| Узел | Модель |
|---|
| (9C-04) - SEED MODULE DISCHARGE MANIFOLD | (CONCORD) - CYCLO AIR SINGULATION ATTACHMENT (1/96-12/00) |
| (B44) - TRIP SHANK ASSEMBLY | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B46) - TRIP SHANK ASSEMBLY | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (A-03) - RIGID CLAMP AND SHANK | (55) - INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (C-10) - AXLE AND CONNECTIONS | (55) - INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (D-06) - AXLE AND CONNECTIONS | (55) - INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (A-04) - GROUND WORKING TOOLS AND SHANKS, RIGID CLAMP AND SHANK | (5500) - INTERNATIONAL HARVESTER CHISEL PLOW (1/79-12/87) |
| (9-10) - BEAM AND SHANK WITH GAUGE WHEELS | (146) - CASE IH HIGH CLEARANCE CULTIVATOR (1/86-12/91) |
| (AP-20) - TOOLING EQUIPMENT, FOR NARROW ROW CORN AND COTTON CULTIVATORS, BUILT 1972 AND SINCE | (153) - INTERNATIONAL HARVESTER REAR-MOUNT CULTIVATOR (1/68-12/69) |
| (AP-21) - TOOLING EQUIPMENT, FOR WIDE ROW CORN AND COTTON CULTIVATORS, 1972 AND SINCE | (153) - INTERNATIONAL HARVESTER REAR-MOUNT CULTIVATOR (1/68-12/69) |
| (AS-03) - GANGS | (170) - INTERNATIONAL HARVESTER REAR-MOUNT CULTIVATOR (1/70-12/88) |
| (09-036) - ROLLING GUIDE FIN - RIGID | (1820) - CASE IH CULTIVATOR (1/97-8/01) |
| (9-24) - RIGID CLAMP AND SHANK, 25 INCH CLEARANCE | (184) - CASE IH CULTIVATOR (1/86-12/93) |
| (9-24) - RIGID CLAMP AND SHANK, 25 INCH CLEARANCE | (1840) - CASE IH CULTIVATOR (1/94-12/97) |
| (09-05) - ROW UNIT | (2240) - CASE IH CULTIVATOR (10/99-12/05) |
| (AT-05) - TOOLING EQUIPMENT, FOR ROUND TOOL BARS | (353) - INTERNATIONAL HARVESTER 6-ROW CULTIVATOR (1/68-12/70) |
| (AT-06) - TOOLING EQUIPMENT, FOR SQUARE TOOL BARS | (353) - INTERNATIONAL HARVESTER 6-ROW CULTIVATOR (1/68-12/70) |
| (AT-17) - BED RIPPER SHANK | (353) - INTERNATIONAL HARVESTER 6-ROW CULTIVATOR (1/68-12/70) |
| (D-06) - BEAM AND SHANK W/GAUGE WHEELS | (43) - INTERNATIONAL HARVESTER CULTIVATOR (1/67-12/68) |
| (E-4) - BEAM AND SHANK WITH GAUGE WHEELS | (46) - INTERNATIONAL HARVESTER 4 & 6-ROW HIGH CLEARANCE CULTIVATOR (1/67-12/70) |
| (AA-2) - GANG AND DISK PITCH EXTENSION ATTACHMENT | (470) - INTERNATIONAL HARVESTER CULTIVATOR (1/62-12/68) |
| (AH-4) - GANGS AND DISK PITCH EXTENSION ATTACHMENT | (670) - INTERNATIONAL HARVESTER REAR-MOUNTED LISTER CULTIVATOR (1/64-12/68) |
| (K-2) - GANG AND DISK PITCH EXTENSION ATTACHMENT | (70) - INTERNATIONAL HARVESTER REAR-MOUNTED LISTER CULTIVATOR (1/67-12/68) |
| (AM-12) - SQUARE BARS, EXTENSIONS AND CLAMPS, 1116 TOOLING EQUIPMENT, FOR TWO-ROW CULTIVATORS | (78) - INTERNATIONAL HARVESTER FRONT-MOUNTED CULTIVATOR (1/67-12/68) |
| (AM-17) - SQUARE BARS, EXTENSIONS & CLAMPS, 16, 19 & 19 DOUBLE SPRING TEETH EQUIP., 6-ROW CULTIVATORS (72- ) | (78) - INTERNATIONAL HARVESTER FRONT-MOUNTED CULTIVATOR (1/67-12/68) |
| (AN-21) - SQUARE BARS, EXTENSIONS & CLAMPS, 22, 25, 34 & 37 EQUIPMENT, 8 & 12-ROW NARROW (1972 & SINCE) | (85) - INTERNATIONAL HARVESTER CULTIVATOR (1/68-12/92) |
| (D-06) - PARALLEL LINKAGE, 1 PER ROW | (92) - INTERNATIONAL HARVESTER MIDDLEBUSTER (1/74-12/88) |
| (D-20) - RIPPER SHANK ATTACHMENT | (92) - INTERNATIONAL HARVESTER MIDDLEBUSTER (1/74-12/88) |
| (07-12) - RIGID CLAMP AND SHANK | (55) - MCCORMICK-INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (13-07) - RIGID CLAMP AND SHANK | (55) - MCCORMICK-INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (9-08) - HITCH, 1967 THROUGH 1972 | (450) - CASE IH MOLDBOARD PLOW (1/84-12/93) |
| (AG-19) - ON THE LAND HITCH, TRACTORS WITH FIXED DRAWBAR | (700) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/65-12/70) |
| (2-4) - DRIVE ASSEMBLY, LOWER | (8725) - 6' PICKUP FORAGE HEAD (1/99-12/00) |
| (A-09) - TONGUE AND JACK | (720) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/88) |
| (A-10) - ROTOR, KNIVES AND SIDE SHEET SCRAPER ATTACHMENT | (7) - INTERNATIONAL HARVESTER FLAIL CHOPPER (1/63-12/69) |
| (A-10) - ROTOR, KNIVES AND SIDE SHEET SCRAPER ATTACHMENT | (8) - INTERNATIONAL HARVESTER FLAIL CHOPPER (1/64-12/78) |
| (A-09) - TONGUE AND JACK | (830) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/80) |
| (09-07) - KNIFE ASSEMBLY | (1042) - DRAPER HEADER (8/98-3/04) |
| (09-19) - GAUGE WHEELS WITH TRANSPORT OPTION - LEFT WHEEL SUPPORT & HITCH | (1042) - DRAPER HEADER (8/98-3/04) |
| (09-21) - GAUGE WHEEL | (1042) - DRAPER HEADER (8/98-3/04) |
| (09-07) - KNIFE ASSEMBLY | (2042) - DRAPER HEADER (3/04-9/06) |
| (09-22) - GAUGE WHEELS WITH TRANSPORT OPTION - LEFT WHEEL SUPPORT, HITCH AND ELECTRICAL | (2042) - DRAPER HEADER (3/04-9/06) |
| (09-24) - GAUGE WHEEL | (2042) - DRAPER HEADER (3/04-9/06) |
| (09-41) - STABILIZER WHEELS | (2142) - DRAPER HEADER (9/06-11/11) |
| (09-41) - STABILIZER WHEELS | (2152) - DRAPER HEADER (9/06-11/11) |
| (09-41) - STABILIZER WHEELS | (2162) - DRAPER HEADER (9/06-11/11) |
| (25) - PLATFORM FRONT AUGER DRIVE | (1290) - INTERNATIONAL HARVESTER MOWER CONDITIONER (1/72-12/76) |
| (H-4) - MOUNTING & DRIVE PARTS, FARMALL CUB TRACTORS W/FAST HITCH | (C-1) - INTERNATIONAL HARVESTER ROTARY CUTTER (1/56-12/62) |
| (N-09) - CHAIN DRIVE MOUNTING PARTS | (HR-1) - INTERNATIONAL HARVESTER ROTARY CUTTER (1/67-12/71) |
| (N-09) - CHAIN DRIVE MOUNTING PARTS | (HR504) - INTERNATIONAL HARVESTER ROTARY CUTTER (1/67-12/71) |
| (A-03) - SUB-FRAME AND GRILLE GUARD, TRACTORS B414 1964 TO 1967, B275 1964 TO 1970 | (1501) - INTERNATIONAL LOADER (1/64-12/85) |
| (2-06) - FRAME AND BRACKETS | (2250) - CASE IH FRONT END LOADER (1/86-12/86) |
| (2-08) - FRAME AND BRACKETS | (2250) - CASE IH FRONT END LOADER (1/86-12/86) |
| (2-10) - FRAME AND BRACKETS | (2250) - CASE IH FRONT END LOADER (1/86-12/86) |
| (5-20) - COTTON MASTER, DISCONTINUED 1978, 2350 AND 2450 LOADERS | (2250) - CASE IH FRONT END LOADER (1/86-12/86) |
| (3-04) - SPACER MOUNTING PACKAGE | (2350) - CASE IH FRONT END LOADER (1/86-12/86) |
| (3-10) - FRAME AND BRACKETS, CASE TRACTORS 970, 1070, AND 1175 | (2350) - CASE IH FRONT END LOADER (1/86-12/86) |
| (5-20) - COTTON MASTER, DISCONTINUED 1978, 2350 AND 2450 LOADERS | (2350) - CASE IH FRONT END LOADER (1/86-12/86) |
| (4-04) - SPACER MOUNTING PACKAGE | (2450) - CASE IH FRONT END LOADER (1/86-12/97) |
| (4-10) - FRAME AND BRACKETS, CASE TRACTORS | (2450) - CASE IH FRONT END LOADER (1/86-12/97) |
| (5-20) - COTTON MASTER, DISCONTINUED 1978, 2350 AND 2450 LOADERS | (2450) - CASE IH FRONT END LOADER (1/86-12/97) |
| (B-03) - BASIC BLADE | (420) - INTERNATIONAL HARVESTER BLADE (1/63-12/88) |
| (B-05) - SUBFRAME AND SUPPORT 420 BLADE | (420) - INTERNATIONAL HARVESTER BLADE (1/63-12/88) |
| (B-03) - BASIC BLADE | (430) - INTERNATIONAL HARVESTER BLADE (1/63-12/88) |
| (B-09) - SUBFRAME AND SUPPORTS 430 BLADE | (430) - INTERNATIONAL HARVESTER BLADE (1/63-12/88) |
