| Узел | Модель |
|---|
| (G-10) - AUTOMATIC WING TRANSPORT LOCK, WING TYPE, MACHINES BUILT AFTER NOVEMBER 1984 | (5500) - INTERNATIONAL HARVESTER CHISEL PLOW (1/79-12/87) |
| (E-4) - 645 VIBRA CHISEL, DIRECT MOUNTED, THREE POINT HITCH | (645) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/77-12/79) |
| (B-07) - SPROCKETS, GEARS AND SHAFTS FOR PLANTING | (82-SERIES) - INTERNATIONAL HARVESTER LISTER (1/70-12/86) |
| (07) - SAFETY CHAIN | (300) - INTERNATIONAL HARVESTER DISKALL PLOW (1/54-12/81) |
| (75.200.04) - FRONT DISK GANG - 5 SHANK ASSEMBLY (QUANTITIES FOR ONE GANG ASSEMBLY) 2007 MODELS & AFTER | (690) - CONSER-TILL (6/06-) |
| (75.200.06) - FRONT DISK GANG - 7 SHANK ASSEMBLY (QUANTITIES FOR ONE GANG ASSEMBLY) 2007 MODELS & AFTER | (690) - CONSER-TILL (6/06-) |
| (75.200.08) - REAR DISK GANG - 5 SHANK ASSEMBLY (QUANTITIES FOR ONE GANG ASSEMBLY) 2007 MODELS & AFTER | (690) - CONSER-TILL (6/06-) |
| (75.200.10) - R DISK GANG (7 SHANK NON-FOLD ASSY) (QUANTITIES FOR ONE GANG ASSEMBLY) 2007 MODELS & AFTER | (690) - CONSER-TILL (6/06-) |
| (75.200.12) - R DISK GANG (7 SHANK FOLDING ASSY) (QUANTITIES FOR ONE GANG ASSEMBLY) 2007 MODELS & AFTER | (690) - CONSER-TILL (6/06-) |
| (75.200.14) - W DISK GANG (7 SHANK REAR WING ASSY) (QUANTITIES FOR ONE GANG ASSY) 2007 MODELS & AFTER | (690) - CONSER-TILL (6/06-) |
| (9-06) - FRAME AND HITCH, CATEGORY II | (420) - CASE IH MOLDBOARD PLOW (1/75-12/93) |
| (9-10) - FRAME AND HITCH, CATEGORY II, WIDE TREAD | (420) - CASE IH MOLDBOARD PLOW (1/75-12/93) |
| (AT-2) - FRAME AND HITCH | (440) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/74-12/80) |
| (9-06) - MAIN FRAME EXTENSION, 1967 THROUGH 1972 | (450) - CASE IH MOLDBOARD PLOW (1/84-12/93) |
| (AS-04) - STEERING LINKAGE | (510) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/72-12/83) |
| (X-14) - MULCHER ATTACHMENT, 2 AND 3 FURROW | (512) - INTERNATIONAL HARVESTER 5-FURROW MOLDBOARD PLOW (1/59-12/65) |
| (AG-02) - MAIN FRAME, FOR USE WITH SPRING TRIP OR SHEAR PIN TRIP | (700) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/65-12/70) |
| (AG-04) - MAIN FRAME, FOR USE WITH AUTOMATIC TRIP | (700) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/65-12/70) |
| (AG-22) - LAND HITCH | (700) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/65-12/70) |
| (AK-03) - MAIN FRAME | (700) - INTERNATIONAL HARVESTER TRAILING MOLDBOARD PLOW (1/68-12/75) |
| (AK-31) - PULL BEAM & SPREADER, UNITS C, D, G, H, K, M, N & P, HYDRAULIC EQUIPMENT | (700) - INTERNATIONAL HARVESTER TRAILING MOLDBOARD PLOW (1/68-12/75) |
