICKER (1/71-12/87) |
| (9-338) - DRUM ROTOR AND DRIVE | (782) - INTERNATIONAL HARVESTER COTTON PICKER (1/71-12/87) |
| (9-420) - AUXILIARY DRUM DRIVE, FOR MACHINES WITHOUT AUTOMATIC DRUM DRIVE | (782) - INTERNATIONAL HARVESTER COTTON PICKER (1/71-12/87) |
| (9-424) - AUXILIARY DRUM DRIVE | (782) - INTERNATIONAL HARVESTER COTTON PICKER (1/71-12/87) |
| (9-428) - DRUM DRIVE FRONT JOINT ASSEMBLY | (782) - INTERNATIONAL HARVESTER COTTON PICKER (1/71-12/87) |
| (A-17) - STALK ROLL CONTROL | (227) - INTERNATIONAL HARVESTER CORN HEAD (1/63-12/70) |
| (A-06) - FEEDER FRAME, LIFT, STAND AND FEEDER CONVEYOR, 228 & 229 CORN HEAD | (228) - INTERNATIONAL HARVESTER CORN HEAD (1/63-12/70) |
| (A-17) - STALK ROLL CONTROL | (228) - INTERNATIONAL HARVESTER CORN HEAD (1/63-12/70) |
| (A-06) - FEEDER FRAME, LIFT, STAND AND FEEDER CONVEYOR, 228 & 229 CORN HEAD | (229) - INTERNATIONAL HARVESTER CORN HEAD (1/63-12/70) |
| (A-17) - STALK ROLL CONTROL | (229) - INTERNATIONAL HARVESTER CORN HEAD (1/63-12/70) |
| (B-07) - TRACTOR MOUNTINGS, MAIN FRAME SUPPORT, BRACKET AND CLAMP CASE 730 AND 830 TRACTOR | (234) - INTERNATIONAL HARVESTER CORN HARVESTER (1/64-12/65) |
| (B-09) - TRACTOR MOUNTINGS, MAIN FRAME SUPPORT, BRACKET AND CLAMP DEERE 3010, 3020, 4010, AND 4020 TRACTOR | (234) - INTERNATIONAL HARVESTER CORN HARVESTER (1/64-12/65) |
| (C-02) - HUSKER, HUSKERS ROLL AND DRIVE | (234) - INTERNATIONAL HARVESTER CORN HARVESTER (1/64-12/65) |
| (C-10) - HUSKER, HUSKER CONVEYOR AND EAR CONVEYOR | (234) - INTERNATIONAL HARVESTER CORN HARVESTER (1/64-12/65) |
| (H-14) - STALK ROLL CONTROL | (327WN) - INTERNATIONAL HARVESTER CORN HEAD (1/67-12/68) |
| (C-13) - STALK ROLL CONTROL | (328N) - INTERNATIONAL HARVESTER CORN HEAD (1/64-12/73) |
| (E-15) - STALK ROLL CONTROL | (328WN) - INTERNATIONAL HARVESTER CORN HEAD (1/66-12/70) |
| (C-13) - STALK ROLL CONTROL | (329N) - INTERNATIONAL HARVESTER CORN HEAD (1/64-12/73) |
| (E-15) - STALK ROLL CONTROL | (329WN) - INTERNATIONAL HARVESTER CORN HEAD (1/66-12/70) |
| (B-13) - STALK ROLL CONTROL | (429) - INTERNATIONAL HARVESTER CORN HEAD (1/63-12/73) |
| (D-13) - STALK ROLL CONTROL | (429N) - INTERNATIONAL HARVESTER CORN HEAD (1/64-12/73) |
| (F-15) - STALK ROLL CONTROL | (429WN) - INTERNATIONAL HARVESTER CORN HEAD (1/66-12/73) |
| (B-13) - STALK ROLL CONTROL | (430) - INTERNATIONAL HARVESTER CORN HEAD (1/63-12/73) |
| (D-13) - STALK ROLL CONTROL | (430N) - INTERNATIONAL HARVESTER CORN HEAD (1/64-12/73) |
| (F-15) - STALK ROLL CONTROL | (430WN) - INTERNATIONAL HARVESTER CORN HEAD (1/66-12/73) |
| (J-14) - STALK ROLL CONTROL | (620N) - INTERNATIONAL HARVESTER CORN HEAD (1/67-12/68) |
| (G-15) - STALK ROLL CONTROL | (630N) - INTERNATIONAL HARVESTER CORN HEAD (1/66-12/68) |
| (K-04) - GATHERER AND GATHERER DRIVE | (724) - INTERNATIONAL HARVESTER CORN HEAD (S/N 513 & AFTER) (1/71-12/73) |
| (K-20) - FEEDER AND FEED CONVEYOR | (724) - INTERNATIONAL HARVESTER CORN HEAD (S/N 513 & AFTER) (1/71-12/73) |
| (L-22) - STALK ROLL CONTROL, 733 S/N 575 & BELOW, 734 S/N 536 & BELOW | (733) - INTERNATIONAL HARVESTER CORN HEAD (1/69-12/73) |
| (M-21) - STALK ROLL CONTROL, 743 S/N 979 & BELOW, 744 S/N 2019 & BELOW | (743) - INTERNATIONAL HARVESTER CORN HEAD (1/69-12/73) |
| (Q-22) - STALK ROLL CONTROL, SERIAL NO. 509 AND BELOW | (762) - INTERNATIONAL HARVESTER CORN HEAD (1/69-12/73) |
| (N-24) - STALK ROLL CONTROL, 763CH SERIAL NO. 895 AND BELOW | (763) - INTERNATIONAL HARVESTER CORN HEAD (1/69-12/73) |
| (P-22) - STALK ROLL CONTROL, SERIAL NO. 512 AND BELOW | (782) - INTERNATIONAL HARVESTER CORN HEAD (1/69-12/73) |
| (9-114) - AUGER AND KNIFE DRIVE SHAFT, 15.0, 17.5 AND 20.0 FOOT HEADER, HAYES-DANA | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-120) - AUGER AND KNIFE DRIVE SHAFT, 22.5, 25.0 AND 30.0 FOOT HEADER, HAYES-DANA | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9C-26) - AUGER AND KNIFE DRIVE SHAFT, 15, 16-1/2, 17-1/2 AND 20 FOOT HEADER, HAYES-DANA | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9C-32) - AUGER AND KNIFE DRIVE SHAFT, 22-1/2, 25 AND 30 FOOT HEADER, HAYES-DANA | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (037) - SNAPPING UNIT DRIVE | (2-PR) - INTERNATIONAL HARVESTER CORN PICKER (1/53-12/74) |
| (107) - INNER AND OUTER GATHERER CHAIN IDLER ROLLER PACKAGE | (2-PR) - INTERNATIONAL HARVESTER CORN PICKER (1/53-12/74) |
| (9-050) - DRIVE SHAFT, 1190 MOWER CONDITIONER, HAYES-DANA, ROCKWELL AND REXNORD | (1190) - CASE IH MOWER CONDITIONER (1/77-12/88) |
| (9-052) - DRIVE SHAFT, 1190 MOWER CONDITIONER, HAYES-DANA, ROCKWELL AND REXNORD | (1190) - CASE IH MOWER CONDITIONER (1/77-12/88) |
| (9-054) - DRIVE SHAFT, 1190 MOWER CONDITIONER, WEASLER | (1190) - CASE IH MOWER CONDITIONER (1/77-12/88) |
| (9-056) - DRIVE SHAFT, 1190 MOWER CONDITIONER, WEASLER | (1190) - CASE IH MOWER CONDITIONER (1/77-12/88) |
| (9-036) - AUGER, AUGER DRIVE AND KNIFE DRIVE, 1490 AND 1590 MOWER CONDITIONER | (1490) - CASE IH MOWER CONDITIONER (1/85-12/88) |
