| Узел | Модель |
|---|
| (38) - SEED PRESS WHEEL, 1 X 10 | (K160) - CASE PLANTER (1/65-12/69) |
| (8-08) - LIFT CYLINDER ASSEMBLY, FOLDING FRAME, 8 ROW WIDE AND 8 ROW NARROW 3.5 ID X 16 INCH STROKE | (184) - CASE IH CULTIVATOR (1/86-12/93) |
| (8-08) - LIFT CYLINDER ASSEMBLY, FOLDING FRAME, 8 ROW WIDE AND 8 ROW NARROW | (1840) - CASE IH CULTIVATOR (1/94-12/97) |
| (04) - HITCH | (B-SERIES) - CASE DISK HARROW (1/66-12/70) |
| (06) - MAIN FRAME | (B-SERIES) - CASE DISK HARROW (1/66-12/70) |
| (10) - AXLE AND WHEELS, SINGLE WHEEL, FOR B97, B109 AND B117 MODELS, 1966 PRODUCTION | (B-SERIES) - CASE DISK HARROW (1/66-12/70) |
| (12) - AXLE AND WHEELS, SINGLE WHEEL, FOR B97, B109, B117 MODELS | (B-SERIES) - CASE DISK HARROW (1/66-12/70) |
| (14) - AXLE AND WHEELS, SINGLE AND DUAL WHEELS, NOT FOR B97, B109, B117 MODELS | (B-SERIES) - CASE DISK HARROW (1/66-12/70) |
| (15A) - AXLE AND WHEELS, SINGLE AND DUAL WHEELS, NOT FOR B97, B109, B117 MODELS | (B-SERIES) - CASE DISK HARROW (1/66-12/70) |
| (90) - CENTER TOOTH ATTACHMENT | (B-SERIES) - CASE DISK HARROW (1/66-12/70) |
| (04) - HITCH | (WB-SERIES) - CASE DISK HARROWS (1/66-12/70) |
| (06) - MAIN FRAME | (WB-SERIES) - CASE DISK HARROWS (1/66-12/70) |
| (10) - AXLE AND WHEELS, SINGLE WHEEL, FOR B97, B109 AND B117 MODELS, 1966 PRODUCTION | (WB-SERIES) - CASE DISK HARROWS (1/66-12/70) |
| (12) - AXLE AND WHEELS, SINGLE WHEEL, FOR B97, B109, B117 MODELS | (WB-SERIES) - CASE DISK HARROWS (1/66-12/70) |
| (14) - AXLE AND WHEELS, SINGLE AND DUAL WHEELS, NOT FOR B97, B109, B117 MODELS | (WB-SERIES) - CASE DISK HARROWS (1/66-12/70) |
| (15A) - AXLE AND WHEELS, SINGLE AND DUAL WHEELS, NOT FOR B97, B109, B117 MODELS | (WB-SERIES) - CASE DISK HARROWS (1/66-12/70) |
| (90) - CENTER TOOTH ATTACHMENT | (WB-SERIES) - CASE DISK HARROWS (1/66-12/70) |
| (9-10) - GAUGE WHEEL, FOUR BOLT HUB | (125) - CASE IH MOLDBOARD PLOW (1/75-12/90) |
| (9-12) - GAUGE WHEEL, SIX BOLT HUB | (125) - CASE IH MOLDBOARD PLOW (1/75-12/90) |
| (9-14) - REAR FURROW WHEEL | (125) - CASE IH MOLDBOARD PLOW (1/75-12/90) |
| (08) - FLEXIBLE HITCH | (203S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (10) - HITCH, CATEGORY I OR II | (203S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (12) - HYDRAULIC ACTUATOR AND HOSE, 3 BOTTOM, 4 BOTTOM | (203S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (16) - GAUGE WHEEL | (203S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (18) - REAR COULTER | (203S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (08) - FLEXIBLE HITCH | (204S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (10) - HITCH, CATEGORY I OR II | (204S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (12) - HYDRAULIC ACTUATOR AND HOSE, 3 BOTTOM, 4 BOTTOM | (204S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (16) - GAUGE WHEEL | (204S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (18) - REAR COULTER | (204S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (08) - FLEXIBLE HITCH | (213S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (10) - HITCH, CATEGORY I OR II | (213S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (12) - HYDRAULIC ACTUATOR AND HOSE, 3 BOTTOM, 4 BOTTOM | (213S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (16) - GAUGE WHEEL | (213S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (18) - REAR COULTER | (213S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (08) - FLEXIBLE HITCH | (214S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (10) - HITCH, CATEGORY I OR II | (214S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (12) - HYDRAULIC ACTUATOR AND HOSE, 3 BOTTOM, 4 BOTTOM | (214S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (16) - GAUGE WHEEL | (214S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (18) - REAR COULTER | (214S) - CASE TWO-WAY MOUNTED MOLDBOARD PLOW (1/62-12/64) |
| (04) - HITCH AND DRAWBAR, IN FURROW HITCH | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (05A) - HITCH, TRAIL HITCH | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (06) - HITCH TONGUE, IN FURROW HITCH, 4 AND 5 BOTTOM, 5 TO 6 BOTTOM, 6 AND 7 BOTTOM | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (07A) - HITCH TONGUE, TRAIL HITCH | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (07C) - LAND AXLE AND WHEEL, TRAIL HITCH | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (10) - HILLSIDE HITCH, IN FURROW | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (12) - HITCH TONGUE AND DRAWBAR, ON LAND HITCH | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (14) - FRONT WHEEL LINKAGE, ON LAND HITCH, 5 BOTTOM, 5 TO 6 BOTTOM, 6, 7 AND 8 BOTTOM | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (15A) - FURROW WHEEL LINKAGE, TRAIL HITCH | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (20) - FRAME, 4 BOTTOM | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (22) - FRAME, 5 BOTTOM | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (24) - FRAME, 6 BOTTOM | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (26) - INDIVIDUAL TRIP BEAM | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (28) - STEERING RODS | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (30) - REAR WHEEL AND AXLE | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (32) - GAUGE WHEEL AND AXLE, STANDARD | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (34) - GAUGE WHEEL AND AXLE, HEAVY DUTY | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (36) - BOTTOM ATTACHMENT, TO EXPAND 4 BOTTOM TO 5 BOTTOM, OR 5 BOTTOM TO 6 BOTTOM | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (38) - BOTTOM ATTACHMENT, TO EXPAND 6 BOTTOM TO 7 BOTTOM, OR 6 BOTTOM TO 8 BOTTOM, 7 AND 8 BOTTOM | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (40) - BOTTOM ATTACHMENT, TO EXPAND 6 BOTTOM TO 7 BOTTOM, OR 6 BOTTOM TO 8 BOTTOM, 7 AND 8 BOTTOM | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (44) - CUSHION COULTER, REGULAR | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (46) - CUSHION COULTER, ANTI-FRICTION BEARING | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (48) - ANTI-FRICTION CANTILEVER COULTER | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (50[A]) - ANTI-FRICTION COULTERS | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (50) - ROLLING COULTERS | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (52) - CONCAVE DISK COULTERS, 16 INCH | (3300-SERIES) - CASE POWR-SET SEMI-MOUNTED MOLDBOARD PLOWS (1/67-12/72) |