| (AP-05) - MAIN FRAME, 4 TO 5, 5 TO 6 & 6 FURROW NON-EXTENDABLE IN THE FURROW PLOWS W/REAR FURROW & GAUGE WHEEL | (710) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/70-12/76) |
| (AP-15[A]) - COLTER ATTACHING PARTS FORGED END COLTER RAIL, ONE PER COLTER | (710) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/70-12/76) |
| (AP-20) - REAR FURROW WHEEL, FOR 4 THRU 8 FURROW PLOWS EQUIPPED W/GAUGE WHEEL | (710) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/70-12/76) |
| (9-02) - MAIN FRAME, BUILT AFTER 1980 | (730) - CASE IH MOLDBOARD PLOW (1/88-12/91) |
| (9-02) - MAIN FRAME | (735) - CASE IH MOLDBOARD PLOW (1/90-12/91) |
| (9-10) - REAR FURROW WHEEL | (735) - CASE IH MOLDBOARD PLOW (1/90-12/91) |
| (9-02) - MAIN FRAME | (770) - CASE IH MOLDBOARD PLOW (1/91-12/92) |
| (9-04) - MAIN FRAME, CONTINUED | (770) - CASE IH MOLDBOARD PLOW (1/91-12/92) |
| (9-34) - TANDEM HITCH ATTACHMENT | (770) - CASE IH MOLDBOARD PLOW (1/91-12/92) |
| (75.200.04) - FRONT DISK GANG - 5 SHANK ASSEMBLY (QUANTITIES FOR ONE GANG ASSEMBLY) 2007 MODELS & AFTER | (MRX690) - CASE IH MULCH-TILL RIPPER (9/01-12/08) |
| (75.200.06) - FRONT DISK GANG - 7 SHANK ASSEMBLY (QUANTITIES FOR ONE GANG ASSEMBLY) 2007 MODELS & AFTER | (MRX690) - CASE IH MULCH-TILL RIPPER (9/01-12/08) |
| (75.200.08) - REAR DISK GANG - 5 SHANK ASSEMBLY (QUANTITIES FOR ONE GANG ASSEMBLY) 2007 MODELS & AFTER | (MRX690) - CASE IH MULCH-TILL RIPPER (9/01-12/08) |
| (75.200.10) - R DISK GANG (7 SHANK NON-FOLD ASSY) (QUANTITIES FOR ONE GANG ASSEMBLY) 2007 MODELS & AFTER | (MRX690) - CASE IH MULCH-TILL RIPPER (9/01-12/08) |
| (75.200.12) - R DISK GANG (7 SHANK FOLDING ASSY) (QUANTITIES FOR ONE GANG ASSEMBLY) 2007 MODELS & AFTER | (MRX690) - CASE IH MULCH-TILL RIPPER (9/01-12/08) |
| (75.200.14) - W DISK GANG (7 SHANK REAR WING ASSY) (QUANTITIES FOR ONE GANG ASSY) 2007 MODELS & AFTER | (MRX690) - CASE IH MULCH-TILL RIPPER (9/01-12/08) |
| (3-12) - FRAME AND BRACKETS, CASE TRACTORS 1270 AND 1370 | (2350) - CASE IH FRONT END LOADER (1/86-12/86) |
| (3-40) - TRACTOR VALVE TO EXTERNAL VALVE SYSTEM, USING THREE SPOOL VALVE | (2350) - CASE IH FRONT END LOADER (1/86-12/86) |
| (3-42) - TRACTOR VALVE TO EXTERNAL VALVE SYSTEM, USING ONE THREE SPOOL VALVE WITH ONE SINGLE SPOOL VALVE | (2350) - CASE IH FRONT END LOADER (1/86-12/86) |
| (4-28) - TRACTOR VALVE TO EXTERNAL VALVE SYSTEM, USING THREE SPOOL VALVE | (2450) - CASE IH FRONT END LOADER (1/86-12/97) |
| (4-30) - TRACTOR VALVE TO EXTERNAL VALVE SYSTEM, USING ONE THREE SPOOL VALVE WITH ONE SINGLE SPOOL VALVE | (2450) - CASE IH FRONT END LOADER (1/86-12/97) |
| (L-07) - HITCH | (275) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/65-12/73) |