| (G-38) - MOUNTING & DRIVE PARTS, FARMALL CUB TRACTORS W/FAST HITCH | (C-1) - INTERNATIONAL HARVESTER ROTARY MOWER - CUB TRACTOR EQUIPMENT (1/59-12/62) |
| (G-39) - MOUNTING & DRIVE PARTS, INTERNATIONAL CUB LO-BOY & FARMALL CUB W/O FAST HITCH | (C-1) - INTERNATIONAL HARVESTER ROTARY MOWER - CUB TRACTOR EQUIPMENT (1/59-12/62) |
| (001) - MAIN FRAME & RELATED PARTS | (RRX160) - REAR MOUNT ROTARY FINISHING MOWER (8/04-12/07) |
| (001) - MAIN FRAME & RELATED PARTS | (RRX172) - REAR MOUNT ROTARY FINISHING MOWER (8/04-12/07) |
| (L-2) - PLATFORM, SPINDLES, PULLEYS AND MOUNTING PARTS | (C-4) - INTERNATIONAL HARVESTER ROTARY CUTTER (1/58-12/71) |
| (02-12) - DRIVE ASSEMBLY (PICKUP BELT TIGHTENER) | (8420) - CASE IH ROUND BALER (1/88-12/00) |
| (2-20) - DRIVE ASSEMBLY, SERIAL NUMBER CFH0124401 AND LATER | (8435) - CASE IH SILAGE SPECIAL ROUND BALER (1/97-12/00) |
| (9-14) - GATHERING WHEEL KIT, (HK50428 GATHERING WHEEL KIT | (8455) - CASE IH ROUND BALER (STANDARD) (1/92-12/99) |
| (9-32) - GATHERING WHEEL KIT, HK50428 GATHERING WHEEL KIT COMPLETE, TO BE ORDERED THROUGH WHOLEGOODS ONLY | (8455T) - CASE IH ROUND BALER W/TRACTOR HYDRAULICS (1/92-12/97) |
| (9-30) - GATHERING WHEEL KIT, HK50428 GATHERING WHEEL KIT COMPLETE, TO BE ORDERED THROUGH WHOLEGOODS ONLY | (8460) - CASE IH ROUND BALER (S/N CFH0057418 & AFTER) (1/88-12/93) |
| (9-32) - GATHERING WHEEL KIT, HK50428 GATHERING WHEEL KIT COMPLETE, TO BE ORDERED THROUGH WHOLEGOODS ONLY | (8465) - CASE IH AUTO ROUND BALER (1/91-12/97) |
| (9-34) - GATHERING WHEEL KIT, HK50428 GATHERING WHEEL KIT COMPLETE, TO BE ORDERED THROUGH WHOLEGOODS ONLY | (8465T) - CASE IH ROUND BALER W/TRACTOR HYDRAULICS (1/91-12/97) |
| (2-32) - ROLLER DRIVE ASSEMBLY, LOWER | (RS451) - CASE IH ROUND BALER (1/99-12/00) |
| (8-36) - HYDRAULIC CYLINDER MOUNTING ASSEMBLY, MESH WRAP | (RS451) - CASE IH ROUND BALER (1/99-12/00) |
| (7-06) - MAINFRAME, AXLE AND PICKUP CRANK ASSEMBLIES | (RS451) - CASE IH ROUND BALER (1/99-12/00) |
| (8-40) - HYDRAULIC CYLINDER MOUNTING ASSEMBLY, MESH WRAP | (RS551) - CASE IH ROUND BALER (1/99-12/00) |
| (02-036) - ROLLER DRIVE ASSEMBLY (LOWER) S.N. CFH0156001 THRU CFH0156399 | (RS561) - CASE IH ROUND BALER (1/99-12/00) |
| (02-038) - ROLLER DRIVE ASSEMBLY (LOWER) S.N. CFH0156400 AND LATER | (RS561) - CASE IH ROUND BALER (1/99-12/00) |
| (02-042) - ROLLER DRIVE ASSEMBLY (UPPER) S.N. CFH0156400 AND LATER | (RS561) - CASE IH ROUND BALER (1/99-12/00) |
| (08-064) - HYDRAULIC CYLINDER MOUNTING ASSEMBLY (MESH WRAP) | (RS561) - CASE IH ROUND BALER (1/99-12/00) |
| (07-006) - MAINFRAME, AXLE AND PICKUP CRANK ASSEMBLIES | (RS561) - CASE IH ROUND BALER (1/99-12/00) |
| (2-030) - ROLLER DRIVE ASSEMBLY, LOWER | (RS561A) - CASE IH ROUND BALER (1/99-12/00) |
| (2-032) - ROLLER DRIVE ASSEMBLY, UPPER | (RS561A) - CASE IH ROUND BALER (1/99-12/00) |
| (8-046) - HYDRAULIC CYLINDER MOUNTING ASSEMBLY, MESH WRAP | (RS561A) - CASE IH ROUND BALER (1/99-12/00) |
| (7-006) - MAINFRAME, AXLE AND PICKUP CRANK ASSEMBLIES | (RS561A) - CASE IH ROUND BALER (1/99-12/00) |
| (2-04) - DRIVE LINE AND MOUNTING ASSEMBLY | (8575) - CASE IH MID-SIZE RECTANGULAR BALER (EUROPE) (1/95-12/00) |
| (2-16) - GEARBOX MOUNTING ASSEMBLY | (8575) - CASE IH MID-SIZE RECTANGULAR BALER (EUROPE) (1/95-12/00) |
| (02-022) - GEARBOX MOUNTING ASSEMBLY | (8575) - CASE IH MID-SIZE RECTANGULAR BALER (NORTH AMERICA) (1/95-12/00) |
| (9-20) - SHEAR BOLT KITS | (8585) - CASE IH LARGE (3 X 4) RECTANGLER BALER (1/98-12/00) |
| (2-24) - SHAFT AND SPROCKET ASSEMBLY | (8585) - CASE IH LARGE (3 X 4) RECTANGLER BALER (1/98-12/00) |
| (75.200.01) - 24 & 24 SPRING COULTER | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/09) |
| (75.200.16) - MARKER ARM LINKAGES | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/12) |
| (75.200.01) - 20" & 24" SPRING COULTER | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (75.200.01) - 20" & 24" SPRING COULTER | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (75.200.16) - MARKER ARM LINKAGES | (5310) - DMI NUTRI-TILL'R (6/06-12/09) |
| (75.200.16) - MARKER ARM LINKAGES | (5310) - NUTRI-TILLER - PULL TYPE (1/02-12/12) |
| (9-012) - HITCH SUPPORTS, MULTIPLE DRILLS | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (9-022) - HITCH TWO DRILL HEAVY DUTY | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (9-070) - HEAVY DUTY HITCH, TWO DRILL, MACHINES BUILT 1980 THROUGH 1984 | (7100) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-064) - HEAVY DUTY HITCH - TWO DRILL, MACHINES BUILT 1980 THROUGH | (7200) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-196) - PRESS WHEEL FRAME CUSHION PARTS, UNITS WITH 7 INCH ROW SPACING, 45 FOOT WIDE DRILL | (8500) - CASE IH AIR DRILL (8/86-12/89) |
| (9-198) - PRESS WHEEL FRAME CUSHION PARTS, UNITS WITH 7 INCH ROW SPACING, 33 FOOT WIDE DRILL | (8500) - CASE IH AIR DRILL (8/86-12/89) |
| (9-32) - TRIP SHANK ASSEMBLY | (NFX) - CASE IH AIR TILL DRILL (1/95-12/00) |
| (75.110.47[02]) - LIQUID FERTILIZER COULTER LEFT SIDE BEFORE SERIAL NUMBER YCS0028601 | (1250) - FRONT FOLD TRAILING PLANTER EARLY RISER SERIES (11/01-12/13) |
| (07-15) - SEED HANDLING,CUTOFF BRUSH,MANIFOLD,SEED TUBES & RELATED PARTS | (800) - CASE IH PLANTER (1/77-12/86) |
| (9-116) - SEED MODULE DISCHARGE MANIFOLD, CYCLO AIR PLANTERS | (900) - CASE IH PLANTER (1/87-12/95) |
| (9C-24) - SEED MODULE DISCHARGE MANIFOLD | (950) - CASE IH SEMI-MOUNTED PLANTER (11/93-12/95) |
| (9C-32) - SEED MODULE DISCHARGE MANIFOLD, ALL RIGID, VERTICAL FOLD, AND FRONT FOLD | (950) - CASE IH TRAILING PLANTER (7/89-12/95) |
| (9C-28) - SEED MODULE DISCHARGE MANIFOLD | (955) - CASE IH MOUNTED PLANTER (10/95-12/99) |
| (9C-54) - SEED MODULE DISCHARGE MANIFOLD, ALL RIGID, VERTICAL FOLD, FRONT FOLD & PARALLEL FRONT FOLD PLANTERS | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (9E-10) - ROW MARKER, 12/23 SOLID ROW CROP - FRONT FOLD | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (9E-17A) - ROW MARKER LIFT ARM, 24 ROW NARROW - FRONT FOLD, P.I.N. | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (9-186) - RIGID CLAMP AND SHANK, REGULAR CLEARANCE - 26" | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-186) - RIGID CLAMP AND SHANK, REGULAR CLEARANCE - 26" | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (09-036) - ROLLING GUIDE FIN - RIGID | (1830) - CASE IH CULTIVATOR (1/92-12/05) |
| (09-036) - ROLLING GUIDE FIN - RIGID | (1830) - CASE IH CULTIVATOR (1/92-12/05) |
| (9-28) - DISC AND GANG 1-1/2 INCH ROUND ARBOR BOLT | (496) - CASE IH DISK HARROW (1/80-12/91) |
| (09-08) - WHEEL, REAR FURROW | (165) - CASE IH MOLDBOARD PLOW (1/96-12/00) |
| (75.200.04) - PLOW BOTTOM 16" | (600 SERIES) - DMI HYDRA WIDE PLOW (1/78-12/98) |
| (75.200.05) - PLOW BOTTOM 18" | (600 SERIES) - DMI HYDRA WIDE PLOW (1/78-12/98) |