| (9-32) - GAUGE WHEEL | (450) - CASE IH MOLDBOARD PLOW (1/84-12/93) |
| (38) - CANTILEVER COULTER, RIGID | (8300-SERIES) - CASE SEMI-MOUNTED POWR-SET MOLDBOARD PLOW (1/70-12/75) |
| (40) - CANTILEVER COULTER, SPRING | (8300-SERIES) - CASE SEMI-MOUNTED POWR-SET MOLDBOARD PLOW (1/70-12/75) |
| (42) - FURROW MAKER GUAGE | (8300-SERIES) - CASE SEMI-MOUNTED POWR-SET MOLDBOARD PLOW (1/70-12/75) |
| (016) - EXF EAGLE BOTTOM, PER BOTTOM 14 INCH AND 16 INCH, CONTINUED | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS (1/64-12/79) |
| (018) - EXR 12 INCH EAGLE BOTTOM, PER BOTTOM | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS (1/64-12/79) |
| (024) - EXR 14 INCH AND 16 INCH EAGLE BOTTOMS, PER BOTTOM 14 INCH AND 16 INCH | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS (1/64-12/79) |
| (026) - EXT 14 INCH AND 16 INCH EAGLE BOTTOMS, PER BOTTOM | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS (1/64-12/79) |
| (090) - EXC 14L AND 16L EAGLE BOTTOM, PER BOTTOM 14 INCH AND 16 INCH | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS (1/64-12/79) |
| (106) - G12 SCOTCH BOTTOM, PER BOTTOM | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS (1/64-12/79) |
| (118) - EXA 14 INCH AND 16 INCH EAGLE STUBBLE BOTTOM, PER BOTTOM 14 INCH AND 16 INCH, CONTINUED | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS (1/64-12/79) |
| (120) - TRASHBOARD | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS (1/64-12/79) |
| (04) - EXA14, EXA16 STUBBLE, PER BOTTOM, 14 INCH AND 16 INCH | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (06) - EXA14, EXA16 STUBBLE, PER BOTTOM, 14 INCH AND 16 INCH, CONTINUED | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (08) - EXB14, EXB16, PER BOTTOM, 14 INCH AND 16 INCH | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (10) - EXB14, EXB16, PER BOTTOM, 14 INCH AND 16 INCH, CONTINUED | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (12) - EXB16 NARROW CUT, PER BOTTOM | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (14) - EXB16 NARROW CUT, PER BOTTOM, CONTINUED | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (16) - EXC12, PER BOTTOM | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (18) - EXC12, PER BOTTOM, CONTINUED | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (20) - EXC14, EXC16, PER BOTTOM, 14 INCH AND 16 INCH | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (22) - EXC14, EXC16, PER BOTTOM, 14 INCH AND 16 INCH, CONTINUED | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (24) - EXC14 L.H., EXC16 L.H., PER BOTTOM, 14 INCH AND 16 INCH | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (26) - EXD14, EXD16 SLAT, PER BOTTOM, 14 INCH AND 16 INCH | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (28) - EXD14, EXD16 SLAT, PER BOTTOM, 14 INCH AND 16 INCH, CONTINUED | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (30) - EXD14 L.H., EXD16 L.H., SLAT, PER BOTTOM, 14 INCH AND 16 INCH | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (32) - EXD14 L.H., EXD16 L.H., SLAT, PER BOTTOM, 14 INCH AND 16 INCH, CONTINUED | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (34) - EXE14, EXE16 SOD, PER BOTTOM, 14 INCHES AND 16 INCHES | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (36) - EXE14, EXE16 SOD, PER BOTTOM, 14 INCHES AND 16 INCHES, CONTINUED | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (40) - EXF14, EXF16, PER BOTTOM, 14 INCHES AND 16 INCHES, CONTINUED | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (50) - EXHS14, EXHS16 SLAT, PER BOTTOM, 14 INCHES AND 16 INCHES | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (54) - EXR12, PER BOTTOM | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (56) - EXR14, EXR16, PER BOTTOM, 14 INCHES AND 16 INCHES | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (58) - EXR14, EXR16, PER BOTTOM, 14 INCHES AND 16 INCHES, CONTINUED | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (60) - EXT14, EXT16, PER BOTTOM, 14 INCHES AND 16 INCHES | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (62) - EXT14, EXT16, PER BOTTOM, 14 INCHES AND 16 INCHES, CONTINUED | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (64) - TRASHBOARD | (CASE) - MOUNTED MOLDBOARD PLOW BOTTOMS W/CLIPPED HEAD TYPE SHARE BOLTS (1/69-12/79) |
| (06) - HITCH AND TIE BAR, JRA AND JTA, FIVE AND SIX BOTTOM | (JRA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (20[1]) - FRAME EXTENSION AND BEAMS, TO CONVERT 4 BTM. TO 5 BTM. AND 5 BTM. TO 6 BTM., 16 INCHES | (JRA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (20) - FRAME EXTENSION AND BEAMS, TO CONVERT 4 BTM. TO 5 BTM. AND 5 BTM. 6 BTM., 14 INCHES | (JRA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (22) - FRAME EXTENSION AND BEAMS, TO CONVERT JRA AND JTA 6 BTM. TO 7 BTM., 16 INCHES | (JRA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (24[1]) - SHEAR BOLT, STANDARD AND BRACKET, PARTS TO CONVERT JRA 6 BOTTOM TO 7 BOTTOM | (JRA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (24) - GAUGE WHEEL AND AXLE | (JRA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (30) - TONGUE SUPPORT AND FRONT STEERING, ON LAND HITCH | (JRA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (34) - FRONT WHEEL LINKAGE, ON LAND HITCH | (JRA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (36) - STEERING PIPE, ON LAND HITCH | (JRA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (38) - STEERING PIPE, IN THE FURROW HITCH | (JRA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (40) - REAR AXLE BRACKET, RIGID, TRIP | (JRA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (44[1]) - CONCAVE DISK COULTER 16 INCH | (JRA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (44) - ROLLING COULTER | (JRA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (46) - ANTI-FRICTION CANTILEVER COULTER | (JRA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (47A) - CUSHION