| (05) - SUBFRAME, 715651016 - DX21 & DX24 | (716524016) - BHX172 BACKHOE (8/03-12/07) |
| (05) - SUBFRAME, 715651016 - DX21 & DX24 | (BHX172) - BACKHOE (8/03-12/07) |
| (13.705) - ROTOR CUTTER | (RB454) - CASE IH ROUND BALER (7/07-1/14) |
| (13.705) - ROTOR CUTTER | (RB464) - CASE IH ROUND BALER (7/07-1/14) |
| (13.705[1]) - ROTOR CUTTER, PRIOR TO P.I.N. HBJ039376 | (RBX452) - CASE IH ROUND BALER (11/02-7/05) |
| (13.705[2]) - ROTOR CUTTER, P.I.N. HBJ039377 & AFTER | (RBX452) - CASE IH ROUND BALER (11/02-7/05) |
| (13.705) - ROTOR CUTTER | (RBX453) - CASE IH ROUND BALER (9/05-12/06) |
| (13.705[1]) - ROTOR CUTTER, PRIOR TO P.I.N. HBJ039376 | (RBX462) - CASE IH ROUND BALER (1/03-7/05) |
| (13.705[2]) - ROTOR CUTTER, P.I.N. HBJ039377 & AFTER | (RBX462) - CASE IH ROUND BALER (1/03-7/05) |
| (13.705) - ROTOR CUTTER | (RBX463) - CASE IH ROUND BALER (9/05-12/06) |
| (9-068) - REAR CORNER BUMPER BRACKET, MACHINES BUILT 1985 AND AFTER, WITH HITCH P.I.N. 501 AND AFTER | (7100) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-060) - REAR CORNER BUMPER BRACKET, MACHINES BUILT 1985 AND AFTER | (7200) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-124) - FURROW OPENER DRAWBAR MOUNTING BRACKETS | (7200) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-002) - CART FRAME | (8500) - CASE IH AIR DRILL (8/86-12/89) |
| (9A-12) - HITCH BRACE, MODELS WITHOUT FERTILIZER ATTACHMENT, 8 ROW WIDE AND 12 ROW NARROW, VERTICAL FOLD | (950) - CASE IH TRAILING PLANTER (7/89-12/95) |
| (9F-08) - LIQUID FERTILIZER SQUEEZE PUMP SYSTEM, 12 AND 16 ROW NARROW, FRONT FOLD | (950) - CASE IH TRAILING PLANTER (7/89-12/95) |
| (9A-014) - HITCH BRACE, MODELS WITHOUT FERTILIZER ATTACHMENT, 8 ROW WIDE & 12 ROW NARROW VERTICAL FOLD | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (9F-008) - LIQUID FERTILIZER SQUEEZE PUMP SYSTEM, 12 AND 16 ROW NARROW | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (75.200.04) - SHEAR BOLT SHANK | (1300) - DMI ECOLO-CHAMP COLTER CHISEL (1/85-12/92) |
| (9-22) - RIGID SHANK UNIT, 14 SUBSOIL CHISEL | (14) - CASE IH SUBSOIL CHISEL (11/89-12/94) |
| (75.200.04) - CUSHION DISC MOUNT ASSEMBLY | (530B) - DMI ECOLO-TIGER (1/97-12/07) |
| (75.200.03) - CUSHION DISC MOUNT ASSEMBLY | (530B) - ECOLO-TIGER MULCH CHISEL (1/97-12/05) |