| (75.200.24) - SPIKE HARROW PARTS | (370 TRUE-TANDEM) - 19'-37' DISK HARROW (1/09-12/15) |
| (9-16) - CUSHION DISK GANG, PRIOR TO P.I.N. JAG0183120 | (3900) - CASE IH FLEX WING TANDEM DISK HARROW (1/91-12/97) |
| (75.200.24) - SPIKE HARROW PARTS | (RMX370) - TANDEM DISK (6/03-12/09) |
| (2-4) - DRIVE ASSEMBLY, RIGHT | (8750) - 7' FORAGE PICKUP HEAD (1/97-12/99) |
| (03-12) - GATHERING CHAIN TENSIONER ASSEMBLY, 30" ROW | (8725) - 2-ROW FORAGE HEAD (30" AND 38" ROWS) (1/99-12/00) |
| (03-14) - GATHERING CHAIN TENSIONER ASSEMBLY, 38" ROW | (8725) - 2-ROW FORAGE HEAD (30" AND 38" ROWS) (1/99-12/00) |
| (07.01) - HYDRAULIC TONGUE SWING | (FHX300) - CASE IH PULL-TYPE FORAGE HARVESTER (11/01-12/15) |
| (B-21) - SPOUT SUPPORT ATTACHMENT | (55) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/65-12/66) |
| (F-028) - SPOUT SUPPORT ATTACHMENT | (555) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/73-12/75) |
| (9-24) - AUGER AND DRIVE, 600 BLOWER | (600) - INTERNATIONAL HARVESTER BLOWER (1/82-12/15) |
| (25-14) - GRAIN AND TAILINGS ELEVATORS, TAILINGS ELEVATOR DRIVE | (1420) - INTERNATIONAL HARVESTER COMBINE (NORTH AMERICA) (1/81-12/82) |
| (20-15) - SEPARATOR, BELT DRIVE, RH SIDE | (1420) - INTERNATIONAL HARVESTER COMBINE (NORTH AMERICA) (1/81-12/82) |
| (20-14) - SEPARATOR, STRAW SPREADER DRIVE, SERIAL NO. 10060 AND ABOVE W/STRAW CHOPPER | (1470) - INTERNATIONAL HARVESTER HILLSIDE COMBINE (1/80-12/87) |
| (20-18) - SEPARATOR, BELT DRIVE - RH SIDE | (1470) - INTERNATIONAL HARVESTER HILLSIDE COMBINE (1/80-12/87) |
| (20-20) - SEPARATOR, BELT DRIVE, RH SIDE | (1440) - CASE IH AXIAL-FLOW COMBINE (NORTH AMERICA) (1/77-12/84) |
| (20-16) - SEPARATOR, STRAW SPREADER DRIVE, S/N 23401 AND ABOVE, S/N 23400 AND BELOW WITH STRAW CHOPPER | (1460) - CASE IH AXIAL-FLOW COMBINE (NORTH AMERICA) (1/77-12/84) |
| (20-20) - SEPARATOR, BELT DRIVE, RH SIDE | (1460) - CASE IH AXIAL-FLOW COMBINE (NORTH AMERICA) (1/77-12/84) |
| (17-039) - BELT DRIVE, RIGHT-HAND SIDE | (1460) - INTERNATIONAL HARVESTER COMBINE (EUROPE) (1/77-12/84) |
| (17-137) - ELEVATOR DRIVE | (1460) - INTERNATIONAL HARVESTER COMBINE (EUROPE) (1/77-12/84) |
| (25-14) - GRAIN AND TAILINGS ELEVATORS, ELEVATOR DRIVE, RICE S/N 1501 & ABOVE, GRAIN & CORN S/N 14001 & ABOVE | (1480) - CASE IH AXIAL-FLOW COMBINE (1/78-12/84) |
| (20-13) - SEPARATOR, STRAW SPREADER DRIVE, S/N. 24001 & ABOVE, FOR COMBINE W/S/N 24000 & BELOWW/ STRAW CHOPPER | (1480) - CASE IH AXIAL-FLOW COMBINE (1/78-12/84) |
| (20-17) - SEPARATOR, BELT DRIVE - RH SIDE | (1480) - CASE IH AXIAL-FLOW COMBINE (1/78-12/84) |
| (9A-06) - RIGHT SIDE BELT DRIVE, (CON'T) | (1620) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0032630 & AFTER) (NORTH AMERICA) (1/90-12/92) |
| (9D-20) - GRAIN ELEVATOR DRIVE | (1620) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0032630 & AFTER) (NORTH AMERICA) (1/90-12/92) |
| (9D-30) - TAILINGS ELEVATOR DRIVE | (1620) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0032630 & AFTER) (NORTH AMERICA) (1/90-12/92) |
| (9A-02) - BELT DRIVE - FAN JACKSHAFT | (1640) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0034705 & AFTER) (NORTH AMERICA) (1/86-12/92) |
| (9A-04) - BELT DRIVE - RIGHT SIDE | (1640) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0034705 & AFTER) (NORTH AMERICA) (1/86-12/92) |
| (9E-36) - UNLOADER SUPPORTS | (1640) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0034705 & AFTER) (NORTH AMERICA) (1/86-12/92) |
| (9A-02) - BELT DRIVE, FAN JACKSHAFT | (1644) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (9A-04) - BELT DRIVE, RIGHT-HAND SIDE | (1644) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (9E-26) - UNLOADER, SUPPORTS | (1644) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (9A-02) - BELT DRIVE, FAN JACKSHAFT | (1660) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0038346) (NORTH AMERICA) (1/86-12/89) |
| (9A-04) - BELT DRIVE, RIGHT HAND SIDE | (1660) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0038346) (NORTH AMERICA) (1/86-12/89) |
| (9A-06) - BELT DRIVE, RIGHT HAND SIDE, (CONT'D) | (1660) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0038346) (NORTH AMERICA) (1/86-12/89) |
| (9E-24) - UNLOADER SUPPORTS | (1660) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0038346) (NORTH AMERICA) (1/86-12/89) |
| (9A-02) - BELT DRIVE, FAN JACKSHAFT | (1660) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0038346 & AFTER) (NORTH AMERICA) (1/86-12/89) |
| (9A-06) - BELT DRIVE, RIGHT-HAND SIDE (CONT'D) | (1660) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0038346 & AFTER) (NORTH AMERICA) (1/86-12/89) |
| (9E-38) - UNLOADER, SUPPORTS | (1660) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0038346 & AFTER) (NORTH AMERICA) (1/86-12/89) |
| (9F-04) - STRAW SPREADER, DRIVE | (1660) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0038346 & AFTER) (NORTH AMERICA) (1/86-12/89) |
| (9A-02) - BELT DRIVE, FAN JACKSHAFT | (1666) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (9A-04) - BELT DRIVE, RIGHT HAND SIDE | (1666) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (9E-26) - UNLOADER, SUPPORTS | (1666) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (9A-02) - FAN JACKSHAFT BELT DRIVE | (1680) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0045689) (NORTH AMERICA) (1/86-7/89) |
| (9A-04) - RIGHT-HAND SIDE BELT DRIVE | (1680) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0045689) (NORTH AMERICA) (1/86-7/89) |
| (9A-06) - RIGHT-HAND SIDE BELT DRIVE (CONT'D) | (1680) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0045689) (NORTH AMERICA) (1/86-7/89) |
| (9E-24) - UNLOADER, SUPPORTS | (1680) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0045689) (NORTH AMERICA) (1/86-7/89) |
| (9F-04) - STRAW SPREADER, DRIVE | (1680) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0045689) (NORTH AMERICA) (1/86-7/89) |
| (9A-02) - FAN JACKSHAFT BELT DRIVE | (1680) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0045689 & AFTER) (NORTH AMERICA) (8/89-12/92) |
| (9A-06) - RIGHT SIDE BELT DRIVE (CONT'D) | (1680) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0045689 & AFTER) (NORTH AMERICA) (8/89-12/92) |
| (9E-40) - UNLOADER SUPPORTS | (1680) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0045689 & AFTER) (NORTH AMERICA) (8/89-12/92) |
| (9F-04) - STRAW SPREADER DRIVE, PRIOR TO P.I.N. JJC0047025 | (1680) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0045689 & AFTER) (NORTH AMERICA) (8/89-12/92) |
| (070) - RIGHT SIDE BELT DRIVE, EXTENDED LENGTH CLEANING SYSTEM | (1680) - COMBINE SUPPLEMENT (1/86-12/88) |
| (9-102) - BEATER AND SHAKER BELT DRIVE (CONT'D) | (1682) - CASE IH PULL-TYPE AXIAL-FLOW COMBINE (1/87-12/91) |
| (9-134) - UPPER UNLOADER SUPPORTS | (1682) - CASE IH PULL-TYPE AXIAL-FLOW COMBINE (1/87-12/91) |