COULTER, REGULAR | (JRA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (47C) - CUSHION COULTER, ANTI-FRICTION BEARING | (JRA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (47E) - ANTI-FRICTION COULTERS | (JRA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (06) - HITCH AND TIE BAR, JRA AND JTA, FIVE AND SIX BOTTOM | (JTA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (20[1]) - FRAME EXTENSION AND BEAMS, TO CONVERT 4 BTM. TO 5 BTM. AND 5 BTM. TO 6 BTM., 16 INCHES | (JTA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (20) - FRAME EXTENSION AND BEAMS, TO CONVERT 4 BTM. TO 5 BTM. AND 5 BTM. 6 BTM., 14 INCHES | (JTA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (22) - FRAME EXTENSION AND BEAMS, TO CONVERT JRA AND JTA 6 BTM. TO 7 BTM., 16 INCHES | (JTA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (24[1]) - SHEAR BOLT, STANDARD AND BRACKET, PARTS TO CONVERT JRA 6 BOTTOM TO 7 BOTTOM | (JTA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (24) - GAUGE WHEEL AND AXLE | (JTA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (30) - TONGUE SUPPORT AND FRONT STEERING, ON LAND HITCH | (JTA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (34) - FRONT WHEEL LINKAGE, ON LAND HITCH | (JTA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (36) - STEERING PIPE, ON LAND HITCH | (JTA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (38) - STEERING PIPE, IN THE FURROW HITCH | (JTA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (40) - REAR AXLE BRACKET, RIGID, TRIP | (JTA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (44[1]) - CONCAVE DISK COULTER 16 INCH | (JTA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (44) - ROLLING COULTER | (JTA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (46) - ANTI-FRICTION CANTILEVER COULTER | (JTA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (47A) - CUSHION COULTER, REGULAR | (JTA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (47C) - CUSHION COULTER, ANTI-FRICTION BEARING | (JTA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (47E) - ANTI-FRICTION COULTERS | (JTA-SERIES) - CASE SEMI-MOUNTED MOLDBOARD PLOWS (1/64-12/70) |
| (04) - MAST AND DRAFT BAR FOR CATEGORY I AND EAGLE HITCH, MTA TWO BOTTOM, 14 AND 16 INCH | (MA) - CASE PLOW (1/64-12/88) |
| (06) - MAST AND DRAFT BAR FOR CATEGORY I AND EAGLE HITCH, MTA THREE BOTTOM, 12 YEAR, 64 - | (MA) - CASE PLOW (1/64-12/88) |
| (08) - MAST AND DRAFT BAR FOR CATEGORY I AND EAGLE HITCH, MA AND MTA, FOUR BOTTOM | (MA) - CASE PLOW (1/64-12/88) |
| (12) - MAST AND DRAFT BAR FOR CATEGORY II HITCH, MA AND MTA FIVE BOTTOM, 14 AND 16 INCH | (MA) - CASE PLOW (1/64-12/88) |
| (14) - LEAD LEVER | (MA) - CASE PLOW (1/64-12/88) |
| (16[A]) - MAIN FRAME, MTA THREE BOTTOM, 12 INCH | (MA) - CASE PLOW (1/64-12/88) |
| (16) - MAIN FRAME, MTA TWO BOTTOM, 14 AND 16 INCH | (MA) - CASE PLOW (1/64-12/88) |
| (18) - MAIN FRAME, MTA THREE BOTTOM, 14 AND 16 INCH | (MA) - CASE PLOW (1/64-12/88) |
| (20) - MAIN FRAME, MA AND MTA FOUR BOTTOM, 14 AND 16 INCH | (MA) - CASE PLOW (1/64-12/88) |
| (22) - MAIN FRAME, MA AND MTA FIVE BOTTOM, 14 AND 16 INCH | (MA) - CASE PLOW (1/64-12/88) |
| (24) - BEAM BRACKETS AND TRIP STANDARDS, MTA TWO BOTTOM, 14 AND 16 INCH | (MA) - CASE PLOW (1/64-12/88) |
| (26) - BEAM BRACKETS AND TRIP STANDARDS, MTA THREE BOTTOM, 12 INCH | (MA) - CASE PLOW (1/64-12/88) |
| (28) - BEAM BRACKETS AND TRIP STANDARDS, MTA THREE BOTTOM, 14 AND 16 INCH | (MA) - CASE PLOW (1/64-12/88) |
| (30) - BEAM BRACKETS AND TRIP STANDARDS, MTA FOUR BOTTOM, 14 AND 16 INCH | (MA) - CASE PLOW (1/64-12/88) |
| (32) - BEAM BRACKETS AND TRIP STANDARDS, MTA FIVE BOTTOM, 14 AND 16 INCH | (MA) - CASE PLOW (1/64-12/88) |
| (36) - ROLLING COULTERS AND CLAMPS, PER BOTTOM | (MA) - CASE PLOW (1/64-12/88) |
| (38) - CONCAVE DISK COULTER 16 INCH | (MA) - CASE PLOW (1/64-12/88) |
| (42) - GAUGE WHEEL, MTA TWO AND THREE BOTTOM | (MA) - CASE PLOW (1/64-12/88) |
| (44) - GAUGE WHEEL, MA AND MTA FOUR AND FIVE BOTTOM | (MA) - CASE PLOW (1/64-12/88) |
| (46) - REAR FURROW WHEEL, MTA TWO AND THREE BOTTOM | (MA) - CASE PLOW (1/64-12/88) |
| (50[A]) - REAR LIFT LINKAGE, SRA, STA | (MA) - CASE PLOW (1/64-12/88) |
| (52) - REAR LIFT LINKAGE, SRA, STA, CONTINUED | (MA) - CASE PLOW (1/64-12/88) |
| (54[A]) - HYDRAULIC LIFT LINKS AND HOSE SUPPORTS | (MA) - CASE PLOW (1/64-12/88) |
| (04) - MAST AND DRAFT BAR FOR CATEGORY I AND EAGLE HITCH, MTA TWO BOTTOM, 14 AND 16 INCH | (MTA) - CASE PLOW (1/60-12/67) |
| (06) - MAST AND DRAFT BAR FOR CATEGORY I AND EAGLE HITCH, MTA THREE BOTTOM, 12 YEAR, 64 - | (MTA) - CASE PLOW (1/60-12/67) |
| (08) - MAST AND DRAFT BAR FOR CATEGORY I AND EAGLE HITCH, MA AND MTA, FOUR BOTTOM | (MTA) - CASE PLOW (1/60-12/67) |
| (12) - MAST AND DRAFT BAR FOR CATEGORY II HITCH, MA AND MTA FIVE BOTTOM, 14 AND 16 INCH | (MTA) - CASE PLOW (1/60-12/67) |
| (14) - LEAD LEVER | (MTA) - CASE PLOW (1/60-12/67) |
| (16[A]) - MAIN FRAME, MTA THREE BOTTOM, 12 INCH | (MTA) - CASE PLOW (1/60-12/67) |
| (16) - MAIN FRAME, MTA TWO BOTTOM, 14 AND 16 INCH | (MTA) - CASE PLOW (1/60-12/67) |
| (18) - MAIN FRAME, MTA THREE BOTTOM, 14 AND 16 INCH | (MTA) - CASE PLOW (1/60-12/67) |
| (20) - MAIN FRAME, MA AND MTA FOUR BOTTOM, 14 AND 16 INCH | (MTA) - CASE PLOW (1/60-12/67) |
| (22) - MAIN FRAME, MA AND MTA FIVE BOTTOM, 14 AND 16 INCH | (MTA) - CASE PLOW (1/60-12/67) |
| (24) - BEAM BRACKETS AND TRIP STANDARDS, MTA TWO BOTTOM, 14 AND 16 INCH | (MTA) - CASE PLOW (1/60-12/67) |
| (26) - BEAM BRACKETS AND TRIP STANDARDS, MTA THREE BOTTOM, 12 INCH | (MTA) - CASE PLOW (1/60-12/67) |
| (28) - BEAM BRACKETS AND TRIP STANDARDS, MTA THREE BOTTOM, 14 AND 16 INCH | (MTA) - CASE PLOW (1/60-12/67) |
| (30) - BEAM BRACKETS AND TRIP STANDARDS, MTA FOUR BOTTOM, 14 AND 16 INCH | (MTA) - CASE PLOW (1/60-12/67) |
| (32) - BEAM BRACKETS AND TRIP STANDARDS, MTA FIVE BOTTOM, 14 AND 16 INCH | (MTA) - CASE PLOW (1/60-12/67) |
| (36) - ROLLING COULTERS AND CLAMPS, PER BOTTOM | (MTA) - CASE PLOW (1/60-12/67) |
| (38) - CONCAVE DISK COULTER 16 INCH | (MTA) - CASE PLOW (1/60-12/67) |
| (42) - GAUGE WHEEL, MTA TWO AND THREE BOTTOM | (MTA) - CASE PLOW (1/60-12/67) |
