| Узел | Модель |
|---|
| (E09) - ENGINE MOUNTING | (1124) - CONCORD AIR SYSTEM (5/99-12/00) |
| (A-36) - FOUR DRILL HEAVY DUTY HITCH | (620) - INTERNATIONAL HARVESTER GRAIN DRILL (1/80-12/88) |
| (C-02) - ENDWISE TRANSPORT, FRAME AND HITCH, LEADING MACHINE | (620) - INTERNATIONAL HARVESTER GRAIN DRILL (1/80-12/88) |
| (B31) - REAR HITCH, TWO SECTION, DISCONTINUED | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B36) - REAR HITCH | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B33) - REAR HITCH, 2 SECTION, DISCONTINUED | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B38) - REAR HITCH, 12" ATD'S | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (C-14) - 645 VIBRA CHISEL, 31-1/2 FOOT WING, HITCH JACK | (645) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/77-12/79) |
| (C-15) - 645 VIBRA CHISEL, 31-1/2 FOOT WING, ROCKSHAFT CYLINDER SUPPORT | (645) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/77-12/79) |
| (07-17) - SLIDE ADJUSTING GAUGE WHEEL MOUNTING | (55) - MCCORMICK-INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (04-01) - WARNING & TAIL LAMP ASSEMBLY - LAYOUT - 18 FOOT 5 INCH THROUGH 22 FOOT 6 INCH | (4400) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-05) - 6 FOOT WING - 26 FOOT 3 INCH MACHINE LAYOUT | (4400) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-13) - HINGE ASSEMBLY - FLAT-FOLD - RIGID - 18 FOOT MACHINE | (4400) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-14) - HINGE ASSEMBLY - FLAT-FOLD FLOATING - 22 FOOT 11 INCH MACHINE | (4400) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (04-01) - WARNING & TAIL LAMP ASSEMBLY - LAYOUT - 18 FOOT 5 INCH THROUGH 22 FOOT 6 INCH | (4450) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-05) - 6 FOOT WING - 26 FOOT 3 INCH MACHINE LAYOUT | (4450) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-13) - HINGE ASSEMBLY - FLAT-FOLD - RIGID - 18 FOOT MACHINE | (4450) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-14) - HINGE ASSEMBLY - FLAT-FOLD FLOATING - 22 FOOT 11 INCH MACHINE | (4450) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (9-08) - FRAME AND HITCH, CATEGORY II, CONTINUED | (420) - CASE IH MOLDBOARD PLOW (1/75-12/93) |
| (15) - STARTER, NUMBER 26133 MODEL M45G (PLATE CLUTCH DRIVE) | (BUTLERS) - EQUIPMENT FOR DAVID BROWN TRACTORS (1/65-12/72) |
| (16) - STARTER, NOS. 26215-26278-26301 MODEL M45G (ROLLER CLUTCH DRIVE) 26215, 26278, 26301 | (BUTLERS) - EQUIPMENT FOR DAVID BROWN TRACTORS (1/65-12/72) |
| (15) - STARTER, NUMBER 26133 MODEL M45G (PLATE CLUTCH DRIVE) | (CAV) - EQUIPMENT FOR DAVID BROWN TRACTORS (1/65-12/72) |
| (16) - STARTER, NOS. 26215-26278-26301 MODEL M45G (ROLLER CLUTCH DRIVE) 26215, 26278, 26301 | (CAV) - EQUIPMENT FOR DAVID BROWN TRACTORS (1/65-12/72) |
| (15) - STARTER, NUMBER 26133 MODEL M45G (PLATE CLUTCH DRIVE) | (LUCAS) - EQUIPMENT FOR DAVID BROWN TRACTORS (1/65-12/72) |
| (16) - STARTER, NOS. 26215-26278-26301 MODEL M45G (ROLLER CLUTCH DRIVE) 26215, 26278, 26301 | (LUCAS) - EQUIPMENT FOR DAVID BROWN TRACTORS (1/65-12/72) |
| (15) - STARTER, NUMBER 26133 MODEL M45G (PLATE CLUTCH DRIVE) | (SIMMS) - EQUIPMENT FOR DAVID BROWN TRACTORS (1/65-12/72) |
| (16) - STARTER, NOS. 26215-26278-26301 MODEL M45G (ROLLER CLUTCH DRIVE) 26215, 26278, 26301 | (SIMMS) - EQUIPMENT FOR DAVID BROWN TRACTORS (1/65-12/72) |
| (B-05) - SUBFRAME AND SUPPORT 420 BLADE | (420) - INTERNATIONAL HARVESTER BLADE (1/63-12/88) |
| (B-07) - SUBFRAME AND SUPPORT 420 BLADE | (420) - INTERNATIONAL HARVESTER BLADE (1/63-12/88) |
| (B-08) - SUBFRAME AND SUPPORT 420 BLADE ON F-460, F-560, F-706 AND F-806 TRACTORS | (420) - INTERNATIONAL HARVESTER BLADE (1/63-12/88) |
| (M-2) - PLATFORM, PTO DRIVE SHAFT & CONNECTIONS | (H-1) - INTERNATIONAL HARVESTER ROTARY CUTTER (1/59-12/62) |
| (9B-14) - AXLE, MAIN FRAME, 25 THRU 35 AND 31 THRU 41 FOOT | (8100) - CASE IH AIR SEEDER (8/91-12/92) |
| (9B-24) - INNER WING AXLE, 43 THRU 47 AND 49 THRU 59 FOOT | (8100) - CASE IH AIR SEEDER (8/91-12/92) |
| (9B-26) - WING AXLE, 25 THRU 35 AND 31 THRU 41 FOOT, OUTER WING AXLE, 43 THRU 47 AND 49 THRU 59 FOOT | (8100) - CASE IH AIR SEEDER (8/91-12/92) |
| (9B-28) - DUAL WING AXLE, 25 THRU 35 AND 31 THRU 44 FOOT | (8100) - CASE IH AIR SEEDER (8/91-12/92) |
| (75.200.21) - ROW MARKER 12-30" OR 8-38" | (ROW MARKERS) - FOR TOOLBAR APPLICATIONS - DMI (1/94-12/06) |
| (75.200.21) - ROW MARKER 12-30" OR 8-38" | (ROW MARKERS) - FOR TOOLBAR APPLICATIONS - DMI (1/94-12/06) |
| (75.200.21) - 12-30 OR 8-38 ROW MARKER OPTION | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - MOUNTED (8/07-) |
