| Узел | Модель |
|---|
| (16) - HITCH, PRIOR TO P.I.N. 001530 | (3650) - CASE IH ROUND TIE BALER (1/84-12/88) |
| (A-59) - TRAILER HITCH ATTACHMENT | (428) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/76-12/88) |
| (A-59) - TRAILER HITCH ATTACHMENT | (435) - INTERNATIONAL HARVESTER RECTANGULAR BALER (NORTH AMERICA) (1/78-12/88) |
| (F-55) - TRAILER HITCH ATTACHMENT, WHEN ORDERED | (440) - INTERNATIONAL HARVESTER CUSTOM RECTANGULAR BALER (1/70-12/78) |
| (A-59) - TRAILER HITCH ATTACHMENT | (445) - INTERNATIONAL HARVESTER RECTANGULAR BALER (NORTH AMERICA) (1/76-12/88) |
| (B-42) - SPRING CUSHION HITCH | (100) - INTERNATIONAL HARVESTER PRESS DRILL (1/67-12/69) |
| (A-21) - GAUGE WHEEL | (11) - INTERNATIONAL HARVESTER RIGID SHANK SUBSOIL CHISEL (1/76-12/78) |
| (B-06[A]) - 7 FOOT AND 11 FOOT TWO RANK, 7 FOOT AND 13 FOOT THREE RANK MODEL WITH END FRAME MOUNTING | (55) - INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (9-10) - BEAM AND SHANK WITH GAUGE WHEELS | (146) - CASE IH HIGH CLEARANCE CULTIVATOR (1/86-12/91) |
| (AR-05) - BEAM AND SHANK WITH GAUGE WHEELS | (146) - INTERNATIONAL HARVESTER CULTIVATOR (1/70-12/88) |
| (AP-17) - TOOLING EQUIPMENT, VIBRA SHANK TOOLING, 1970 TO 1976, FOR UNITS F, G, M, N, R, S, T AND V | (153) - INTERNATIONAL HARVESTER REAR-MOUNT CULTIVATOR (1/68-12/69) |
| (AT-17) - BED RIPPER SHANK | (353) - INTERNATIONAL HARVESTER 6-ROW CULTIVATOR (1/68-12/70) |
| (E-4) - BEAM AND SHANK WITH GAUGE WHEELS | (46) - INTERNATIONAL HARVESTER 4 & 6-ROW HIGH CLEARANCE CULTIVATOR (1/67-12/70) |
| (AE-2) - FRONT AND REAR FRAMES AND REAR | (132) - INTERNATIONAL HARVESTER DISK HARROW (1/68-12/75) |
| (AE-6) - SCRAPERS AND SCRAPER ANGLES | (132) - INTERNATIONAL HARVESTER DISK HARROW (1/68-12/75) |
| (N-04) - HITCH | (330) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/75) |
| (N-06) - FRONT AND REAR GANG BARS | (330) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/75) |
| (P-05) - HITCH | (470) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/75) |
| (S-05) - HITCH | (480) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/86) |
| (Q-03) - HITCH, 1965 TO 1969 | (500) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/88) |
| (AC-03) - HITCH | (610) - INTERNATIONAL HARVESTER OFFSET DISH HARROW (1/69-12/73) |
| (75.200.15) - SHANK ASSEMBLY | (690) - CONSER-TILL (6/06-) |
| (07-18) - SLIDE ADJUSTING GAUGE WHEEL MOUNTING | (55) - MCCORMICK-INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (A-21) - GAUGE WHEEL | (6 FARM) - HEAVY DUTY SUBSOILER (1/59-12/69) |
| (A-07) - HITCH, NON-FOLDING, UNITS A, B AND C | (315) - INTERNATIONAL HARVESTER PACKER-MULCHER (1/69-12/79) |
| (09-10) - STUB EXTENSION WING - USED ON 26 FOOT 3 INCH, THROUGH 35 FOOT 3 INCH MACHINES | (4400) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-11) - STUB EXTENSION WING - USED ON 26 FOOT 3 INCH MACHINE | (4400) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-14) - HINGE ASSEMBLY - FLAT-FOLD FLOATING - 22 FOOT 11 INCH MACHINE | (4400) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-10) - STUB EXTENSION WING - USED ON 26 FOOT 3 INCH, THROUGH 35 FOOT 3 INCH MACHINES | (4450) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-11) - STUB EXTENSION WING - USED ON 26 FOOT 3 INCH MACHINE | (4450) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-14) - HINGE ASSEMBLY - FLAT-FOLD FLOATING - 22 FOOT 11 INCH MACHINE | (4450) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (AD-07) - COLTER SHANK AND CLAMPS | (641) - INTERNATIONAL HARVESTER 2-WAY 4-FURROW MOLDBOARD PLOW (1/63-12/64) |
| (B-04) - HITCH | (6500) - INTERNATIONAL HARVESTER CONSER-TILL PLOW (1/87-12/97) |
| (9-26) - FRONT FURROW WHEEL AND LEVELING SCREW, 1975 AND AFTER | (770) - CASE IH MOLDBOARD PLOW (1/91-12/92) |
| (75.200.15) - SHANK ASSEMBLY | (MRX690) - CASE IH MULCH-TILL RIPPER (9/01-12/08) |
| (A-08) - MAIN FRAME ROCKSHAFT AND DEPTH CONTROL MACHINES WITH AXLE PIVOT THRU AXLE TUBE | (4700) - INTERNATIONAL HARVESTER VIBRA TILLER (1/82-12/87) |
| (9C-90) - ENGINE RAILS, COMBINES WITH D-414 ENGINES AND SERIAL NUMBERS PRIOR TO 18001 | (D-414) - 6 CYLINDER DIESEL ENGINE (1/68-12/81) |
| (9C-90) - ENGINE RAILS, COMBINES WITH D-414 ENGINES AND SERIAL NUMBERS PRIOR TO 18001 | (DT-414) - 6 CYLINDER TURBO DIESEL ENGINE (1/69-12/81) |
| (9-02) - FRAME, RADIATOR SUPPORT AND ENGINE MOUNTS | (6591T) - CASE IH IRRIGATION POWER UNIT (1/98-12/99) |
| (9-02) - FRAME, RADIATOR SUPPORT AND ENGINE MOUNTS | (6591TA) - CASE IH IRRIGATION POWER UNIT (1/98-12/99) |
| (132) - FRAME AND ENGINE MOUNTS | (4390) - CASE POWER UNIT (1/91-12/95) |
| (132) - FRAME AND ENGINE MOUNTS | (4390T) - CASE POWER UNIT (1/95-12/95) |
| (148) - FRAME AND ENGINE MOUNTS | (6590) - CASE DIESEL POWER UNIT (1/90-12/95) |
| (148) - FRAME AND ENGINE MOUNTS | (6590T) - CASE DIESEL POWER UNIT (1/90-12/95) |
| (148) - FRAME AND ENGINE MOUNTS | (6590TA) - CASE DIESEL POWER UNIT (1/90-12/95) |
| (N-02) - PLATFORM & MOUNTING PARTS | (HR-1) - INTERNATIONAL HARVESTER ROTARY CUTTER (1/67-12/71) |
| (N-02) - PLATFORM & MOUNTING PARTS | (HR504) - INTERNATIONAL HARVESTER ROTARY CUTTER (1/67-12/71) |
| (A-25) - SINGLE OVERSHOT AUGER HEADER, CONDITIONER ROLL TENSION | (SINGLE) - OVERSHOT AUGER HEADER FOR WINDROWERS (1/67-12/90) |
| (B-05) - SUBFRAME AND SUPPORT 420 BLADE | (420) - INTERNATIONAL HARVESTER BLADE (1/63-12/88) |
| (B-09) - SUBFRAME AND SUPPORTS 430 BLADE | (430) - INTERNATIONAL HARVESTER BLADE (1/63-12/88) |
| (6-06) - KNOTTER DRIVE AND CAM ASSEMBLY, 700123341 KNOTTER ASSEMBLY COMPLETE, INCLUDES PAGES 6-6 THRU 6-13 | (8575) - CASE IH MID-SIZE RECTANGULAR BALER (EUROPE) (1/95-12/00) |
| (06-008) - KNOTTER DRIVE & CAM ASSY., 700123341 KNOTTER DRIVE & CAM ASSY. COMPLETE, S.N. CFH0113001-CFH0117286 | (8575) - CASE IH MID-SIZE RECTANGULAR BALER (NORTH AMERICA) (1/95-12/00) |
| (06-012) - KNOTTER DRIVE & CAM ASSEMBLY, 700134466 KNOTTER DRIVE & CAM ASSY. COMPLETE, S.N. CFH0117287 & LATER | (8575) - CASE IH MID-SIZE RECTANGULAR BALER (NORTH AMERICA) (1/95-12/00) |
| (02-02) - HITCH AND JACK ASSEMBLY | (8580) - CASE IH LARGE RECTANGULAR BALER (1/88-12/98) |
| (06-10) - DRIVE AND CAM ASSEMBLY, PRODUCTION KNOTTER | (8580) - CASE IH LARGE RECTANGULAR BALER (1/88-12/98) |