| (44) - GAUGE WHEEL, MA AND MTA FOUR AND FIVE BOTTOM | (MTA) - CASE PLOW (1/60-12/67) |
| (46) - REAR FURROW WHEEL, MTA TWO AND THREE BOTTOM | (MTA) - CASE PLOW (1/60-12/67) |
| (50[A]) - REAR LIFT LINKAGE, SRA, STA | (MTA) - CASE PLOW (1/60-12/67) |
| (52) - REAR LIFT LINKAGE, SRA, STA, CONTINUED | (MTA) - CASE PLOW (1/60-12/67) |
| (54[A]) - HYDRAULIC LIFT LINKS AND HOSE SUPPORTS | (MTA) - CASE PLOW (1/60-12/67) |
| (06) - MAIN FRAME | (D-SERIES) - CASE HEAVY DUTY WHEEL-TYPE TANDEM DISK HARROW (1/72-12/82) |
| (14[1]) - END DISK SCRAPERS, CONICAL BLADES | (D-SERIES) - CASE HEAVY DUTY WHEEL-TYPE TANDEM DISK HARROW (1/72-12/82) |
| (14) - DISK SCRAPERS, CONICAL BLADES, D11, D13, D15 | (D-SERIES) - CASE HEAVY DUTY WHEEL-TYPE TANDEM DISK HARROW (1/72-12/82) |
| (16[1]) - END DISK SCRAPERS, SPHERICAL BLADES | (D-SERIES) - CASE HEAVY DUTY WHEEL-TYPE TANDEM DISK HARROW (1/72-12/82) |
| (16) - DISK SCRAPERS, SPHERICAL BLADES, D11, D13, D15 | (D-SERIES) - CASE HEAVY DUTY WHEEL-TYPE TANDEM DISK HARROW (1/72-12/82) |
| (18) - FURROW FILLER | (D-SERIES) - CASE HEAVY DUTY WHEEL-TYPE TANDEM DISK HARROW (1/72-12/82) |
| (62) - INSTRUMENT PANEL, SKID AND MOUNTING PARTS | (188) - CASE DIESEL & SPARK IGNITION POWER UNIT (1/79-12/80) |
| (32) - CAMSHAFT / CRANKSHAFT - FLYWHEEL & HOUSING, SPARK IGNITION ENGINE | (A284) - CASE SPARK IGNITION POWER UNIT (1/59-12/69) |
| (118) - ENGINE SUPPORTS, FRONT AND REAR, B, C, D | (301BD) - CASE 4-CYL. DIESEL POWER UNIT (1/74-12/79) |
| (118) - ENGINE SUPPORTS, FRONT AND REAR, B, C, D | (336BD) - CASE 4-CYL. DIESEL POWER UNIT (1/55-12/79) |
| (118) - ENGINE SUPPORTS, FRONT AND REAR, B, C, D | (336BDT) - CASE 4-CYL. DIESEL POWER UNIT (1/55-12/79) |
| (084) - ENGINE SUPPORTS, FRONT AND REAR, E | (336D) - CASE DIESEL ENGINE AND POWER UNIT (1/55-12/79) |
| (084) - ENGINE SUPPORTS, FRONT AND REAR, E | (336DT) - CASE DIESEL ENGINE AND POWER UNIT (1/55-12/79) |
| (102) - VARIABLE SPEED CYLINDER DRIVE | (660) - CASE COMBINE (1/66-12/71) |
| (130) - GRAIN ELEVATOR DRIVE, GRAIN BIN COMBINES, NUMBER 8309001 AND AFTER | (660) - CASE COMBINE (1/66-12/71) |
| (132) - GRAIN ELEVATOR DRIVE, BEFORE NUMBER 8309001 | (660) - CASE COMBINE (1/66-12/71) |
| (134) - EDIBLE BEAN ELEVATOR DRIVE, GRAIN BIN COMBINES, NUMBER 8309001 AND AFTER | (660) - CASE COMBINE (1/66-12/71) |
| (136) - EDIBLE BEAN ELEVATOR DRIVE, BEFORE NUMBER 8309001 | (660) - CASE COMBINE (1/66-12/71) |
| (12) - PRIMARY DRIVE, BEFORE NUMBER 8352501 | (475) - CASE PULL-TYPE WINDROWER (1/65-12/73) |
| (13A) - PRIMARY DRIVE, NUMBER 8352501 THRU 8373900 | (475) - CASE PULL-TYPE WINDROWER (1/65-12/73) |
| (13C) - PRIMARY DRIVE, NUMBER 8373901 AND AFTER | (475) - CASE PULL-TYPE WINDROWER (1/65-12/73) |
| (12) - PRIMARY DRIVE, BEFORE NUMBER 8352501 | (555) - CASE PULL-TYPE WINDROWER (1/67-12/68) |
| (13A) - PRIMARY DRIVE, NUMBER 8352501 THRU 8373900 | (555) - CASE PULL-TYPE WINDROWER (1/67-12/68) |
| (13C) - PRIMARY DRIVE, NUMBER 8373901 AND AFTER | (555) - CASE PULL-TYPE WINDROWER (1/67-12/68) |
| (36) - TENSION SPRING HEADER FLOTATION | (1050) - CASE SELF-PROPELLED WINDROWER (1/63-12/67) |
| (40) - REEL DRIVE | (655) - CASE SELF-PROPELLED WINDROWER (1/67-12/69) |
| (40) - REEL DRIVE | (675) - CASE SELF-PROPELLED WINDROWER (1/67-12/72) |
| (16) - HEADER DRIVE AND LINKAGE | (855) - CASE SELF-PROPELLED WINDROWER (1/67-12/69) |
| (30) - REEL DRIVE | (855) - CASE SELF-PROPELLED WINDROWER (1/67-12/69) |
| (34) - HEADER FRAME AND SICKLE | (855) - CASE SELF-PROPELLED WINDROWER (1/67-12/69) |
| (46) - CONTOUR FLEX FLOTATION ATTACHMENT | (855) - CASE SELF-PROPELLED WINDROWER (1/67-12/69) |
| (58) - HAY CONDITIONER, LOWER UNIT | (855) - CASE SELF-PROPELLED WINDROWER (1/67-12/69) |
| (04) - MAIN FRAME | (856) - CASE SELF-PROPELLED WINDROWER (1/67-12/69) |
| (16) - HEADER DRIVE AND LINKAGE | (856) - CASE SELF-PROPELLED WINDROWER (1/67-12/69) |
| (36) - TENSION SPRING HEADER FLOTATION | (950) - CASE SELF-PROPELLED WINDROWER (1/89-12/95) |
| (032) - PTO HOUSING, A126 ENGINE | (950) - CASE SELF-PROPELLED WINDROWER (S/N 8292501 & AFTER) (1/60-12/67) |
| (042) - MAIN FRAME AND HEADER LIFT | (950) - CASE SELF-PROPELLED WINDROWER (S/N 8292501 & AFTER) (1/60-12/67) |
| (031Q) - L.P. - GAS SYSTEM | (1529) - CASE UNI-LOADER SKID STEER LOADER W/DEUTZ ENGINE (1/69-12/88) |
| (132[A]) - BUCKETS, LIGHT MATERIAL BUCKET | (1529) - CASE UNI-LOADER SKID STEER LOADER W/DEUTZ ENGINE (1/69-12/88) |
| (132) - BUCKETS | (1529) - CASE UNI-LOADER SKID STEER LOADER W/DEUTZ ENGINE (1/69-12/88) |
| (134[B]) - BUCKET, POULTRY YARD BUCKET | (1529) - CASE UNI-LOADER SKID STEER LOADER W/DEUTZ ENGINE (1/69-12/88) |
| (134) - BUCKET, CEMENT | (1529) - CASE UNI-LOADER SKID STEER LOADER W/DEUTZ ENGINE (1/69-12/88) |
| (136) - SNOW BLADE | (1529) - CASE UNI-LOADER SKID STEER LOADER W/DEUTZ ENGINE (1/69-12/88) |
| (154) - WOOD-TICK | (1529) - CASE UNI-LOADER SKID STEER LOADER W/DEUTZ ENGINE (1/69-12/88) |
| (166) - MANURE FORK | (1529) - CASE UNI-LOADER SKID STEER LOADER W/DEUTZ ENGINE (1/69-12/88) |
| (192) - KEYSTAND CORE ANGLE BROOM | (1529) - CASE UNI-LOADER SKID STEER LOADER W/DEUTZ ENGINE (1/69-12/88) |
| (8-082) - ENDWISE TRANSPORT WHEEL HYDRAULIC CYLINDER, CYCLO AIR TRAILING, 8 ROW, PLATE TRAILING, 8 ROW NARROW | (900) - CASE IH PLANTER (1/87-12/95) |
| (8-088) - HYDRAULIC CYLINDER, 1282329C91, ENDWISE TRANSPORT WHEEL, 8 ROW NARROW, RIGID | (950) - CASE IH TRAILING PLANTER (7/89-12/95) |
| (8-116) - HYDRAULIC CYLINDER - 1282329C91, ENDWISE TRANSPORT WHEEL - 8 ROW NARROW RIGID WING FRAME FOLD 12 ROW | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (35.100.BI[01]) - HYDRAULIC CYLINDER 3.5 X 20 3000 PSI NO PINS | (1235) - STACKER PLANTER 12 ROW 30" EARLY RISER SERIES (10/13-6/16) |
| (35.100.BI[01]) - HYDRAULIC CYLINDER 3.5 X 20 3000 PSI NO PINS | (1235) - STACKER PLANTER 12 ROW 36" EARLY RISER SERIES (10/13-2/16) |
| (35.100.BI[01]) - HYDRAULIC CYLINDER 3.5 X 20 3000 PSI NO PINS | (1235) - STACKER PLANTER 12 ROW 38" EARLY RISER SERIES (10/13-2/15) |
| (35.100.BI[01]) - HYDRAULIC CYLINDER 3.5 X 20 3000 PSI NO PINS | (1235) - STACKER PLANTER 12 ROW 40" EARLY RISER SERIES (10/13-1/15) |