| (9-122) - AUTOMATIC WING TRANSPORT LOCK, NON LEVEL LIFT MODELS, SINGLE & DOUBLE FOLD, 33 THROUGH 45 FOOT WIDE | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-126) - AUTOMATIC WING TRANSPORT LOCK, LEVEL LIFT MODELS, VERTICAL & DOUBLE FOLD,35 THROUGH 53 FOOT WIDE | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-122) - AUTOMATIC WING TRANSPORT LOCK, NON LEVEL LIFT MODELS, SINGLE & DOUBLE FOLD, 33 THROUGH 45 FOOT WIDE | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-126) - AUTOMATIC WING TRANSPORT LOCK, LEVEL LIFT MODELS, VERTICAL & DOUBLE FOLD,35 THROUGH 53 FOOT WIDE | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (75.200.03) - SHEAR BOLT SHANK | (6700) - CHISEL PLOW (1/00-12/06) |
| (007) - SHEAR BOLT SHANK - MODEL 6700 SHANKS | (6700) - COULTER CHISEL (1/00-12/06) |
| (75.200.03) - SHEAR BOLT SHANK | (6750) - CHISEL PLOW (1/00-12/06) |
| (007) - SHEAR BOLT SHANK - MODEL 6700 SHANKS | (6750) - PARABOLIC CHISEL (1/00-12/06) |
| (75.200.04) - CUSHION DISC MOUNT ASSEMBLY | (730B) - DMI ECOLO-TIGER (1/97-12/07) |
| (75.200.03) - CUSHION DISC MOUNT ASSEMBLY | (730B) - ECOLO-TIGER MULCH CHISEL (1/02-12/05) |
| (75.200.04) - SHEAR BOLT SHANK | (900) - DMI ECOLO-CHAMP COLTER CHISEL (1/85-12/92) |
| (75.200.03) - SHEAR BOLT SHANK | (COULTER) - CHAMP II - DMI (1/82-12/90) |
| (75.200.01) - AUTOMATIC RESET SHANK ASSEMBLY | (TURBO-CHAMP) - - DMI (1/80-12/82) |
| (44.100.01) - STABILIZER WHEEL 7 SHANK ONLY | (TURBO-TIGER) - II - DMI (1/79-12/90) |
| (9-058) - WING LIFT UNIT, WING TYPE MODELS, 22 FOOT 6 INCH BASIC SIZE | (4500) - CASE IH VIBRA SHANK CULTIVATOR (1/91-12/98) |
| (9-060) - WING LIFT UNIT, WING TYPE MODELS, 31 FOOT 6 INCH BASIC SIZE | (4500) - CASE IH VIBRA SHANK CULTIVATOR (1/91-12/98) |
| (9-036) - SAFETY CHAIN | (310) - CASE IH DISKALL (1/85-12/90) |
| (9-04) - MAIN FRAME, 13 FOOT 9 INCH WITH 11 SHANKS, 16 FOOT 3 INCH WITH 13 SHANKS | (6650) - CASE IH CONSER-TILL PLOW (10/87-12/97) |
| (9-26) - DISC GROUP AND ROCKSHAFT, PRIOR TO P.I.N. CCG0003914 | (6650) - CASE IH CONSER-TILL PLOW (10/87-12/97) |
| (9-32) - DISC GROUP AND ROCKSHAFT, P.I.N. CCG0003914 AND AFTER | (6650) - CASE IH CONSER-TILL PLOW (10/87-12/97) |
| (9-01) - MAIN FRAME | (700) - CASE IH HI-CLEARANCE TRAILING MOLDBOARD PLOW (1/67-12/00) |
| (9-02) - PULL FRAME AND SPREADER | (700) - CASE IH HI-CLEARANCE TRAILING MOLDBOARD PLOW (1/67-12/00) |
| (9-03) - MAIN FRAME EXTENSION | (700) - CASE IH HI-CLEARANCE TRAILING MOLDBOARD PLOW (1/67-12/00) |
| (9-04) - MAIN FRAME, FOUR FURROW, CONTINUED | (720) - CASE IH MOLDBOARD PLOW (1/78-12/91) |
| (9-08) - MAIN FRAME, FIVE, SIX AND SEVEN FURROW, IN THE FURROW, CONTINUED | (720) - CASE IH MOLDBOARD PLOW (1/78-12/91) |
| (9-40) - COLTER ATTACHING PARTS | (720) - CASE IH MOLDBOARD PLOW (1/78-12/91) |
| (9-52) - REAR FURROW WHEEL, CONTINUED | (720) - CASE IH MOLDBOARD PLOW (1/78-12/91) |