| (06-12) - DRIVE AND CAM ASSEMBLY, REPLACEMENT KNOTTER | (8580) - CASE IH LARGE RECTANGULAR BALER (1/88-12/98) |
| (2-02) - TONGUE, HITCH, JACK AND SAFETY CHAIN ASSEMBLIES | (8585) - CASE IH LARGE (3 X 4) RECTANGLER BALER (1/98-12/00) |
| (6-14) - DRIVE AND CAM ASSEMBLY | (8585) - CASE IH LARGE (3 X 4) RECTANGLER BALER (1/98-12/00) |
| (02-02) - HITCH AND JACK ASSEMBLY | (8590) - CASE IH LARGE (4 X 4) RECTANGULAR BALER (NORTH AMERICA) (1/98-12/00) |
| (06-10) - DRIVE AND CAM ASSEMBLY | (8590) - CASE IH LARGE (4 X 4) RECTANGULAR BALER (NORTH AMERICA) (1/98-12/00) |
| (2-02) - HITCH AND JACK ASSEMBLY | (8590) - CASE IH LARGE RECTANGULAR BALER (EUROPE) (1/97-12/98) |
| (6-08) - DRIVE AND CAM ASSEMBLY , CENTRALIZED LUBE | (8590) - CASE IH LARGE RECTANGULAR BALER (EUROPE) (1/97-12/98) |
| (75.200.06) - HCS SHANK ASSEMBLY 2007 MODELS AND AFTER | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - MOUNTED (8/07-) |
| (75.200.06) - HCS SHANK ASSEMBLY 2007 MODEL YEAR AND AFTER | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/09) |
| (75.200.02) - HCS SHANK ASSEMBLY 2009 AND PRIOR MODELS | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - MOUNTED (8/07-12/09) |
| (75.200.03) - HCS SHANK ASSEMBLY 2007 MODELS AND AFTER | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/12) |
| (75.200.06) - HCS SHANK ASSEMBLY 2007 MODELS AND AFTER | (3250) - DMI NUTRI-PLACR (1/92-12/07) |
| (75.200.06) - HCS SHANK ASSEMBLY 2007 MODEL YEAR AND AFTER | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (75.200.06) - HCS SHANK ASSEMBLY 2007 MODEL YEAR AND AFTER | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (75.200.03) - HCS SHANKS (2007 AND AFTER) | (5310) - DMI NUTRI-TILL'R (6/06-12/09) |
| (75.200.02) - HCS SHANK ASSEMBLY | (5310) - DMI NUTRI-TILL'R - 6 & 8 ROW (1/00-12/09) |
| (75.200.02) - HCS SHANK ASSEMBLY 2009 AND PRIOR MODELS | (5310) - NUTRI-TILLER - MOUNTED (1/02-12/12) |
| (75.200.03) - HCS SHANK ASSEMBLY 2007 MODELS AND AFTER | (5310) - NUTRI-TILLER - PULL TYPE (1/02-12/12) |
| (9-010) - SINGLE DRILL HITCH | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (9-294) - COU-TILL ATTACHMENT, CYCLO AIR & PLATE TRAILING, ALL ROW SIZES | (900) - CASE IH PLANTER (1/87-12/95) |
| (75.200.03) - PARABOLIC SHANK | (1300) - DMI ECOLO-CHAMP COLTER CHISEL (1/85-12/92) |
| (75.200.01[01]) - SHANKS | (2500) - CASE IH RIP-STRIP (2/04-4/12) |
| (75.200.03) - SHANKS 2007 AND PRIOR MODELS - ECOLO-TIL 2500 | (2500) - CASE IH RIP-STRIP (2/04-4/12) |
| (75.200.04) - NO-TILL SHANK 2008 AND AFTER UNITS | (2500) - CASE IH RIP-STRIP (2/04-4/12) |
| (75.200.05) - PARABOLIC SHANK | (2500) - CASE IH RIP-STRIP (2/04-4/12) |
| (75.200.06) - MRD SHANK 2008 AND AFTER UNITS | (2500) - CASE IH RIP-STRIP (2/04-4/12) |
| (75.200.01[01]) - SHANKS | (2500 ECOLO-TIL) - CASE IH INLINE RIPPER (2/04-) |
| (75.200.03) - SHANKS 2007 AND PRIOR MODELS - ECOLO-TIL 2500 | (2500 ECOLO-TIL) - CASE IH INLINE RIPPER (2/04-) |
| (75.200.04) - NO-TILL SHANK 2008 AND AFTER UNITS | (2500 ECOLO-TIL) - CASE IH INLINE RIPPER (2/04-) |
| (75.200.05) - PARABOLIC SHANK | (2500 ECOLO-TIL) - CASE IH INLINE RIPPER (2/04-) |
| (75.200.06) - MRD SHANK 2008 AND AFTER UNITS | (2500 ECOLO-TIL) - CASE IH INLINE RIPPER (2/04-) |
| (75.200.03) - SHANKS 2007 AND PRIOR MODELS | (2500 ECOLO-TIL) - DMI IN LINE RIPPER (2/04-12/07) |
| (75.200.04) - NO-TILL SHANK 2008 AND AFTER UNITS | (2500 ECOLO-TIL) - DMI IN LINE RIPPER (2/04-12/07) |
| (75.200.05) - PARABOLIC SHANK | (2500 ECOLO-TIL) - DMI IN LINE RIPPER (2/04-12/07) |
| (75.200.06) - MRD SHANK 2008 AND AFTER UNITS | (2500 ECOLO-TIL) - DMI IN LINE RIPPER (2/04-12/07) |
| (75.200.02) - SHANKS | (527) - DMI ECOLO-TIGER (1/90-12/96) |
| (75.200.02) - SHANKS | (527B) - CASE IH ECOLO-TIGER MULCH CHISEL (1/86-12/08) |
| (75.200.02) - SHANKS | (527B) - DMI ECOLO-TIGER (1/97-12/08) |
| (9-102) - WING LIFT HINGES - FRONT, LEVEL LIFT MODELS, FLAT FOLD, 17 FOOT THROUGH 21 FOOT WIDE | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-104) - WING LIFT HINGES - REAR, LEVEL LIFT MODELS, FLAT FOLD, 17 FOOT THROUGH 21 FOOT WIDE | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-106) - WING LIFT INGES - FRONT, LEVEL LIFT MODELS, FLAT FOLD, 23 FOOT THROUGH 27 FOOT WIDE | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-108) - WING LIFT HINGES - REAR, LEVEL LIFT MODELS, FLAT FOLD, 23 FOOT THROUGH 27 FOOT WIDE | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-114) - SECONDARY WING LIFT HINGES - FRONT, LEVEL LIFT MODELS, DOUBLE FOLD, 41 FOOT WIDE | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-116) - SECONDARY WING LIFT HINGES - REAR, LEVEL LIFT MODELS, DOUBLE FOLD, 41 FOOT WIDE | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-118) - SECONDARY WING LIFT HINGES - FRONT, LEVEL LIFT MODELS, DOUBLE FOLD, 47 FOOT THROUGH 53 FOOT WIDE | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-120) - SECONDARY WING LIFT HINGES - REAR, LEVEL LIFT MODELS, DOUBLE FOLD, 47 FOOT THROUGH 53 FOOT WIDE | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-128) - GAUGE WHEEL MOUNTING - SLIDE ADJUSTING, MOUNTED FORWARD ON FRONT BEAM, ALL DIRECT MOUNTED MODELS | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-168) - LEVEL LIFT TRACTOR HITCH, BRACES AND BEAMS, LEVEL LIFT MODELS, FLAT FOLD | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-102) - WING LIFT HINGES - FRONT, LEVEL LIFT MODELS, FLAT FOLD, 17 FOOT THROUGH 21 FOOT WIDE | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-104) - WING LIFT HINGES - REAR, LEVEL LIFT MODELS, FLAT FOLD, 17 FOOT THROUGH 21 FOOT WIDE | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-106) - WING LIFT INGES - FRONT, LEVEL LIFT MODELS, FLAT FOLD, 23 FOOT THROUGH 27 FOOT WIDE | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-108) - WING LIFT HINGES - REAR, LEVEL LIFT MODELS, FLAT FOLD, 23 FOOT THROUGH 27 FOOT WIDE | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-114) - SECONDARY WING LIFT HINGES - FRONT, LEVEL LIFT MODELS, DOUBLE FOLD, 41 FOOT WIDE | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-116) - SECONDARY WING LIFT HINGES - REAR, LEVEL LIFT MODELS, DOUBLE FOLD, 41 FOOT