| (35.100.BI[01]) - HYDRAULIC CYLINDER 3.5 X 20 3000 PSI NO PINS | (1235) - STACKER PLANTER 16 ROW 30" EARLY RISER SERIES (10/13-9/16) |
| (35.100.BI[01]) - HYDRAULIC CYLINDER 3.5 X 20 3000 PSI NO PINS | (1235) - STACKER PLANTER 8 ROW 38" EARLY RISER SERIES (10/13-12/14) |
| (35.100.BI[01]) - HYDRAULIC CYLINDER 3.5 X 20 3000 PSI NO PINS | (1235) - STACKER PLANTER 8 ROW 40" EARLY RISER SERIES (10/13-) |
| (39.100.01) - FRAME ASSEMBLY | (530B) - DMI ECOLO-TIGER (1/97-12/07) |
| (75.200.07) - LEAD SHANK ASSEMBLY | (530B) - DMI ECOLO-TIGER (1/97-12/07) |
| (39.100.01) - MAIN FRAME ASSEMBLY | (530B) - ECOLO-TIGER MULCH CHISEL (1/97-12/05) |
| (75.200.06) - LEAD SHANK ASSEMBLY | (530B) - ECOLO-TIGER MULCH CHISEL (1/97-12/05) |
| (8-050) - CYLINDER ASSEMBLY - 149950C92, 4-1/4 ID X 8 INCH STROKE | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (8-050) - CYLINDER ASSEMBLY - 149950C92, 4-1/4 ID X 8 INCH STROKE | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (8-26) - CYLINDER ASSEMBLY, 1282328C92 | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (8-28) - CYLINDER ASSEMBLY, 1272485C92 | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (8-32) - CYLINDER ASSEMBLY, 1272150C91 | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (8-36) - CYLINDER ASSEMBLY, 224795C92 | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (39.100.01) - FRAME ASSEMBLY | (730B) - DMI ECOLO-TIGER (1/97-12/07) |
| (75.200.07) - LEAD SHANK ASSEMBLY | (730B) - DMI ECOLO-TIGER (1/97-12/07) |
| (39.100.01) - MAIN FRAME ASSEMBLY | (730B) - ECOLO-TIGER MULCH CHISEL (1/02-12/05) |
| (75.200.06) - LEAD SHANK ASSEMBLY | (730B) - ECOLO-TIGER MULCH CHISEL (1/02-12/05) |
| (8-044) - CYLINDER ASSEMBLY, 1282328C92 | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (8-046) - CYLINDER ASSEMBLY, 1272485C92 | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (8-050) - CYLINDER ASSEMBLY, 1272150C91 | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (8-054) - CYLINDER ASSEMBLY, 224795C92 | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (8-10) - DEPTH CONTROL HYDRAULIC CYLINDER 3-3/4 INCH BORE X 12 INCH STROKE | (696) - CASE IH TRAILER DISK HARROW (1/79-12/92) |
| (8-12) - DEPTH CONTROL HYDRAULIC CYLINDER 4 INCH BORE X 12 INCH STROKE | (696) - CASE IH TRAILER DISK HARROW (1/79-12/92) |
| (8-4) - HYDRAULIC CYLINDER | (6500) - CASE IH CONSER-TILL PLOW (1/87-12/97) |
| (75.200.06) - LEAD SHANK ASSEMBLY | (9300) - DMI ECOLO-TIGER DISK RIPPER (1/98-12/06) |
| (75.200.08) - LEAD SHANK ASSEMBLY | (9300) - ECOLO-TIGER DISK RIPPER (7/04-12/09) |
| (8-06) - HYDRAULIC WING FOLD CYLINDER, 4 INCH BORE X 42 INCH STROKE USED ON MACHINES 29' 3" AND WIDER | (3900) - CASE IH FLEX WING TANDEM DISK HARROW (1/91-12/97) |
| (8-06) - HYDRAULIC WING FOLD CYLINDER, 4 INCH BORE X 42 INCH STROKE | (3950) - CASE IH FLEX WING TANDEM DISK HARROW (1/96-12/00) |
| (154) - ENGINE SUPPORTS, FRONT AND REAR, B, C, D | (451BD) - CASE DIESEL ENGINE & POWER UNIT (SIZE 111) (1/79-12/79) |
| (154) - ENGINE SUPPORTS, FRONT AND REAR, B, C, D | (451BDT) - CASE DIESEL ENGINE & POWER UNIT (SIZE 111) (1/70-12/79) |
| (154) - ENGINE SUPPORTS, FRONT AND REAR, B, C, D | (504BD) - CASE DIESEL ENGINE & POWER UNIT (SIZE 111) (1/55-12/79) |
| (154) - ENGINE SUPPORTS, FRONT AND REAR, B, C, D | (504BDT) - CASE DIESEL ENGINE & POWER UNIT (SIZE 111) (1/55-12/79) |
| (122) - ENGINE SUPPORTS, FRONT AND REAR, E | (504D) - CASE DIESEL ENGINE & POWER UNIT (SIZE 111) (1/55-12/79) |
| (122) - ENGINE SUPPORTS, FRONT AND REAR, E | (504DT) - CASE DIESEL ENGINE & POWER UNIT (SIZE 111) (1/55-12/88) |
| (122) - ENGINE SUPPORTS, FRONT AND REAR, E | (504DTI) - CASE DIESEL ENGINE & POWER UNIT (SIZE 111) (1/55-12/88) |
| (9A-062) - BLOWER ROTOR | (781) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/86) |
| (9A-062) - BLOWER ROTOR | (881) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/92) |
| (016) - STANDARD REEL DRIVE | (1660) - CASE COMBINE (1/86-12/89) |
| (024) - 4 BELT DRAPER PICKUP | (1660) - CASE COMBINE (1/86-12/89) |
| (026) - 5 BELT DRAPER PICKUP | (1660) - CASE COMBINE (1/86-12/89) |
| (036) - SICKLE DRIVE IDLER AND TIGHTENER | (1660) - CASE COMBINE (1/86-12/89) |
| (044[A]) - TIGHTENER, AUGER AND MAIN HEADER DRIVE | (1660) - CASE COMBINE (1/86-12/89) |
| (090) - VARIABLE SPEED CYLINDER DRIVE | (1660) - CASE COMBINE (1/86-12/89) |
| (044[A]) - SICKLE DRIVE IDLER AND TIGHTENER | (1010) - CASE COMBINE (1/63-12/03) |
| (050[1]) - SICKLE DRIVE IDLER AND TIGHTENER | (1060) - CASE COMBINE (1/65-1/70) |
| (094) - VARIABLE SPEED CYLINDER DRIVE | (960) - CASE COMBINE (1/66-12/71) |
| (126) - GRAIN ELEVATOR DRIVE, GRAIN COMBINE, NUMBER 8311400 AND AFTER | (960) - CASE COMBINE (1/66-12/71) |
| (128) - GRAIN ELEVATOR DRIVE, GRAIN COMBINE, BEFORE NUMBER 8311400 | (960) - CASE COMBINE (1/66-12/71) |
| (130) - GRAIN ELEVATOR DRIVE, 960 SPECIAL COMBINE, NUMBER 8311400 AND AFTER | (960) - CASE COMBINE (1/66-12/71) |
| (132) - GRAIN ELEVATOR DRIVE, 960 SPECIAL COMBINE, BEFORE NUMBER 8311400 | (960) - CASE COMBINE (1/66-12/71) |
| (024) - HEADER AUGER CLUTCH AND DRIVE | (460) - CASE PULL-TYPE COMBINE W/PTO DRIVE (1/66-12/69) |
| (40) - OUTER GATHERING CHAINS AND IDLERS | (F345) - CASE CORN HEAD (1/63-12/67) |
| (020) - SHIFTER | (1075) - CASE SELF-PROPELLED WINDROWER (1/67-12/72) |
| (092) - RADIATOR AND HOOD | (1150) - CASE SELF-PROPELLED WINDROWER (1/60-12/67) |
| (094) - PTO HOUSING | (1150) - CASE SELF-PROPELLED WINDROWER (1/60-12/67) |
| (10) - MOUNTING BRACKETS & CLAMPS, 731, 741, 831 & 841 GENERAL PURPOSE TRACTOR W/ DUAL OR ADJ. FRONT AXLE | (70) - CASE FRONT END LOADER (1/74-12/84) |
| (12) - MOUNTING BRACKETS & CLAMPS, 931, 941 & 1031 GENERAL PURPOSE TRACS. W/ DUAL OR ADJUSTABLE FRONT AXLE | (70) - CASE FRONT END LOADER (1/74-12/84) |
| (14) - MOUNTING BRACKETS & CLAMPS, 730, 732, 740, 742, 830, 832, 840 & 842 TRACS. | (70) - CASE FRONT END LOADER (1/74-12/84) |
| (16) - MOUNTING BRACKETS AND CLAMPS, 431, 441, 470, 531, 541 AND | (70) - CASE FRONT END LOADER (1/74-12/84) |
| (18) - MOUNTING BRACKETS AND CLAMPS, 630 AND 640 STANDARD WHEEL | (70) - CASE FRONT END LOADER (1/74-12/84) |