| (9-046) - CONDITIONING ROLL DRIVE, 1490 AND 1590 MOWER CONDITIONER | (1490) - CASE IH MOWER CONDITIONER (1/85-12/88) |
| (9-036) - AUGER, AUGER DRIVE AND KNIFE DRIVE, 1490 AND 1590 MOWER CONDITIONER | (1590) - CASE IH MOWER CONDITIONER (1/85-12/88) |
| (9-046) - CONDITIONING ROLL DRIVE, 1490 AND 1590 MOWER CONDITIONER | (1590) - CASE IH MOWER CONDITIONER (1/85-12/88) |
| (9-04) - LIFT ASSEMBLY | (860) - CASE IH RAKE (1/85-12/89) |
| (9-04) - LIFT ASSEMBLY | (960) - CASE IH RAKE (1/85-12/89) |
| (9-04) - LIFT ASSEMBLY | (970) - CASE IH RAKE (1/85-12/89) |
| (Q-22) - PLATFORM, PLATFORM UNIVERSAL, ROCKWELL STANDARD | (225) - INTERNATIONAL HARVESTER HAY SWATHER (1/69-12/75) |
| (Q-23) - PLATFORM, PLATFORM UNIVERSAL, HAYES | (225) - INTERNATIONAL HARVESTER HAY SWATHER (1/69-12/75) |
| (A-069[A]) - UNIVERSAL JOINT, ROCKWELL-STANDARD, MACHINES BUILT 1963 TO 1966, CANVAS AND GREEN PEA BAR PLATFORM | (201) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/61-12/66) |
| (A-069) - UNIVERSAL JOINT, ROCKWELL-STANDARD, MACHINES BUILT 1961 TO 1962, CANVAS PLATFORM | (201) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/61-12/66) |
| (A-070[A]) - UNIVERSAL JOINT, HAYES SPICER STEEL PRODUCTS, AUGER PLATFORM, NOT CANVAS OR GREEN PEA BAR PLATFORM | (201) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/61-12/66) |
| (A-071) - UNIVERSAL JOINT, ROCKWELL STANDARD, AUGER PLATFORM, NOT CANVAS OR GREEN PEA BAR PLATFORM | (201) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/61-12/66) |
| (D-012) - UNIVERSAL JOINT, 1000 RPM, ROCKWELL-STANDARD | (201) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/61-12/66) |
| (D-013[A]) - UNIVERSAL JOINT, 1000 RPM, HAYES STEEL | (201) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/61-12/66) |
| (D-013) - UNIVERSAL JOINT, 540 RPM, HAYES STEEL | (201) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/61-12/66) |
| (D-014[A]) - POWER TAKE-OFF, 1000 RPM, HAYES STEEL | (201) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/61-12/66) |
| (D-014) - POWER TAKE-OFF, 540 RPM, HAYES STEEL | (201) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/61-12/66) |
| (D-015[A]) - POWER TAKE-OFF, 1000 RPM, ROCKWELL-STANDARD | (201) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/61-12/66) |
| (D-015) - POWER TAKE-OFF, 540 RPM, ROCKWELL-STANDARD | (201) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/61-12/66) |
| (16-07) - PLATFORM, PLATFORM UNIVERSAL (ROCKWELL STANDARD) | (230) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/71-12/76) |
| (Q-05[A]) - PLATFORMS, PLATFORM UNIVERSAL, HAYES-SPICER, SINGLE AUGER PLATFORM | (275) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (Q-05) - PLATFORMS, PLATFORM UNIVERSAL, ROCKWELL-STANDARD, SINGLE AUGER PLATFORM | (275) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (Q-13[A]) - PLATFORMS, PLATFORM UNIVERSAL-HAYES | (275) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (Q-22) - PLATFORMS, PLATFORM DRIVE UNIVERSAL, ROCKWELL, STANDARD | (275) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (Q-05[A]) - PLATFORMS, PLATFORM UNIVERSAL, HAYES-SPICER, SINGLE AUGER PLATFORM | (375) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (Q-05) - PLATFORMS, PLATFORM UNIVERSAL, ROCKWELL-STANDARD, SINGLE AUGER PLATFORM | (375) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (Q-13[A]) - PLATFORMS, PLATFORM UNIVERSAL-HAYES | (375) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (Q-22) - PLATFORMS, PLATFORM DRIVE UNIVERSAL, ROCKWELL, STANDARD | (375) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (07-25) - DRIVE TRAIN, UNIVERSAL JOINT HEADER TO CHASSIS WITH OUT PROTECTIVE SHIELD | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-26) - DRIVE TRAIN, UNIVERSAL JOINT HEADER TO CHASSIS WITH PROTECTIVE SHIELD | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-25) - DRIVE TRAIN, UNIVERSAL JOINT HEADER TO CHASSIS WITH OUT PROTECTIVE SHIELD | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-26) - DRIVE TRAIN, UNIVERSAL JOINT HEADER TO CHASSIS WITH PROTECTIVE SHIELD | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-25) - DRIVE TRAIN, UNIVERSAL JOINT HEADER TO CHASSIS WITH OUT PROTECTIVE SHIELD | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-26) - DRIVE TRAIN, UNIVERSAL JOINT HEADER TO CHASSIS WITH PROTECTIVE SHIELD | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (9B-70) - UNIVERSAL JOINTS, ROCKWELL STANDARD | (1250) - CASE IH GRINDER-MIXER (1/78-12/86) |
| (9B-72) - UNIVERSAL JOINTS, REX CHAIN BELT | (1250) - CASE IH GRINDER-MIXER (1/78-12/86) |
| (9B-18) - MAIN DRIVE, 1350 MACHINES | (1350) - CASE IH GRINDER-MIXER (1/78-12/86) |
| (9B-70) - UNIVERSAL JOINTS, ROCKWELL STANDARD | (1350) - CASE IH GRINDER-MIXER (1/78-12/86) |
| (9B-72) - UNIVERSAL JOINTS, REX CHAIN BELT | (1350) - CASE IH GRINDER-MIXER (1/78-12/86) |
| (B-18) - REAR APRON SHAFT | (570) - INTERNATIONAL HARVESTER TRUCK MOUNTED MANURE SPREADER (1/73-12/77) |
