| Узел | Модель |
|---|
| (023) - KNOTTER DRIVE, PART 1 | (590) - NH BIG BALER (2/97-12/99) |
| (023) - KNOTTER DRIVE, PART 1 | (590C) - NH BIG BALER W/CUTTER (2/98-12/99) |
| (023) - KNOTTER DRIVE, PART 1 | (595) - NH BIG BALER (2/97-12/99) |
| (23[01]) - KNOTTERS TRANSMISSION | (D1010) - BIG RECTANGULAR BALER - BELGIUM (10/93-11/95) |
| (23[01]) - KNOTTERS TRANSMISSION | (D1010C) - BIG RECTANGULAR BALER / CUTTER (1/97-5/99) |
| (23[01]) - KNOTTERS TRANSMISSION | (D1010S) - BIG RECTANGULAR BALER / SILAGE (11/95-6/99) |
| (23[01]) - KNOTTERS TRANSMISSION | (D1210S) - BIG RECTANGULAR BALER / SILAGE (11/95-6/99) |
| (09.01) - GEARSHIFT CONTROLS | (FX25) - NH SP FORAGE HARVESTER (2/96-) |
| (09.30) - SPINDLES, 4WD | (FX25) - NH SP FORAGE HARVESTER (2/96-) |
| (09.01) - GEARSHIFT CONTROLS | (FX45) - NH SP FORAGE HARVESTER (2/96-) |
| (09.30) - SPINDLES, 4WD | (FX45) - NH SP FORAGE HARVESTER (2/96-) |
| (09.01[01]) - GEARSHIFT CONTROLS | (FX28) - SELF-PROPELLED FORAGE HARVESTER (9/98-) |
| (09.30[01]) - MECHANICAL 4-WHEEL DRIVE, AXLE | (FX28) - SELF-PROPELLED FORAGE HARVESTER (9/98-) |
| (09.01[01]) - GEARSHIFT CONTROLS | (FX38) - SELF-PROPELLED FORAGE HARVESTER (9/98-) |
| (09.30[01]) - MECHANICAL 4-WHEEL DRIVE, AXLE | (FX38) - SELF-PROPELLED FORAGE HARVESTER (9/98-) |
| (09.01[01]) - GEARSHIFT CONTROLS | (FX48) - SELF-PROPELLED FORAGE HARVESTER (9/98-) |
| (09.30[01]) - MECHANICAL 4-WHEEL DRIVE, AXLE | (FX48) - SELF-PROPELLED FORAGE HARVESTER (9/98-) |
| (09.01[01]) - GEARSHIFT CONTROLS | (FX58) - SELF-PROPELLED FORAGE HARVESTER (9/98-) |
| (09.30[01]) - MECHANICAL 4-WHEEL DRIVE, AXLE | (FX58) - SELF-PROPELLED FORAGE HARVESTER (9/98-) |
| (03.01[01]) - GEARSHIFT CONTROLS | (FX30) - SELF-PROPELLED FORAGE HARVESTER (1/02-) |
| (05.05[01]) - MECHANICAL 4-WHEEL DRIVE, AXLE | (FX30) - SELF-PROPELLED FORAGE HARVESTER (1/02-) |
| (03.01[01]) - GEARSHIFT CONTROLS | (FX40) - SELF-PROPELLED FORAGE HARVESTER (1/02-) |
| (05.05[01]) - MECHANICAL 4-WHEEL DRIVE, AXLE | (FX40) - SELF-PROPELLED FORAGE HARVESTER (1/02-) |
| (03.01[01]) - GEARSHIFT CONTROLS | (FX50) - SELF-PROPELLED FORAGE HARVESTER (1/02-) |
| (05.05[01]) - MECHANICAL 4-WHEEL DRIVE, AXLE | (FX50) - SELF-PROPELLED FORAGE HARVESTER (1/02-) |
| (03.01[01]) - GEARSHIFT CONTROLS | (FX60) - SELF-PROPELLED FORAGE HARVESTER (1/02-) |
| (05.05[01]) - MECHANICAL 4-WHEEL DRIVE, AXLE | (FX60) - SELF-PROPELLED FORAGE HARVESTER (1/02-) |
| (015) - GEARBOX, CLUTCH & BRAKES | (1400) - NH COMBINE - BASE UNIT (7/74-7/78) |
| (014) - FEED TABLE CLUTCH LEVER | (1400) - NH COMBINE - BASE UNIT (7/74-7/78) |