| (9-20) - COLTER ATTACHING PARTS | (800) - CASE IH MOLDBOARD PLOW (1/96-12/00) |
| (9-14) - CUSHION DISK GANG, TRUNNION MOUNTED BEARING | (6800) - CASE IH COMBO-MULCH RIPPER (10/94-12/02) |
| (09-08) - SHEAR BOLT SHANK UNIT | (6814) - CASE IH RIPPER (1/94-12/97) |
| (75.200.04) - CUSHION DISC MOUNT ASSEMBLY | (9300) - DMI ECOLO-TIGER DISK RIPPER (1/98-12/06) |
| (75.200.04) - CUSHION DISC MOUNT 2006 MODEL YEAR | (9300) - ECOLO-TIGER DISK RIPPER (7/04-12/09) |
| (75.200.05) - CUSHION DISC MOUNT ASSEMBLY | (9300) - ECOLO-TIGER DISK RIPPER (7/04-12/09) |
| (9-22) - CUSHION DISK GANG, TRUNNION MOUNTED BEARING, P.I.N. JAG0183120 AND AFTER | (3900) - CASE IH FLEX WING TANDEM DISK HARROW (1/91-12/97) |
| (9-13) - CUSHION DISK GANG, 7-1/2 INCH SPACING | (3950) - CASE IH FLEX WING TANDEM DISK HARROW (1/96-12/00) |
| (9-14) - CUSHION DISK GANG, 9 INCH SPACING | (3950) - CASE IH FLEX WING TANDEM DISK HARROW (1/96-12/00) |
| (9-42) - AUTOMATIC WING TRANSPORT LOCK, 31 FOOT (9.4 M) THROUGH 52 | (4900) - CASE IH VIBRA TILLER (9/87-12/95) |
| (09-04) - 1044 HEADER DRIVE SHAFT | (1640) - COMBINE FIELD TRACKER (1/86-12/89) |
| (09-05) - 1064, 1084 HEADER DRIVE SHAFT | (1640) - COMBINE FIELD TRACKER (1/86-12/89) |
| (09-06) - 1063 HEADER DRIVE SHAFTS | (1640) - COMBINE FIELD TRACKER (1/86-12/89) |
| (09-07) - 1083 HEADER DRIVE SHAFTS | (1640) - COMBINE FIELD TRACKER (1/86-12/89) |
| (09-04) - 1044 HEADER DRIVE SHAFT | (1660) - COMBINE FIELD TRACKER (1/86-12/90) |
| (09-05) - 1064, 1084 HEADER DRIVE SHAFT | (1660) - COMBINE FIELD TRACKER (1/86-12/90) |
| (09-06) - 1063 HEADER DRIVE SHAFTS | (1660) - COMBINE FIELD TRACKER (1/86-12/90) |
| (09-07) - 1083 HEADER DRIVE SHAFTS | (1660) - COMBINE FIELD TRACKER (1/86-12/90) |
| (09-04) - 1044 HEADER DRIVE SHAFT | (1680) - COMBINE FIELD TRACKER (1/86-12/93) |
| (09-05) - 1064, 1084 HEADER DRIVE SHAFT | (1680) - COMBINE FIELD TRACKER (1/86-12/93) |
| (09-06) - 1063 HEADER DRIVE SHAFTS | (1680) - COMBINE FIELD TRACKER (1/86-12/93) |
| (09-07) - 1083 HEADER DRIVE SHAFTS | (1680) - COMBINE FIELD TRACKER (1/86-12/93) |
| (33-15) - FEEDER, KNIFE, FOR 17.5 FOOT HEADER | (1482) - INTERNATIONAL HARVESTER PULL BEHIND COMBINE (1/80-12/86) |
| (33-09) - FEEDER AND HEADER, KNIFE | (914) - INTERNATIONAL PULL-TYPE COMBINE (S/N 8001 & AFTER) (1/75-12/79) |
| (9B-22) - BOLL BOX, DRIVE | (1800) - CASE IH COTTON HARVESTER (1/90-12/96) |
| (6-06) - FAN DRIVE HOISING PULLEY AND HYDROSTATIC PUMP DRIVE PLATE | (1822) - CASE IH COTTON PICKER (S/N JJC0012691 & AFTER) (7/89-12/93) |
| (6-06) - FAN DRIVE HOISING PULLEY AND HYDROSTATIC PUMP DRIVE PLATE | (1844) - CASE IH COTTON PICKER (S/N JJC0002462 & AFTER) (7/89-12/93) |