| (9-140) - STRAW SPREADER DRIVE | (1682) - CASE IH PULL-TYPE AXIAL-FLOW COMBINE (1/87-12/91) |
| (9A-02) - FAN JACKSHAFT BELT DRIVE | (1688) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (9A-04) - RIGHT HAND SIDE BELT DRIVE | (1688) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (9E-28) - UNLOADER, SUPPORTS | (1688) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (8-48) - UNLOADER CLUTCH SYSTEM | (2144) - CASE IH AXIAL-FLOW COMBINE (1/95-12/97) |
| (9A-02) - BELT DRIVE, FAN JACKSHAFT | (2144) - CASE IH AXIAL-FLOW COMBINE (1/95-12/97) |
| (9A-04) - BELT DRIVE, RIGHT HAND SIDE | (2144) - CASE IH AXIAL-FLOW COMBINE (1/95-12/97) |
| (9E-28) - UNLOADER, SUPPORTS | (2144) - CASE IH AXIAL-FLOW COMBINE (1/95-12/97) |
| (8-54) - UNLOADER CLUTCH SYSTEM | (2166) - CASE IH AXIAL-FLOW COMBINE (NA) (1/95-12/97) |
| (9A-02) - BELT DRIVE, FAN JACKSHAFT | (2166) - CASE IH AXIAL-FLOW COMBINE (NA) (1/95-12/97) |
| (9A-04) - BELT DRIVE, RIGHT-HAND SIDE | (2166) - CASE IH AXIAL-FLOW COMBINE (NA) (1/95-12/97) |
| (9E-28) - UNLOADER, SUPPORTS | (2166) - CASE IH AXIAL-FLOW COMBINE (NA) (1/95-12/97) |
| (8-54) - UNLOADER CLUTCH SYSTEM | (2188) - CASE IH AXIAL-FLOW COMBINE (NA) (1/95-12/97) |
| (9A-02) - BELT DRIVE, FAN JACKSHAFT | (2188) - CASE IH AXIAL-FLOW COMBINE (NA) (1/95-12/97) |
| (9E-28) - UNLOADER, SUPPORTS | (2188) - CASE IH AXIAL-FLOW COMBINE (NA) (1/95-12/97) |
| (08-27) - HYDRAULICS - UNLOADER CLUTCH - JJC0174399 | (2344) - CASE IH AXIAL-FLOW COMBINE (1/98-1/02) |
| (08-28) - HYDRAULICS - UNLOADER CLUTCH - JJC0174400 | (2344) - CASE IH AXIAL-FLOW COMBINE (1/98-1/02) |
| (09A-01) - BELT DRIVE - JACKSHAFT, FAN | (2344) - CASE IH AXIAL-FLOW COMBINE (1/98-1/02) |
| (09A-02) - BELT DRIVE - RIGHT HAND SIDE | (2344) - CASE IH AXIAL-FLOW COMBINE (1/98-1/02) |
| (09E-12) - UNLOADER - SUPPORTS | (2344) - CASE IH AXIAL-FLOW COMBINE (1/98-1/02) |
| (08-29) - HYDRAULICS - UNLOADER CLUTCH - BSN JJC0253999 | (2366) - CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04) |
| (08-30) - HYDRAULICS - UNLOADER CLUTCH - ASN JJC0254000 | (2366) - CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04) |
| (09A-01) - BELT DRIVE - JACKSHAFT, FAN | (2366) - CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04) |
| (09A-02) - BELT DRIVE - RIGHT HAND SIDE | (2366) - CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04) |
| (09E-12) - UNLOADER - SUPPORTS | (2366) - CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04) |
| (08-24) - HYDRAULICS - UNLOADER CLUTCH | (2377) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001&HAJ300000 (11/04-12/07) |
| (09A-01) - BELT DRIVE - JACKSHAFT, FAN | (2377) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001&HAJ300000 (11/04-12/07) |
| (09A-02) - BELT DRIVE - RIGHT-HAND SIDE | (2377) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001&HAJ300000 (11/04-12/07) |
| (09E-13) - UNLOADER - SUPPORTS | (2377) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001&HAJ300000 (11/04-12/07) |
| (08-27) - HYDRAULICS - UNLOADER CLUTCH BSN JJC0268799 | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BSN JJC0276540 (10/97-12/04) |
| (08-28[01]) - HYDRAULICS - UNLOADER CLUTCH, BTW JJC0268800 & JJC0270499 | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BSN JJC0276540 (10/97-12/04) |
| (08-28[02]) - HYDRAULICS - UNLOADER CLUTCH, ASN JJC0270500 | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BSN JJC0276540 (10/97-12/04) |
| (09A-01) - BELT DRIVE - JACKSHAFT, FAN | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BSN JJC0276540 (10/97-12/04) |
| (09E-12) - UNLOADER - SUPPORTS | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BSN JJC0276540 (10/97-12/04) |
| (08-24) - HYDRAULICS - UNLOADER CLUTCH | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001 & HAJ300000 (1/98-12/07) |
| (09A-01) - BELT DRIVE - JACKSHAFT, FAN | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001 & HAJ300000 (1/98-12/07) |
| (09A-02) - BELT DRIVE - RIGHT-HAND SIDE | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001 & HAJ300000 (1/98-12/07) |
| (09E-13) - UNLOADER - SUPPORTS | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001 & HAJ300000 (1/98-12/07) |
| (08-25) - HYDRAULICS - UNLOADER CLUTCH | (2388) - CASE IH AXIAL-FLOW COMBINE (RU) ASN HAJ300001 (10/06-12/07) |
| (09A-01) - BELT DRIVE - JACKSHAFT, FAN | (2388) - CASE IH AXIAL-FLOW COMBINE (RU) ASN HAJ300001 (10/06-12/07) |
| (09A-02) - BELT DRIVE - RIGHT-HAND SIDE | (2388) - CASE IH AXIAL-FLOW COMBINE (RU) ASN HAJ300001 (10/06-12/07) |
| (09E-13) - UNLOADER - SUPPORTS | (2388) - CASE IH AXIAL-FLOW COMBINE (RU) ASN HAJ300001 (10/06-12/07) |
| (35.440.05) - HYDRAULICS - UNLOADER CLUTCH | (2577) - AXIAL-FLOW COMBINE (NA) ASN HAJ0300001 (1/06-12/07) |
| (74.101.14) - BELT DRIVE - JACKSHAFT, FAN | (2577) - AXIAL-FLOW COMBINE (NA) ASN HAJ0300001 (1/06-12/07) |
| (74.101.17) - BELT DRIVE - RIGHT-HAND SIDE | (2577) - AXIAL-FLOW COMBINE (NA) ASN HAJ0300001 (1/06-12/07) |
| (80.150.14) - UNLOADER - SUPPORTS | (2577) - AXIAL-FLOW COMBINE (NA) ASN HAJ0300001 (1/06-12/07) |
| (35.440.05) - HYDRAULICS - UNLOADER CLUTCH | (2588) - CASE IH AXIAL-FLOW COMBINE (NA) ASN HAJ300001 (10/06-12/06) |
| (74.101.14) - BELT DRIVE - JACKSHAFT, FAN | (2588) - CASE IH AXIAL-FLOW COMBINE (NA) ASN HAJ300001 (10/06-12/06) |
| (74.101.17) - BELT DRIVE - RIGHT-HAND SIDE | (2588) - CASE IH AXIAL-FLOW COMBINE (NA) ASN HAJ300001 (10/06-12/06) |
| (80.150.14) - UNLOADER - SUPPORTS | (2588) - CASE IH AXIAL-FLOW COMBINE (NA) ASN HAJ300001 (10/06-12/06) |
| (74.136.AC[02]) - FAN DRIVE IDLER | (5088) - AXIAL-FLOW COMBINE (NA) (4/07-1/12) |
| (74.140.AM) - TAILINGS ELEVATOR JACKSHAFT IDLER | (5088) - AXIAL-FLOW COMBINE (NA) (4/07-1/12) |
| (73.140.AM) - JACKSHAFT, ELEVATOR | (5130) - COMBINE - TIER 4 COMMON CAB (1/13-3/14) |
| (74.136.AC[02]) - IDLER, DRIVE, FAN | (5130) - COMBINE - TIER 4 COMMON CAB (1/13-3/14) |
| (74.140.AM) - JACKSHAFT, IDLER, TAILINGS ELEVATOR | (5130) - COMBINE - TIER 4 COMMON CAB (1/13-3/14) |
| (74.130.21) - PULLEY ASSEMBLY CLEANING FAN, CLEANING FAN DRIVE JACKSHAFT ASSEMBLY, IDLER ASSEMBLY FAN DRIVE WITH PULLEY | (5130) - COMBINE TIER 4 (1/12-1/13) |
| (74.140.20) - ELEVATOR JACKSHAFT, DRIVE IDLER | (5130) - COMBINE TIER 4 (1/12-1/13) |
| (74.136.AC[02]) - IDLER, DRIVE, FAN | (5140) - COMBINE - TIER 4B (NA) (3/14-10/15) |
| (74.140.AM) - JACKSHAFT, IDLER, TAILINGS ELEVATOR | (5140) - COMBINE - TIER 4B (NA) (3/14-10/15) |
| (74.136.AC[02]) - FAN DRIVE IDLER | (6088) - AXIAL-FLOW COMBINE (NA) (4/07-1/12) |
| (74.140.AM) - TAILINGS ELEVATOR JACKSHAFT IDLER | (6088) - AXIAL-FLOW COMBINE (NA) (4/07-1/12) |
| (73.140.AM) - JACKSHAFT, ELEVATOR | (6130) - COMBINE - TIER 4 COMMON CAB (1/13-3/14) |
| (74.136.AC[02]) - IDLER, DRIVE, FAN | (6130) - COMBINE - TIER 4 COMMON CAB (1/13-3/14) |