| (030) - CYLINDER VARI-DRIVE & CONTROL LEVER GROUP | (1400) - NH COMBINE - BASE UNIT (7/74-7/78) |
| (016) - GEARBOX, CLUTCH & BRAKES | (1500) - NH COMBINE - BASE UNIT (7/73-7/79) |
| (015) - FEED TABLE CLUTCH LEVER | (1500) - NH COMBINE - BASE UNIT (7/73-7/79) |
| (031) - CYLINDER VARI-DRIVE & CONTROL LEVER | (1500) - NH COMBINE - BASE UNIT (7/73-7/79) |
| (50[01]) - STRAW WALKER SHAFTS AND BEARINGS | (8060) - COMBINE - BASE UNIT (1/78-12/89) |
| (58[01]) - TAILINGS ELEVATOR DRIVE GROUP | (8060) - COMBINE - BASE UNIT (1/78-12/89) |
| (60[01]) - GRAIN ELEVATOR DRIVE GROUP | (8060) - COMBINE - BASE UNIT (1/78-12/89) |
| (064) - STRAW WALKER SHAFTS AND BEARINGS | (8070) - COMBINE - BASE UNIT (1/78-12/91) |
| (072) - TAILINGS ELEVATOR DRIVE GROUP | (8070) - COMBINE - BASE UNIT (1/78-12/91) |
| (074) - GRAIN ELEVATOR DRIVE GROUP | (8070) - COMBINE - BASE UNIT (1/78-12/91) |
| (15.45[01]) - STRAW WALKER SHAFTS, BEARING | (CX8070) - C781, COMBINE (1/06-4/11) |
| (16.21[02]) - GRAINTANK, EXTENSIONS - NA ONLY - D720 | (CX8070) - C781, COMBINE (1/06-4/11) |
| (72.101.010) - STRAW WALKER SHAFTS, BEARING | (CX8070 A3) - D782, NA VERSION TIER3 COMBINES (4/11-) |
| (80.154.050) - GRAINTANK, EXTENSIONS | (CX8070 A3) - D782, NA VERSION TIER3 COMBINES (4/11-) |
| (72.101.010) - STRAW WALKER SHAFTS, BEARING | (CX8070 A4) - D782, NA VERSION TIER4 COMBINES (4/11-) |
| (80.154.050) - GRAINTANK, EXTENSIONS | (CX8070 A4) - D782, NA VERSION TIER4 COMBINES (4/11-) |
| (15.45[01]) - STRAW WALKER SHAFTS, BEARING | (CX8080) - C781, COMBINE (1/06-4/11) |
| (16.21[02]) - GRAINTANK, EXTENSIONS - NA ONLY - D720 | (CX8080) - C781, COMBINE (1/06-4/11) |
| (72.101.010) - STRAW WALKER SHAFTS, BEARING | (CX8080 A3) - D782, NA VERSION TIER3 COMBINES (4/11-) |
| (80.154.050) - GRAINTANK, EXTENSIONS | (CX8080 A3) - D782, NA VERSION TIER3 COMBINES (4/11-) |
| (72.101.010) - STRAW WALKER SHAFTS, BEARING | (CX8080 A4) - D782, NA VERSION TIER4 COMBINES (4/11-) |
| (80.154.050) - GRAINTANK, EXTENSIONS | (CX8080 A4) - D782, NA VERSION TIER4 COMBINES (4/11-) |
| (72.101.010) - STRAW WALKER SHAFTS, BEARING | (CX8080 A4) - ELEVATION COMBINE (10/13-) |
| (80.154.050) - GRAINTANK, EXTENSIONS | (CX8080 A4) - ELEVATION COMBINE (10/13-) |
| (15.45[01]) - STRAW WALKER SHAFTS, BEARING | (CX8090) - C781, COMBINE (1/06-4/11) |
| (16.21[02]) - GRAINTANK, EXTENSIONS - NA ONLY - D720 | (CX8090) - C781, COMBINE (1/06-4/11) |
| (72.101.010) - STRAW WALKER SHAFTS, BEARING | (CX8090 A4) - D782, NA VERSION TIER4 COMBINES (4/11-) |
| (80.154.050) - GRAINTANK, EXTENSIONS | (CX8090 A4) - D782, NA VERSION TIER4 COMBINES (4/11-) |