| (088) - LOADER BUCKETS, UTILITY BUCKETS | (1500-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (090) - LOADER BUCKETS, POTATO BUCKET | (1500-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (092) - LOADER BUCKETS, DIRT BUCKETS | (1500-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (094) - LOADER BUCKETS, LATE PRODUCTION AND SERVICE REPLACEMENT BUCKETS, DIRT BUCKETS | (1500-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (096) - LOADER BUCKETS, FERTILIZER BUCKETS | (1500-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (098) - LOADER BUCKETS, MINING BUCKETS | (1500-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (114) - BLADE - STRAIGHT | (1500-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (116) - HYDRAULIC GRAPPLE | (1500-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (120) - WOOD TICK ASSEMBLY | (1500-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (074) - AIR CLEANER | (1529) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (176) - BUCKETS / LIGHT MATERIAL BUCKET | (1529) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (178) - BUCKET, CEMENT, ATLAS HYDRAULIC EXCAVATOR, POULTRY YARD BUCKET | (1529) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (180) - SNOW BLADE | (1529) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (204) - WOOD-TICK | (1529) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (220) - MANURE FORK | (1529) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (248) - KEYSTAND CORE ANGLE BROOM | (1529) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (088) - LOADER BUCKETS | (1530) - SERIES-B CASE UNI-LOADER SKID STEER LOADER (S/N 9816704 THRU 9825291) (1/71-12/74) |
| (089A) - LOADER BUCKETS | (1530) - SERIES-B CASE UNI-LOADER SKID STEER LOADER (S/N 9816704 THRU 9825291) (1/71-12/74) |
| (090) - LOADER BUCKETS LATE PRODUCTION AND SERVICE REPLACEMENT BUCKETS DIRT BUCKETS | (1530) - SERIES-B CASE UNI-LOADER SKID STEER LOADER (S/N 9816704 THRU 9825291) (1/71-12/74) |
| (091A) - LOADER BUCKETS, FERTILIZER BUCKETS | (1530) - SERIES-B CASE UNI-LOADER SKID STEER LOADER (S/N 9816704 THRU 9825291) (1/71-12/74) |
| (092) - MINING BUCKETS | (1530) - SERIES-B CASE UNI-LOADER SKID STEER LOADER (S/N 9816704 THRU 9825291) (1/71-12/74) |
| (098) - BLADE, STRAIGHT | (1530) - SERIES-B CASE UNI-LOADER SKID STEER LOADER (S/N 9816704 THRU 9825291) (1/71-12/74) |
| (100) - HYDRAULIC GRAPPLE | (1530) - SERIES-B CASE UNI-LOADER SKID STEER LOADER (S/N 9816704 THRU 9825291) (1/71-12/74) |
| (104) - WOOD TICK ASSEMBLY | (1530) - SERIES-B CASE UNI-LOADER SKID STEER LOADER (S/N 9816704 THRU 9825291) (1/71-12/74) |
| (088) - FUEL SYSTEM, 1737 AND 1737S | (1700-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/71-12/88) |
| (094) - POWER TRAIN, ENGINE TO DRIVE SPROCKETS | (1700-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/71-12/88) |
| (178) - LOADER BUCKETS | (1700-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/71-12/88) |
| (180) - LOADER BUCKETS | (1700-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/71-12/88) |
| (182) - LOADER BUCKETS, DIRT BUCKETS | (1700-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/71-12/88) |
| (183A) - LOADER BUCKETS, LATE PRODUCTION AND SERVICE REPLACEMENT BUCKETS, DIRT BUCKETS | (1700-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/71-12/88) |
| (184) - LOADER BUCKETS, MINING BUCKETS | (1700-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/71-12/88) |
| (186) - LOADER BUCKETS, FERTILIZER BUCKETS | (1700-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/71-12/88) |
| (196) - BLADE, STRAIGHT | (1700-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/71-12/88) |
| (198) - HYDRAULIC GRAPPLE | (1700-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/71-12/88) |
| (202) - WOOD TICK ASSEMBLY | (1700-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/71-12/88) |
| (48) - LOADER LIFT ARM AND TOOL TACH | (1816) - CASE UNI-LOADER SKID STEER LOADER (1/73-12/84) |
| (054) - ENGINE MOUNTING, FLYWHEEL GUARD, FAN AND FAN BELT | (1835) - CASE UNI-LOADER SKID STEER LOADER (7/80-12/82) |
| (236) - 4-IN-1 LOADER BUCKET | (1845) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/75-12/88) |
| (236) - 4-IN-1 LOADER BUCKET | (1845S) - CASE UNI-LOADER SKID STEER LOADER (1/75-12/88) |
| (166) - THREE POINT HITCH CONTROL LEVER LINKAGE | (1200) - CASE TRACTION KING TRACTOR (AFTER S/N 9806101) (1/66-12/69) |
| (184) - FRAME DRAWBAR AND ATTACHING PARTS | (1200) - CASE TRACTION KING TRACTOR (AFTER S/N 9806101) (1/66-12/69) |
| (270) - THREE POINT HITCH CONTROL LEVER LINKAGE | (1200) - CASE TRACTION KING TRACTOR (BEFORE S/N 9806101) (1/64-12/69) |
| (288) - FRAME DRAWBAR AND ATTACHING PARTS | (1200) - CASE TRACTION KING TRACTOR (BEFORE S/N 9806101) (1/64-12/69) |
| (444) - SEAT SUSPENSION, PRIOR TO P.I.N. 8782801 | (2470) - CASE TRACTION KING TRACTOR (AFTER S/N 8762940) (1/75-12/79) |
| (256) - SEAT SUSPENSION | (2470) - CASE TRACTION KING TRACTOR (BEFORE S/N 8762940) (1/72-12/79) |
| (440) - SEAT SUSPENSION, USED BEFORE TRACTOR SERIAL NUMBER 8792901 | (2670) - CASE TRACTION KING TRACTOR (1/71-12/79) |
| (322) - CHASSIS SILLS | (2870) - CASE TRACTION KING TRACTOR (1/76-12/79) |
| (9-346) - CHASSIS | (4490) - CASE TRACTOR (1/79-12/83) |
| (9-346) - CHASSIS | (4690) - CASE TRACTOR (1/79-12/83) |
| (9-394) - CHASSIS / ENGINE AND TRANSMISSION SUPPORT | (4694) - CASE IH TRACTOR (1/85-12/86) |
| (3-74) - FUEL TANKS, 674 CUBIC INCH DIESEL ENGINE | (4890) - CASE TRACTOR (1/79-12/83) |
| (8-254) - HYDRAULIC PUMP DRIVE | (4890) - CASE TRACTOR (1/79-12/83) |
| (9-358) - CHASSIS | (4890) - CASE TRACTOR (1/79-12/83) |
| (9-360) - PLATFORM AND SIDE PLATES | (4890) - CASE TRACTOR (1/79-12/83) |
| (172) - REAR WHEEL WEIGHTS | (1070) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8675001) (1/69-12/78) |
| (174) - REAR WHEEL WEIGHTS | (1070) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8675001) (1/69-12/78) |
| (179A) - P.T.O. HOUSING | (1070) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8675001) (1/69-12/78) |
| (246) - SEAT SUSPENSION | (1070) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8675001) (1/69-12/78) |
| (0362) - REAR WHEEL WEIGHTS, FOR 30 " WHEELS | (1070) - CASE AGRI-KING TRACTOR (S/N 8675001 & AFTER) (1/72-12/78) |