WIDE | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-118) - SECONDARY WING LIFT HINGES - FRONT, LEVEL LIFT MODELS, DOUBLE FOLD, 47 FOOT THROUGH 53 FOOT WIDE | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-120) - SECONDARY WING LIFT HINGES - REAR, LEVEL LIFT MODELS, DOUBLE FOLD, 47 FOOT THROUGH 53 FOOT WIDE | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-128) - GAUGE WHEEL MOUNTING - SLIDE ADJUSTING, MOUNTED FORWARD ON FRONT BEAM, ALL DIRECT MOUNTED MODELS | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-168) - LEVEL LIFT TRACTOR HITCH, BRACES AND BEAMS, LEVEL LIFT MODELS, FLAT FOLD | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-32) - FRONT WING LIFT HINGE, FLAT FOLD - RIGID, 19 FOOT THROUGH 23 | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (9-34) - REAR WING LIFT HINGE AND CYLINDER MOUNTING, FLAT FOLD - | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (9-36) - FRONT WING LIFT HINGE, FLAT FOLD - FLOATING, 25 FOOT AND 27 | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (9-38) - REAR WING LIFT HINGE AND CYLINDER MOUNTING, FLAT FOLD - | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (9-46) - FRONT SECONDARY WING LIFT HINGE, DOUBLE FOLD - RIGID, 43 | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (9-48) - REAR SECONDARY WING LIFT HINGE, AND CYLINDER MOUNTING | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (9-50) - FRONT AND REAR SECONDARY WING LIFT HINGES, AND CYLINDER | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (9-70) - CASTER WHEEL MOUNTING, 12 FOOT WING VERTICAL FOLD, 6 FOOT | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (9-78) - LEVEL LIFT HITCH, BRACES AND BEAMS, FLAT FOLD | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (09-32) - FRONT WING LIFT HINGE, FLAT FOLD, RIGID, 19 FOOT THROUGH 23 FOOT WIDE | (5850) - CASE IH CHISEL PLOW (1/96-12/00) |
| (09-34) - REAR WING LIFT HINGE AND CYLINDER MOUNTING, FLAT FOLD, RIGID, 19 FOOT THROUGH 23 FOOT WIDE | (5850) - CASE IH CHISEL PLOW (1/96-12/00) |
| (09-36) - FRONT WING LIFT HINGE, FLAT FOLD, FLOATING, 25 FOOT AND 27 FOOT WIDE | (5850) - CASE IH CHISEL PLOW (1/96-12/00) |
| (09-38) - REAR WING LIFT HINGE AND CYLINDER MOUNTING, FLAT FOLD, FLOATING, 25 FOOT AND 27 FOOT WIDE | (5850) - CASE IH CHISEL PLOW (1/96-12/00) |
| (09-46) - FRONT SECONDARY WING LIFT HINGE, DOUBLE FOLD, RIGID, 43 FOOT AND 45 FOOT WIDE | (5850) - CASE IH CHISEL PLOW (1/96-12/00) |
| (09-48) - REAR SECONDARY WING LIFT HINGE AND CYLINDER MOUNTING, DOUBLE FOLD, RIGID, 43 FOOT AND 45 FOOT WIDE | (5850) - CASE IH CHISEL PLOW (1/96-12/00) |
| (09-50) - FRONT AND REAR SECONDARY WING LIFT HINGES & CYLINDER MTG, DOUBLE FOLD, FLOATING, 49' THRU 53' WIDE | (5850) - CASE IH CHISEL PLOW (1/96-12/00) |
| (09-70) - CASTER WHEEL MOUNTING, 12 FOOT WING VERTICAL FOLD, 6 FOOT SECONDARY WING DOUBLE FOLD | (5850) - CASE IH CHISEL PLOW (1/96-12/00) |
| (09-78) - LEVEL LIFT HITCH, BRACES AND BEAMS, FLAT FOLD | (5850) - CASE IH CHISEL PLOW (1/96-12/00) |
| (75.200.05) - PARABOLIC SHANK | (6700) - CHISEL PLOW (1/00-12/06) |
| (75.200.05) - PARABOLIC SHANK | (6750) - CHISEL PLOW (1/00-12/06) |
| (009) - PARABOLIC SHANK - MODEL 6750 | (6750) - PARABOLIC CHISEL (1/00-12/06) |
| (75.200.03) - PARABOLIC SHANK | (900) - DMI ECOLO-CHAMP COLTER CHISEL (1/85-12/92) |
| (75.200.07) - AUTO-RESET SHANK - 1983 | (COULTER) - CHAMP II - DMI (1/82-12/90) |
| (75.200.01) - AUTOMATIC RESET SHANK ASSEMBLY | (TURBO-CHAMP) - - DMI (1/80-12/82) |
| (39.100.03) - DOUBLE FOLD MAIN FRAME AND TRUSSES 38-1/2 THROUGH 50-1/2 | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (39.100.05) - 54-1/2 THROUGH 60-1/2 DOUBLE FOLD MAIN FRAME AND TRUSSES | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (44.100.11) - PIVOT STABILIZING WHEEL 2008 AND AFTER UNITS | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (9-018) - 6 FOOT WING FRAME | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-034) - FRONT WING LIFT HINGE, FLAT FOLD, RIGID | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-036) - REAR WING LIFT HINGE AND CYLINDER MOUNTING, FLAT FOLD, RIGID | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-038) - FRONT WING LIFT HINGE, FLAT FOLD, FLOATING | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-040) - REAR WING LIFT HINGE AND CYLINDER MOUNTING, FLAT FOLD, FLOATING | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-054) - FRONT SECONDARY WING LIFT HINGE AND CYLINDER MOUNTING, LOW TRANSPORT, DOUBLE FOLD, RIGID | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-056) - REAR SECONDARY WING LIFT HINGE, LOW TRANSPORT, DOUBLE FOLD, RIGID | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-058) - FRONT SECONDARY WING LIFT HINGE, AND CYLINDER MOUNTING, LOW TRANSPORT, DOUBLE FOLD, FLOATING | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-060) - REAR SECONDARY WING LIFT HINGE, LOW TRANSPORT, DOUBLE FOLD, FLOATING | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-062) - FRONT SECONDARY WING LIFT HINGE, STANDARD TRANSPORT, DOUBLE FOLD, RIGID | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-064) - REAR SECONDARY WING LIFT HINGE AND CYLINDER MOUNTING, STANDARD TRANSPORT, DOUBLE FOLD, RIGID | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-066) - FRONT & REAR SECONDARY WING LIFT HINGES & CYLINDER MOUNTING, STD TRANSPORT, DOUBLE FOLD, FLOATING | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-086) - CASTER WHEEL MOUNTING | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (39.100.02) - DOUBLE FOLD MAIN FRAME AND TRUSSES 38-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.03) - DOUBLE FOLD MAIN FRAME AND TRUSSES 54-1/2 THROUGH 60-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.02) - DOUBLE FOLD MAIN FRAME AND TRUSSES 38-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.03) - DOUBLE FOLD MAIN FRAME AND TRUSSES 54-1/2 THROUGH 60-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.02) - DOUBLE FOLD MAIN FRAME AND TRUSSES 38-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.03) - DOUBLE FOLD MAIN FRAME AND TRUSSES 54-1/2 THROUGH 60-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.03) - DOUBLE FOLD MAIN FRAME AND TRUSSES 38-1/2 THROUGH 50-1/2 | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (39.100.05) - 54-1/2 THROUGH 60-1/2 DOUBLE FOLD MAIN FRAME AND TRUSSES | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (44.100.11) - PIVOT STABILIZING WHEEL 2008 AND AFTER UNITS | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (39.100.02) - DOUBLE FOLD MAIN FRAME AND TRUSSES 38-1/2 THROUGH 50-1/2 | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (39.100.03) - DOUBLE FOLD MAIN FRAME AND TRUSSES 54-1/2 THROUGH 60-1/2 | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (9-12) - HITCH | (350) - CASE IH DISK HARROW (1/74-12/91) |