| (74.140.AM) - JACKSHAFT, IDLER, TAILINGS ELEVATOR | (6130) - COMBINE - TIER 4 COMMON CAB (1/13-3/14) |
| (74.130.21) - PULLEY ASSEMBLY CLEANING FAN, CLEANING FAN DRIVE JACKSHAFT ASSEMBLY, IDLER ASSEMBLY FAN DRIVE WITH PULLEY | (6130) - COMBINE TIER 4 (1/12-1/13) |
| (74.140.20) - ELEVATOR JACKSHAFT, DRIVE IDLER | (6130) - COMBINE TIER 4 (1/12-1/13) |
| (74.136.AC[02]) - IDLER, DRIVE, FAN | (6140) - COMBINE - TIER 4B (NA) (3/14-10/15) |
| (74.140.AM) - JACKSHAFT, IDLER, TAILINGS ELEVATOR | (6140) - COMBINE - TIER 4B (NA) (3/14-10/15) |
| (74.136.AC[02]) - FAN DRIVE IDLER | (7088) - AXIAL-FLOW COMBINE (NA) (4/07-1/12) |
| (74.140.AM) - TAILINGS ELEVATOR JACKSHAFT IDLER | (7088) - AXIAL-FLOW COMBINE (NA) (4/07-1/12) |
| (73.140.AM) - JACKSHAFT, ELEVATOR | (7130) - COMBINE - TIER 4 COMMON CAB (1/13-3/14) |
| (74.136.AC[02]) - IDLER, DRIVE, FAN | (7130) - COMBINE - TIER 4 COMMON CAB (1/13-3/14) |
| (74.140.AM) - JACKSHAFT, IDLER, TAILINGS ELEVATOR | (7130) - COMBINE - TIER 4 COMMON CAB (1/13-3/14) |
| (74.130.21) - PULLEY ASSEMBLY CLEANING FAN, CLEANING FAN DRIVE JACKSHAFT ASSEMBLY, IDLER ASSEMBLY FAN DRIVE WITH PULLEY | (7130) - COMBINE TIER 4 (1/12-1/13) |
| (74.140.20) - ELEVATOR JACKSHAFT, DRIVE IDLER | (7130) - COMBINE TIER 4 (1/12-1/13) |
| (74.136.AC[02]) - IDLER, DRIVE, FAN | (7140) - COMBINE - TIER 4B (NA) - 2014 (3/14-10/15) |
| (74.140.AM) - JACKSHAFT, IDLER, TAILINGS ELEVATOR | (7140) - COMBINE - TIER 4B (NA) - 2014 (3/14-10/15) |
| (9A-02) - FAN JACKSHAFT BELT DRIVE | (1670) - CASE IH HILLSIDE COMBINE (S/N JJC0080540 & AFTER) (8/90-12/91) |
| (9A-04) - BELT DRIVE, RIGHT HAND SIDE | (1670) - CASE IH HILLSIDE COMBINE (S/N JJC0080540 & AFTER) (8/90-12/91) |
| (9E-26) - UNLOADER SUPPORTS | (1670) - CASE IH HILLSIDE COMBINE (S/N JJC0080540 & AFTER) (8/90-12/91) |
| (25-11) - GRAIN AND TAILINGS ELEVATORS, ELEVATOR DRIVE, GRAIN | (1482) - INTERNATIONAL HARVESTER PULL BEHIND COMBINE (1/80-12/86) |
| (20-13) - SEPARATOR, STRAW SPREADER DRIVE, SERIAL NUMBER 10001 AND ABOVE, WITH STRAW CHOPPER | (1482) - INTERNATIONAL HARVESTER PULL BEHIND COMBINE (1/80-12/86) |
| (15-03) - WHEELS AND TRACTION, TRACK, CHAIN AND FRAME, SERIAL NO. 8000 AND BELOW | (715) - INTERNATIONAL HARVESTER COMBINE (PRIOR TO S/N 23001) (1/71-12/79) |
| (2-50) - ENGINE SUPPORTS | (2155) - CASE IH COTTON EXPRESS COTTON PICKER (2/95-12/96) |
| (02-07) - MOUNTING, ENGINE | (2555) - CASE IH COTTON EXPRESS COTTON PICKER (AFTER S/N JJC0249500) (8/00-12/05) |
| (02-07) - MOUNTING, ENGINE | (2555) - CASE IH COTTON EXPRESS COTTON PICKER (BEFORE S/N JJC0249499) (1/97-7/00) |
| (02-27) - MOUNTING, ENGINE | (420) - CASE IH COTTON EXPRESS COTTON PICKER (9/06-12/10) |
| (02-27) - MOUNTING, ENGINE | (420 TIER 3) - COTTON EXPRESS COTTON PICKER (3/08-12/10) |
| (02-24) - ENGINE MOUNTING | (620) - CASE IH COTTON EXPRESS COTTON PICKER (9/06-) |
| (10.012.01) - ENGINE MOUNTING | (625) - MODULE EXPRESS COTTON PICKER (6/06-12/10) |
| (10.012.01) - ENGINE MOUNTING ENGINE MOUNTING | (635) - MODULE EXPRESS (1/08-7/13) |
| (9E-06) - FRAME, DRAWBAR AND HITCH | (1400) - INTERNATIONAL HARVESTER COTTON HARVESTER (1/79-12/86) |
| (9A-26) - CROSS AUGER DRIVE | (1400) - INTERNATIONAL HARVESTER COTTON HARVESTER (1/79-12/86) |
| (9C-06) - BASKET PIVOT SUPPORT | (1400) - INTERNATIONAL HARVESTER COTTON HARVESTER (1/79-12/86) |
| (09-01) - FRAME, MAIN FRAME AND SUPPORTS | (95) - INTERNATIONAL HARVESTER COTTON HARVESTER (1/74-12/88) |
| (09-01) - FRAME, MAIN FRAME AND SUPPORTS | (95) - INTERNATIONAL HARVESTER FINGER HEAD COTTON HARVESTER (1/74-12/88) |
| (A-02) - CHASSIS, RADIATOR AND SHEET METAL, MAIN FRAME AND SUPPORTS | (616) - INTERNATIONAL HARVESTER COTTON PICKER (1/80-12/88) |
| (A-02) - CHASSIS, RADIATOR AND SHEET METAL, MAIN FRAME AND SUPPORTS | (622) - INTERNATIONAL HARVESTER COTTON PICKER (1/80-12/88) |
| (9-414) - MAIN FRAME AND RELATED PARTS | (782) - CASE IH COTTON PICKER (5/86-12/87) |
| (9-414) - MAIN FRAME AND RELATED PARTS | (782) - INTERNATIONAL HARVESTER COTTON PICKER (1/71-12/87) |
| (02-27) - MOUNTING, ENGINE | (CPX420) - CASE IH COTTON PICKER (5/05-8/06) |
| (02-08) - ENGINE MOUNTING | (CPX610) - CASE IH COTTON PICKER (8/01-12/05) |
| (02-08) - ENGINE MOUNTING | (CPX620) - CASE IH COTTON PICKER (5/05-8/06) |
| (09-16) - KNIFE ASSEMBLY | (1052) - DRAPER HEADER (1/99-3/03) |
| (09-10) - KNIFE ASSEMBLY | (2052) - DRAPER HEADER (4/03-9/06) |
| (09-08) - KNIFE ASSEMBLY | (2062) - DRAPER HEADER (4/03-9/06) |
| (8-42) - HYDRAULIC REEL LIFT ASSEMBLY | (425) - SHIFTABLE DRAPER GRAIN HEADER (1/99-12/01) |
| (9-24) - KNIFE AND DRIVE GROUP, 36 FOOT HEADER | (6000) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/88) |
| (9-30) - REEL DRIVE | (6000) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/88) |
| (9-24) - KNIFE AND DRIVE GROUP, 36 FOOT HEADER | (6500) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/90) |
| (9-30) - REEL DRIVE | (6500) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/90) |
| (2-10) - SICKLE DRIVE ASSEMBLY | (8820) - DRAPER HEADER (15, 18 & 21 FT.) (12/91-12/99) |
| (9-010) - GAUGE WHEEL KIT, HK60612 GAUGE WHEEL KIT COMPLETE, TO BE ORDERED THRU WHOLEGOODS ONLY | (8820) - DRAPER HEADER (15, 18 & 21 FT.) (12/91-12/99) |
| (9-024) - HAY CONDITIONER DRIVE ASSEMBLY | (8820) - DRAPER HEADER (15, 18 & 21 FT.) (12/91-12/99) |
| (9-042) - HAY CONDITIONER DRIVE ASSEMBLY | (8820) - DRAPER HEADER (15, 18 & 21 FT.) (12/91-12/99) |
| (2-16) - SICKLE DRIVE ASSEMBLY | (8820) - SHIFTABLE DRAPER GRAIN HEADER (21, 25 & 30 FT.) (12/91-12/99) |
| (9-04) - GAUGE WHEEL KIT, HK60612 GAUGE WHEEL KIT COMPLETE, TO BE ORDERED THRU WHOLEGOODS ONLY | (8820) - SHIFTABLE DRAPER GRAIN HEADER (21, 25 & 30 FT.) (12/91-12/99) |
| (2-10) - SICKLE DRIVE ASSEMBLY | (8830) - DRAPER HEADER (15, 18 & 21 FT.) S/N CFH0030159 & AFTER (4/91-12/99) |
| (9-010) - GAUGE WHEEL KIT, HK60612 GAUGE WHEEL KIT COMPLETE, TO BE ORDERED THRU WHOLEGOODS ONLY | (8830) - DRAPER HEADER (15, 18 & 21 FT.) S/N CFH0030159 & AFTER (4/91-12/99) |
| (9-024) - HAY CONDITIONER DRIVE ASSEMBLY | (8830) - DRAPER HEADER (15, 18 & 21 FT.) S/N CFH0030159 & AFTER (4/91-12/99) |
| (9-042) - HAY CONDITIONER DRIVE ASSEMBLY | (8830) - DRAPER HEADER (15, 18 & 21 FT.) S/N CFH0030159 & AFTER (4/91-12/99) |
| (2-10) - SICKLE DRIVE ASSEMBLY | (8840) - DRAPER HEADER (15, 18 & 21 FT.) (1/88-12/99) |
| (9-010) - GAUGE WHEEL KIT, HK60612 GAUGE WHEEL KIT COMPLETE, TO BE ORDERED THRU WHOLEGOODS ONLY | (8840) - DRAPER HEADER (15, 18 & 21 FT.) (1/88-12/99) |
| (9-024) - HAY CONDITIONER DRIVE ASSEMBLY | (8840) - DRAPER HEADER (15, 18 & 21 FT.) (1/88-12/99) |
| (9-042) - HAY CONDITIONER DRIVE ASSEMBLY | (8840) - DRAPER HEADER (15, 18 & 21 FT.) (1/88-12/99) |
| (6-06) - REEL LIFT ASSEMBLY | (325) - MULTI-CROP HEADER (1/98-12/01) |
| (02-036) - HAY CONDITIONER DRIVE ASSEMBLY (14 FOOT) | (525) - AUGER HEADER (14 FT.) (1/94-12/00) |