| (0364) - REAR WHEEL WEIGHTS, FOR 30 INCH, 34 INCH AND 38 INCH WHEELS | (1070) - CASE AGRI-KING TRACTOR (S/N 8675001 & AFTER) (1/72-12/78) |
| (0370) - PTO HOUSING, WITH PTO | (1070) - CASE AGRI-KING TRACTOR (S/N 8675001 & AFTER) (1/72-12/78) |
| (0526) - SEAT SUSPENSION, USED PRIOR TO TRACTOR SERIAL NUMBER 8693001 | (1070) - CASE AGRI-KING TRACTOR (S/N 8675001 & AFTER) (1/72-12/78) |
| (200) - REAR WHEEL WEIGHTS, 140 LBS. EACH, FOR 30 INCH WHEELS | (1090) - CASE AGRI-KING DIESEL TRACTOR (1/70-12/71) |
| (202) - REAR WHEEL WEIGHTS, 140 LBS. EACH, FOR 30, 34 AND 38 INCH WHEELS | (1090) - CASE AGRI-KING DIESEL TRACTOR (1/70-12/71) |
| (208) - P.T.O. HOUSING | (1090) - CASE AGRI-KING DIESEL TRACTOR (1/70-12/71) |
| (264) - DRAWBAR, WITH HITCH | (1090) - CASE AGRI-KING DIESEL TRACTOR (1/70-12/71) |
| (266) - DRAWBAR, WITHOUT HITCH | (1090) - CASE AGRI-KING DIESEL TRACTOR (1/70-12/71) |
| (284) - SEAT SUSPENSION | (1090) - CASE AGRI-KING DIESEL TRACTOR (1/70-12/71) |
| (126) - REAR WHEEL WEIGHTS | (1170) - CASE AGRI-KING DIESEL TRACTOR (1/70-12/71) |
| (132) - P.T.O. HOUSING | (1170) - CASE AGRI-KING DIESEL TRACTOR (1/70-12/71) |
| (140) - P.T.O. OUTPUT AND IDLER SHAFTS, SINGLE SPEED | (1170) - CASE AGRI-KING DIESEL TRACTOR (1/70-12/71) |
| (180) - DRAWBAR, WITH HITCH | (1170) - CASE AGRI-KING DIESEL TRACTOR (1/70-12/71) |
| (182) - DRAWBAR, WITHOUT HITCH | (1170) - CASE AGRI-KING DIESEL TRACTOR (1/70-12/71) |
| (200) - SEAT SUSPENSION | (1170) - CASE AGRI-KING DIESEL TRACTOR (1/70-12/71) |
| (138) - REAR WHEEL WEIGHTS, FOR 38 INCH CAST WHEEL | (1175) - CASE AGRI-KING DIESEL TRACTOR (1/72-12/78) |
| (144) - P.T.O. HOUSING | (1175) - CASE AGRI-KING DIESEL TRACTOR (1/72-12/78) |
| (152) - P.T.O. IDLER SHAFT, SINGLE SPEED, USED PRIOR TO TRANSMISSION SERIAL NUMBER 2402370 | (1175) - CASE AGRI-KING DIESEL TRACTOR (1/72-12/78) |
| (194) - DRAWBAR, WITHOUT HITCH | (1175) - CASE AGRI-KING DIESEL TRACTOR (1/72-12/78) |
| (217G) - SEAT SUSPENSION, USED PRIOR TO TRACTOR SERIAL NUMBER 8693001 | (1175) - CASE AGRI-KING DIESEL TRACTOR (1/72-12/78) |
| (141A) - OUTER DUAL STEEL REAR WHEELS, USED W/ 3-1/2 INCH OR 3-7/8 INCH DIAMETER AXLE SHAFT AND 38 INCH RIMS | (1270) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8736001) (1/72-12/78) |
| (144) - REAR WHEELS WEIGHTS | (1270) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8736001) (1/72-12/78) |
| (224) - DRAWBAR, WITH HITCH | (1270) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8736001) (1/72-12/78) |
| (226) - DRAWBAR, WITHOUT HITCH | (1270) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8736001) (1/72-12/78) |
| (250) - SEAT SUSPENSION, USED PRIOR TO TRACTOR SERIAL NUMBER 8693001 | (1270) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8736001) (1/72-12/78) |
| (254) - REAR WHEEL WEIGHT KITS, STARTER SET FOR 38 INCH OR 42 INCH CAST WHEEL | (1270) - CASE AGRI-KING TRACTOR (S/N 8736001 & AFTER) (1/73-12/78) |
| (384) - DRAWBAR, WITH HITCH | (1270) - CASE AGRI-KING TRACTOR (S/N 8736001 & AFTER) (1/73-12/78) |
| (386) - DRAWBAR, WITHOUT HITCH | (1270) - CASE AGRI-KING TRACTOR (S/N 8736001 & AFTER) (1/73-12/78) |
| (141C) - OUTER DUAL STEEL REAR WHEEL SPACER, USED WITH 3-7/8 INCH DIAMETER AXLE SHAFT | (1370) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8727601) (1/72-12/78) |
| (144) - REAR WHEEL WEIGHTS | (1370) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8727601) (1/72-12/78) |
| (224) - D.O.M. SYSTEM, DRAWBAR, WITH HITCH | (1370) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8727601) (1/72-12/78) |
| (226) - D.O.M. SYSTEM, DRAWBAR, WITHOUT HITCH | (1370) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8727601) (1/72-12/78) |
| (250) - SEAT SUSPENSION, USED PRIOR TO TRACTOR SERIAL NUMBER 8693001 | (1370) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8727601) (1/72-12/78) |
| (242) - REAR WHEEL WEIGHTS | (1370) - CASE AGRI-KING TRACTOR (S/N 8727601 & AFTER) (1/73-12/78) |
| (366) - DRAWBAR, WITH HITCH | (1370) - CASE AGRI-KING TRACTOR (S/N 8727601 & AFTER) (1/73-12/78) |
| (368) - DRAWBAR, WITHOUT HITCH | (1370) - CASE AGRI-KING TRACTOR (S/N 8727601 & AFTER) (1/73-12/78) |
| (142) - REAR WHEEL WEIGHTS | (1570) - CASE AGRI-KING DIESEL TRACTOR (1/76-12/78) |
| (236) - D.O.M. SYSTEM, DRAWBAR, WITH HITCH | (1570) - CASE AGRI-KING DIESEL TRACTOR (1/76-12/78) |
| (238) - D.O.M. SYSTEM, DRAWBAR, WITHOUT HITCH | (1570) - CASE AGRI-KING DIESEL TRACTOR (1/76-12/78) |
| (142) - REAR WHEEL WEIGHTS | (1570) - CASE AGRI-KING TRACTOR ("SPIRIT OF '76" OPTION) (1/76-12/76) |
| (236) - D.O.M. SYSTEM, DRAWBAR, WITH HITCH | (1570) - CASE AGRI-KING TRACTOR ("SPIRIT OF '76" OPTION) (1/76-12/76) |
| (238) - D.O.M. SYSTEM, DRAWBAR, WITHOUT HITCH | (1570) - CASE AGRI-KING TRACTOR ("SPIRIT OF '76" OPTION) (1/76-12/76) |
| (212) - REAR WHEEL WEIGHTS | (770) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8675001) (1/69-12/72) |
| (217A) - P.T.O. HOUSING | (770) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8675001) (1/69-12/72) |
| (282) - SEAT SUSPENSION | (770) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8675001) (1/69-12/72) |
| (244) - REAR WHEEL WEIGHTS | (770) - CASE AGRI-KING TRACTOR (S/N 8675001 & AFTER) (1/70-12/72) |
| (248) - P.T.O. HOUSING | (770) - CASE AGRI-KING TRACTOR (S/N 8675001 & AFTER) (1/70-12/72) |
| (318) - SEAT SUSPENSION, USED PRIOR TO TRACTOR S/N 8693001 | (770) - CASE AGRI-KING TRACTOR (S/N 8675001 & AFTER) (1/70-12/72) |
| (212) - REAR WHEEL WEIGHTS | (870) - CASE AGRI-KING TRACTOR (PRIOR TO P.I.N. 8675001) (1/69-12/74) |
| (217A) - P.T.O. HOUSING | (870) - CASE AGRI-KING TRACTOR (PRIOR TO P.I.N. 8675001) (1/69-12/74) |
| (282) - SEAT SUSPENSION | (870) - CASE AGRI-KING TRACTOR (PRIOR TO P.I.N. 8675001) (1/69-12/74) |
| (244) - REAR WHEEL WEIGHTS | (870) - CASE AGRI-KING TRACTOR (S/N 8675001 & AFTER) (1/70-12/74) |
| (248) - P.T.O. HOUSING | (870) - CASE AGRI-KING TRACTOR (S/N 8675001 & AFTER) (1/70-12/74) |
| (330) - SEAT SUSPENSION, USED PRIOR TO TRACTOR SERIAL NUMBER 8693001 | (870) - CASE AGRI-KING TRACTOR (S/N 8675001 & AFTER) (1/70-12/74) |