| (39.100.02) - DOUBLE FOLD MAIN FRAME AND TRUSSES 38-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.03) - DOUBLE FOLD MAIN FRAME AND TRUSSES 54-1/2 THROUGH 60-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.02) - DOUBLE FOLD MAIN FRAME AND TRUSSES 38-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.03) - DOUBLE FOLD MAIN FRAME AND TRUSSES 54-1/2 THROUGH 60-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.02) - DOUBLE FOLD MAIN FRAME AND TRUSSES 38-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.03) - DOUBLE FOLD MAIN FRAME AND TRUSSES 54-1/2 THROUGH 60-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (09-06) - COULTER SHANKS AND CLAMPS, RIGID AND SPRING TRIP BEAM PLOWS | (145) - CASE IH MOLDBOARD PLOW (1/85-12/02) |
| (44.100.07) - GAUGE WHEEL PARTS 2008 AND AFTER UNITS | (340) - TRUE-TANDEM DISK HARROW (5/03-6/15) |
| (44.100.06) - GAUGE WHEEL PARTS 2008 AND AFTER UNITS | (370 TRUE-TANDEM) - 19'-37' DISK HARROW (1/09-12/15) |
| (44.100.07[01]) - GAUGE WHEEL PARTS 2009 AND AFTER UNITS 19 THROUGH 34 FOOT ONLY | (370 TRUE-TANDEM) - 19'-37' DISK HARROW (1/09-12/15) |
| (44.100.08[01]) - GAUGE WHEEL PARTS 2009 AND AFTER - 37 FOOT ONLY | (370 TRUE-TANDEM) - 19'-37' DISK HARROW (1/09-12/15) |
| (44.100.07) - GAUGE WHEEL PARTS 2008 AND AFTER UNITS | (RMX340) - TANDEM DISK (6/03-12/09) |
| (44.100.06) - GAUGE WHEEL PARTS 2008 AND AFTER UNITS | (RMX370) - TANDEM DISK (6/03-12/09) |
| (44.100.07[01]) - GAUGE WHEEL PARTS 2009 AND AFTER UNITS 19 THROUGH 34 FOOT ONLY | (RMX370) - TANDEM DISK (6/03-12/09) |
| (44.100.08[01]) - GAUGE WHEEL PARTS 2009 AND AFTER - 37 FOOT ONLY | (RMX370) - TANDEM DISK (6/03-12/09) |
| (44.100.05) - PIVOT STABILIZING WHEEL 2008 AND AFTER UNITS | (330 TRUE-TANDEM) - 22'-34' DISK HARROW (8/07-12/14) |
| (9-02) - FRAME, RADIATOR SUPPORT AND ENGINE MOUNTS | (4391) - CASE IH IRRIGATION POWER UNIT (1/99-12/99) |
| (9-02) - FRAME, RADIATOR SUPPORT AND ENGINE MOUNTS | (4391T) - CASE IH IRRIGATION POWER UNIT (1/99-12/99) |
| (9-02) - FRAME, RADIATOR SUPPORT AND ENGINE MOUNTS | (4391TA) - CASE IH IRRIGATION POWER UNIT (1/99-12/99) |
| (8-02) - TONGUE AND TONGUE HYDRAULIC ASSEMBLIES | (8750) - CASE IH PULL-TYPE FORAGE HARVESTER (1/93-12/00) |
| (9A-072) - TONGUE AND HITCH | (781) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/86) |
| (9A-072) - TONGUE AND HITCH | (881) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/92) |
| (33-10) - FEEDER, FEEDER JACKSHAFT DRIVE | (1420) - INTERNATIONAL HARVESTER COMBINE (NORTH AMERICA) (1/81-12/82) |
| (33-12) - FEEDER, FEEDER REVERSER, MACHINES WITH OUT ROCK TRAP | (1420) - INTERNATIONAL HARVESTER COMBINE (NORTH AMERICA) (1/81-12/82) |
| (12-09) - POWER, ENGINE RAILS | (1470) - INTERNATIONAL HARVESTER HILLSIDE COMBINE (1/80-12/87) |
| (12-15) - POWER, ENGINE RAILS, S/N 6289 AND ABOVE | (1440) - CASE IH AXIAL-FLOW COMBINE (NORTH AMERICA) (1/77-12/84) |
| (12-14) - POWER, ENGINE RAILS, S/N 6540 AND ABOVE | (1460) - CASE IH AXIAL-FLOW COMBINE (NORTH AMERICA) (1/77-12/84) |
| (33-15) - FEEDER, FEEDER REVERSER, MACHINES WITH OUT ROCK TRAP | (1460) - CASE IH AXIAL-FLOW COMBINE (NORTH AMERICA) (1/77-12/84) |
| (12-09) - POWER, ENGINE RAILS, SERIAL NO. 1500 AND BELOW | (1480) - CASE IH AXIAL-FLOW COMBINE (1/78-12/84) |
| (12-10) - POWER, ENGINE RAILS, SERIAL NO. 1501 AND ABOVE | (1480) - CASE IH AXIAL-FLOW COMBINE (1/78-12/84) |
| (9A-28) - FEEDER JACKSHAFT DRIVE | (1620) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0032630 & AFTER) (NORTH AMERICA) (1/90-12/92) |
| (9A-48) - FEEDER REVERSER, WITH ROCK TRAP | (1620) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0032630 & AFTER) (NORTH AMERICA) (1/90-12/92) |
| (9E-08) - GRAIN TANK UNLOADER BELT DRIVE | (1620) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0032630 & AFTER) (NORTH AMERICA) (1/90-12/92) |
| (9A-44) - FEEDER REVERSER, WITH ROCK TRAP | (1640) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0034705 & AFTER) (NORTH AMERICA) (1/86-12/92) |
| (9E-14) - GRAIN TANK UNLOADER BELT DRIVE, P.I.N. JJC0097103 AND AFTER | (1640) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0034705 & AFTER) (NORTH AMERICA) (1/86-12/92) |
| (76) - GRAIN TANK UNLOADER, BELT DRIVE | (1640) - COMBINE SUPPLEMENT (1/86-12/92) |
| (9A-42) - FEEDER REVERSER, WITH ROCK TRAP | (1644) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (9E-10) - GRAIN TANK UNLOADER, BELT DRIVE | (1644) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (2-52) - ENGINE RAILS AND SUPPORTS, DT466B ENGINE | (1660) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0038346) (NORTH AMERICA) (1/86-12/89) |
| (9A-42) - FEEDER REVERSER, WITH ROCK TRAP | (1660) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0038346) (NORTH AMERICA) (1/86-12/89) |
| (9E-12) - GRAIN TANK UNLOADER BELT DRIVE | (1660) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0038346) (NORTH AMERICA) (1/86-12/89) |
| (9A-42) - FEEDER REVERSER, WITH ROCK TRAP | (1660) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0038346 & AFTER) (NORTH AMERICA) (1/86-12/89) |
| (9E-14) - GRAIN TANK UNLOADER, BELT DRIVE, P.I.N. JJC0102897 & AFTER, AND MODELS WITH EXTENDED LENGTH CLEANING SYSTEM | (1660) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0038346 & AFTER) (NORTH AMERICA) (1/86-12/89) |
| (092) - GRAIN TANK UNLOADER, BELT DRIVE | (1660) - COMBINE SUPPLEMENT (S/N JJC0038346 & AFTER) (1/86-12/91) |