| (2-10) - AUGER DRIVE ASSEMBLY, LEFT | (625) - AUGER HEADER (14 FT.) (1/94-12/99) |
| (2-16) - AUGER DRIVE ASSEMBLY, RIGHT | (625) - AUGER HEADER (14 FT.) (1/94-12/99) |
| (2-24) - DRIVE ASSEMBLY, 14 FOOT | (625) - AUGER HEADER (14 FT.) (1/94-12/99) |
| (2-26) - DRIVE ASSEMBLY, 16 FOOT | (625) - AUGER HEADER (14 FT.) (1/94-12/99) |
| (2-28) - DRIVE ASSEMBLY, 18 FOOT | (625) - AUGER HEADER (14 FT.) (1/94-12/99) |
| (2-10) - AUGER DRIVE ASSEMBLY, LEFT | (625) - AUGER HEADER (16 FT.) (1/94-12/99) |
| (2-16) - AUGER DRIVE ASSEMBLY, RIGHT | (625) - AUGER HEADER (16 FT.) (1/94-12/99) |
| (2-26) - DRIVE ASSEMBLY, 16 FOOT | (625) - AUGER HEADER (16 FT.) (1/94-12/99) |
| (2-10) - AUGER DRIVE ASSEMBLY, LEFT | (625) - AUGER HEADER (18 FT.) (1/94-12/99) |
| (2-16) - AUGER DRIVE ASSEMBLY, RIGHT | (625) - AUGER HEADER (18 FT.) (1/94-12/99) |
| (2-28) - DRIVE ASSEMBLY, 18 FOOT | (625) - AUGER HEADER (18 FT.) (1/94-12/99) |
| (2-02) - MAIN DRIVE ASSEMBLY | (8309) - CASE IH 9FT ROTARY MOWER CONDITIONER (1/93-12/01) |
| (7-06) - HITCH ASSEMBLY, SWIVEL | (8312) - CASE IH 12FT ROTARY MOWER CONDITIONER (1/92-12/01) |
| (2-20) - HEADER DRIVE ASSEMBLY, SECONDARY LEFT, S.N. CFH0104001 THRU CFH0104075 | (8315) - CASE IH 15FT ROTARY MOWER CONDITIONER (1/95-12/99) |
| (2-22) - HEADER DRIVE ASSEMBLY, SECONDARY LEFT, S.N. CFH0104076 AND LATER | (8315) - CASE IH 15FT ROTARY MOWER CONDITIONER (1/95-12/99) |
| (2-24) - HEADER DRIVE ASSEMBLY, SECONDARY RIGHT, S.N. CFH0104001 THRU CFH0104075 | (8315) - CASE IH 15FT ROTARY MOWER CONDITIONER (1/95-12/99) |
| (2-26) - HEADER DRIVE ASSEMBLY, SECONDARY RIGHT, S.N. CFH0104076 AND LATER | (8315) - CASE IH 15FT ROTARY MOWER CONDITIONER (1/95-12/99) |
| (7-04) - HITCH ASSEMBLY | (8315) - CASE IH 15FT ROTARY MOWER CONDITIONER (1/95-12/99) |
| (2-18) - HEADER DRIVE ASSEMBLY, MAIN | (DC515) - CASE IH PULL-TYPE ROTARY MOWER CONDITIONER (1/98-12/00) |
| (7-04) - HITCH ASSEMBLY | (DC515) - CASE IH PULL-TYPE ROTARY MOWER CONDITIONER (1/98-12/00) |
| (9-04) - TONGUE AND JACK | (3309) - CASE IH MOWER CONDITIONER (3/89-12/92) |
| (3-06) - SICKLE SWAYBAR ASSEMBLY, RIGHT AND LEFT, SERIAL NUMBER CFH0009501 THRU CFH0009781 | (8380) - CASE IH CENTER PIVOT MOWER CONDITIONER (1/88-12/97) |
| (2-36) - HAY CONDITIONER DRIVE ASSEMBLY (14 FOOT) | (SC414) - CASE IH CENTER PIVOT MOWER CONDITIONER (1/99-12/00) |
| (2-10) - AUGER DRIVE ASSEMBLY, LEFT | (SC414) - CASE IH DELUXE CENTER PIVOT MOWER CONDITIONER (1/99-12/00) |
| (2-12) - AUGER DRIVE ASSEMBLY, RIGHT | (SC414) - CASE IH DELUXE CENTER PIVOT MOWER CONDITIONER (1/99-12/00) |
| (2-24) - DRIVE ASSEMBLY, 14 FOOT | (SC414) - CASE IH DELUXE CENTER PIVOT MOWER CONDITIONER (1/99-12/00) |
| (2-10) - AUGER DRIVE ASSEMBLY, LEFT | (SC416) - CASE IH DELUXE CENTER PIVOT MOWER CONDITIONER (5/99-12/00) |
| (2-12) - AUGER DRIVE ASSEMBLY, RIGHT | (SC416) - CASE IH DELUXE CENTER PIVOT MOWER CONDITIONER (5/99-12/00) |
| (2-26) - DRIVE ASSEMBLY, 16 FOOT | (SC416) - CASE IH DELUXE CENTER PIVOT MOWER CONDITIONER (5/99-12/00) |
| (5-04) - HAY CONDITIONER PANEL ASSEMBLIES, LEFT AND RIGHT | (8350) - CASE IH MOWER CONDITIONER (1/88-12/97) |
| (15.01) - CONDITIONER ROLLS & TENSION | (SMX91) - SICKLE MOWER CONDITIONER (9/01-1/07) |
| (2-02) - HEADER DRIVE ASSEMBLY, LEFT, SERIAL NUMBER CFH0100001 THRU CFH0100085 | (8850) - SELF-PROPELLED ROTARY HEADER (1/88-12/00) |
| (2-04) - HEADER DRIVE ASSEMBLY, LEFT, SERIAL NUMBER CFH01000086 AND LATER | (8850) - SELF-PROPELLED ROTARY HEADER (1/88-12/00) |
| (2-06) - HEADER DRIVE ASSEMBLY, RIGHT, SERIAL NUMBER CFH0100001 THRU CFH0100085 | (8850) - SELF-PROPELLED ROTARY HEADER (1/88-12/00) |
| (2-08) - HEADER DRIVE ASSEMBLY, RIGHT, SERIAL NUMBER CFH0100086 AND LATER | (8850) - SELF-PROPELLED ROTARY HEADER (1/88-12/00) |
| (040A[01]) - HEADER SPRINGS & ADJUSTABLE HEADER FLOAT KITS, SINGLE & DUAL | (WDX1101) - CASE IH SELF PROPELLED WINDROWER TRACTOR (10/01-11/04) |
| (040A[01]) - HEADER SPRINGS & ADJUSTABLE HEADER FLOAT KITS, SINGLE & DUAL | (WDX1701) - CASE IH SELF PROPELLED WINDROWER TRACTOR (11/01-11/04) |
| (040A[01]) - HEADER SPRINGS & ADJUSTABLE HEADER FLOAT KITS, SINGLE & DUAL | (WDX901) - CASE IH SELF PROPELLED WINDROWER TRACTOR (12/01-11/04) |
| (08.05) - ENGINE HOOD | (WDX1002S) - CASE IH SELF PROPELLED WINDROWER TRACTOR (3/05-8/07) |
| (08.05) - ENGINE HOOD | (WDX1202) - CASE IH SELF PROPELLED WINDROWER TRACTOR (3/05-8/07) |
| (08.05) - ENGINE HOOD | (WDX1202S) - CASE IH SELF PROPELLED WINDROWER TRACTOR (3/05-8/07) |
| (08.05) - ENGINE HOOD | (WDX1902) - CASE IH SELF PROPELLED WINDROWER TRACTOR (1/05-8/07) |
| (08.05) - ENGINE HOOD | (WDX2302) - CASE IH SELF PROPELLED WINDROWER TRACTOR (1/05-12/09) |
| (F-006) - HAY CONDITIONER, LOWER HAY CONDITIONER RUBBER ROLL ASSEMBLY | (201) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/61-12/66) |
| (P-05) - HAY CONDITIONER, HAY CONDITIONER LOWER STEEL ROLL ASSY, FOR USE W/10-1/2' PLATFORM & PICK-UP REEL | (210) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/69-12/74) |
| (17-04) - MOUNTED EQUIPMENT, CONDITIONER DRIE | (230) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/71-12/76) |
| (9B-54) - HAMMERMILL SHAFT, 1350 MACHINES | (1350) - CASE IH GRINDER-MIXER (1/78-12/86) |
| (9-12) - MOUNTING SUPPORTS AND RAILS, 10QA LOADER | (10QA) - CASE IH LOADER (4/87-12/88) |
| (E-05) - FRAME AND BRACKETS | (2250) - INTERNATIONAL LOADER (1/74-12/86) |
| (E-04) - FRAME AND BRACKETS | (2250) - INTERNATIONAL LOADER (1/74-12/86) |
| (17-03) - MOUNTED EQUIPMENT, FRONT PTO ATT | (4125) - INTERNATIONAL HARVESTER COMPACT LOADER (1/79-12/81) |
| (13-1) - SUPERSTRUCTURE | (4130) - INTERNATIONAL HARVESTER COMPACT LOADER (1/77-12/80) |
| (9-10) - REAR COUNTERWEIGHT AND SWING OUT DOOR, DIESEL MODELS | (1818) - CASE UNI-LOADER SKID STEER LOADER (AFTER S/N JAF0069386) (1/91-12/97) |
| (9-12) - REAR COUNTERWEIGHT AND SWING OUT DOOR, GASOLINE MODELS | (1818) - CASE UNI-LOADER SKID STEER LOADER (AFTER S/N JAF0069386) (1/91-12/97) |
| (9-10) - REAR COUNTERWEIGHT AND SWING OUT DOOR | (1825) - CASE UNI-LOADER SKID STEER LOADER (S/N JAF0069587 & AFTER) (7/90-12/97) |
| (9-22) - REAR COUNTERWEIGHT AND SWING OUT DOOR | (1835C) - CASE UNI-LOADER SKID STEER LOADER (7/87-12/95) |
| (09-20) - COUNTERWEIGHTS, REAR - DOOR, REAR SWING-OUT | (1845C) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/85-12/01) |
| (02-022) - GEARBOX MOUNTING ASSEMBLY | (8576) - CASE IH BALER AND ACCUMULATOR (1/98-12/00) |
| (07-19) - DRIVE TRAIN, FRONT AXLE CENTER FRAME, 4386 TRACTOR | (4386) - INTERNATIONAL 4WD DIESEL TRACTOR (1/76-12/81) |
| (5-26) - STUB AXLE AND FRONT HUBS | (1210) - DAVID BROWN DIESEL TRACTOR (S/N 11150001 & AFTER) (1/76-1/80) |
| (5-26) - STUB AXLE AND FRONT HUBS | (1212) - DAVID BROWN DIESEL TRACTOR (S/N 11150001 & AFTER) (1/76-12/80) |