| (09-47) - 1044 HEADER DRIVE SHAFT | (1044) - CORN HEAD (1/92-12/01) |
| (09-49) - 1063 HEADER DRIVE SHAFTS | (1063) - CORN HEAD (1/96-12/01) |
| (09-48) - 1064, 1084 HEADER DRIVE SHAFT | (1064) - CORN HEAD (1/87-12/01) |
| (09-50) - 1083 HEADER DRIVE SHAFTS | (1083) - CORN HEAD (1/88-12/01) |
| (09-48) - 1064, 1084 HEADER DRIVE SHAFT | (1084) - CORN HEAD (1/88-12/01) |
| (09-34A) - UPPER CROSS AUGER OPTION ASN CCC0011569 | (1052) - DRAPER HEADER (1/99-3/03) |
| (09-28) - UPPER CROSS AUGER OPTION | (2052) - DRAPER HEADER (4/03-9/06) |
| (09-03) - WING FLEX LINKAGE | (2062) - DRAPER HEADER (4/03-9/06) |
| (09-21) - UPPER CROSS AUGER OPTION | (2062) - DRAPER HEADER (4/03-9/06) |
| (9-102) - AUGER AND KNIFE JACKSHAFT DRIVE, 15.0 FOOT HEADER | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-103A) - AUGER JACKSHAFT DRIVE, MOUNTED ON RIGHT-HAND SIDE OF HEADER, 15.0 FOOT HEADER | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-104) - AUGER AND KNIFE JACKSHAFT DRIVE, 17.5 AND 20.0 FOOT HEADER | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-105A) - AUGER JACKSHAFT DRIVE, MOUNTED ON RIGHT-HAND SIDE OF HEADER, 17.5 AND 20.0 FOOT HEADER | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-106) - AUGER AND KNIFE JACKSHAFT DRIVE, 22.5 AND 25.0 FOOT HEADER | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-107A) - AUGER JACKSHAFT DRIVE, MOUNTED ON RIGHT-HAND SIDE OF HEADER, 22.5 AND 25.0 FOOT HEADER | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-108) - AUGER AND KNIFE JACKSHAFT DRIVE, 30.0 FOOT HEADER, SPECIAL | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-109A) - AUGER JACKSHAFT DRIVE, MOUNTED ON RIGHT-HAND SIDE OF HEADER, 30.0 FOOT HEADER | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9C-14) - AUGER AND KNIFE JACKSHAFT DRIVE, 15 AND 16-1/2 FOOT HEADER | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9C-15A) - AUGER JACKSHAFT DRIVE, (MOUNTED ON RIGHT-HAND SIDE OF HEADER, 15 AND 16-1/2 FT HEADER | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9C-16) - AUGER AND KNIFE JACKSHAFT DRIVE, 17-1/2 AND 20 FOOT HEADER | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9C-17A) - AUGER JACKSHAFT DRIVE, (MOUNTED ON RIGHT-HAND SIDE OF HEADER) 17.5 AND 20.0 FT HEADER | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9C-18) - AUGER AND KNIFE JACKSHAFT DRIVE, 22-1/2 AND 25 FOOT HEADER | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9C-19A) - AUGER JACKSHAFT DRIVE, (MOUNTED ON RIGHT-HAND SIDE OF HEADER) 22 1/2 AND 25 FOOT HEADER | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9C-20) - AUGER