| (9A-42) - FEEDER REVERSER, WITH ROCK TRAP | (1666) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (9E-10) - GRAIN TANK UNLOADER, BELT DRIVE | (1666) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (2-50) - ENGINE RAILS AND SUPPORTS, DTI-466C DIESEL ENGINE | (1680) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0045689) (NORTH AMERICA) (1/86-7/89) |
| (9A-44) - FEEDER REVERSER, WITH ROCK TRAP | (1680) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0045689) (NORTH AMERICA) (1/86-7/89) |
| (9A-46) - FEEDER REVERSER, WITHOUT ROCK TRAP | (1680) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0045689) (NORTH AMERICA) (1/86-7/89) |
| (9A-42) - FEEDER REVERSER, WITH ROCK TRAP | (1680) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0045689 & AFTER) (NORTH AMERICA) (8/89-12/92) |
| (9E-12) - GRAIN TANK UNLOADER BELT DRIVE, PRIOR TO P.I.N. JJC0115352 | (1680) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0045689 & AFTER) (NORTH AMERICA) (8/89-12/92) |
| (9E-16) - GRAIN TANK UNLOADER BELT DRIVE, P.I.N. JJC0115352 AND AFTER | (1680) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0045689 & AFTER) (NORTH AMERICA) (8/89-12/92) |
| (120) - GRAIN TANK UNLOADER BELT DRIVE | (1680) - COMBINE SUPPLEMENT (1/86-12/88) |
| (9A-43) - FEEDER REVERSER, WITH ROCK TRAP | (1688) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (9E-12) - GRAIN TANK UNLOADER, BELT DRIVE | (1688) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (9A-46) - FEEDER REVERSER, WITH ROCK TRAP | (2144) - CASE IH AXIAL-FLOW COMBINE (1/95-12/97) |
| (9E-12) - GRAIN TANK UNLOADER, BELT DRIVE | (2144) - CASE IH AXIAL-FLOW COMBINE (1/95-12/97) |
| (9A-46) - FEEDER REVERSER, WITH ROCK TRAP | (2166) - CASE IH AXIAL-FLOW COMBINE (NA) (1/95-12/97) |
| (9A-44) - FEEDER REVERSER, WITH ROCK TRAP | (2188) - CASE IH AXIAL-FLOW COMBINE (NA) (1/95-12/97) |
| (9E-12) - GRAIN TANK UNLOADER, BELT DRIVE | (2188) - CASE IH AXIAL-FLOW COMBINE (NA) (1/95-12/97) |
| (09A-25) - FEEDER REVERSER, WITH ROCK TRAP - BSN JJC0174399 | (2344) - CASE IH AXIAL-FLOW COMBINE (1/98-1/02) |
| (09E-06) - UNLOADER, BELT DRIVE | (2344) - CASE IH AXIAL-FLOW COMBINE (1/98-1/02) |
| (09A-25) - FEEDER REVERSER, WITH ROCK TRAP - BSN JJC0253999 | (2366) - CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04) |
| (09E-06) - UNLOADER, BELT DRIVE | (2366) - CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04) |
| (09E-07) - UNLOADER, BELT DRIVE | (2377) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001&HAJ300000 (11/04-12/07) |
| (09A-25) - FEEDER REVERSER, WITH ROCK TRAP BSN JJC0268799 | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BSN JJC0276540 (10/97-12/04) |
| (09E-06) - UNLOADER, BELT DRIVE | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BSN JJC0276540 (10/97-12/04) |
| (09E-07) - UNLOADER, BELT DRIVE | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001 & HAJ300000 (1/98-12/07) |
| (09E-07) - UNLOADER, BELT DRIVE | (2388) - CASE IH AXIAL-FLOW COMBINE (RU) ASN HAJ300001 (10/06-12/07) |
| (80.175.03) - UNLOADER, BELT DRIVE | (2577) - AXIAL-FLOW COMBINE (NA) ASN HAJ0300001 (1/06-12/07) |
| (80.175.03) - UNLOADER, BELT DRIVE | (2588) - CASE IH AXIAL-FLOW COMBINE (NA) ASN HAJ300001 (10/06-12/06) |
| (80.175.AG[02]) - UNLOADER BELT DRIVE ASSY | (5130) - COMBINE - TIER 4 COMMON CAB (1/13-3/14) |
| (80.175.03[01]) - UNLOADER, BELT DRIVE, 2.5 BU/SEC- 5130 | (5130) - COMBINE TIER 4 (1/12-1/13) |
| (80.175.AG[02]) - UNLOADER BELT DRIVE ASSY (CONT.) | (5140) - COMBINE - TIER 4B (NA) (3/14-10/15) |
| (9E-12) - GRAIN TANK UNLOADER BELT DRIVE | (1670) - CASE IH HILLSIDE COMBINE (S/N JJC0080540 & AFTER) (8/90-12/91) |
| (14-02) - SUSPENSION, GUIDE WHEEL AXLE, SUPPORT AND TIE ROD, ADJUSTABLE AXLE | (715) - INTERNATIONAL HARVESTER COMBINE (PRIOR TO S/N 23001) (1/71-12/79) |
| (12-12) - POWER, CRANKCASE OIL PAN, GASKET, OIL DRAIN AND ENGINE MOUNTINGS, DIESEL ENGINES | (815) - INTERNATIONAL HARVESTER COMBINE (S/N 8001 & AFTER) (1/74-12/78) |
| (12-11) - POWER, CRANKCASE OIL PAN, GASKET, OIL DRAIN AND ENGINE MOUNTINGS, DIESEL ENGINES | (915) - INTERNATIONAL HARVESTER COMBINE (S/N 8001 & AFTER) (1/78-12/78) |
| (2-50) - ENGINE SUPPORTS | (2055) - CASE IH COTTON EXPRESS COTTON PICKER (1/90-12/93) |
| (9A-26) - CROSS AUGER DRIVE | (1400) - INTERNATIONAL HARVESTER COTTON HARVESTER (1/79-12/86) |
| (9A-26) - DRUM ROTOR AND DRIVE CAMS | (2022) - CASE IH COTTON PICKER (1/88-12/94) |
| (9A-26) - DRUM ROTOR AND DRIVE CAMS | (2044) - CASE IH COTTON PICKER (1/91-12/94) |
| (Q-05) - BASKET AND AIR SYSTEM, BASKET SUPPORTS | (616) - INTERNATIONAL HARVESTER COTTON PICKER (1/80-12/88) |
| (Q-05) - BASKET AND AIR SYSTEM, BASKET SUPPORTS | (622) - INTERNATIONAL HARVESTER COTTON PICKER (1/80-12/88) |
| (2-22) - SWAYBAR ASSEMBLY, LEFT | (425) - SHIFTABLE DRAPER GRAIN HEADER (1/99-12/01) |
| (2-24) - SWAYBAR ASSEMBLY, RIGHT | (425) - SHIFTABLE DRAPER GRAIN HEADER (1/99-12/01) |
| (2-12) - SWAYBAR MOUNTING ASSEMBLY, LEFT | (8820) - DRAPER HEADER (15, 18 & 21 FT.) (12/91-12/99) |
| (2-14) - SWAYBAR MOUNTING ASSEMBLY, RIGHT | (8820) - DRAPER HEADER (15, 18 & 21 FT.) (12/91-12/99) |
| (2-12) - SWAYBAR MOUNTING ASSEMBLY, LEFT | (8830) - DRAPER HEADER (15, 18 & 21 FT.) S/N CFH0030159 & AFTER (4/91-12/99) |
| (2-14) - SWAYBAR MOUNTING ASSEMBLY, RIGHT | (8830) - DRAPER HEADER (15, 18 & 21 FT.) S/N CFH0030159 & AFTER (4/91-12/99) |
| (2-12) - SWAYBAR MOUNTING ASSEMBLY, LEFT | (8840) - DRAPER HEADER (15, 18 & 21 FT.) (1/88-12/99) |
| (2-14) - SWAYBAR MOUNTING ASSEMBLY, RIGHT | (8840) - DRAPER HEADER (15, 18 & 21 FT.) (1/88-12/99) |
| (9D-10) - MAIN FRAME SUPPORTS | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9D-10) - MAIN FRAME SUPPORTS | (1020) - GRAIN HEADER (S/N JJC0215001 TO JJC0227000) (12/94-12/02) |
| (2-18) - SWAYBAR ASSEMBLY (LEFT) | (325) - MULTI-CROP HEADER (1/98-12/01) |
| (2-20) - SWAYBAR ASSEMBLY (RIGHT) | (325) - MULTI-CROP HEADER (1/98-12/01) |
| (05-008) - PANEL ASSEMBLY - HAY CONDITIONER (LEFT) | (525) - AUGER HEADER (12 FT.) (1/94-12/00) |
| (05-010) - PANEL ASSEMBLY - HAY CONDITIONER (RIGHT) | (525) - AUGER HEADER (12 FT.) (1/94-12/00) |
| (05-008) - PANEL ASSEMBLY - HAY CONDITIONER (LEFT) | (525) - AUGER HEADER (14 FT.) (1/94-12/00) |
| (05-010) - PANEL ASSEMBLY - HAY CONDITIONER (RIGHT) | (525) - AUGER HEADER (14 FT.) (1/94-12/00) |