| (B-45) - BUNK FEED CONVEYOR SHAFT | (570) - INTERNATIONAL HARVESTER TRUCK MOUNTED MANURE SPREADER (1/73-12/77) |
| (B-49) - BUNK FEED EXTENSION, DRIVE | (570) - INTERNATIONAL HARVESTER TRUCK MOUNTED MANURE SPREADER (1/73-12/77) |
| (9-84) - MAIN DRIVE UNIVERSAL JOINT, 540 RPM, ROCKWELL | (575) - CASE IH MANURE SPREADER (1/90-12/91) |
| (B-18) - REAR APRON SHAFT | (580) - INTERNATIONAL HARVESTER TRUCK MOUNTED MANURE SPREADER (1/73-12/77) |
| (B-45) - BUNK FEED CONVEYOR SHAFT | (580) - INTERNATIONAL HARVESTER TRUCK MOUNTED MANURE SPREADER (1/73-12/77) |
| (B-49) - BUNK FEED EXTENSION, DRIVE | (580) - INTERNATIONAL HARVESTER TRUCK MOUNTED MANURE SPREADER (1/73-12/77) |
| (9-84) - MAIN DRIVE UNIVERSAL JOINT, 540 RPM, ROCKWELL | (595) - CASE IH MANURE SPREADER (1/90-12/91) |
| (A-03) - CHASSIS,RADIATOR & SHEET METAL, FRAME,SUB FRAME,BOLSTER,REAR COVERS,CHANNELS, SUPPORT, RELATED PARTS | (4156) - INTERNATIONAL 4WD DIESEL TRACTOR (1/69-12/69) |
| (H-11) - CONTROLS, CLUTCH CONTROLS AND TRANSMISSION BRAKE | (4156) - INTERNATIONAL 4WD DIESEL TRACTOR (1/69-12/69) |
| (H-15) - CONTROLS, WHEEL BRAKE PEDAL AND CONNECTIONS | (4156) - INTERNATIONAL 4WD DIESEL TRACTOR (1/69-12/69) |
| (B-09) - POWER TRAIN, FRONT AXLE AND CONNECTIONS, LESS DIFFERENTIAL CARRIER & BRAKES | (4156) - INTERNATIONAL 4WD DIESEL TRACTOR (1/69-12/69) |
| (B-13) - POWER TRAIN, REAR AXLE AND CONNECTIONS, LESS DIFFERENTIAL CARRIER & BRAKES | (4156) - INTERNATIONAL 4WD DIESEL TRACTOR (1/69-12/69) |
| (14-01) - SUSPENSION, SUB-FRAME, FRONT AND REAR PIVOT SHAFTS AND RELATED PARTS | (4166) - INTERNATIONAL 4WD DIESEL TRACTOR (1/72-12/72) |
| (07-03) - DRIVE TRAIN, CLUTCH CONTROLS AND TRANSMISSION BRAKE | (4166) - INTERNATIONAL 4WD DIESEL TRACTOR (1/72-12/72) |
| (07-20) - DRIVE TRAIN, FRONT AXLE AND CONNECTIONS, LESS DIFFERENTIAL CARRIER AND BRAKES | (4166) - INTERNATIONAL 4WD DIESEL TRACTOR (1/72-12/72) |
| (07-23) - DRIVE TRAIN, REAR AXLE AND CONNECTIONS, LESS DIFFERENTIAL CARRIER AND BRAKES | (4166) - INTERNATIONAL 4WD DIESEL TRACTOR (1/72-12/72) |
| (04-01) - BRAKES, WHEEL BRAKE PEDAL AND CONNECTIONS | (4166) - INTERNATIONAL 4WD DIESEL TRACTOR (1/72-12/72) |
| (14-01) - SUSPENSION, SUB-FRAME, FRONT AND REAR PIVOT SHAFTS AND RELATED PARTS | (4186) - INTERNATIONAL 4WD DIESEL TRACTOR (1/76-12/79) |
| (07-03) - DRIVE TRAIN, CLUTCH CONTROLS AND TRANSMISSION BRAKE | (4186) - INTERNATIONAL 4WD DIESEL TRACTOR (1/76-12/79) |
| (07-20) - DRIVE TRAIN, FRONT AXLE AND CONNECTIONS, LESS DIFFERENTIAL CARRIER AND BRAKES | (4186) - INTERNATIONAL 4WD DIESEL TRACTOR (1/76-12/79) |
| (07-23) - DRIVE TRAIN, REAR AXLE AND CONNECTIONS, LESS DIFFERENTIAL CARRIER AND BRAKES | (4186) - INTERNATIONAL 4WD DIESEL TRACTOR (1/76-12/79) |
| (04-01) - BRAKES, WHEEL BRAKE PEDAL AND CONNECTIONS | (4186) - INTERNATIONAL 4WD DIESEL TRACTOR (1/76-12/79) |
| (07-03) - DRIVE TRAIN, CLUTCH CONTROLS AND CONNECTIONS | (6388) - INTERNATIONAL 4WD DIESEL TRACTOR (1/81-12/83) |
| (07-03) - DRIVE TRAIN, CLUTCH CONTROLS AND CONNECTIONS | (6588) - INTERNATIONAL 4WD DIESEL TRACTOR (1/81-12/83) |
| (07-03) - DRIVE TRAIN, CLUTCH CONTROLS AND CONNECTIONS | (6788) - INTERNATIONAL 4WD DIESEL TRACTOR (1/81-12/83) |
| (10-07) - HYDRAULICS, TOUCH-CONTROL SYSTEM, ROCKSHAFT AND SUPPORTS | (130) - FARMALL TRACTOR (1/56-12/58) |
| (10-09) - HYDRAULICS, TOUCH CONTROL SYSTEM, ROCKSHAFT AND SUPPORTS | (130) - FARMALL TRACTOR (1/56-12/58) |
| (09-5) - FRAME, FAST-HITCH | (130) - FARMALL TRACTOR (1/56-12/58) |
| (10-07) - HYDRAULICS, TOUCH-CONTROL SYSTEM, ROCKSHAFT AND SUPPORTS | (140) - FARMALL GAS TRACTOR (1/58-12/79) |
| (10-09) - HYDRAULICS, TOUCH CONTROL SYSTEM, ROCKSHAFT AND SUPPORTS | (140) - FARMALL GAS TRACTOR (1/58-12/79) |
| (09-5) - FRAME, FAST-HITCH | (140) - FARMALL GAS TRACTOR (1/58-12/79) |
| (162) - REAR FRAME AND DRIVING MECHANISMS, FORWARD AND REVERSE DRIVE | (504) - FARMALL DIESEL TRACTOR (1/61-12/68) |
| (162) - REAR FRAME AND DRIVING MECHANISMS, FORWARD AND REVERSE DRIVE | (504) - FARMALL GAS TRACTOR (1/60-12/68) |
| (07-05) - DRIVE TRAIN, CLUTCH CONTROLS AND TRANSMISSION BRAKE, GEAR DRIVE TRACTORS | (HYDRO 100) - INTERNATIONAL TRACTOR (1/71-12/76) |
| (10-17) - HYDRAULIC, POWER STEERING CYLINDER & CONNECTIONS, TRACTORS W/ ALL WHEEL DRIVE, S/N 11080 AND ABOVE | (HYDRO 186) - INTERNATIONAL DIESEL TRACTOR (1/76-12/78) |
| (162) - REAR FRAME AND DRIVING MECHANISMS, FORWARD AND REVERSE DRIVE | (504) - INTERNATIONAL GAS TRACTOR (1/62-12/68) |
| (131) - CLUTCH, CLUTCH CONNECTIONS & HAND OPERATED TORQUE AMPLIFIER CONTROLS, INTERNATIONAL 560 & 660 SERIES | (660) - INTERNATIONAL GAS TRACTOR (1/59-12/63) |
| (A-03) - CHASSIS,RADIATOR & SHEET METAL,FRAME,SUB FRAME,BOLSTER,REAR COVERS CHANNELS,SUPPORTS & RELATED PARTS | (4100) - INTERNATIONAL 4WD DIESEL TRACTOR (1/66-12/68) |
| (H-11) - CONTROLS, CLUTCH CONTROLS AND TRANSMISSION BRAKE | (4100) - INTERNATIONAL 4WD DIESEL TRACTOR (1/66-12/68) |