| (15-09) - WHEELS AND TRACTION, REAR WHEEL WEIGHTS, SOLID TYPE | (HYDRO 84) - INTERNATIONAL HYDROSTATIC DRIVE TRACTOR (NA) (1/78-12/81) |
| (09-06) - FRAME, STABILIZER, THREE POINT HITCH, ROW CROP TRACTORS WITH INSIDE CHECK CHAINS | (HYDRO 84) - INTERNATIONAL HYDROSTATIC DRIVE TRACTOR (NA) (1/78-12/81) |
| (09-02) - FRAME, THREE POINT HITCH | (2400) - INTERNATIONAL SERIES-A TRACTOR (NORTH AMERICA) (1/71-12/73) |
| (09-01) - FRAME, THREE POINT HITCH | (2500) - INTERNATIONAL SERIES-A TRACTOR (NORTH AMERICA) (1/71-12/77) |
| (09-02) - FRAME, THREE POINT HITCH | (454) - INTERNATIONAL SERIES-A TRACTOR (NORTH AMERICA) (1/71-12/73) |
| (09-01) - FRAME, THREE POINT HITCH | (574) - INTERNATIONAL SERIES-A TRACTOR (NORTH AMERICA) (1/70-12/77) |
| (B-33) - POWER TRAIN, FINAL DRIVE, COUNTERSHAFT AND CARRIER, TRACTORS WITH COTTON PICKER | (706) - INTERNATIONAL TRACTOR (1/63-12/67) |
| (9-048) - FRONT FENDERS, MFD TRACTOR, PRIOR TO P.I.N. JJA0016108 | (7110) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (10/87-12/93) |
| (9-050) - FRONT FENDERS, MFD TRACTOR, P.I.N. JJA0016108 THROUGH JJA0021778 | (7110) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (10/87-12/93) |
| (9-052) - FRONT FENDERS, MFD TRACTOR, P.I.N. JJA0021779 AND AFTER | (7110) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (10/87-12/93) |
| (9-048) - FRONT FENDERS, MFD TRACTOR, PRIOR TO P.I.N. JJA0016108 | (7120) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (10/87-12/93) |
| (9-050) - FRONT FENDERS, MFD TRACTOR, P.I.N. JJA0016108 THROUGH JJA0021778 | (7120) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (10/87-12/93) |
| (9-052) - FRONT FENDERS, MFD TRACTOR, P.I.N. JJA0021779 AND AFTER | (7120) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (10/87-12/93) |
| (9-052) - FRONT FENDERS, MFD TRACTOR, PRIOR TO P.I.N. JJA0016108 | (7130) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (10/87-12/93) |
| (9-054) - FRONT FENDERS, MFD TRACTOR, P.I.N. JJA0016108 THROUGH JJA0021778 | (7130) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (10/87-12/93) |
| (9-056) - FRONT FENDERS, MFD TRACTOR, P.I.N. JJA0021779 AND AFTER | (7130) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (10/87-12/93) |
| (9-052) - FRONT FENDERS, MFD TRACTOR, PRIOR TO P.I.N. JJA0016108 | (7140) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (10/87-12/93) |
| (9-054) - FRONT FENDERS, MFD TRACTOR, P.I.N. JJA0016108 THROUGH JJA0021778 | (7140) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (10/87-12/93) |
| (9-056) - FRONT FENDERS, MFD TRACTOR, P.I.N. JJA0021779 AND AFTER | (7140) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (10/87-12/93) |
| (9-052) - FRONT FENDERS, MFD TRACTOR, PRIOR TO P.I.N. JJA0016108 | (7150) - CASE IH MAGNUM TRACTOR (1/87-12/93) |
| (9-054) - FRONT FENDERS, MFD TRACTOR, P.I.N. JJA0016108 THROUGH JJA0021778 | (7150) - CASE IH MAGNUM TRACTOR (1/87-12/93) |
| (9-056) - FRONT FENDERS, MFD TRACTOR, P.I.N. JJA0021779 AND AFTER | (7150) - CASE IH MAGNUM TRACTOR (1/87-12/93) |
| (9-044) - FRONT FENDERS | (7210) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (1/94-12/96) |
| (9-044) - FRONT FENDERS | (7220) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (1/94-12/96) |
| (9-044) - FRONT FENDERS, MFD TRACTOR | (7230) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (1/94-12/96) |
| (9-044) - FRONT FENDERS, MFD TRACTOR | (7240) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (1/94-12/96) |
| (9-044) - FRONT FENDERS, MFD TRACTOR | (7250) - CASE IH MAGNUM TRACTOR (NORTH AMERICA) (1/94-12/96) |
| (9-032) - FRONT FENDERS, MFD TRACTOR | (8910) - CASE IH MAGNUM TRACTOR (1/97-12/98) |
| (9-032) - FRONT FENDERS, MFD TRACTOR | (8920) - CASE IH MAGNUM TRACTOR (1/97-12/98) |
| (9-032) - FRONT FENDERS, MFD TRACTOR | (8930) - CASE IH MAGNUM TRACTOR (1/97-12/98) |
| (9-032) - FRONT FENDERS, MFD TRACTOR | (8940) - CASE IH MAGNUM TRACTOR (1/97-12/98) |
| (9-032) - FRONT FENDERS, MFD TRACTOR | (8950) - CASE IH MAGNUM TRACTOR (1/97-12/98) |
| (14-12) - SUSPENSION, ADJUSTABLE WIDE TREAD FRONT AXLE AND CONNECTIONS, INTERNATIONAL TRACTORS | (1026) - INTERNATIONAL DIESEL TRACTOR (1/70-12/88) |
| (14-12) - SUSPENSION, ADJUSTABLE WIDE TREAD FRONT AXLE AND CONNECTIONS, INTERNATIONAL TRACTORS | (21026) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/69-12/88) |
| (13-02) - SUPERSTRUCTURE, FRONT FENDERS FOR ALL WHEEL DRIVE TRACTORS | (5088) - INTERNATIONAL DIESEL TRACTOR (1/81-12/87) |
| (13-02) - SUPERSTRUCTURE, FRONT FENDERS FOR ALL WHEEL DRIVE TRACTORS | (5288) - INTERNATIONAL DIESEL TRACTOR (1/81-12/87) |
| (13-02) - SUPERSTRUCTURE, FRONT FENDERS FOR ALL WHEEL DRIVE TRACTORS | (5488) - INTERNATIONAL DIESEL TRACTOR (1/81-12/87) |
| (8-028) - HYDRAULIC COUPLERS AND LINES, 9250 TRACTOR (CONT'D) | (9250) - CASE IH STEIGER 4WD TRACTOR (9/90-5/95) |
| (9-394) - FOUR POST ROLL OVER PROTECTIVE STRUCTURE, NORTH AMERICA ONLY | (1594) - CASE DIESEL TRACTOR (1/85-12/87) |
| (4-14) - CHASSIS, FRONT AXLE | (2300) - INTERNATIONAL TRACTOR (1/71-12/74) |
| (9-806) - SWINGING DRAWBAR | (248) - CASE IH INDUSTRIAL TRACTOR (S/N 1591 & ON) (1/86-12/90) |
| (B-33) - POWER TRAIN, FINAL DRIVE, COUNTERSHAFT AND CARRIER, TRACTORS WITH COTTON PICKER | (2706) - INTERNATIONAL INDUSTRIAL TRACTOR (1/63-12/67) |
| (5-04) - HYDRAULIC PUMP AND CONTROL VALVE, HYDRAULIC LIFT ATTACHMENT | (276) - INTERNATIONAL TRACTOR (1/89-12/90) |
| (09-020) - SWINGING DRAWBAR | (278) - INTERNATIONAL TRACTOR (1/78-12/81) |
| (4-14) - CHASSIS, FRONT AXLE | (354) - INTERNATIONAL TRACTOR (1/72-12/74) |
| (6-21) - ATTACHMENTS, POWER STEERING AND FRONT AXLE ATTACHMENT, FRONT AXLE, EXTENSION AND STAY ROD | (364) - INTERNATIONAL TRACTOR (1/75-12/76) |
| (4-09) - CHASSIS, FRONT AXLE | (364) - INTERNATIONAL TRACTOR (1/75-12/76) |
| (9-338) - SWINGING DRAWBAR | (385) - CASE IH TRACTOR (P.I.N. 5001 TO 5287 & P.I.N. 18001 & AFTER) (1/86-12/90) |
| (00J17) - SWINGING DRAWBAR | (385) - INTERNATIONAL DIESEL TRACTOR (EUROPE) (1/84-12/90) |
| (09-02) - FRAME, SWINGING DRAWBAR, MACHINES FITTED WITH THREE POINT HITCH | (385) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/85-12/90) |
| (14-02) - FRONT AXLE - V-VERSION | (433) - INTERNATIONAL DIESEL TRACTOR (1/75-12/85) |
| (13-06) - FENDERS | (433) - INTERNATIONAL DIESEL TRACTOR (1/75-12/85) |
| (5-230) - POWER STEERING | (433) - INTERNATIONAL DIESEL TRACTOR W/SILENT 85 CAB (1/74-12/90) |
| (6-047) - FRONT AXLE, EXTENSION AND STAY ROD - ATTACHMENTS | (434) - MCCORMICK-INTERNATIONAL DIESEL TRACTOR (1/64-12/72) |
| (09-01) - FRAME, THREE POINT HITCH | (464) - INTERNATIONAL TRACTOR (1/73-12/73) |
| (09-10) - SWINGING DRAWBAR | (474) - INTERNATIONAL DIESEL TRACTOR (1/73-12/74) |
| (00J17) - SWINGING DRAWBAR | (484) - INTERNATIONAL DIESEL TRACTOR (EUROPE) (1/78-12/81) |