| (5-06) - PANEL ASSEMBLY, HAY CONDITIONER, LEFT | (625) - AUGER HEADER (14 FT.) (1/94-12/99) |
| (5-08) - PANEL ASSEMBLY, HAY CONDITIONER, RIGHT | (625) - AUGER HEADER (14 FT.) (1/94-12/99) |
| (5-06) - PANEL ASSEMBLY, HAY CONDITIONER, LEFT | (625) - AUGER HEADER (16 FT.) (1/94-12/99) |
| (5-08) - PANEL ASSEMBLY, HAY CONDITIONER, RIGHT | (625) - AUGER HEADER (16 FT.) (1/94-12/99) |
| (5-06) - PANEL ASSEMBLY, HAY CONDITIONER, LEFT | (625) - AUGER HEADER (18 FT.) (1/94-12/99) |
| (5-08) - PANEL ASSEMBLY, HAY CONDITIONER, RIGHT | (625) - AUGER HEADER (18 FT.) (1/94-12/99) |
| (5-06) - PANEL ASSEMBLY - HAY CONDITIONER (LEFT) | (SC412) - CASE IH CENTER PIVOT MOWER CONDITIONER (1/99-12/00) |
| (5-08) - PANEL ASSEMBLY - HAY CONDITIONER (RIGHT) | (SC412) - CASE IH CENTER PIVOT MOWER CONDITIONER (1/99-12/00) |
| (5-06) - PANEL ASSEMBLY - HAY CONDITIONER (LEFT) | (SC414) - CASE IH CENTER PIVOT MOWER CONDITIONER (1/99-12/00) |
| (5-08) - PANEL ASSEMBLY - HAY CONDITIONER (RIGHT) | (SC414) - CASE IH CENTER PIVOT MOWER CONDITIONER (1/99-12/00) |
| (5-04) - PANEL ASSEMBLY, HAY CONDITIONER, LEFT | (SC414) - CASE IH DELUXE CENTER PIVOT MOWER CONDITIONER (1/99-12/00) |
| (5-06) - PANEL ASSEMBLY, HAY CONDITIONER, RIGHT | (SC414) - CASE IH DELUXE CENTER PIVOT MOWER CONDITIONER (1/99-12/00) |
| (5-04) - PANEL ASSEMBLY, HAY CONDITIONER, LEFT | (SC416) - CASE IH DELUXE CENTER PIVOT MOWER CONDITIONER (5/99-12/00) |
| (5-06) - PANEL ASSEMBLY, HAY CONDITIONER, RIGHT | (SC416) - CASE IH DELUXE CENTER PIVOT MOWER CONDITIONER (5/99-12/00) |
| (07-04) - CAB FRAME ASSEMBLY | (8825) - CASE IH SELF-PROPELLED WINDROWER TRACTOR (1/98-12/00) |
| (07-04) - CAB FRAME ASSEMBLY | (8825HP) - CASE IH SELF-PROPELLED WINDROWER TRACTOR (1/98-12/00) |
| (07-002) - CAB FRAME ASSEMBLY | (8840) - CASE IH SELF-PROPELLED WINDROWER TRACTOR (1/88-12/99) |
| (07-02) - CAB FRAME ASSEMBLY | (8850) - CASE IH SELF-PROPELLED ROTARY WINDROWER TRACTOR (1/88-12/99) |
| (H-20) - CONTROLS, PLATFORM DRIVE CONTROL | (275) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (H-20) - CONTROLS, PLATFORM DRIVE CONTROL | (375) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (06-008) - KNOTTER DRIVE & CAM ASSY., 700123341 KNOTTER DRIVE & CAM ASSY. COMPLETE, S.N. CFH0113001-CFH0117286 | (8576) - CASE IH BALER AND ACCUMULATOR (1/98-12/00) |
| (06-012) - KNOTTER DRIVE & CAM ASSEMBLY, 700134466 KNOTTER DRIVE & CAM ASSY. COMPLETE, S.N. CFH0117287 & LATER | (8576) - CASE IH BALER AND ACCUMULATOR (1/98-12/00) |
| (9-034) - FENDERS, FRAME PLATFORMS AND ROPS ATTACHMENT, 1210, 1210 FOUR-WHEEL DRIVE AND 1212 TRACTORS | (1210) - DAVID BROWN DIESEL TRACTOR (S/N 11150001 & AFTER) (1/76-1/80) |
| (9-080) - CAB FLOOR AND MOUNTING, 1210Q, 1210Q FOUR-WHEEL DRIVE AND 1212Q TRACTORS FOR EUROPE ONLY | (1210) - DAVID BROWN DIESEL TRACTOR (S/N 11150001 & AFTER) (1/76-1/80) |
| (9-084) - CAB FLOOR AND MOUNTING, SEKURA CAB, TRACTORS FOR EUROPE ONLY | (1210) - DAVID BROWN DIESEL TRACTOR (S/N 11150001 & AFTER) (1/76-1/80) |
| (9-034) - FENDERS, FRAME PLATFORMS AND ROPS ATTACHMENT, 1210, 1210 FOUR-WHEEL DRIVE AND 1212 TRACTORS | (1212) - DAVID BROWN DIESEL TRACTOR (S/N 11150001 & AFTER) (1/76-12/80) |
| (9-084) - CAB FLOOR AND MOUNTING, SEKURA CAB, TRACTORS FOR EUROPE ONLY | (1212) - DAVID BROWN DIESEL TRACTOR (S/N 11150001 & AFTER) (1/76-12/80) |
| (9-48) - CAB FLOOR AND MOUNTINGS, 885Q, 885QH AND 885SK TRACTORS | (885) - DAVID BROWN DIESEL TRACTOR W/Q CAB (S/N 11000001 TO 11021851) (1/76-12/83) |
| (9-48) - CAB FLOOR AND MOUNTINGS, 885Q, 885QH AND 885SK TRACTORS | (885N) - DAVID BROWN DIESEL TRACTOR W/Q CAB (S/N 11000001 TO 11021851) (1/76-12/83) |
| (13-15) - SUPERSTRUCTURE, TRACTOR CAB AND CONNECTIONS | (1456) - FARMALL DIESEL TRACTOR (1/69-12/74) |
| (J-21) - STEERING MECHANISM, ADJUSTABLE WIDE TREAD FRONT AXLE, INTERNATIONAL TRACTORS | (544) - FARMALL TRACTOR (1/68-12/73) |
| (F-37) - HYDRAULICS SYSTEM, DRAFT SENSING | (544) - FARMALL TRACTOR (1/68-12/73) |
| (N-10) - PARTS ACCESSORIES AND ATTACHMENTS, TRACTOR CAB AND CONNECTIONS, EXCEL CABS | (756) - FARMALL TRACTOR (1/67-12/71) |
| (F-34) - HYDRAULICS SYSTEM, DRAFT SENSING | (756) - FARMALL TRACTOR (1/67-12/71) |
| (F-14) - HYDRAULIC SYSTEM, DRAFT CONTROL | (806) - FARMALL TRACTOR (1/63-12/76) |
| (13-16) - SUPERSTRUCTURE, TRACTOR CAB AND CONNECTIONS | (826) - FARMALL TRACTOR (1/69-12/71) |
| (10-26) - HYDRAULICS, DRAFT CONTROL, FARMALL TRACTORS W/ S/N 13354 & BELOW, INT'L TRACTORS W/S/N 7664 & BELOW | (826) - FARMALL TRACTOR (1/69-12/71) |
| (10-37) - HYDRAULICS, DRAFT SENSING | (826) - FARMALL TRACTOR (1/69-12/71) |
| (13-43) - SUPERSTRUCTURE, CUSTOM TRACTOR CAB AND CONNECTIONS | (HYDRO 100) - INTERNATIONAL TRACTOR (1/71-12/76) |
| (10-46) - HYDRAULICS, CYLINDER STORAGE HOOK | (HYDRO 100) - INTERNATIONAL TRACTOR (1/71-12/76) |
| (10-29[A]) - HYDRAULIC, DRAFT SENSING | (HYDRO 186) - INTERNATIONAL DIESEL TRACTOR (1/76-12/78) |
| (09-11) - AUTOMATIC HITCH | (2400) - INTERNATIONAL SERIES-A TRACTOR (EUROPE) (1/71-12/73) |
| (09-18) - THREE POSITION DRAWBAR | (2400) - INTERNATIONAL SERIES-A TRACTOR (EUROPE) (1/71-12/73) |
| (09-014) - AUTOMATIC HITCH | (2500) - INTERNATIONAL SERIES-A TRACTOR (EUROPE) (1/71-12/77) |
| (09-020) - THREE POSITION DRAWBAR | (2500) - INTERNATIONAL SERIES-A TRACTOR (EUROPE) (1/71-12/77) |
| (09-11) - AUTOMATIC HITCH | (454) - INTERNATIONAL SERIES-A TRACTOR (EUROPE) (1/71-12/73) |
| (09-18) - THREE POSITION DRAWBAR | (454) - INTERNATIONAL SERIES-A TRACTOR (EUROPE) (1/71-12/73) |
| (09-014) - AUTOMATIC HITCH | (574) - INTERNATIONAL SERIES-A TRACTOR (EUROPE) (1/70-12/77) |
| (09-020) - THREE POSITION DRAWBAR | (574) - INTERNATIONAL SERIES-A TRACTOR (EUROPE) (1/70-12/77) |
| (B-33) - POWER TRAIN, FINAL DRIVE, COUNTERSHAFT AND CARRIER, TRACTORS WITH COTTON PICKER | (706) - INTERNATIONAL TRACTOR (1/63-12/67) |
| (8-40) - THREE POINT HITCH HYDRAULICS | (7110) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (10/87-12/93) |
| (8-40) - THREE POINT HITCH HYDRAULICS | (7120) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (10/87-12/93) |
| (8-040) - THREE POINT HITCH HYDRAULICS | (7130) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (10/87-12/93) |