| (H-15) - CONTROLS, WHEEL BRAKE PEDAL AND CONNECTIONS | (4100) - INTERNATIONAL 4WD DIESEL TRACTOR (1/66-12/68) |
| (B-09) - POWER TRAIN, FRONT AXLE AND CONNECTIONS, LESS DIFFERENTIAL CARRIER AND BRAKES | (4100) - INTERNATIONAL 4WD DIESEL TRACTOR (1/66-12/68) |
| (B-13) - POWER TRAIN, REAR AXLE AND CONNECTIONS, LESS DIFFERENTIAL CARRIER & BRAKES | (4100) - INTERNATIONAL 4WD DIESEL TRACTOR (1/66-12/68) |
| (198) - DRAWBARS & HITCHES, BEAM COUPLINGS, DRAWBAR, SIDEPLATES & CONNECTIONS | (460) - INTERNATIONAL DIESEL TRACTOR (1/58-12/63) |
| (064) - LUBRICATION SYSTEM, CRANKCASE OIL PAN, OIL PUMP AND OIL PUMP, DIESEL ENGINE TRACTORS | (460) - INTERNATIONAL DIESEL TRACTOR (1/58-12/63) |
| (121) - REAR FRAME & DRIVING MECHANISMS, FORWARD & REVERSE DRIVE | (460) - INTERNATIONAL DIESEL TRACTOR (1/58-12/63) |
| (198) - DRAWBARS & HITCHES, BEAM COUPLINGS, DRAWBAR, SIDEPLATES & CONNECTIONS | (460) - INTERNATIONAL GAS TRACTOR (1/58-12/63) |
| (064) - LUBRICATION SYSTEM, CRANKCASE OIL PAN, OIL PUMP AND OIL PUMP, DIESEL ENGINE TRACTORS | (460) - INTERNATIONAL GAS TRACTOR (1/58-12/63) |
| (121) - REAR FRAME & DRIVING MECHANISMS, FORWARD & REVERSE DRIVE | (460) - INTERNATIONAL GAS TRACTOR (1/58-12/63) |
| (086) - LUBRICATION SYSTEM, CRANKCASE OIL PAN, OIL PUMP AND OIL PUMP SHAFT SUPPORT, DIESEL ENGINE TRACTORS | (560) - INTERNATIONAL DIESEL TRACTOR (1/58-12/63) |
| (131) - CLUTCH, CLUTCH CONNECTIONS & HAND OPERATED TORQUE AMPLIFIER CONTROLS, INTERNATIONAL 560 & 660 SERIES | (560) - INTERNATIONAL DIESEL TRACTOR (1/58-12/63) |
| (131) - CLUTCH, CLUTCH CONNECTIONS & HAND OPERATED TORQUE AMPLIFIER CONTROLS, INTERNATIONAL 560 & 660 SERIES | (560) - INTERNATIONAL GAS TRACTOR (1/58-12/63) |
| (114) - REAR FRAME AND DRIVING MECHANISMS, FORWARD AND REVERSE DRIVE | (606) - INTERNATIONAL GAS TRACTOR (1/62-12/67) |
| (10-07) - HYDRAULICS, TOUCH-CONTROL SYSTEM, ROCKSHAFT AND SUPPORTS | (INTERNATIONAL) - CUB LO-BOY TRACTOR (1/58-12/58) |
| (09-04) - FRAME, FAST-HITCH, CUB TRACTORS, BAIL, DRAFT LINK, PULL BAR AND SUPPORTS | (INTERNATIONAL) - CUB LO-BOY TRACTOR (1/58-12/58) |
| (10-07) - HYDRAULICS, TOUCH-CONTROL SYSTEM, ROCKSHAFT AND SUPPORTS | (INTERNATIONAL) - CUB TRACTOR (1/47-12/75) |
| (09-04) - FRAME, FAST-HITCH, CUB TRACTORS, BAIL, DRAFT LINK, PULL BAR AND SUPPORTS | (INTERNATIONAL) - CUB TRACTOR (1/47-12/75) |
| (07-05) - DRIVE TRAIN, CLUTCH CONTROLS AND TRANSMISSION BRAKE, GEAR DRIVE TRACTORS | (1066) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/78) |
| (10-22) - HYDRAULIC, POWER STEERING CYLINDER AND CONNECTIONS, MODELS WITH ALL WHEEL DRIVE | (1086) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (07-05) - DRIVE TRAIN, CLUTCH CONTROLS AND TRANSMISSION BRAKE, GEAR DRIVE TRACTORS | (1466) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/77) |
| (07-05) - DRIVE TRAIN, CLUTCH CONTROLS AND TRANSMISSION BRAKE, GEAR DRIVE TRACTORS | (1468) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/76) |
| (07-04) - DRIVE TRAIN, CLUTCH CONTROLS AND CONNECTIONS | (1486) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (07-57) - DRIVE TRAIN, PLANETARY STEERING AXLE, TRACTORS WITH ALL WHEEL DRIVE | (1486) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (07-58) - DRIVE TRAIN, PLANETARY STEERING AXLE, TRACTORS WITH ALL WHEEL DRIVE | (1486) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (10-22) - HYDRAULIC, POWER STEERING CYLINDER AND CONNECTIONS, MODELS WITH ALL WHEEL DRIVE | (1486) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (07-04) - DRIVE TRAIN, CLUTCH CONTROLS AND TRANSMISSION BRAKE | (1566) - INTERNATIONAL DIESEL TRACTOR (1/73-12/78) |
| (07-04) - DRIVE TRAIN, CLUTCH CONTROLS AND TRANSMISSION BRAKE | (1568) - INTERNATIONAL DIESEL TRACTOR (1/74-12/78) |
| (07-03) - DRIVE TRAIN, CLUTCH CONTROLS AND CONNECTIONS | (1586) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (07-34) - DRIVE TRAIN, PLANETARY STEERING AXLE, TRACTORS WITH ALL WHEEL DRIVE, ELWOOD FRONT AXLE | (1586) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (07-35) - DRIVE TRAIN, PLANETARY STEERING AXLE, TRACTORS WITH ALL WHEEL DRIVE, ELWOOD FRONT AXLE | (1586) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (10-20) - HYDRAULIC, POWER STEERING CYLINDER & CONNECTIONS, TRACTORS WITH ALL WHEEL DRIVE & ELWOOD FRONT AXLE | (1586) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (07-03) - DRIVE TRAIN, CLUTCH CONTROLS AND CONNECTIONS | (3088) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (07-34) - DRIVE TRAIN, PLANETARY STEERING AXLE, TRACTORS WITH ALL WHEEL DRIVE, WITH ONE PIECE DRIVE SHAFT | (3088) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (07-35) - DRIVE TRAIN, PLANETARY STEERING AXLE, TRACTORS WITH ALL WHEEL DRIVE, WITH ONE PIECE DRIVE SHAFT | (3088) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (10-23) - HYDRAULICS, POWER STEERING CYLINDER & CONNECTIONS,TRACTORS W/ALL WHEEL DRIVE W/ONE PIECE DRIVE SHAFT | (3088) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (10-24) - HYDRAULICS, POWER