| (75.200.11) - 18 DISC SEALER - 1 X 2 AND HCS SHANK | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/09) |
| (75.200.15) - ROW MARKER OPTION 4300 ONLY | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/09) |
| (75.200.06) - 18 INCH DISC SEALER (1 X 2 INCH SHANK) | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - MOUNTED (8/07-12/09) |
| (75.200.11) - 12-30 OR 8-38 ROW MARKER | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - MOUNTED (8/07-12/09) |
| (75.200.08) - 18 INCH DISC SEALER - 1 X 2 INCH SHANK | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/12) |
| (75.200.13) - DOUBLE FOLD ROW MARKER | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/12) |
| (75.200.21) - 12-30 OR 8-38 ROW MARKER OPTION | (3250) - DMI NUTRI-PLACR (1/92-12/07) |
| (75.200.10) - 18 DISC SEALER - 1 X 2 AND HCS SHANK | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (75.200.14) - ROW MARKER OPTION 4300 ONLY | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (75.200.10) - 18 DISC SEALER - 1 X 2 AND HCS SHANK | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (75.200.14) - ROW MARKER OPTION 4300 ONLY | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (75.200.07) - 18 INCH DISC SEALER - 1 X 2 INCH SHANK | (5310) - DMI NUTRI-TILL'R (6/06-12/09) |
| (75.200.12) - DOUBLE FOLD ROW MARKER | (5310) - DMI NUTRI-TILL'R (6/06-12/09) |
| (75.200.05) - 18 INCH DISC SEALER (1 X 2 INCH SHANK) | (5310) - DMI NUTRI-TILL'R - 6 & 8 ROW (1/00-12/09) |
| (75.200.10) - 12-30 OR 8-38 ROW MARKER | (5310) - DMI NUTRI-TILL'R - 6 & 8 ROW (1/00-12/09) |
| (75.200.06) - 18 INCH DISC SEALER (1 X 2 INCH SHANK) | (5310) - NUTRI-TILLER - MOUNTED (1/02-12/12) |
| (75.200.11) - 12-30 OR 8-38 ROW MARKER | (5310) - NUTRI-TILLER - MOUNTED (1/02-12/12) |
| (75.200.08) - 18 INCH DISC SEALER - 1 X 2 INCH SHANK | (5310) - NUTRI-TILLER - PULL TYPE (1/02-12/12) |
| (75.200.13) - DOUBLE FOLD ROW MARKER | (5310) - NUTRI-TILLER - PULL TYPE (1/02-12/12) |
| (9-074) - FRAME AND HITCH ENDWISE TRANSPORT, LEADING DRILL, CONT'D | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (9-008) - FRONT HITCH SINGLE DRILL | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (9-012) - HITCH SUPPORTS, MULTIPLE DRILLS | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (9-016) - FRONT HITCH TWO DRILL | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (9-018) - CENTER HITCH AND STABILIZER TWO DRILL | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (9-020) - HITCH TWO DRILL HEAVY DUTY, CONTINUED | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (9-032) - HITCH THREE DRILL HEAVY DUTY | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (9-040) - CENTER HITCH AND STABILIZER FOUR DRILL, 24 X 6, 28 X 6, 20 X 7 AND 24 X 7 | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (9-046) - HITCH FOUR DRILL HEAVY DUTY, 16 X 6 AND 20 X 6 | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (9-052) - HITCH FOUR DRILL HEAVY DUTY, 24 X 6, 28 X 6, 20 X 7 AND 24 X 7 | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (9-060) - FRAME AND HITCH ENDWISE TRANSPORT, LEADING DRILL, CONTINUED ON | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (9-144) - TRACK ERASER, CONTINUED | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (9-146) - TRACK ERASER | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (9-056) - BASIC HITCH AND CONNECTIONS, SINGLE DRILL HEAVY DUTY HITCH | (7100) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-070) - HEAVY DUTY HITCH, TWO DRILL, MACHINES BUILT 1980 THROUGH 1984 | (7100) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-074) - FRONT HITCH, TWO DRILL, MACHINES BUILT 1985 AND AFTER, WITH HITCH P.I.N. 501 AND AFTER | (7100) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-076) - CENTER HITCH & STABILIZER, TWO DRILL, MACHINES BUILT 1985 & AFTER, WITH HITCH P.I.N. 501 & AFTER | (7100) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-090) - HEAVY DUTY HITCH, FOUR DRILL, 819892C2, MACHINES BUILT 1980 THROUGH 1984 | (7100) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-096) - CENTER HITCH AND STABILIZER, FOUR DRILL, MACHINES BUILT 1985 AND AFTER | (7100) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-138) - FRAME HITCH, ENDWISE TRANSPORT, LEADING UNIT | (7100) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-048) - BASIC HITCH AND CONNECTIONS, SINGLE DRILL HEAVY DUTY HITCH | (7200) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-062) - HEAVY DUTY HITCH - TWO DRILL, MACHINES BUILT 1980 THROUGH | (7200) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-066) - FRONT HITCH - TWO DRILL, MACHINES BUILT 1985 AND AFTER | (7200) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-068) - CENTER HITCH AND STABILIZER - TWO DRILL, MACHINES BUILT 1985 | (7200) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-084) - HEAVY DUTY HITCH - FOUR DRILL, MACHINES BUILT 1980 THROUGH | (7200) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-090) - CENTER HITCH AND STABILIZER - FOUR DRILL, MACHINES BUILT | (7200) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-134) - FRAME AND HITCH CONNECTIONS - ENDWISE TRANSPORT, LEADING | (7200) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-104) - LIFT ASSIST PARTS, USED W/ FRAME SECTION NUMBER ONE, UNITS W/ SPRING CENTERED CASTER, 45' WIDE DRILL | (8500) - CASE IH AIR DRILL (8/86-12/89) |
| (9-080) - HOBBLE UNIT FOR STEERING WHEELS, CYCLO AIR HORIZONTAL FOLDING, ALL ROW SIZES | (900) - CASE IH PLANTER (1/87-12/95) |
| (9-294) - COU-TILL ATTACHMENT, CYCLO AIR & PLATE TRAILING, ALL ROW SIZES | (900) - CASE IH PLANTER (1/87-12/95) |
| (9D-12) - RESIDUE MANAGER | (950) - CASE IH SEMI-MOUNTED PLANTER (11/93-12/95) |
| (9A-068) - MAIN DRIVE, CENTER MAIN FRAME, 12/23 SOLID ROW CROP - FRONT FOLD | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (9A-072) - MAIN DRIVE, LEFT-HAND WING FRAME, 12/23 SOLID ROW CROP - FRONT FOLD | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (75.200.03) - PARABOLIC SHANK | (1300) - DMI ECOLO-CHAMP COLTER CHISEL (1/85-12/92) |
| (75.200.23) - DOUBLE FOLD ROW MARKER | (2500) - CASE IH RIP-STRIP (2/04-4/12) |
| (75.200.23) - DOUBLE FOLD ROW MARKER | (2500 ECOLO-TIL) - CASE IH INLINE RIPPER (2/04-) |
| (75.200.23) - DOUBLE FOLD ROW MARKER | (2500 ECOLO-TIL) - DMI IN LINE RIPPER (2/04-12/07) |
| (39.100.01) - MAIN FRAME | (527B) - CASE IH ECOLO-TIGER MULCH CHISEL (1/86-12/08) |
| (39.100.01) - MAIN FRAME | (527B) - DMI ECOLO-TIGER (1/97-12/08) |
| (75.200.07) - LEAD SHANK ASSEMBLY | (530B) - DMI ECOLO-TIGER (1/97-12/07) |
| (75.200.06) - LEAD SHANK ASSEMBLY | (530B) - ECOLO-TIGER MULCH CHISEL (1/97-12/05) |
| (9-68[1]) - 12 Foot Primary Wing Double Fold | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (9-68) - CASTER WHELL MOUNTING, MAIN FRAME, 12 FOOT PRIMARY WING | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (09-68) - CASTER WHEEL MOUNTING | (5850) - CASE IH CHISEL PLOW (1/96-12/00) |
| (75.200.05) - PARABOLIC SHANK | (6700) - CHISEL PLOW (1/00-12/06) |
| (75.200.05) - PARABOLIC SHANK | (6750) - CHISEL PLOW (1/00-12/06) |
| (009) - PARABOLIC SHANK - MODEL 6750 | (6750) - PARABOLIC CHISEL (1/00-12/06) |
| (75.200.07) - LEAD SHANK ASSEMBLY | (730B) - DMI ECOLO-TIGER (1/97-12/07) |
| (75.200.06) - LEAD SHANK ASSEMBLY | (730B) - ECOLO-TIGER MULCH CHISEL (1/02-12/05) |
| (75.200.03) - PARABOLIC SHANK | (900) - DMI ECOLO-CHAMP COLTER CHISEL (1/85-12/92) |
| (75.200.06) - AUTO-RESET SHANK - 1984 | (COULTER) - CHAMP II - DMI (1/82-12/90) |
| (39.100.01) - SINGLE FOLD MAIN FRAME 12-1/2 THROUGH 38-1/2 | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (39.100.08) - DOUBLE FOLD INNER WING 38-1/2 THROUGH 50-1/2 MODELS | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (39.100.10) - 54-1/2 TO 60-1/2 DOUBLE FOLD INNER WING | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (39.100.11) - 54-1/2 TO 60-1/2 DOUBLE FOLD OUTER WING | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (9-024) - PNEUMATIC GAUGE WHEEL AND MOUNTING, DIRECT MOUNTED MODELS, SLIDE ADJUSTING TYPE | (4500) - CASE IH VIBRA SHANK CULTIVATOR (1/91-12/98) |
| (9-044) - PNEUMATIC GAUGE WHEEL AND MOUNTING, TRAIL BEHIND MODELS, SLIDE ADJUSTING TYPE | (4500) - CASE IH VIBRA SHANK CULTIVATOR (1/91-12/98) |
| (9-058) - WING LIFT UNIT, WING TYPE MODELS, 22 FOOT 6 INCH BASIC SIZE | (4500) - CASE IH VIBRA SHANK CULTIVATOR (1/91-12/98) |
| (9-060) - WING LIFT UNIT, WING TYPE MODELS, 31 FOOT 6 INCH BASIC SIZE | (4500) - CASE IH VIBRA SHANK CULTIVATOR (1/91-12/98) |
| (39.100.01) - SINGLE FOLD MAIN FRAME 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.08) - DOUBLE FOLD INNER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.09) - 54-1/2 TO 60-1/2 DOUBLE FOLD INNER WING | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.11) - 54-1/2 TO 60-1/2 DOUBLE FOLD OUTER WING | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.01) - SINGLE FOLD MAIN FRAME 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.08) - DOUBLE FOLD INNER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.09) - 54-1/2 TO 60-1/2 DOUBLE FOLD INNER WING | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.11) - 54-1/2 TO 60-1/2 DOUBLE FOLD OUTER WING | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.01) - SINGLE