| (15-04) - WHEELS AND TRACTION, REAR WHEEL WEIGHTS, SOLID TYPE | (484) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/78-12/81) |
| (9-416) - THREE POINT HITCH STABILIZER | (485) - CASE IH TRACTOR (1/85-12/90) |
| (00J17) - SWINGING DRAWBAR | (485) - INTERNATIONAL DIESEL TRACTOR (1/81-12/85) |
| (6-094) - REAR WHEEL WEIGHTS, SOLID TYPE | (495) - CASE IH TRACTOR (NORTH AMERICA) (1/91-12/94) |
| (9-054) - SWINGING DRAWBAR | (495) - CASE IH TRACTOR (NORTH AMERICA) (1/91-12/94) |
| (14-02) - FRONT AXLE - V-VERSION | (533) - INTERNATIONAL DIESEL TRACTOR (1/75-12/85) |
| (13-06) - FENDERS | (533) - INTERNATIONAL DIESEL TRACTOR (1/75-12/85) |
| (5-230) - POWER STEERING | (533) - INTERNATIONAL DIESEL TRACTOR W/SILENT 85 CAB (1/74-12/85) |
| (312) - DRAW FRAME | (553) - INTERNATIONAL TRACTOR (1/72-12/74) |
| (15-08) - REAR WHEEL WEIGHTS, SOLID TYPE | (584) - INTERNATIONAL TRACTOR (NORTH AMERICA) (1/78-12/84) |
| (09-11) - THREE POINT HITCH STABILIZER, ROW CROP TRACTORS | (584) - INTERNATIONAL TRACTOR (NORTH AMERICA) (1/78-12/84) |
| (6-372) - REAR WHEEL WEIGHTS, SOLID TYPE, 28 AND 30 INCH ATTACHED 8 RIM CLAMP WHEELS | (585) - CASE IH TRACTOR (1/85-12/90) |
| (9-610) - STABILIZER, THREE POINT HITCH | (585) - CASE IH TRACTOR (1/85-12/90) |
| (6-134) - REAR WHEEL WEIGHTS, SOLID TYPE | (595) - CASE IH TRACTOR (NORTH AMERICA) (1/91-12/94) |
| (9-124) - SWINGING DRAWBAR | (595) - CASE IH TRACTOR (NORTH AMERICA) (1/91-12/94) |
| (9-126) - STABILIZER, THREE POINT HITCH | (595) - CASE IH TRACTOR (NORTH AMERICA) (1/91-12/94) |
| (5-230) - POWER STEERING | (633) - INTERNATIONAL DIESEL TRACTOR W/SILENT 85 CAB (1/75-12/85) |
| (14-02) - FRONT AXLE - V-VERSION | (633) - INTERNATIONAL TRACTOR (1/75-12/84) |
| (13-06) - FENDERS | (633) - INTERNATIONAL TRACTOR (1/75-12/84) |
| (3H08) - ROD, TIE, MECHANICAL STEERING | (644) - INTERNATIONAL DIESEL TRACTOR (1/74-12/81) |
| (2E01) - DRAWBAR, FRAME | (644) - INTERNATIONAL DIESEL TRACTOR (1/74-12/81) |
| (312) - DRAW FRAME | (654) - INTERNATIONAL TRACTOR (1/72-12/74) |
| (07-01) - DRIVE TRAIN, CLUTCH HOUSING, 666 AND 686 GEAR DRIVE TRACTORS | (666) - INTERNATIONAL GEAR DRIVE TRACTOR (1/72-12/72) |
| (09-01) - FRAME, THREE POINT HITCH | (674) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/73-12/77) |
| (15-09) - WHEELS AND TRACTION, REAR WHEEL WEIGHTS, SOLID TYPE | (684) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/78-1/84) |
| (09-06) - FRAME, STABILIZER, THREE POINT HITCH, ROW CROP TRACTORS WITH INSIDE CHECK CHAINS | (684) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/78-1/84) |
| (6-304) - REAR WHEEL WEIGHT | (685) - CASE IH DIESEL TRACTOR (1/86-12/90) |
| (9-804) - THREE POINT HITCH STABILIZER | (685) - CASE IH DIESEL TRACTOR (1/86-12/90) |
| (9-826) - SWINGING DRAWBAR | (685) - CASE IH DIESEL TRACTOR (1/86-12/90) |
| (07-01) - DRIVE TRAIN, CLUTCH HOUSING, 666 AND 686 GEAR DRIVE TRACTORS | (686) - INTERNATIONAL GEAR DRIVE TRACTOR (1/76-12/80) |
| (6-128) - REAR WHEEL WEIGHTS, SOLID TYPE, 28, 30 AND 34 INCH WHEELS | (695) - CASE IH TRACTOR (NORTH AMERICA) (1/91-12/94) |
| (9-124) - SWINGING DRAWBAR | (695) - CASE IH TRACTOR (NORTH AMERICA) (1/91-12/94) |
| (9-126) - STABILIZER, THREE POINT HITCH | (695) - CASE IH TRACTOR (NORTH AMERICA) (1/91-12/94) |
| (312) - DRAW FRAME | (724) - INTERNATIONAL DIESEL TRACTOR (1/67-12/74) |
| (5-230) - POWER STEERING | (733) - INTERNATIONAL DIESEL TRACTOR W/SILENT 85 CAB (1/80-12/85) |
| (14-02) - FRONT AXLE - V-VERSION | (733) - INTERNATIONAL TRACTOR (1/80-12/85) |
| (13-06) - FENDERS | (733) - INTERNATIONAL TRACTOR (1/80-12/85) |
| (3H08) - ROD, TIE, MECHANICAL STEERING | (744) - INTERNATIONAL DIESEL TRACTOR (1/74-1/81) |
| (2E01) - DRAWBAR, FRAME | (744) - INTERNATIONAL DIESEL TRACTOR (1/74-1/81) |
| (09-020) - SWINGING DRAWBAR | (784) - INTERNATIONAL DIESEL TRACTOR (EUROPE) (1/78-12/81) |
| (15-09) - WHEELS AND TRACTION, REAR WHEEL WEIGHTS, SOLID TYPE | (784) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/78-12/81) |
| (09-06) - FRAME, THREE POINT HITCH STABILIZER, ROW CROP TRACTORS | (784) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/78-12/81) |
| (09-020) - SWINGING DRAWBAR | (785) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (312) - DRAW FRAME | (824) - INTERNATIONAL DIESEL TRACTOR (1/72-12/74) |
| (5-230) - POWER STEERING | (833) - INTERNATIONAL DIESEL TRACTOR W/SILENT 85 CAB (1/81-12/85) |
| (14-02) - FRONT AXLE - V-VERSION | (833) - INTERNATIONAL TRACTOR (1/81-12/85) |
| (13-06) - FENDERS | (833) - INTERNATIONAL TRACTOR (1/81-12/85) |
| (3H08) - ROD, TIE, MECHANICAL STEERING | (844) - INTERNATIONAL DIESEL TRACTOR (1/74-12/80) |
| (2E01) - DRAWBAR, FRAME | (844) - INTERNATIONAL DIESEL TRACTOR (1/74-12/80) |
| (14-15) - ROD, TIE, MECHANICAL STEERING | (844S) - INTERNATIONAL DIESEL TRACTOR (S/N 018000 & AFTER) (1/82-12/93) |
| (09-02) - DRAWBAR, FRAME | (844S) - INTERNATIONAL DIESEL TRACTOR (S/N 018000 & AFTER) (1/82-12/93) |
| (15-09) - REAR WHEEL WEIGHTS, SOLID TYPE | (884) - INTERNATIONAL TRACTOR (NORTH AMERICA) (1/79-12/84) |
| (09-05) - 3 POINT HITCH STABILIZER, UTILITY AND ALL WHEEL DRIVE TRACTORS | (884) - INTERNATIONAL TRACTOR (NORTH AMERICA) (1/79-12/84) |
| (9-546) - STABILIZER, THREE POINT HITCH | (885) - CASE IH TRACTOR (NORTH AMERICA) (1/85-12/90) |
| (6-124) - REAR WHEEL WEIGHTS, SOLID TYPE, 28, 30 AND 34 INCH ATTACHED 8 RIM CLAMP WHEEL | (895) - CASE IH TRACTOR (NORTH AMERICA) (1/91-12/94) |
| (9-122) - STABILIZER, THREE POINT HITCH | (895) - CASE IH TRACTOR (NORTH AMERICA) (1/91-12/94) |
| (9-124) - SWINGING DRAWBAR | (895) - CASE IH TRACTOR (NORTH AMERICA) (1/91-12/94) |
| (6-126) - REAR WHEEL WEIGHTS, SOLID TYPE | (995) - CASE IH TRACTOR (1/91-12/94) |
| (9-114) - STABILIZER, THREE POINT HITCH | (995) - CASE IH TRACTOR (1/91-12/94) |
| (9-116) - SWINGING DRAWBAR | (995) - CASE IH TRACTOR (1/91-12/94) |
| (103) - HYDRAULIC ATTACHMENTS, HYDRAULIC LIFT ATTACHMENT, HYDRAULIC PUMP & CONTROL VALVE | (B275) - MCCORMICK-INTERNATIONAL DIESEL TRACTOR (1/59-12/64) |
| (066) - CHASSIS, FRONT AXLE | (B275) - MCCORMICK-INTERNATIONAL DIESEL TRACTOR (1/59-12/64) |
| (292) - CHASSIS, ADJUSTABLE FRONT AXLE, LOWER BOLSTER, STAY ROD AND STEERING CONNECTIONS | (400-SERIES) - FARMALL DIESEL TRACTORS (1/54-12/56) |
| (292) - CHASSIS, ADJUSTABLE FRONT AXLE, LOWER BOLSTER, STAY ROD AND STEERING CONNECTIONS | (400-SERIES) - FARMALL GAS TRACTORS (1/54-12/56) |
| (292) - CHASSIS, ADJUSTABLE FRONT AXLE, LOWER BOLSTER, STAY ROD AND STEERING CONNECTIONS | (450-SERIES) - FARMALL DIESEL TRACTORS (1/56-12/58) |
| (292) - CHASSIS, ADJUSTABLE FRONT AXLE, LOWER BOLSTER, STAY ROD AND STEERING CONNECTIONS | (450-SERIES) - FARMALL GAS TRACTORS (1/56-12/58) |
| (B-33) - POWER TRAIN, FINAL DRIVE, COUNTERSHAFT AND CARRIER, TRACTORS WITH COTTON PICKER | (706) - FARMALL TRACTOR (1/63-12/67) |