STEERING CYLINDER & CONNECTIONS,TRACTORS W/ALL WHEEL DRIVE W/TWO PIECE DRIVE SHAFT | (3088) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (07-03) - DRIVE TRAIN, CLUTCH CONTROLS AND CONNECTIONS | (3288) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (07-34) - DRIVE TRAIN, PLANETARY STEERING AXLE, TRACTORS WITH ALL WHEEL DRIVE, WITH ONE PIECE DRIVE SHAFT | (3288) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (07-35) - DRIVE TRAIN, PLANETARY STEERING AXLE, TRACTORS WITH ALL WHEEL DRIVE, WITH ONE PIECE DRIVE SHAFT | (3288) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (10-23) - HYDRAULICS, POWER STEERING CYLINDER & CONNECTIONS,TRACTORS W/ALL WHEEL DRIVE W/ONE PIECE DRIVE SHAFT | (3288) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (10-24) - HYDRAULICS, POWER STEERING CYLINDER & CONNECTIONS,TRACTORS W/ALL WHEEL DRIVE W/TWO PIECE DRIVE SHAFT | (3288) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (07-03) - DRIVE TRAIN, CLUTCH CONTROLS AND CONNECTIONS | (3388) - INTERNATIONAL ARTICULATED TRACTOR (1/79-12/81) |
| (07-38) - DRIVE TRAIN, PLANETARY STEERING AXLE, TRACTORS WITH ALL WHEEL DRIVE, WITH ONE PIECE DRIVE SHAFT | (3488) - INTERNATIONAL HYDROSTATIC TRACTOR (1/81-12/86) |
| (10-10) - HYDRAULICS, POWER STEERING CYLINDER & CONNECTIONS, TRACTORS W/ALL WHEEL DRIVE W/ 1-PIECE DRIVE SHAFT | (3488) - INTERNATIONAL HYDROSTATIC TRACTOR (1/81-12/86) |
| (10-11) - HYDRAULICS, POWER STEERING CYLINDER & CONNECTIONS, TRACTORS W/ALL WHEEL DRIVE W/ 2-PIECE DRIVE SHAFT | (3488) - INTERNATIONAL HYDROSTATIC TRACTOR (1/81-12/86) |
| (07-03) - DRIVE TRAIN, CLUTCH CONTROLS AND CONNECTIONS | (3588) - INTERNATIONAL ARTICULATED TRACTOR (1/78-12/81) |
| (07-03) - DRIVE TRAIN, CLUTCH CONTROLS AND CONNECTIONS | (3688) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (07-34) - DRIVE TRAIN, PLANETARY STEERING AXLE, TRACTORS WITH ALL WHEEL DRIVE, WITH ONE PIECE DRIVE SHAFT | (3688) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (07-35) - DRIVE TRAIN, PLANETARY STEERING AXLE, TRACTORS WITH ALL WHEEL DRIVE, WITH ONE PIECE DRIVE SHAFT | (3688) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (10-23) - HYDRAULICS, POWER STEERING CYLINDER & CONNECTIONS,TRACTORS W/ALL WHEEL DRIVE W/ONE PIECE DRIVE SHAFT | (3688) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (10-24) - HYDRAULICS, POWER STEERING CYLINDER & CONNECTIONS,TRACTORS W/ALL WHEEL DRIVE W/TWO PIECE DRIVE SHAFT | (3688) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (07-03) - DRIVE TRAIN, CLUTCH CONTROLS AND CONNECTIONS | (3688HC) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (07-34) - DRIVE TRAIN, PLANETARY STEERING AXLE, TRACTORS WITH ALL WHEEL DRIVE, WITH ONE PIECE DRIVE SHAFT | (3688HC) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (07-35) - DRIVE TRAIN, PLANETARY STEERING AXLE, TRACTORS WITH ALL WHEEL DRIVE, WITH ONE PIECE DRIVE SHAFT | (3688HC) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (10-23) - HYDRAULICS, POWER STEERING CYLINDER & CONNECTIONS,TRACTORS W/ALL WHEEL DRIVE W/ONE PIECE DRIVE SHAFT | (3688HC) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (10-24) - HYDRAULICS, POWER STEERING CYLINDER & CONNECTIONS,TRACTORS W/ALL WHEEL DRIVE W/TWO PIECE DRIVE SHAFT | (3688HC) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (07-03) - DRIVE TRAIN, CLUTCH CONTROLS AND CONNECTIONS | (3788) - INTERNATIONAL ARTICULATED TRACTOR (1/80-12/81) |
| (07-05) - DRIVE TRAIN, CLUTCH CONTROLS AND TRANSMISSION BRAKE, GEAR DRIVE TRACTORS | (766) - INTERNATIONAL 66 SERIES TRACTOR (1/71-12/78) |
| (07-04) - DRIVE TRAIN, CLUTCH CONTROLS AND CONNECTIONS | (786) - INTERNATIONAL DIESEL TRACTOR (1/80-12/80) |
| (07-57) - DRIVE TRAIN, PLANETARY STEERING AXLE, TRACTORS WITH ALL WHEEL DRIVE | (786) - INTERNATIONAL DIESEL TRACTOR (1/80-12/80) |
| (07-58) - DRIVE TRAIN, PLANETARY STEERING AXLE, TRACTORS WITH ALL WHEEL DRIVE | (786) - INTERNATIONAL DIESEL TRACTOR (1/80-12/80) |
| (10-22) - HYDRAULIC, POWER STEERING CYLINDER AND CONNECTIONS, MODELS WITH ALL WHEEL DRIVE | (786) - INTERNATIONAL DIESEL TRACTOR (1/80-12/80) |
| (07-04) - DRIVE TRAIN, CLUTCH CONTROLS AND CONNECTIONS | (886) - INTERNATIONAL DIESEL TRACTOR (1/76-12/80) |
| (07-57) - DRIVE TRAIN, PLANETARY STEERING AXLE, TRACTORS WITH ALL WHEEL DRIVE | (886) - INTERNATIONAL DIESEL TRACTOR (1/76-12/80) |
| (07-58) - DRIVE TRAIN, PLANETARY STEERING AXLE, TRACTORS WITH ALL WHEEL DRIVE | (886) - INTERNATIONAL DIESEL TRACTOR (1/76-12/80) |
| (10-22) - HYDRAULIC, POWER STEERING CYLINDER AND CONNECTIONS, MODELS WITH ALL WHEEL DRIVE | (886) - INTERNATIONAL DIESEL TRACTOR (1/76-12/80) |
| (07-05) - DRIVE TRAIN, CLUTCH CONTROLS AND TRANSMISSION BRAKE, GEAR DRIVE TRACTORS | (966) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/71) |