FOLD MAIN FRAME 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.08) - DOUBLE FOLD INNER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.09) - 54-1/2 TO 60-1/2 DOUBLE FOLD INNER WING | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.11) - 54-1/2 TO 60-1/2 DOUBLE FOLD OUTER WING | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.01) - SINGLE FOLD MAIN FRAME 12-1/2 THROUGH 38-1/2 | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (39.100.08) - DOUBLE FOLD INNER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (39.100.10) - 54-1/2 TO 60-1/2 DOUBLE FOLD INNER WING | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (39.100.11) - 54-1/2 TO 60-1/2 DOUBLE FOLD OUTER WING | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (39.100.01) - SINGLE FOLD MAIN FRAME 12-1/2 THROUGH 38-1/2 | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (39.100.08) - DOUBLE FOLD INNER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (39.100.09) - 54-1/2 TO 60-1/2 DOUBLE FOLD INNER WING | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (39.100.11) - 54-1/2 TO 60-1/2 DOUBLE FOLD OUTER WING | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (9-04) - HITCH | (3800) - CASE IH DISK HARROW (1/87-12/97) |
| (9-10) - CENTER SHANK ATTACHMENT, 8 INCH SWEEP, HEAVY DUTY | (485) - CASE IH DISK HARROW (1/75-12/02) |
| (9-10) - CENTER SHANK ATTACHMENT, 8 INCH SWEEP, HEAVY DUTY | (501) - CASE IH DISK HARROW (1/76-12/02) |
| (9-24) - CENTER SHANK ATTACHMENT - 8 INCH SWEEP, HEAVY DUTY | (596) - CASE IH DISK HARROW (1/80-12/00) |
| (39.100.01) - SINGLE FOLD MAIN FRAME 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.08) - DOUBLE FOLD INNER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.09) - 54-1/2 TO 60-1/2 DOUBLE FOLD INNER WING | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.11) - 54-1/2 TO 60-1/2 DOUBLE FOLD OUTER WING | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.01) - SINGLE FOLD MAIN FRAME 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.08) - DOUBLE FOLD INNER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.09) - 54-1/2 TO 60-1/2 DOUBLE FOLD INNER WING | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.11) - 54-1/2 TO 60-1/2 DOUBLE FOLD OUTER WING | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.01) - SINGLE FOLD MAIN FRAME 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.08) - DOUBLE FOLD INNER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.09) - 54-1/2 TO 60-1/2 DOUBLE FOLD INNER WING | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.11) - 54-1/2 TO 60-1/2 DOUBLE FOLD OUTER WING | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (9-04) - ROCKSHAFT | (700) - CASE IH HI-CLEARANCE TRAILING MOLDBOARD PLOW (1/67-12/00) |
| (9-05) - FRONT FURROW WHEEL | (700) - CASE IH HI-CLEARANCE TRAILING MOLDBOARD PLOW (1/67-12/00) |
| (9-13) - COLTER ATTACHING PARTS AND DISK ADAPTER | (700) - CASE IH HI-CLEARANCE TRAILING MOLDBOARD PLOW (1/67-12/00) |
| (9-42) - COLTER CLAMPS AND ADAPTER | (720) - CASE IH MOLDBOARD PLOW (1/78-12/91) |
| (9-48) - FRONT FURROW WHEEL, FOR 5 THRU 8 FURROW, ON THE LAND, CONTINUED | (720) - CASE IH MOLDBOARD PLOW (1/78-12/91) |
| (9-05) - FRONT FURROW WHEEL | (800) - CASE IH MOLDBOARD PLOW (1/96-12/00) |
| (9-20) - COLTER ATTACHING PARTS | (800) - CASE IH MOLDBOARD PLOW (1/96-12/00) |
| (75.200.02) - QUAD PARABOLIC ASSEMBLY | (1000) - DMI ECOLO-TIL (1/89-12/95) |
| (9-30) - PRIMARY WING LIFT AND HINGE, 31 FOOT (9.4 M) THROUGH 34 FOOT | (4900) - CASE IH VIBRA TILLER (9/87-12/95) |
| (9-32) - PRIMARY WING LIFT AND HINGE, 37 FOOT (11.4 M) THROUGH 52 | (4900) - CASE IH VIBRA TILLER (9/87-12/95) |
| (75.200.17) - BASKET HARROW PARTS BREAKDOWN 2008 MODELS | (330 TRUE-TANDEM) - 22'-34' DISK HARROW (8/07-12/14) |
| (05.01) - SINGLE AXLE | (FHX300) - CASE IH PULL-TYPE FORAGE HARVESTER (11/01-12/15) |
| (F-004) - MAIN FRAME | (555) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/73-12/75) |
| (9A-038) - FEED ROLL DRIVE, CONTINUED | (781) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/86) |
| (9A-038) - FEED ROLL DRIVE, CONTINUED | (881) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/92) |
| (17-033) - STRAW CHOPPER DRIVE | (1460) - INTERNATIONAL HARVESTER COMBINE (EUROPE) (1/77-12/84) |
| (10-095) - HYDRAULIC REEL DRIVE, SEPARATOR PARTS | (1460) - INTERNATIONAL HARVESTER COMBINE (EUROPE) (1/77-12/84) |
| (6-04) - POWER TAKEOFF DRIVE (CON'T) | (1620) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0032630 & AFTER) (NORTH AMERICA) (1/90-12/92) |
| (9A-40) - ROCK TRAP, (CONT) | (1640) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0034705) (NORTH AMERICA) (1/86-12/92) |