| (8-040) - THREE POINT HITCH HYDRAULICS | (7140) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (10/87-12/93) |
| (8-040) - THREE POINT HITCH HYDRAULICS | (7150) - CASE IH MAGNUM TRACTOR (1/87-12/93) |
| (8-026) - THREE POINT HITCH HYDRAULICS | (7210) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (1/94-12/96) |
| (8-026) - THREE POINT HITCH HYDRAULICS | (7220) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (1/94-12/96) |
| (8-026) - THREE POINT HITCH HYDRAULICS | (7230) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (1/94-12/96) |
| (8-026) - THREE POINT HITCH HYDRAULICS | (7240) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (1/94-12/96) |
| (8-026) - THREE POINT HITCH HYDRAULICS | (7250) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (1/94-12/96) |
| (8-022) - THREE POINT HITCH HYDRAULICS | (8910) - CASE IH MAGNUM TRACTOR (1/97-12/98) |
| (8-022) - THREE POINT HITCH HYDRAULICS | (8920) - CASE IH MAGNUM TRACTOR (1/97-12/98) |
| (8-022) - THREE POINT HITCH HYDRAULICS | (8930) - CASE IH MAGNUM TRACTOR (1/97-12/98) |
| (8-022) - THREE POINT HITCH HYDRAULICS | (8940) - CASE IH MAGNUM TRACTOR (1/97-12/98) |
| (8-022) - THREE POINT HITCH HYDRAULICS | (8950) - CASE IH MAGNUM TRACTOR (1/97-12/98) |
| (13-16) - SUPERSTRUCTURE, TRACTOR CAB AND CONNECTIONS | (1026) - INTERNATIONAL DIESEL TRACTOR (1/70-12/88) |
| (04-02) - BRAKES, BRAKES AND CONNECTIONS | (1026) - INTERNATIONAL DIESEL TRACTOR (1/70-12/88) |
| (13-43) - SUPERSTRUCTURE, CUSTOM TRACTOR CAB AND CONNECTIONS | (1066) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/78) |
| (09-01) - FRAME, FRONT FRAME CHANNELS | (1086) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (H-12) - CONTROLS, BRAKES | (1256) - INTERNATIONAL DIESEL TRACTOR (1/67-12/73) |
| (13-15) - SUPERSTRUCTURE, TRACTOR CAB AND CONNECTIONS | (1456) - INTERNATIONAL DIESEL TRACTOR (1/69-12/74) |
| (13-43) - SUPERSTRUCTURE, CUSTOM TRACTOR CAB AND CONNECTIONS | (1466) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/77) |
| (13-43) - SUPERSTRUCTURE, CUSTOM TRACTOR CAB AND CONNECTIONS | (1468) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/76) |
| (09-01) - FRAME, FRONT FRAME CHANNELS | (1486) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (07-14) - DRIVE TRAIN, REAR DRIVE AXLE | (1566) - INTERNATIONAL DIESEL TRACTOR (1/73-12/78) |
| (09-02) - FRAME, FRONT CHANNELS | (1566) - INTERNATIONAL DIESEL TRACTOR (1/73-12/78) |
| (07-14) - DRIVE TRAIN, REAR DRIVE AXLE | (1568) - INTERNATIONAL DIESEL TRACTOR (1/74-12/78) |
| (09-02) - FRAME, FRONT CHANNELS | (1568) - INTERNATIONAL DIESEL TRACTOR (1/74-12/78) |
| (10-25) - HYDRAULIC, HYDRAULIC DRAFT CONTROL, 1586 TRACTOR WITH SERIAL NO. 2100 AND ABOVE | (1586) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (09-01) - FRAME, FRONT FRAME CHANNELS | (1586) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (13-16) - SUPERSTRUCTURE, TRACTOR CAB AND CONNECTIONS | (21026) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/69-12/88) |
| (04-02) - BRAKES, BRAKES AND CONNECTIONS | (21026) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/69-12/88) |
| (H-12) - CONTROLS, BRAKES | (21256) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/67-12/73) |
| (13-15) - SUPERSTRUCTURE, TRACTOR CAB AND CONNECTIONS | (21456) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/69-12/74) |
| (10-47) - HYDRAULICS, HYDRAULIC DRAFT CONTROL, 3088, 3288 AND 3688HC TRACTORS | (3088) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (09-01) - FRAME, FRONT FRAME CHANNELS | (3088) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (10-47) - HYDRAULICS, HYDRAULIC DRAFT CONTROL, 3088, 3288 AND 3688HC TRACTORS | (3288) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (09-01) - FRAME, FRONT FRAME CHANNELS | (3288) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (10-21) - HYDRAULICS, HYDRAULIC DRAFT CONTROL | (3388) - INTERNATIONAL ARTICULATED TRACTOR (1/79-12/81) |
| (6-10) - TRANSMISSION HOUSING | (3394) - CASE DIESEL TRACTOR (1/85-12/87) |
| (10-19) - HYDRAULICS, DRAFT SENSING, TRACTOR WITH CATEGORY II, THREE POINT HITCH | (3488) - INTERNATIONAL HYDROSTATIC TRACTOR (1/81-12/86) |
| (10-21) - HYDRAULICS, HYDRAULIC DRAFT CONTROL | (3588) - INTERNATIONAL ARTICULATED TRACTOR (1/78-12/81) |
| (6-010) - TRANSMISSION HOUSING | (3594) - CASE DIESEL TRACTOR (1/85-12/87) |
| (10-49) - HYDRAULICS, HYDRAULIC DRAFT CONTROL, 3688 TRACTORS | (3688) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (09-01) - FRAME, FRONT FRAME CHANNELS | (3688) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (10-47) - HYDRAULICS, HYDRAULIC DRAFT CONTROL, 3088, 3288 AND 3688HC TRACTORS | (3688HC) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (09-01) - FRAME, FRONT FRAME CHANNELS | (3688HC) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (10-21) - HYDRAULICS, HYDRAULIC DRAFT CONTROL | (3788) - INTERNATIONAL ARTICULATED TRACTOR (1/80-12/81) |
| (10-49) - HYDRAULICS, HYDRAULIC DRAFT CONTROL | (5088) - INTERNATIONAL DIESEL TRACTOR (1/81-12/87) |
| (10-49) - HYDRAULICS, HYDRAULIC DRAFT CONTROL | (5288) - INTERNATIONAL DIESEL TRACTOR (1/81-12/87) |
| (10-49) - HYDRAULICS, HYDRAULIC DRAFT CONTROL | (5488) - INTERNATIONAL DIESEL TRACTOR (1/81-12/87) |
| (13-43) - SUPERSTRUCTURE, CUSTOM TRACTOR CAB AND CONNECTIONS | (766) - INTERNATIONAL 66 SERIES TRACTOR (1/71-12/78) |
| (10-46) - HYDRAULICS, CYLINDER STORAGE HOOK | (766) - INTERNATIONAL 66 SERIES TRACTOR (1/71-12/78) |
| (09-01) - FRAME, FRONT FRAME CHANNELS | (786) - INTERNATIONAL DIESEL TRACTOR (1/80-12/80) |
| (09-01) - FRAME, FRONT FRAME CHANNELS | (886) - INTERNATIONAL DIESEL TRACTOR (1/76-12/80) |
| (13-43) - SUPERSTRUCTURE, CUSTOM TRACTOR CAB AND CONNECTIONS | (966) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/71) |
| (10-46) - HYDRAULICS, CYLINDER STORAGE HOOK | (966) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/71) |
| (09-01) - FRAME, FRONT FRAME CHANNELS | (986) - INTERNATIONAL DIESEL TRACTOR (1/76-12/79) |
| (4-14) - CHASSIS, FRONT AXLE | (2300) - INTERNATIONAL TRACTOR (1/71-12/74) |
| (9-794) - AUTOMATIC HITCH | (248) - CASE IH INDUSTRIAL TRACTOR (S/N 1591 & ON) (1/86-12/90) |