AND KNIFE JACKSHAFT DRIVE, 30 FOOT HEADER | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9C-21A) - AUGER JACKSHAFT DRIVE, (MOUNTED ON RIGHT-HAND SIDE OF HEADER) 30 FOOT HEADER | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (C-21) - GRAIN HEADER, HART CARTER FLOATING CUTTER BAR, CUTTING PARTS, S/N 19000 & BELOW | (810) - GRAIN HEADER (S/N 501 & AFTER) (1/71-12/88) |
| (14.01) - HEADER DRIVE, LEFT SIDE | (DCX131) - PIVOT TONGUE DISC MOWER CONDITIONER (8/01-10/08) |
| (14.03) - HEADER DRIVE, CENTER | (DCX131) - PIVOT TONGUE DISC MOWER CONDITIONER (8/01-10/08) |
| (14.03) - HEADER DRIVE, CENTER | (DCX131F) - PIVOT TONGUE DISC MOWER CONDITIONER (9/07-10/08) |
| (12.05[1]) - TONGUE, STEERING PIPE | (DCX161) - PIVOT TONGUE DISC MOWER CONDITIONER (9/01-4/08) |
| (12.07) - HEADER TILT, HYDRAULIC | (SCX100) - PIVOT TONGUE SICKLE MOWER CONDITIONER (9/01-9/08) |
| (15.01) - CONDITIONER ROLLS & TENSION | (SMX91) - SICKLE MOWER CONDITIONER (9/01-1/07) |
| (040[03]) - HYDRAULIC CYLINDER, TILT, 86633954 | (WDX1101) - CASE IH SELF PROPELLED WINDROWER TRACTOR (10/01-11/04) |
| (040[03]) - HYDRAULIC CYLINDER, TILT, 86633954 | (WDX1701) - CASE IH SELF PROPELLED WINDROWER TRACTOR (11/01-11/04) |
| (040[03]) - HYDRAULIC CYLINDER, TILT, 86633954 | (WDX901) - CASE IH SELF PROPELLED WINDROWER TRACTOR (12/01-11/04) |
| (E-053) - HYDRAULICS, PLATFORM LIFT CYLINDER UNIT | (201) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/61-12/66) |
| (A-07) - CHASSIS, RADIATOR AND SHEET METAL, PLATFORM LIFT AND FLOAT | (210) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/69-12/74) |
| (F-02) - HYDRAULICS SYSTEM, CHASSIS, PRIOR TO SERIAL NUMBER 3700 | (210) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/69-12/74) |
| (6-02) - PROPULSION SPEED CONTROL | (4000) - CASE IH SELF-PROPELLED WINDROWER (S/N 4501 & AFTER) (1/80-12/86) |
| (09-03) - FRAME, HEADER FLOATATION AND ARM, FOR SINGLE AUGER AND DRAPER HEADERS PRIOR TO 1978 | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (09-12) - FRAME, HEADER CENTER LINK | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (6-02) - PROPULSION SPEED CONTROL | (5000) - CASE IH SELF-PROPELLED WINDROWER (S/N 1901 & AFTER) (1/80-12/86) |
| (09-03) - FRAME, HEADER FLOATATION AND ARM, FOR SINGLE AUGER AND DRAPER HEADERS PRIOR TO 1978 | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (09-12) - FRAME, HEADER CENTER LINK | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (09-03) - FRAME, HEADER FLOATATION AND ARM, FOR SINGLE AUGER AND DRAPER HEADERS PRIOR TO 1978 | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (09-12) - FRAME, HEADER CENTER LINK | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (5.08[1]) - REEL ARMS, STANDARD, 18 FT TO 36FT, PRIOR TO PIN D28 2002 | (DHX181) - CASE IH DRAPER HEADER (3/02-3/05) |