| (6-04) - POWER TAKEOFF DRIVE | (1640) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0034705 & AFTER) (NORTH AMERICA) (1/86-12/92) |
| (20) - POWER TAKE-OFF DRIVE | (1640) - COMBINE SUPPLEMENT (1/86-12/92) |
| (6-02) - POWER TAKEOFF DRIVE | (1644) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (9A-44) - FEEDER REVERSER, WITHOUT ROCK TRAP | (1644) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (2-02) - RADIATOR AND ATTACHING PARTS | (1660) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0038346) (NORTH AMERICA) (1/86-12/89) |
| (2-52) - ENGINE RAILS AND SUPPORTS, DT466B ENGINE | (1660) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0038346) (NORTH AMERICA) (1/86-12/89) |
| (9A-40) - ROCK TRAP, (CONT'D) | (1660) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0038346) (NORTH AMERICA) (1/86-12/89) |
| (6-04) - POWER TAKEOFF DRIVE (CONT'D) | (1660) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0038346 & AFTER) (NORTH AMERICA) (1/86-12/89) |
| (018) - POWER TAKE-OFF DRIVE | (1660) - COMBINE SUPPLEMENT (S/N JJC0038346 & AFTER) (1/86-12/91) |
| (6-02) - POWER TAKEOFF DRIVE | (1666) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (9A-44) - FEEDER REVERSER, WITHOUT ROCK TRAP | (1666) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (2-02) - RADIATOR AND RESERVOIR TANK | (1680) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0045689) (NORTH AMERICA) (1/86-7/89) |
| (2-50) - ENGINE RAILS AND SUPPORTS, DTI-466C DIESEL ENGINE | (1680) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0045689) (NORTH AMERICA) (1/86-7/89) |
| (6-002) - POWER TAKEOFF DRIVE | (1680) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0045689 & AFTER) (NORTH AMERICA) (8/89-12/92) |
| (9A-44) - FEEDER REVERSER, WITHOUT ROCK TRAP | (1680) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0045689 & AFTER) (NORTH AMERICA) (8/89-12/92) |
| (020) - POWER TAKE-OFF DRIVE | (1680) - COMBINE SUPPLEMENT (1/86-12/88) |
| (6-02) - POWER TAKEOFF DRIVE | (1688) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (9A-44) - FEEDER REVERSER, WITHOUT ROCK TRAP | (1688) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (6-02) - POWER TAKEOFF DRIVE | (2144) - CASE IH AXIAL-FLOW COMBINE (1/95-12/97) |
| (6-02) - POWER TAKEOFF DRIVE | (2166) - CASE IH AXIAL-FLOW COMBINE (NA) (1/95-12/97) |
| (6-02) - POWER TAKEOFF DRIVE | (2188) - CASE IH AXIAL-FLOW COMBINE (NA) (1/95-12/97) |
| (06-01) - POWER TAKEOFF DRIVE | (2344) - CASE IH AXIAL-FLOW COMBINE (1/98-1/02) |
| (06-01) - POWER TAKEOFF DRIVE - BSN JJC0253999 | (2366) - CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04) |
| (06-02) - POWER TAKEOFF DRIVE - ASN JJC0254000 | (2366) - CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04) |
| (06-01) - POWER TAKEOFF DRIVE | (2377) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001&HAJ300000 (11/04-12/07) |
| (06-01[01]) - POWER TAKEOFF DRIVE, BSN JJC0270499 | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BSN JJC0276540 (10/97-12/04) |
| (06-01[02]) - POWER TAKEOFF DRIVE, ASN JJC0270500 | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BSN JJC0276540 (10/97-12/04) |
| (06-01) - POWER TAKEOFF DRIVE | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001 & HAJ300000 (1/98-12/07) |
| (06-01) - POWER TAKEOFF DRIVE | (2388) - CASE IH AXIAL-FLOW COMBINE (RU) ASN HAJ300001 (10/06-12/07) |
| (14.102.01) - POWER TAKEOFF DRIVE | (2577) - AXIAL-FLOW COMBINE (NA) ASN HAJ0300001 (1/06-12/07) |
| (14.102.01) - POWER TAKEOFF DRIVE | (2588) - CASE IH AXIAL-FLOW COMBINE (NA) ASN HAJ300001 (10/06-12/06) |
| (14.100.BH) - PTO BELT & MOUNTING PARTS | (5088) - AXIAL-FLOW COMBINE (NA) (4/07-1/12) |
| (80.175.AG[02]) - UNLOADER DRIVER, PULLEY & TENSIONER | (5088) - AXIAL-FLOW COMBINE (NA) (4/07-1/12) |
| (14.100.BH) - PTO BELT & MOUNTING PARTS | (6088) - AXIAL-FLOW COMBINE (NA) (4/07-1/12) |
| (80.175.AG[02]) - UNLOADER DRIVER, PULLEY & TENSIONER | (6088) - AXIAL-FLOW COMBINE (NA) (4/07-1/12) |
| (80.175.AG[04]) - UNLOADER BELT DRIVE ASSY | (6130) - COMBINE - TIER 4 COMMON CAB (1/13-3/14) |
| (80.175.03[02]) - UNLOADER, BELT DRIVE, 3.0 BU/SEC - 6130 & 7130 | (6130) - COMBINE TIER 4 (1/12-1/13) |
| (80.175.AG[04]) - UNLOADER BELT DRIVE ASSY (CONT.) | (6140) - COMBINE - TIER 4B (NA) (3/14-10/15) |
| (14.100.BH) - PTO BELT & MOUNTING PARTS | (7088) - AXIAL-FLOW COMBINE (NA) (4/07-1/12) |
| (80.175.AG[02]) - UNLOADER DRIVER, PULLEY & TENSIONER | (7088) - AXIAL-FLOW COMBINE (NA) (4/07-1/12) |
| (80.175.AG[04]) - UNLOADER BELT DRIVE ASSY | (7130) - COMBINE - TIER 4 COMMON CAB (1/13-3/14) |