| (07-04) - DRIVE TRAIN, CLUTCH CONTROLS AND CONNECTIONS | (986) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (07-57) - DRIVE TRAIN, PLANETARY STEERING AXLE, TRACTORS WITH ALL WHEEL DRIVE | (986) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (07-58) - DRIVE TRAIN, PLANETARY STEERING AXLE, TRACTORS WITH ALL WHEEL DRIVE | (986) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (10-22) - HYDRAULIC, POWER STEERING CYLINDER AND CONNECTIONS, MODELS WITH ALL WHEEL DRIVE | (986) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (14-11) - SUSPENSION, NON-ADJUSTABLE FRONT AXLE, 244 AND 254 | (244) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (14-19) - SUSPENSION, FRONT AXLE, FOUR WHEEL DRIVE, 244 AND 254 | (244) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (07-03) - DRIVE TRAIN, CLUTCH PEDAL LINKAGE, CONSTANT MESH GEAR TRANSMISSION, 244 AND 254 | (244) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (07-04) - DRIVE TRAIN, CLUTCH PEDAL LINKAGE, SYNCHROMESH TRANSMISSION, 244 AND 254 | (244) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (07-20) - DRIVE TRAIN, CLUTCH, TRANSMISSION, DIFFERENTIAL AND REAR AXLE HOUSINGS, 234 | (244) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (04-04) - BRAKES, BRAKE CONTROLS, 244 AND 254 | (244) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (162) - REAR FRAME AND DRIVING MECHANISMS, FORWARD AND REVERSE DRIVE | (2504) - INTERNATIONAL TRACTOR (1/62-12/68) |
| (114) - REAR FRAME AND DRIVING MECHANISMS, FORWARD AND REVERSE DRIVE | (2606) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/62-12/67) |
| (235) - CHASSIS, STEERING KNUCKLES, FRONT AXLE & SUPPORTS | (350) - INTERNATIONAL UTILITY TRACTOR (1/56-12/58) |
| (239) - CHASSIS, STEERING KNUCKLES, FRONT AXLE & SUPPORTS, FOR TRACTORS EQUIPPED W/ADJUSTABLE TREAD AXLE | (350) - INTERNATIONAL UTILITY TRACTOR (1/56-12/58) |
| (263) - CHASSIS, REAR AXLE | (350) - INTERNATIONAL UTILITY TRACTOR (1/56-12/58) |
| (162) - REAR FRAME AND DRIVING MECHANISMS, FORWARD AND REVERSE DRIVE | (504) - INTERNATIONAL DIESEL TRACTOR (1/62-12/68) |
| (224) - FOOT BRAKE | (553) - INTERNATIONAL TRACTOR (1/72-12/74) |
| (224) - FOOT BRAKE | (654) - INTERNATIONAL TRACTOR (1/72-12/74) |
| (086) - LUBRICATION SYSTEM, CRANKCASE OIL PAN, OIL PUMP AND OIL PUMP SHAFT SUPPORT, DIESEL ENGINE TRACTORS | (660) - INTERNATIONAL DIESEL TRACTOR (1/59-12/63) |
| (131) - CLUTCH, CLUTCH CONNECTIONS & HAND OPERATED TORQUE AMPLIFIER CONTROLS, INTERNATIONAL 560 & 660 SERIES | (660) - INTERNATIONAL DIESEL TRACTOR (1/59-12/63) |
| (224) - FOOT BRAKE | (724) - INTERNATIONAL DIESEL TRACTOR (1/67-12/74) |
| (224) - FOOT BRAKE | (824) - INTERNATIONAL DIESEL TRACTOR (1/72-12/74) |
| (6-04) - HOUSINGS, CLUTCH, TRANSMISSION, DIFFERENTIAL AND REAR AXLE, MECHANICAL TRANSMISSION | (235) - CASE IH TRACTOR (1/86-12/88) |
| (6-06) - HOUSINGS, CLUTCH, DIFFERENTIAL AND REAR AXLE, HYDROSTATIC TRANSMISSION | (235) - CASE IH TRACTOR (1/86-12/88) |
| (6-14) - INCHING PEDAL | (235) - CASE IH TRACTOR (1/86-12/88) |
| (5-10) - FRONT AXLE, 2 WHEEL DRIVE, NONADJUSTABLE | (245) - CASE IH TRACTOR (1/86-12/90) |
| (5-12) - FRONT AXLE, ADJUSTABLE | (245) - CASE IH TRACTOR (1/86-12/90) |
| (5-14) - FRONT AXLE HOUSING, AXLE SHAFT AND GEARS, MFD TRACTOR | (245) - CASE IH TRACTOR (1/86-12/90) |
| (6-12) - INCHING PEDAL, SYNCHROMESH TRANSMISSION | (245) - CASE IH TRACTOR (1/86-12/90) |
| (5-10) - FRONT AXLE, 2 WHEEL DRIVE, NONADJUSTABLE | (255) - CASE IH TRACTOR (1/86-12/87) |
| (5-12) - FRONT AXLE, ADJUSTABLE | (255) - CASE IH TRACTOR (1/86-12/87) |
| (5-14) - FRONT AXLE HOUSING, AXLE SHAFT AND GEARS, MFD TRACTOR | (255) - CASE IH TRACTOR (1/86-12/87) |
| (6-12) - INCHING PEDAL, SYNCHROMESH TRANSMISSION | (255) - CASE IH TRACTOR (1/86-12/87) |
| (6-10) - INCHING PEDAL, CONSTANT MESH TRANSMISSION | (265) - CASE IH TRACTOR (1/87-12/91) |
| (6-12) - INCHING PEDAL, SYNCHROMESH TRANSMISSION | (265) - CASE IH TRACTOR (1/87-12/91) |
| (7-04) - BRAKE CONTROLS | (265) - CASE IH TRACTOR (1/87-12/91) |
| (5-08) - ADJUSTABLE FRONT AXLE | (275) - CASE IH TRACTOR (1/86-12/88) |
| (6-08) - TRANSMISSION RANGE SHIFT LINKAGE, MFD CONTROLS | (275) - CASE IH TRACTOR (1/86-12/88) |
| (7-04) - BRAKE CONTROLS | (275) - CASE IH TRACTOR (1/86-12/88) |
| (14-01) - SUSPENSION, NON-ADJUSTABLE FRONT AXLE, 234 | (234) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (14-05) - SUSPENSION, FRONT AXLE, FOUR WHEEL DRIVE, 234 | (234) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (07-01) - DRIVE TRAIN, CLUTCH PEDAL LINKAGE, 234 | (234) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (07-03) - DRIVE TRAIN, CLUTCH PEDAL LINKAGE, CONSTANT MESH GEAR TRANSMISSION, 244 AND 254 | (234) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (07-04) - DRIVE TRAIN, CLUTCH PEDAL LINKAGE, SYNCHROMESH TRANSMISSION, 244 AND 254 | (234) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (07-20) - DRIVE TRAIN, CLUTCH, TRANSMISSION, DIFFERENTIAL AND REAR AXLE HOUSINGS, 234 | (234) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (07-55) - DRIVE TRAIN HYDROSTATIC TRANS., 234, CLUTCH