| (72.101.010) - STRAW WALKER SHAFTS, BEARING | (CX8090 A4) - ELEVATION COMBINE (10/13-) |
| (80.154.050) - GRAINTANK, EXTENSIONS | (CX8090 A4) - ELEVATION COMBINE (10/13-) |
| (10.24[01]) - OPERATOR'S PLATFORM | (CX840) - COMBINE - BASE UNIT (2/01-) |
| (15.44[01]) - STRAW WALKER SHAFTS BEARING | (CX840) - COMBINE - BASE UNIT (2/01-) |
| (10.24[01]) - OPERATOR'S PLATFORM | (CX860) - COMBINE - BASE UNIT (2/01-) |
| (15.44[01]) - STRAW WALKER SHAFTS BEARING | (CX860) - COMBINE - BASE UNIT (2/01-) |
| (10.24[01]) - OPERATOR'S PLATFORM | (CX880) - COMBINE - BASE UNIT (2/01-) |
| (15.44[01]) - STRAW WALKER SHAFTS BEARING | (CX880) - COMBINE - BASE UNIT (2/01-) |
| (070) - STRAW WALKER SHAFTS & DRIVE | (TX36) - NH COMBINE (1/88-12/94) |
| (085) - DRIVE GROUP FOR GRAIN ELEVATOR | (TX36) - NH COMBINE (1/88-12/94) |
| (04.28) - STRAW WALKER SHAFTS | (TX66) - NH CONVENTIONAL COMBINE (7/94-) |
| (05.15) - GRAIN BOTTOM AUGER | (TX66) - NH CONVENTIONAL COMBINE (7/94-) |
| (05.26) - AGITATOR IN GRAIN ELEVATOR | (TX66) - NH CONVENTIONAL COMBINE (7/94-) |
| (09.001) - GEARSHIFT CONTROLS, UPPER | (TX66) - NH CONVENTIONAL COMBINE (7/94-) |
| (04.28) - STRAW WALKER SHAFTS | (TX68) - NH CONVENTIONAL COMBINE (5/94-) |
| (05.15) - GRAIN BOTTOM AUGER | (TX68) - NH CONVENTIONAL COMBINE (5/94-) |
| (05.26) - AGITATOR IN GRAIN ELEVATOR | (TX68) - NH CONVENTIONAL COMBINE (5/94-) |
| (09.001) - GEARSHIFT CONTROLS, UPPER | (TX68) - NH CONVENTIONAL COMBINE (5/94-) |
| (20.13.09) - KNIFE DRIVE, SHORT STROKE | (88C30P) - GRAIN BELT HEADER (2/07-) |
| (20.13.09) - KNIFE DRIVE, SHORT STROKE | (88C36P) - GRAIN BELT HEADER (2/07-) |
| (20.13.09) - KNIFE DRIVE, SHORT STROKE | (88C42P) - GRAIN BELT HEADER (2/07-) |
| (4.40) - KNIFE DRIVE, SHORT STROKE, BSN K01 2001 | (92C) - RICE DRAPER HEADER |
| (4.40) - KNIFE DRIVE, SHORT STROKE, BSN K01 2001 | (94C) - GRAIN DRAPER HEADER |
| (4.41) - KNIFE DRIVE, SHORT STROKE, SN K01 2001 AND AFTER | (94C) - GRAIN DRAPER HEADER |
| (4.40) - KNIFE DRIVE, SHORT STROKE | (994) - NH DRAPER GRAIN HEADS (4/98-) |
| (20.13.09) - KNIFE DRIVE, SHORT STROKE | (88C45P) - GRAIN BELT HEADER (2/07-) |
| (80.154.010) - GRAINTANK EXTENSIONS | (CR8090 A3) - COMBINE - TIER 3 (12/11-) |
| (16.229[02]) - GRAINTANK, EXTENSIONS - D720 | (CR9080) - ELEVATION COMBINE (10/07-12/11) |
| (80.154.010) - GRAINTANK EXTENSIONS | (CR9080 A3) - TIER3 COMBINES (12/11-) |
| (10.404[01]) - OPERATOR'S PLATFORM - FOR NA ONLY | (CR920) - COMBINE - BASE UNIT (10/01-) |
| (10.404[01]) - OPERATOR'S PLATFORM - FOR NA ONLY | (CR940) - COMBINE - BASE UNIT (10/01-9/06) |