| (80.175.03[02]) - UNLOADER, BELT DRIVE, 3.0 BU/SEC - 6130 & 7130 | (7130) - COMBINE TIER 4 (1/12-1/13) |
| (80.175.AG[04]) - UNLOADER BELT DRIVE ASSY (CONT.) | (7140) - COMBINE - TIER 4B (NA) - 2014 (3/14-10/15) |
| (9A-48) - ROCK TRAP, (CONT) | (1670) - CASE IH HILLSIDE COMBINE (1/89-12/91) |
| (6-04) - POWER TAKEOFF DRIVE, (CONT) | (1670) - CASE IH HILLSIDE COMBINE (S/N JJC0080540 & AFTER) (8/90-12/91) |
| (135) - SEPARATOR DRIVE CLUTCH AND THROTTLE CONTROLS, SERIAL NO.7278 AND ABOVE | (303) - INTERNATIONAL HARVESTER COMBINE (BEAN SPECIAL) (1/62-12/68) |
| (R-41) - SEPARATOR, STRAW CHOPPER DRIVE | (315) - INTERNATIONAL HARVESTER COMBINE (1/67-12/70) |
| (33-05) - FEEDER, FEEDER DRIVE, BELT TYPE | (615) - INTERNATIONAL HARVESTER COMBINE (1/71-12/75) |
| (134) - SEPARATOR DRIVE CLUTCH AND THROTTLE CONTROLS, SERIAL NO. 7224 AND BOVE | (403) - INTERNATIONAL HARVESTER COMBINE (1/62-12/71) |
| (9A-38) - DRUM ROTOR AND DRIVE CAMS | (2055) - CASE IH COTTON EXPRESS COTTON PICKER (1/90-12/93) |
| (9A-40) - DRUM ROTOR AND DRIVE CAMS | (2155) - CASE IH COTTON EXPRESS COTTON PICKER (2/95-12/96) |
| (09A-17) - DRUM ROTOR AND DRIVE CAMS | (2555) - CASE IH COTTON EXPRESS COTTON PICKER (AFTER S/N JJC0249500) (8/00-12/05) |
| (09A-18) - DRUM ROTOR AND DRIVE CAMS | (2555) - CASE IH COTTON EXPRESS COTTON PICKER (BEFORE S/N JJC0249499) (1/97-7/00) |
| (09A-18) - DRUM ROTOR AND DRIVE CAMS | (420) - CASE IH COTTON EXPRESS COTTON PICKER (9/06-12/10) |
| (09A-21) - DRUM ROTOR AND DRIVE CAMS | (420 TIER 3) - COTTON EXPRESS COTTON PICKER (3/08-12/10) |
| (09A-18) - DRUM ROTOR AND DRIVE CAMS | (620) - CASE IH COTTON EXPRESS COTTON PICKER (9/06-) |
| (60.600.17) - DRUM ROTOR AND DRIVE CAMS | (625) - MODULE EXPRESS COTTON PICKER (6/06-12/10) |
| (60.600.17) - DRUM ROTOR AND DRIVE CAMS | (635) - MODULE EXPRESS (1/08-7/13) |
| (09A-19) - DRUM ROTOR AND DRIVE CAMS | (CPX420) - CASE IH COTTON PICKER (5/05-8/06) |
| (09A-14) - DRUM ROTOR AND DRIVE CAMS | (CPX610) - CASE IH COTTON PICKER (8/01-12/05) |
| (09A-19) - DRUM ROTOR AND DRIVE CAMS | (CPX620) - CASE IH COTTON PICKER (5/05-8/06) |
| (09-28) - HYDRAULIC FORE-AFT REEL 2 ARM POSITIONER, 21.0 AND 25.0 FOOT HEADER BSN CCC0011153 | (1052) - DRAPER HEADER (1/99-3/03) |
| (09-29) - HYDRAULIC FORE-AFT REEL 3 ARM POSITIONER, 30.0 AND 36.0 FOOT HEADER BSN CCC0011153 | (1052) - DRAPER HEADER (1/99-3/03) |
| (09-31) - HYDRAULIC FORE-AFT REEL 3 ARM POSITIONER, 30.0 AND 36.0 FOOT HEADER ASN CCC0011154 | (1052) - DRAPER HEADER (1/99-3/03) |
| (09-33) - TRANSPORT OPTION HITCH AND LIGHTS, NOT FOR EUROPE | (1052) - DRAPER HEADER (1/99-3/03) |
| (09-07) - HYDRAULIC FORE-AFT REEL 2 ARM POSITIONER, 21.0 AND 25.0 FOOT HEADER | (2052) - DRAPER HEADER (4/03-9/06) |
| (09-08) - HYDRAULIC FORE-AFT REEL 3 ARM POSITIONER, 30.0, 36.0 AND 39.0 FOOT HEADER | (2052) - DRAPER HEADER (4/03-9/06) |
| (09-32) - TRANSPORT OPTION HITCH AND LIGHTS - 30.0 & 36.0 FOOT HEADERS | (2052) - DRAPER HEADER (4/03-9/06) |
| (09-06) - HYDRAULIC FORE-AFT REEL POSITIONER | (2062) - DRAPER HEADER (4/03-9/06) |
| (09-25) - TRANSPORT OPTION HITCH AND LIGHTS | (2062) - DRAPER HEADER (4/03-9/06) |
| (9-054) - REEL CONTROL ATTACHMENT, HYDRAULIC REEL DRIVE, 1420E, 1440E, 1460E AND 1480E COMBINE | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9A-46) - REEL CONTROL ATTACHMENT, HYDRAULIC REEL DRIVE, 1440E, 1460E, 1480E COMBINE | (1010) - GRAIN HEADER (S/N JJC0200001 THROUGH JJC0300000) (6/93-12/04) |
| (9A-46) - REEL HYDRAULIC DRIVE CONTROL ATTACHMENT, 1420E, 1440E, 1460E COMBINE | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9A-34) - REEL CONTROL ATTACHMENT, HYDRAULIC REEL DRIVE, 1440E, 1460E, 1480E COMBINE (CONT'D) | (1020) - GRAIN HEADER (S/N JJC0215001 TO JJC0227000) (12/94-12/02) |
| (9-26) - KNIFE DRIVE, 721, 725, AND 730 WINDROWERS | (721) - CASE IH PULL-TYPE WINDROWER (1/90-12/99) |
| (9-26) - KNIFE DRIVE, 721, 725, AND 730 WINDROWERS | (725) - CASE IH PULL-TYPE WINDROWER (1/86-12/90) |
| (9-26) - KNIFE DRIVE, 721, 725, AND 730 WINDROWERS | (730) - CASE IH PULL-TYPE WINDROWER (1/84-12/90) |
| (B-17) - POWER TRAIN, POWER STEERING PUMP AND DRIVE | (375) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (5.08[2]) - REEL ARMS, STANDARD, 18 TO 36 FT, FROM PIN D28 2002 | (DHX181) - CASE IH DRAPER HEADER (3/02-3/05) |
| (5.08[2]) - REEL ARMS, STANDARD, 18 TO 36 FT, FROM PIN D28 2002 | (DHX211) - CASE IH DRAPER HEADER (3/02-3/05) |
| (5.08[2]) - REEL ARMS, STANDARD, 18 TO 36 FT, FROM PIN D28 2002 | (DHX251) - CASE IH DRAPER HEADER (3/02-3/05) |