HOUSING, TRANS. CASE, TRANS. ASSY AND CONNECTIONS | (234) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (04-03) - BRAKES, BRAKE CONTROLS, 234 | (234) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (14-11) - SUSPENSION, NON-ADJUSTABLE FRONT AXLE, 244 AND 254 | (254) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (14-15) - SUSPENSION, ADJUSTABLE FRONT AXLE, 254 | (254) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (14-19) - SUSPENSION, FRONT AXLE, FOUR WHEEL DRIVE, 244 AND 254 | (254) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (07-03) - DRIVE TRAIN, CLUTCH PEDAL LINKAGE, CONSTANT MESH GEAR TRANSMISSION, 244 AND 254 | (254) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (07-04) - DRIVE TRAIN, CLUTCH PEDAL LINKAGE, SYNCHROMESH TRANSMISSION, 244 AND 254 | (254) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (07-20) - DRIVE TRAIN, CLUTCH, TRANSMISSION, DIFFERENTIAL AND REAR AXLE HOUSINGS, 234 | (254) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (04-04) - BRAKES, BRAKE CONTROLS, 244 AND 254 | (254) - INTERNATIONAL DIESEL TRACTOR (1/82-12/88) |
| (10-07) - HYDRAULICS, TOUCH-CONTROL SYSTEM, ROCKSHAFT AND SUPPORTS | (100) - FARMALL TRACTOR (1/55-12/56) |
| (10-09) - HYDRAULICS, TOUCH CONTROL SYSTEM, ROCKSHAFT AND SUPPORTS | (100) - FARMALL TRACTOR (1/55-12/56) |
| (09-5) - FRAME, FAST-HITCH | (100) - FARMALL TRACTOR (1/55-12/56) |
| (348) - ATTACHMENTS, BEAM COUPLINGS, DRAWBARS, SIDEPLATES & CONNECTIONS, INTERNATIONAL 240 TRACTORS | (200) - FARMALL TRACTOR (1/54-12/56) |
| (229) - HYDRAULIC SYSTEM, TOUCH-CONTROL SYSTEM, FARMALL 200 TRACTORS, ROCKSHAFT AND SUPPORTS, 3 ARM | (200) - FARMALL TRACTOR (1/54-12/56) |
| (231) - HYDRAULIC SYSTEM, TOUCH-CONTROL SYSTEM, FARMALL 200 TRACTORS, ROCKSHAFT AND SUPPORTS, 4 ARM | (200) - FARMALL TRACTOR (1/54-12/56) |
| (348) - ATTACHMENTS, BEAM COUPLINGS, DRAWBARS, SIDEPLATES & CONNECTIONS, INTERNATIONAL 240 TRACTORS | (230) - FARMALL GAS TRACTOR (1/56-12/58) |
| (229) - HYDRAULIC SYSTEM, TOUCH-CONTROL SYSTEM, FARMALL 200 TRACTORS, ROCKSHAFT AND SUPPORTS, 3 ARM | (230) - FARMALL GAS TRACTOR (1/56-12/58) |
| (231) - HYDRAULIC SYSTEM, TOUCH-CONTROL SYSTEM, FARMALL 200 TRACTORS, ROCKSHAFT AND SUPPORTS, 4 ARM | (230) - FARMALL GAS TRACTOR (1/56-12/58) |
| (348) - ATTACHMENTS, BEAM COUPLINGS, DRAWBARS, SIDEPLATES & CONNECTIONS, INTERNATIONAL 240 TRACTORS | (240) - FARMALL TRACTOR (1/58-12/61) |
| (235) - CHASSIS, STEERING KNUCKLES, FRONT AXLE & SUPPORTS | (300) - INTERNATIONAL UTILITY TRACTOR (1/55-12/56) |
| (239) - CHASSIS, STEERING KNUCKLES, FRONT AXLE & SUPPORTS, FOR TRACTORS EQUIPPED W/ADJUSTABLE TREAD AXLE | (300) - INTERNATIONAL UTILITY TRACTOR (1/55-12/56) |
| (263) - CHASSIS, REAR AXLE | (300) - INTERNATIONAL UTILITY TRACTOR (1/55-12/56) |
| (266) - DRAWBARS AND HITCHES, BEAM COUPLINGS, DRAWBAR, SIDE PLATES & CONNECTIONS, INTERNATIONAL 340 SERIES | (330) - INTERNATIONAL UTILITY TRACTOR (1/57-12/58) |
| (059) - LUBRICATION SYSTEM, CRANKCASE OIL PAN, AND LUBRICATING OIL PUMP, DIESEL ENGINE TRACTORS | (330) - INTERNATIONAL UTILITY TRACTOR (1/57-12/58) |
| (301) - MISCELLANEOUS EQUIPMENT, ELECTRALL, TRANSMISSION AND DRIVE SHAFT | (330) - INTERNATIONAL UTILITY TRACTOR (1/57-12/58) |
| (146) - REAR FRAME AND DRIVING MECHANISMS, FORWARD AND REVERSE DRIVE | (330) - INTERNATIONAL UTILITY TRACTOR (1/57-12/58) |
| (182) - REAR AXLE, INTERNATIONAL 330, 340 AND 340 DIESEL | (330) - INTERNATIONAL UTILITY TRACTOR (1/57-12/58) |
| (266) - DRAWBARS AND HITCHES, BEAM COUPLINGS, DRAWBAR, SIDE PLATES & CONNECTIONS, INTERNATIONAL 340 SERIES | (340) - FARMALL DIESEL TRACTOR (1/58-12/63) |
| (059) - LUBRICATION SYSTEM, CRANKCASE OIL PAN, AND LUBRICATING OIL PUMP, DIESEL ENGINE TRACTORS | (340) - FARMALL DIESEL TRACTOR (1/58-12/63) |
| (301) - MISCELLANEOUS EQUIPMENT, ELECTRALL, TRANSMISSION AND DRIVE SHAFT | (340) - FARMALL DIESEL TRACTOR (1/58-12/63) |
| (146) - REAR FRAME AND DRIVING MECHANISMS, FORWARD AND REVERSE DRIVE | (340) - FARMALL DIESEL TRACTOR (1/58-12/63) |
| (266) - DRAWBARS AND HITCHES, BEAM COUPLINGS, DRAWBAR, SIDE PLATES & CONNECTIONS, INTERNATIONAL 340 SERIES | (340) - FARMALL GAS TRACTOR (1/58-12/63) |
| (059) - LUBRICATION SYSTEM, CRANKCASE OIL PAN, AND LUBRICATING OIL PUMP, DIESEL ENGINE TRACTORS | (340) - FARMALL GAS TRACTOR (1/58-12/63) |
| (301) - MISCELLANEOUS EQUIPMENT, ELECTRALL, TRANSMISSION AND DRIVE SHAFT | (340) - FARMALL GAS TRACTOR (1/58-12/63) |
| (146) - REAR FRAME AND DRIVING MECHANISMS, FORWARD AND REVERSE DRIVE | (340) - FARMALL GAS TRACTOR (1/58-12/63) |
| (266) - DRAWBARS AND HITCHES, BEAM COUPLINGS, DRAWBAR, SIDE PLATES & CONNECTIONS, INTERNATIONAL 340 SERIES | (340) - INTERNATIONAL UTILITY DIESEL TRACTOR (1/58-12/63) |
| (059) - LUBRICATION SYSTEM, CRANKCASE OIL PAN, AND LUBRICATING OIL PUMP, DIESEL ENGINE TRACTORS | (340) - INTERNATIONAL UTILITY DIESEL TRACTOR (1/58-12/63) |
| (301) - MISCELLANEOUS EQUIPMENT, ELECTRALL, TRANSMISSION AND DRIVE SHAFT | (340) - INTERNATIONAL UTILITY DIESEL TRACTOR (1/58-12/63) |