| (5.08[2]) - REEL ARMS, STANDARD, 18 TO 36 FT, FROM PIN D28 2002 | (DHX181) - CASE IH DRAPER HEADER (3/02-3/05) |
| (5.08[1]) - REEL ARMS, STANDARD, 18 FT TO 36FT, PRIOR TO PIN D28 2002 | (DHX211) - CASE IH DRAPER HEADER (3/02-3/05) |
| (5.08[2]) - REEL ARMS, STANDARD, 18 TO 36 FT, FROM PIN D28 2002 | (DHX211) - CASE IH DRAPER HEADER (3/02-3/05) |
| (5.08[1]) - REEL ARMS, STANDARD, 18 FT TO 36FT, PRIOR TO PIN D28 2002 | (DHX251) - CASE IH DRAPER HEADER (3/02-3/05) |
| (5.08[2]) - REEL ARMS, STANDARD, 18 TO 36 FT, FROM PIN D28 2002 | (DHX251) - CASE IH DRAPER HEADER (3/02-3/05) |
| (5.08[1]) - REEL ARMS, STANDARD, 18 FT TO 36FT, PRIOR TO PIN D28 2002 | (DHX301) - CASE IH DRAPER HEADER (3/02-3/05) |
| (5.08[2]) - REEL ARMS, STANDARD, 18 TO 36 FT, FROM PIN D28 2002 | (DHX301) - CASE IH DRAPER HEADER (3/02-3/05) |
| (5.08[1]) - REEL ARMS, STANDARD, 18 FT TO 36FT, PRIOR TO PIN D28 2002 | (DHX361) - CASE IH DRAPER HEADER (3/02-3/05) |
| (5.08[2]) - REEL ARMS, STANDARD, 18 TO 36 FT, FROM PIN D28 2002 | (DHX361) - CASE IH DRAPER HEADER (3/02-3/05) |
| (B-48) - DRAPER HEADER, HEADER CENTER LINK, WRENCH | (DRAPER) - HEADER FOR WINDROWERS (1/76-12/90) |
| (9-14) - WEIGHT FRAME, THREE POINT HITCH | (10QA) - CASE IH LOADER (4/87-12/88) |
| (9-14) - WEIGHT FRAME, THREE POINT HITCH | (5QA) - CASE IH LOADER (5/88-12/88) |
| (9-14) - WEIGHT FRAME, THREE POINT HITCH | (7QA) - CASE IH LOADER (1/86-12/88) |
| (9-88) - SAFETY CHAIN | (575) - CASE IH MANURE SPREADER (1/90-12/91) |
| (9-88) - SAFETY CHAIN | (595) - CASE IH MANURE SPREADER (1/90-12/91) |
| (13-01) - SUPERSTRUCTURE, SUPERSTRUCTURE, LOADER, DIESEL LOADER, GAS | (4150) - INTERNATIONAL HARVESTER COMPACT LOADER (1/77-12/80) |
| (9-40) - BACKHOE FRAME AND SWING TOWER, D100 OR D100XR BACKHOE | (1838) - CASE UNI-LOADER SKID STEER LOADER (1/94-12/96) |
| (09-55) - BACKHOE FRAME - SWING TOWER (D100 OR D100XR) | (1840) - CASE UNI-LOADER SKID STEER LOADER (1/89-12/01) |
| (09-69) - BACKHOE FRAME - SWING TOWER, D100, D100XR (NORTH AMERICA), WITH KONTAK OR DUKE VALVES | (1845C) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/85-12/01) |
| (09-41) - BACKHOE FRAME - SWING TOWER (D100) | (40XT) - CASE SKID STEER LOADER (1/01-12/05) |
| (09-41) - BACKHOE FRAME - SWING TOWER (D100) | (60XT) - CASE SKID STEER LOADER (1/02-12/05) |
| (09-41) - BACKHOE FRAME - SWING TOWER (D100) | (70XT) - CASE SKID STEER LOADER (5/02-12/05) |