| (5.08[2]) - REEL ARMS, STANDARD, 18 TO 36 FT, FROM PIN D28 2002 | (DHX301) - CASE IH DRAPER HEADER (3/02-3/05) |
| (5.08[2]) - REEL ARMS, STANDARD, 18 TO 36 FT, FROM PIN D28 2002 | (DHX361) - CASE IH DRAPER HEADER (3/02-3/05) |
| (04-03) - BRAKES, MASTER BRAKE & CONTROLS, TRACTORS W/DUAL CALIPER BRAKE SYSTEM | (4366) - INTERNATIONAL 4WD DIESEL TRACTOR (1/73-12/76) |
| (04-05) - BRAKES, MASTER BRAKE AND CONTROLS, 4386 TRACTORS WITH SERIAL NO. 1500 AND BELOW | (4386) - INTERNATIONAL 4WD DIESEL TRACTOR (1/76-12/81) |
| (2-096) - ENGINE MOUNTING | (9310) - CASE IH 4WD TRACTOR (6/95-8/00) |
| (2-096) - ENGINE MOUNTING | (9330) - CASE IH 4WD TRACTOR (1/96-8/00) |
| (9-02) - UNIVERSAL DRAWBAR | (885) - DAVID BROWN DIESEL TRACTOR W/Q CAB (S/N 11000001 TO 11021851) (1/76-12/83) |
| (9-48) - CAB FLOOR AND MOUNTINGS, 885Q, 885QH AND 885SK TRACTORS | (885) - DAVID BROWN DIESEL TRACTOR W/Q CAB (S/N 11000001 TO 11021851) (1/76-12/83) |
| (9-02) - UNIVERSAL DRAWBAR | (885N) - DAVID BROWN DIESEL TRACTOR W/Q CAB (S/N 11000001 TO 11021851) (1/76-12/83) |
| (9-48) - CAB FLOOR AND MOUNTINGS, 885Q, 885QH AND 885SK TRACTORS | (885N) - DAVID BROWN DIESEL TRACTOR W/Q CAB (S/N 11000001 TO 11021851) (1/76-12/83) |
| (187) - FRONT AXLE, ADJUSTABLE FRONT AXLE AND CONNECTIONS, FARMALL HI-CLEAR TRACTORS | (504) - FARMALL DIESEL TRACTOR (1/61-12/68) |
| (187) - FRONT AXLE, ADJUSTABLE FRONT AXLE AND CONNECTIONS, FARMALL HI-CLEAR TRACTORS | (504) - FARMALL GAS TRACTOR (1/60-12/68) |
| (13-16) - SUPERSTRUCTURE, TRACTOR CAB AND CONNECTIONS | (826) - FARMALL TRACTOR (1/69-12/71) |
| (07-29) - DRIVE TRAIN, DIFFERENTIAL LOCK, TRACTOR WITH SERIAL NO. 10011 AND BELOW | (HYDRO 186) - INTERNATIONAL DIESEL TRACTOR (1/76-12/78) |
| (07-31) - DRIVE TRAIN, DIFFERENTIAL LOCK ATTACHMENT, TRACTOR WITH SERIAL NO. 10012 AND ABOVE | (HYDRO 186) - INTERNATIONAL DIESEL TRACTOR (1/76-12/78) |
| (07-46) - REAR AXLE CARRIER AND CONNECTIONS | (2400) - INTERNATIONAL SERIES-A TRACTOR (EUROPE) (1/71-12/73) |
| (07-46) - REAR AXLE CARRIER AND CONNECTIONS | (454) - INTERNATIONAL SERIES-A TRACTOR (EUROPE) (1/71-12/73) |
| (122) - FRONT AXLE, STEERING KNUCKLES, ADJUSTABLE FRONT AXLE AND SUPPORTS | (606) - INTERNATIONAL GAS TRACTOR (1/62-12/67) |
| (B-23) - POWER TRAIN, FRONT AXLE AND CONNECTIONS, FARMALL TRACTORS WITH ALL WHEEL DRIVE | (706) - INTERNATIONAL TRACTOR (1/63-12/67) |
| (B-25) - POWER TRAIN, FRONT AXLE AND CONNECTIONS, INTERNATIONAL TRACTORS WITH ALL WHEEL DRIVE | (706) - INTERNATIONAL TRACTOR (1/63-12/67) |
| (07-39) - DRIVE TRAIN, FRONT AXLE AND CONNECTIONS, FARMALL TRACTORS WITH ALL WHEEL DRIVE | (1026) - INTERNATIONAL DIESEL TRACTOR (1/70-12/88) |
| (13-16) - SUPERSTRUCTURE, TRACTOR CAB AND CONNECTIONS | (1026) - INTERNATIONAL DIESEL TRACTOR (1/70-12/88) |
| (07-15) - DRIVE TRAIN, DIFFERENTIAL LOCK ATTACHMENT | (1486) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (07-14) - DRIVE TRAIN, REAR DRIVE AXLE | (1566) - INTERNATIONAL DIESEL TRACTOR (1/73-12/78) |
| (07-14) - DRIVE TRAIN, REAR DRIVE AXLE | (1568) - INTERNATIONAL DIESEL TRACTOR (1/74-12/78) |
| (07-39) - DRIVE TRAIN, FRONT AXLE AND CONNECTIONS, FARMALL TRACTORS WITH ALL WHEEL DRIVE | (21026) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/69-12/88) |
| (13-16) - SUPERSTRUCTURE, TRACTOR CAB AND CONNECTIONS | (21026) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/69-12/88) |
| (8-112) - HITCH SYSTEM, ROCKSHAFT, POWER ARMS AND PISTONS | (2394) - CASE DIESEL TRACTOR (1/85-12/87) |
| (8-112) - HITCH SYSTEM, ROCKSHAFT, POWER ARMS AND PISTONS | (2594) - CASE DIESEL TRACTOR (1/85-12/87) |
| (07-27) - DRIVE TRAIN, DIFFERENTIAL LOCK, 3388 AND 3588 TRACTORS | (3388) - INTERNATIONAL ARTICULATED TRACTOR (1/79-12/81) |
| (8-72) - HITCH SYSTEM, ROCKSHAFT, POWER ARMS AND PISTONS | (3394) - CASE DIESEL TRACTOR (1/85-12/87) |
| (07-27) - DRIVE TRAIN, DIFFERENTIAL LOCK ATTACHMENT | (3488) - INTERNATIONAL HYDROSTATIC TRACTOR (1/81-12/86) |
| (07-27) - DRIVE TRAIN, DIFFERENTIAL LOCK, 3388 AND 3588 TRACTORS | (3588) - INTERNATIONAL ARTICULATED TRACTOR (1/78-12/81) |
| (8-072) - HITCH SYSTEM, ROCKSHAFT, POWER ARMS AND PISTONS | (3594) - CASE DIESEL TRACTOR (1/85-12/87) |
| (07-15) - DRIVE TRAIN, DIFFERENTIAL LOCK ATTACHMENT | (886) - INTERNATIONAL DIESEL TRACTOR (1/76-12/80) |
| (07-15) - DRIVE TRAIN, DIFFERENTIAL LOCK ATTACHMENT | (986) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (2-014) - ENGINE MOUNTING | (9210) - CASE IH STEIGER 4WD TRACTOR (9/90-5/95) |
| (2-014) - ENGINE MOUNTING | (9230) - CASE IH STEIGER 4WD TRACTOR (9/90-5/95) |
| (2-026) - ENGINE MOUNTING, 9250 AND 9260 TRACTORS | (9250) - CASE IH STEIGER 4WD TRACTOR (9/90-5/95) |