| (146) - REAR FRAME AND DRIVING MECHANISMS, FORWARD AND REVERSE DRIVE | (340) - INTERNATIONAL UTILITY DIESEL TRACTOR (1/58-12/63) |
| (182) - REAR AXLE, INTERNATIONAL 330, 340 AND 340 DIESEL | (340) - INTERNATIONAL UTILITY DIESEL TRACTOR (1/58-12/63) |
| (266) - DRAWBARS AND HITCHES, BEAM COUPLINGS, DRAWBAR, SIDE PLATES & CONNECTIONS, INTERNATIONAL 340 SERIES | (340) - INTERNATIONAL UTILITY GAS TRACTOR (1/58-12/63) |
| (059) - LUBRICATION SYSTEM, CRANKCASE OIL PAN, AND LUBRICATING OIL PUMP, DIESEL ENGINE TRACTORS | (340) - INTERNATIONAL UTILITY GAS TRACTOR (1/58-12/63) |
| (301) - MISCELLANEOUS EQUIPMENT, ELECTRALL, TRANSMISSION AND DRIVE SHAFT | (340) - INTERNATIONAL UTILITY GAS TRACTOR (1/58-12/63) |
| (146) - REAR FRAME AND DRIVING MECHANISMS, FORWARD AND REVERSE DRIVE | (340) - INTERNATIONAL UTILITY GAS TRACTOR (1/58-12/63) |
| (182) - REAR AXLE, INTERNATIONAL 330, 340 AND 340 DIESEL | (340) - INTERNATIONAL UTILITY GAS TRACTOR (1/58-12/63) |
| (064) - LUBRICATION SYSTEM, CRANKCASE OIL PAN, OIL PUMP AND OIL PUMP, DIESEL ENGINE TRACTORS | (460) - FARMALL DIESEL TRACTOR (1/58-12/63) |
| (121) - REAR FRAME & DRIVING MECHANISMS, FORWARD & REVERSE DRIVE | (460) - FARMALL DIESEL TRACTOR (1/58-12/63) |
| (064) - LUBRICATION SYSTEM, CRANKCASE OIL PAN, OIL PUMP AND OIL PUMP, DIESEL ENGINE TRACTORS | (460) - FARMALL GAS TRACTOR (1/58-12/63) |
| (121) - REAR FRAME & DRIVING MECHANISMS, FORWARD & REVERSE DRIVE | (460) - FARMALL GAS TRACTOR (1/58-12/63) |
| (086) - LUBRICATION SYSTEM, CRANKCASE OIL PAN, OIL PUMP AND OIL PUMP SHAFT SUPPORT, DIESEL ENGINE TRACTORS | (560) - FARMALL DIESEL TRACTOR (1/58-12/63) |
| (203) - ATTACHMENTS, ELECTRALL, SPECIAL, TRANSMISSION AND DRIVE SHAFT | (FARMALL C) - TRACTOR (1/48-12/51) |
| (158) - HYDRAULIC SYSTEM,TOUCH-CONTROL, 3-ARM, ROCKSHAFT, ROCKSHAFT ARMS, BEARINGS,OPERATING LINK AND BRACE | (FARMALL C) - TRACTOR (1/48-12/51) |
| (161) - HYDRAULIC SYSTEM,TOUCH-CONTROL, 4-ARM, ROCKSHAFT, ROCKSHAFT ARMS,BEARINGS,OPERATING LINK AND BRACE | (FARMALL C) - TRACTOR (1/48-12/51) |
| (10-07) - HYDRAULICS, TOUCH-CONTROL SYSTEM, ROCKSHAFT AND SUPPORTS | (FARMALL CUB) - TRACTOR (1/47-12/53) |
| (09-04) - FRAME, FAST-HITCH, CUB TRACTORS, BAIL, DRAFT LINK, PULL BAR AND SUPPORTS | (FARMALL CUB) - TRACTOR (1/47-12/53) |
| (319) - ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLES WITH ADJUSTABLE WHEELBASE | (FARMALL M) - TRACTOR (1/39-12/52) |
| (319) - ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLES WITH ADJUSTABLE WHEELBASE | (FARMALL MD) - TRACTOR (1/39-12/52) |
| (319) - ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLES WITH ADJUSTABLE WHEELBASE | (FARMALL MDV) - HIGH CLEARANCE TRACTOR (1/45-12/52) |
| (319) - ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLES WITH ADJUSTABLE WHEELBASE | (FARMALL MV) - HIGH CLEARANCE TRACTOR (1/52-12/52) |
| (234) - HYDRAULIC SYSTEM, TOUCH-CONTROL, ROCKSHAFT, ROCKSHAFT ARMS, BEARINGS, OPERATING LINK AND BRACE | (SUPER A) - FARMALL TRACTOR (1/47-12/54) |
| (190) - CHASSIS, HEAVY DUTY ADJUSTMENT FRONT AXLE AND STEERING KNUCKLE | (SUPER A) - FARMALL TRACTOR (1/47-12/54) |
| (234) - HYDRAULIC SYSTEM, TOUCH-CONTROL, ROCKSHAFT, ROCKSHAFT ARMS, BEARINGS, OPERATING LINK AND BRACE | (SUPER A-1) - FARMALL TRACTOR (1/54-12/55) |
| (190) - CHASSIS, HEAVY DUTY ADJUSTMENT FRONT AXLE AND STEERING KNUCKLE | (SUPER A-1) - FARMALL TRACTOR (1/54-12/55) |
| (234) - HYDRAULIC SYSTEM, TOUCH-CONTROL, ROCKSHAFT, ROCKSHAFT ARMS, BEARINGS, OPERATING LINK AND BRACE | (SUPER AV) - FARMALL TRACTOR (1/47-12/53) |
| (190) - CHASSIS, HEAVY DUTY ADJUSTMENT FRONT AXLE AND STEERING KNUCKLE | (SUPER AV) - FARMALL TRACTOR (1/47-12/53) |
| (234) - HYDRAULIC SYSTEM, TOUCH-CONTROL, ROCKSHAFT, ROCKSHAFT ARMS, BEARINGS, OPERATING LINK AND BRACE | (SUPER AV-1) - FARMALL TRACTOR (1/54-12/55) |
| (190) - CHASSIS, HEAVY DUTY ADJUSTMENT FRONT AXLE AND STEERING KNUCKLE | (SUPER AV-1) - FARMALL TRACTOR (1/54-12/55) |
| (149) - HYDRAULIC SYSTEM, TOUCH-CONTROL ROCKSHAFT, 3-ARM ROCKSHAFT ARMS, BEARINGS, OPERATING LINK & BRACE | (SUPER C) - FARMALL TRACTOR (1/51-12/53) |
| (151) - HYDRAULIC SYSTEM, TOUCH-CONTROL ROCKSHAFT, 4-ARM ROCKSHAFT ARMS, BEARINGS, OPERATING LINK & BRACE | (SUPER C) - FARMALL TRACTOR (1/51-12/53) |
| (416) - ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLES WITH ADJUSTABLE WHEELBASE, SPECIAL, SUPER "M" & "MD" | (SUPER M) - FARMALL TRACTOR (1/52-12/54) |
| (416) - ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLES WITH ADJUSTABLE WHEELBASE, SPECIAL, SUPER "M" & "MD" | (SUPER M-TA) - FARMALL TRACTOR (1/54-12/54) |
| (216) - ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLES WITH ADJUSTABLE WHEELBASE, SPECIAL, SUPER "H" | (SUPER-H) - FARMALL TRACTOR (1/53-12/53) |
| (216) - ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLES WITH ADJUSTABLE WHEELBASE, SPECIAL, SUPER "H" | (SUPER-HV) - FARMALL TRACTOR (1/53-12/53) |