| (10.404[01]) - OPERATOR'S PLATFORM - FOR NA ONLY | (CR960) - COMBINE - BASE UNIT (10/01-9/06) |
| (10.405[01]) - OPERATOR'S PLATFORM - NOT FOR NA | (CR960) - COMBINE - BASE UNIT (10/01-9/06) |
| (10.404[01]) - OPERATOR'S PLATFORM - FOR NA ONLY | (CR970) - COMBINE - BASE UNIT (10/01-9/06) |
| (10.404[01]) - OPERATOR'S PLATFORM - FOR NA ONLY | (CR980) - COMBINE - BASE UNIT (10/01-) |
| (10.405[01]) - OPERATOR'S PLATFORM - NOT FOR NA | (CR980) - COMBINE - BASE UNIT (10/01-) |
| (80.154.010) - GRAINTANK EXTENSIONS | (CR6090 A4) - TIER4 COMBINES (12/11-) |
| (80.150.600) - GRAINTANK EXTENSIONS | (CR6090 G4) - TIER4 COMBINES (1/14-) |
| (80.154.010) - GRAINTANK EXTENSIONS | (CR7090 A4) - COMBINE - TIER 4 (12/11-) |
| (80.150.600) - GRAINTANK EXTENSIONS | (CR7090 G4) - COMBINE - TIER 4 (1/14-) |
| (80.154.010) - GRAINTANK EXTENSIONS | (CR8080 A4) - TIER4 COMBINES (12/11-) |
| (80.150.600) - GRAINTANK EXTENSIONS | (CR8080 G4) - TIER4 COMBINES (1/14-) |
| (80.154.010) - GRAINTANK EXTENSIONS | (CR8090 A4) - COMBINE - TIER 4 (12/11-) |
| (80.154.010) - GRAINTANK EXTENSIONS | (CR9090) - COMBINE - TIER 4 (NA) (12/11-) |
| (20.04.40) - KNIFE DRIVE, SHORT STROKE | (18HB) - DRAPER HEADER (3/05-) |
| (20.04.40[01]) - KNIFE DRIVE, SHORT STROKE, FROM PIN XXWS105132 | (18HB) - DRAPER HEADER (3/05-) |
| (20.04.40) - KNIFE DRIVE, SHORT STROKE | (21HB) - DRAPER HEADER (3/05-) |
| (20.04.40[01]) - KNIFE DRIVE, SHORT STROKE, FROM PIN XXWS105132 | (21HB) - DRAPER HEADER (3/05-) |
| (20.04.40) - KNIFE DRIVE, SHORT STROKE | (25HB) - DRAPER HEADER (3/05-) |
| (20.04.40[01]) - KNIFE DRIVE, SHORT STROKE, FROM PIN XXWS105132 | (25HB) - DRAPER HEADER (3/05-) |
| (20.04.40) - KNIFE DRIVE, SHORT STROKE | (30HB) - DRAPER HEADER (3/05-) |
| (20.04.40[01]) - KNIFE DRIVE, SHORT STROKE, FROM PIN XXWS105132 | (30HB) - DRAPER HEADER (3/05-) |
| (20.04.40) - KNIFE DRIVE, SHORT STROKE | (36HB) - DRAPER HEADER (3/05-) |
| (20.04.40[01]) - KNIFE DRIVE, SHORT STROKE, FROM PIN XXWS105132 | (36HB) - DRAPER HEADER (3/05-) |
| (4.40[1]) - KNIFE DRIVE, SHORT STROKE, BSN K01 2001 | (994D) - DRAPER HEADER (5/99-) |
| (4.40[2]) - KNIFE DRIVE, SHORT STROKE, ASN K01 2001 | (994D) - DRAPER HEADER (5/99-) |
| (58.110.BH) - KNIFE, DRIVE ASSY | (DURASWATH 421HB) - DRAPER HEADER (12/13-) |
| (58.110.BH) - KNIFE, DRIVE ASSY | (DURASWATH 425HB) - DRAPER HEADER (12/13-) |
| (58.110.BH) - KNIFE, DRIVE ASSY | (DURASWATH 430HB) - DRAPER HEADER (12/13-) |
| (58.110.BH) - KNIFE, DRIVE ASSY | (DURASWATH 436HB) - DRAPER HEADER (12/13-) |
| (58.110.BH) - KNIFE, DRIVE ASSY | (DURASWATH 440HB) - DRAPER HEADER (12/13-) |