| (2-026) - ENGINE MOUNTING, 9250 AND 9260 TRACTORS | (9260) - CASE IH STEIGER 4WD TRACTOR (10/90-10/94) |
| (2-16) - ENGINE MOUNTING AND ATTACHING PARTS | (9270) - CASE IH STEIGER POWER SHIFT 4WD TRACTOR (9/90-1/91) |
| (2-16) - ENGINE MOUNTING AND ATTACHING PARTS | (9280) - CASE IH STEIGER POWER SHIFT 4WD TRACTOR (1/90-1/91) |
| (J-02) - STEERING MECHANISM | (2444) - INTERNATIONAL INDUSTRIAL TRACTOR (1/67-12/71) |
| (187) - FRONT AXLE, ADJUSTABLE FRONT AXLE AND CONNECTIONS, FARMALL HI-CLEAR TRACTORS | (2504) - INTERNATIONAL TRACTOR (1/62-12/68) |
| (122) - FRONT AXLE, STEERING KNUCKLES, ADJUSTABLE FRONT AXLE AND SUPPORTS | (2606) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/62-12/67) |
| (B-23) - POWER TRAIN, FRONT AXLE AND CONNECTIONS, FARMALL TRACTORS WITH ALL WHEEL DRIVE | (2706) - INTERNATIONAL INDUSTRIAL TRACTOR (1/63-12/67) |
| (B-25) - POWER TRAIN, FRONT AXLE AND CONNECTIONS, INTERNATIONAL TRACTORS WITH ALL WHEEL DRIVE | (2706) - INTERNATIONAL INDUSTRIAL TRACTOR (1/63-12/67) |
| (J-23) - STEERING MECHANISM, FRONT AXLE AND CONNECTIONS, INTERNATIONAL TRACTORS WITH ALL WHEEL DRIVE | (2806) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/63-12/76) |
| (13-16) - SUPERSTRUCTURE, TRACTOR CAB AND CONNECTIONS | (2826) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/69-12/71) |
| (N-10) - PARTS ACCESSORIES AND ATTACHMENTS, TRACTOR CAB AND CONNECTIONS, EXCEL CABS | (2856) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/67-12/76) |
| (6-132) - REAR WHEEL WEIGHTS, SPLIT TYPE, 24 & 26 INCH WHEELS, 28 OR 30 INCH WHEELS, 1ST & 2ND POSITION | (3220) - CASE IH TRACTOR (AFTER S/N 11070000) (NORTH AMERICA) (1/94-12/98) |
| (6-132) - REAR WHEEL WEIGHTS, SPLIT TYPE, 24 & 26 INCH WHEELS, 28 OR 30 INCH WHEELS, 1ST & 2ND POSITION | (3230) - CASE IH TRACTOR (NORTH AMERICA) (1/94-12/98) |
| (6-130) - REAR WHEEL WEIGHTS, SPLIT TYPE, 24 AND 26 IN., 28 AND 30 IN. WHEELS, 1ST AND 2ND POSITIONS | (4230) - CASE IH TRACTOR (NORTH AMERICA) (1/94-12/98) |
| (6-130) - REAR WHEEL WEIGHTS, SPLIT TYPE, 24 AND 26 IN., 28 AND 30 IN. WHEELS, 1ST AND 2ND POSITIONS | (4240) - CASE IH TRACTOR (NORTH AMERICA) (1/94-12/98) |
| (J-02) - STEERING MECHANISM | (444) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/67-12/71) |
| (J-23) - STEERING MECHANISM, FRONT AXLE AND CONNECTIONS, INTERNATIONAL TRACTORS WITH ALL WHEEL DRIVE | (806) - INTERNATIONAL TRACTOR (1/63-12/76) |
| (13-16) - SUPERSTRUCTURE, TRACTOR CAB AND CONNECTIONS | (826) - INTERNATIONAL TRACTOR (1/69-12/71) |
| (N-10) - PARTS ACCESSORIES AND ATTACHMENTS, TRACTOR CAB AND CONNECTIONS, EXCEL CABS | (856) - INTERNATIONAL TRACTOR (1/67-12/83) |
| (06-49) - REAR WHEEL WEIGHT | (C100) - CASE DIESEL TRACTOR (1/98-12/02) |
| (06-48) - REAR WHEEL WEIGHT, N.A. ONLY | (C50) - CASE DIESEL STRADDLE TRACTOR (1/98-12/02) |
| (06-48) - REAR WHEEL WEIGHT, N.A. ONLY | (C60) - CASE DIESEL STRADDLE TRACTOR (1/98-12/02) |
| (06-49) - REAR WHEEL WEIGHT | (C70) - CASE DIESEL TRACTOR (1/98-12/02) |
| (06-49) - REAR WHEEL WEIGHT | (C80) - CASE DIESEL TRACTOR (1/98-12/02) |
| (06-49) - REAR WHEEL WEIGHT | (C90) - CASE DIESEL TRACTOR (1/98-12/02) |
| (298) - ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLE, SPECIAL, FARMALL 240 TRACTORS | (200) - FARMALL TRACTOR (1/54-12/56) |
| (298) - ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLE, SPECIAL, FARMALL 240 TRACTORS | (230) - FARMALL GAS TRACTOR (1/56-12/58) |
| (298) - ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLE, SPECIAL, FARMALL 240 TRACTORS | (240) - FARMALL TRACTOR (1/58-12/61) |
| (328) - ATTACHMENTS, FRONT FRAME CHANNEL WEIGHTS, SPECIAL | (300) - FARMALL TRACTOR (1/54-12/56) |
| (328) - ATTACHMENTS, FRONT FRAME CHANNEL WEIGHTS, SPECIAL | (350) - FARMALL TRACTOR (1/56-12/58) |
| (413) - ATTACHMENTS, FRONT FRAME CHANNEL WEIGHT, SPECIAL | (400-SERIES) - FARMALL DIESEL TRACTORS (1/54-12/56) |
| (413) - ATTACHMENTS, FRONT FRAME CHANNEL WEIGHT, SPECIAL | (400-SERIES) - FARMALL GAS TRACTORS (1/54-12/56) |
| (086) - FRONT AXLE, ADJUSTABLE WIDE TREAD FRONT AXLE, FARMALL 404 | (404) - FARMALL TRACTOR (1/61-12/67) |
| (413) - ATTACHMENTS, FRONT FRAME CHANNEL WEIGHT, SPECIAL | (450-SERIES) - FARMALL DIESEL TRACTORS (1/56-12/58) |
| (413) - ATTACHMENTS, FRONT FRAME CHANNEL WEIGHT, SPECIAL | (450-SERIES) - FARMALL GAS TRACTORS (1/56-12/58) |
| (B-23) - POWER TRAIN, FRONT AXLE AND CONNECTIONS, FARMALL TRACTORS WITH ALL WHEEL DRIVE | (706) - FARMALL TRACTOR (1/63-12/67) |
| (B-25) - POWER TRAIN, FRONT AXLE AND CONNECTIONS, INTERNATIONAL TRACTORS WITH ALL WHEEL DRIVE | (706) - FARMALL TRACTOR (1/63-12/67) |