| (J-21) - STEERING MECHANISM, ADJUSTABLE WIDE TREAD FRONT AXLE, INTERNATIONAL TRACTORS | (2544) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/68-12/73) |
| (F-37) - HYDRAULICS SYSTEM, DRAFT SENSING | (2544) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/68-12/73) |
| (09-013) - AUTOMATIC HITCH, ATTACHMENT | (258) - INTERNATIONAL INDUSTRIAL TRACTOR (1/78-12/86) |
| (B-33) - POWER TRAIN, FINAL DRIVE, COUNTERSHAFT AND CARRIER, TRACTORS WITH COTTON PICKER | (2706) - INTERNATIONAL INDUSTRIAL TRACTOR (1/63-12/67) |
| (N-10) - PARTS ACCESSORIES AND ATTACHMENTS, TRACTOR CAB AND CONNECTIONS, EXCEL CABS | (2756) - INTERNATIONAL INDUSTRIAL TRACTOR (1/67-12/71) |
| (F-34) - HYDRAULICS SYSTEM, DRAFT SENSING | (2756) - INTERNATIONAL INDUSTRIAL TRACTOR (1/67-12/71) |
| (6-44) - WEIGHTS, REAR WHEEL | (276) - INTERNATIONAL TRACTOR (1/89-12/90) |
| (09-013) - AUTOMATIC HITCH | (278) - INTERNATIONAL TRACTOR (1/78-12/81) |
| (F-14) - HYDRAULIC SYSTEM, DRAFT CONTROL | (2806) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/63-12/76) |
| (13-16) - SUPERSTRUCTURE, TRACTOR CAB AND CONNECTIONS | (2826) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/69-12/71) |
| (10-26) - HYDRAULICS, DRAFT CONTROL, FARMALL TRACTORS W/ S/N 13354 & BELOW, INT'L TRACTORS W/S/N 7664 & BELOW | (2826) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/69-12/71) |
| (10-37) - HYDRAULICS, DRAFT SENSING | (2826) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/69-12/71) |
| (N-10) - PARTS ACCESSORIES AND ATTACHMENTS, TRACTOR CAB AND CONNECTIONS, EXCEL CABS | (2856) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/67-12/76) |
| (B-14) - POWER TRAIN, DIFFERENTIAL LOCK | (2856) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/67-12/76) |
| (F-16[A]) - HYDRAULICS SYSTEM, HYDRAULIC CYLINDER STORAGE HOOK | (2856) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/67-12/76) |
| (F-37) - HYDRAULICS SYSTEM, DRAFT SENSING | (2856) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/67-12/76) |
| (4-14) - CHASSIS, FRONT AXLE | (354) - INTERNATIONAL TRACTOR (1/72-12/74) |
| (4-09) - CHASSIS, FRONT AXLE | (364) - INTERNATIONAL TRACTOR (1/75-12/76) |
| (02-01) - MISCELLANEOUS, REAR WHEEL WEIGHTS | (384) - INTERNATIONAL TRACTOR (1/77-12/81) |
| (00J10) - AUTOMATIC HITCH | (385) - INTERNATIONAL DIESEL TRACTOR (EUROPE) (1/84-12/90) |
| (09-07) - AUTOMATIC HITCH | (474) - INTERNATIONAL DIESEL TRACTOR (1/73-12/74) |
| (09-11) - THREE POSITION DRAWBAR | (474) - INTERNATIONAL DIESEL TRACTOR (1/73-12/74) |
| (00J10) - AUTOMATIC HITCH | (484) - INTERNATIONAL DIESEL TRACTOR (EUROPE) (1/78-12/81) |
| (00J10) - AUTOMATIC HITCH | (485) - INTERNATIONAL DIESEL TRACTOR (1/81-12/85) |
| (J-21) - STEERING MECHANISM, ADJUSTABLE WIDE TREAD FRONT AXLE, INTERNATIONAL TRACTORS | (544) - INTERNATIONAL TRACTOR (1/68-12/73) |
| (F-37) - HYDRAULICS SYSTEM, DRAFT SENSING | (544) - INTERNATIONAL TRACTOR (1/68-12/73) |
| (09-013) - AUTOMATIC HITCH, ATTACHMENT | (584) - INTERNATIONAL DIESEL TRACTOR (EUROPE) (1/78-12/81) |
| (09-013) - AUTOMATIC HITCH, ATTACHMENT | (585) - INTERNATIONAL TRACTOR (1/81-12/85) |
| (09-11) - AUTOMATIC HITCH | (674) - INTERNATIONAL DIESEL TRACTOR (EUROPE) (1/73-12/77) |
| (09-17) - THREE POSITION DRAWBAR | (674) - INTERNATIONAL DIESEL TRACTOR (EUROPE) (1/73-12/77) |
| (9-806) - AUTOMATIC HITCH, 685 : -13595 885 : -3401 | (685) - CASE IH DIESEL TRACTOR (1/86-12/90) |
| (9-814) - AUTOMATIC HITCH, 685 : 18001-, 885 : 18001- | (685) - CASE IH DIESEL TRACTOR (1/86-12/90) |
| (N-10) - PARTS ACCESSORIES AND ATTACHMENTS, TRACTOR CAB AND CONNECTIONS, EXCEL CABS | (756) - INTERNATIONAL TRACTOR (1/67-12/71) |
| (F-34) - HYDRAULICS SYSTEM, DRAFT SENSING | (756) - INTERNATIONAL TRACTOR (1/67-12/71) |
| (09-013) - AUTOMATIC HITCH | (784) - INTERNATIONAL DIESEL TRACTOR (EUROPE) (1/78-12/81) |
| (09-013) - AUTOMATIC HITCH | (785) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (F-14) - HYDRAULIC SYSTEM, DRAFT CONTROL | (806) - INTERNATIONAL TRACTOR (1/63-12/76) |
| (13-16) - SUPERSTRUCTURE, TRACTOR CAB AND CONNECTIONS | (826) - INTERNATIONAL TRACTOR (1/69-12/71) |
| (10-26) - HYDRAULICS, DRAFT CONTROL, FARMALL TRACTORS W/ S/N 13354 & BELOW, INT'L TRACTORS W/S/N 7664 & BELOW | (826) - INTERNATIONAL TRACTOR (1/69-12/71) |
| (10-37) - HYDRAULICS, DRAFT SENSING | (826) - INTERNATIONAL TRACTOR (1/69-12/71) |
| (N-10) - PARTS ACCESSORIES AND ATTACHMENTS, TRACTOR CAB AND CONNECTIONS, EXCEL CABS | (856) - INTERNATIONAL TRACTOR (1/67-12/83) |
| (B-14) - POWER TRAIN, DIFFERENTIAL LOCK | (856) - INTERNATIONAL TRACTOR (1/67-12/83) |
| (F-16[A]) - HYDRAULICS SYSTEM, HYDRAULIC CYLINDER STORAGE HOOK | (856) - INTERNATIONAL TRACTOR (1/67-12/83) |
| (F-37) - HYDRAULICS SYSTEM, DRAFT SENSING | (856) - INTERNATIONAL TRACTOR (1/67-12/83) |
| (066) - CHASSIS, FRONT AXLE | (B275) - MCCORMICK-INTERNATIONAL DIESEL TRACTOR (1/59-12/64) |
| (229) - HYDRAULIC SYSTEM, TOUCH-CONTROL SYSTEM, FARMALL 200 TRACTORS, ROCKSHAFT AND SUPPORTS, 3 ARM | (200) - FARMALL TRACTOR (1/54-12/56) |
| (229) - HYDRAULIC SYSTEM, TOUCH-CONTROL SYSTEM, FARMALL 200 TRACTORS, ROCKSHAFT AND SUPPORTS, 3 ARM | (230) - FARMALL GAS TRACTOR (1/56-12/58) |
| (195) - CHASSIS, CLUTCH CONTROLS AND TORQUE AMPLIFIER CONTROLS | (300) - FARMALL TRACTOR (1/54-12/56) |
| (195) - CHASSIS, CLUTCH CONTROLS AND TORQUE AMPLIFIER CONTROLS | (350) - FARMALL TRACTOR (1/56-12/58) |
| (B-33) - POWER TRAIN, FINAL DRIVE, COUNTERSHAFT AND CARRIER, TRACTORS WITH COTTON PICKER | (706) - FARMALL TRACTOR (1/63-12/67) |
| (148) - HYDRAULIC SYSTEM, CYL. BLOCK & HEAD, PISTONS, RODS, REGULATOR & CHECK VALVES & CONNECTIONS | (FARMALL C) - TRACTOR (1/48-12/51) |
| (158) - HYDRAULIC SYSTEM,TOUCH-CONTROL, 3-ARM, ROCKSHAFT, ROCKSHAFT ARMS, BEARINGS,OPERATING LINK AND BRACE | (FARMALL C) - TRACTOR (1/48-12/51) |
| (161) - HYDRAULIC SYSTEM,TOUCH-CONTROL, 4-ARM, ROCKSHAFT, ROCKSHAFT ARMS,BEARINGS,OPERATING LINK AND BRACE | (FARMALL C) - TRACTOR (1/48-12/51) |
| (149) - HYDRAULIC SYSTEM, TOUCH-CONTROL ROCKSHAFT, 3-ARM ROCKSHAFT ARMS, BEARINGS, OPERATING LINK & BRACE | (SUPER C) - FARMALL TRACTOR (1/51-12/53) |
| (151) - HYDRAULIC SYSTEM, TOUCH-CONTROL ROCKSHAFT, 4-ARM ROCKSHAFT ARMS, BEARINGS, OPERATING LINK & BRACE | (SUPER C) - FARMALL TRACTOR (1/51-12/53) |