| (214) - REAR WHEEL WEIGHTS | (970) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8675001) (1/69-12/78) |
| (219A) - P.T.O. HOUSING | (970) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8675001) (1/69-12/78) |
| (284) - SEAT SUSPENSION | (970) - CASE AGRI-KING TRACTOR (PRIOR TO S/N 8675001) (1/69-12/78) |
| (214) - REAR WHEELS, VARIOUS TYPES, PRIOR TO S/N 8262800 | (430) - CASE AG & UTILITY TRACTOR (PRIOR TO S/N 8262800) (1/60-12/64) |
| (238) - ADJUSTABLE FRONT AXLE, PRIOR TO S/N 8262800 | (430) - CASE AG & UTILITY TRACTOR (PRIOR TO S/N 8262800) (1/60-12/64) |
| (256) - FRONT AXLE, 7000 LB. CAPACITY, PRIOR TO 8262800, UTILITY TRACTOR W/MODEL 42 SELF LEVELING LOADER | (430) - CASE AG & UTILITY TRACTOR (PRIOR TO S/N 8262800) (1/60-12/64) |
| (284) - SWINGING DRAFT ARMS, S/N 8211729 AND AFTER, EAGLE HITCH TRACTOR, PRIOR TO S/N 8262800 | (430) - CASE AG & UTILITY TRACTOR (PRIOR TO S/N 8262800) (1/60-12/64) |
| (292) - DRAFT ARMS AND LIFT LINKS, DRAFT-O-MATIC TRACTOR, PRIOR TO S/N 8262800 | (430) - CASE AG & UTILITY TRACTOR (PRIOR TO S/N 8262800) (1/60-12/64) |
| (293A) - DRAFT ARMS, OLD STYLE, DRAFT-O-MATIC TRACTOR, PRIOR TO S/N 8262800 | (430) - CASE AG & UTILITY TRACTOR (PRIOR TO S/N 8262800) (1/60-12/64) |
| (336) - FRONT END WEIGHTS AND BUMPERS, PRIOR TO S/N 8262800 | (430) - CASE AG & UTILITY TRACTOR (PRIOR TO S/N 8262800) (1/60-12/64) |
| (176) - HYDROSTATIC STEERING, ADJUSTABLE FRONT AXLE, 52" TO 80" | (430) - CASE DRAFT-O-MATIC TRACTOR (S/N 8262800 TO 8297800) (1/65-12/69) |
| (178) - HYDROSTATIC STEERING, ADJUSTABLE FRONT AXLE, 48" TO 72" | (430) - CASE DRAFT-O-MATIC TRACTOR (S/N 8262800 TO 8297800) (1/65-12/69) |
| (160) - REAR WHEELS, INTEGRAL TYPE, DEMOUNTABLE TYPE, REAR WHEEL WEIGHTS | (430) - CASE DRAFT-O-MATIC TRACTOR (S/N 8262800 TO 8297800) (1/65-12/69) |
| (175A) - ADJUSTABLE FRONT AXLE SUPPORTS | (430) - CASE DRAFT-O-MATIC TRACTOR (S/N 8262800 TO 8297800) (1/65-12/69) |
| (196) - DRAFT ARMS AND LIFT LINKS, DRAFT-O-MATIC | (430) - CASE DRAFT-O-MATIC TRACTOR (S/N 8262800 TO 8297800) (1/65-12/69) |
| (236) - GROOVE FENDERS, DRAWBAR, AND 430 SERIES STANDARD SEAT | (430) - CASE DRAFT-O-MATIC TRACTOR (S/N 8262800 TO 8297800) (1/65-12/69) |
| (184) - ADJUSTABLE FRONT AXLE, 52 INCH TO 80 INCH | (430) - CASE DRAFT-O-MATIC TRACTOR (S/N 8297801 TO 8650135) (1/65-12/69) |
| (185A) - ADJUSTABLE FRONT AXLE, 52 INCH TO 80 INCH, CONTINUED | (430) - CASE DRAFT-O-MATIC TRACTOR (S/N 8297801 TO 8650135) (1/65-12/69) |
| (186) - ADJUSTABLE FRONT AXLE, 48 INCH TO 72 INCH | (430) - CASE DRAFT-O-MATIC TRACTOR (S/N 8297801 TO 8650135) (1/65-12/69) |
| (187A) - ADJUSTABLE FRONT AXLE, 48 INCH TO 72 INCH, CONTINUED | (430) - CASE DRAFT-O-MATIC TRACTOR (S/N 8297801 TO 8650135) (1/65-12/69) |
| (166) - REAR WHEELS WITH 24 INCH RIMS, FOUR WHEEL, INTEGRAL | (430) - CASE DRAFT-O-MATIC TRACTOR (S/N 8297801 TO 8650135) (1/65-12/69) |
| (242) - BELT PULLEY | (430) - CASE DRAFT-O-MATIC TRACTOR (S/N 8297801 TO 8650135) (1/65-12/69) |
| (206) - DRAFT ARMS AND LIFT LINKS, DRAFT-O-MATIC | (430) - CASE DRAFT-O-MATIC TRACTOR (S/N 8297801 TO 8650135) (1/65-12/69) |
| (251C) - GROVE FENDERS | (430) - CASE DRAFT-O-MATIC TRACTOR (S/N 8297801 TO 8650135) (1/65-12/69) |
| (061E) - SEAT SUSPENSION | (1470) - CASE TRACTION KING DIESEL TRACTOR (1/69-12/72) |
| (6-76) - REAR WHEEL WEIGHTS | (1896) - CASE DIESEL TRACTOR (S/N 17895000 THRU 002 & UP) (1/87-12/89) |
| (6-82) - PTO HOUSING | (1896) - CASE DIESEL TRACTOR (S/N 17895000 THRU 002 & UP) (1/87-12/89) |
| (9-016) - DRAWBAR, SPECIAL WIDE SWING, WITHOUT HITCH | (1896) - CASE DIESEL TRACTOR (S/N 17895000 THRU 002 & UP) (1/87-12/89) |
| (9-494) - DRAWBAR, SPECIAL WIDE SWING, WITHOUT HITCH | (2090) - CASE DIESEL TRACTOR (1/78-12/83) |
| (6-076) - REAR WHEEL WEIGHTS | (2096) - CASE DIESEL TRACTOR (S/N 17897500 TO 17897505, 17897510 & AFTER (1/87-12/89) |
| (6-082) - PTO HOUSING | (2096) - CASE DIESEL TRACTOR (S/N 17897500 TO 17897505, 17897510 & AFTER (1/87-12/89) |
| (9-016) - DRAWBAR, SPECIAL WIDE SWING, WITHOUT HITCH | (2096) - CASE DIESEL TRACTOR (S/N 17897500 TO 17897505, 17897510 & AFTER (1/87-12/89) |
| (6-316) - REAR WHEEL WEIGHTS | (2290) - CASE DIESEL TRACTOR (1/78-12/83) |
| (9-490) - DRAWBAR, SPECIAL WIDE SWING, WITHOUT HITCH | (2290) - CASE DIESEL TRACTOR (1/78-12/83) |
| (9-010) - ROLLER DRAWBAR, WITH HITCH | (2394) - CASE DIESEL TRACTOR (1/85-12/87) |
| (9-012) - ROLLER DRAWBAR, WITHOUT HITCH | (2394) - CASE DIESEL TRACTOR (1/85-12/87) |
| (9-010) - ROLLER DRAWBAR, WITH HITCH | (2594) - CASE DIESEL TRACTOR (1/85-12/87) |
| (9-012) - ROLLER DRAWBAR, WITHOUT HITCH | (2594) - CASE DIESEL TRACTOR (1/85-12/87) |
| (9-010) - ROLLER DRAWBAR, WITH HITCH | (3394) - CASE DIESEL TRACTOR (1/85-12/87) |
| (9-012) - ROLLER DRAWBAR, WITHOUT HITCH | (3394) - CASE DIESEL TRACTOR (1/85-12/87) |
| (9-010) - ROLLER DRAWBAR, WITH HITCH | (3594) - CASE DIESEL TRACTOR (1/85-12/87) |
| (9-012) - ROLLER DRAWBAR, WITHOUT HITCH | (3594) - CASE DIESEL TRACTOR (1/85-12/87) |
| (092) - STANDARD REAR WHEELS | (930-SERIES) - CASE COMFORT KING TRACTOR (1/65-12/69) |
| (126) - REAR WHEEL WEIGHTS | (930-SERIES) - CASE COMFORT KING TRACTOR (1/65-12/69) |
| (156) - P.T.O. HOUSING | (930-SERIES) - CASE COMFORT KING TRACTOR (1/65-12/69) |
| (120) - REAR WHEELS | (930-SERIES) - CASE COMFORT KING WESTERN SPECIAL TRACTOR (S/N 8258382 & AFTER) (1/67-12/69) |
| (121A) - REAR WHEELS | (930-SERIES) - CASE COMFORT KING WESTERN SPECIAL TRACTOR (S/N 8258382 & AFTER) (1/67-12/69) |
| (124) - WEIGHTS, FRONT END | (930-SERIES) - CASE COMFORT KING WESTERN SPECIAL TRACTOR (S/N 8258382 & AFTER) (1/67-12/69) |
| (130) - FENDERS | (930-SERIES) - CASE COMFORT KING WESTERN SPECIAL TRACTOR (S/N 8258382 & AFTER) (1/67-12/69) |
| (03-01) - CAB A/C AND HEATER PLUMBING | (CM325) - STEIGER SERIES IV PANTHER TRACTOR (1/84-12/84) |
| (03-01) - CAB A/C AND HEATER PLUMBING | (CM360) - STEIGER SERIES IV PANTHER TRACTOR (1/83-12/84) |
| (03-01) - CAB A/C & HEATER PLUMBING | (CS-360) - STEIGER PANTHER SERIES IV TRACTOR (1/84-12/84) |
| (03-01) - CAB A/C AND HEATER PLUMBING | (KM-225) - STEIGER SERIES IV BEARCAT TRACTOR (1/83-12/84) |
| (03-01) - CAB A/C AND HEATER PLUMBING | (KM-280) - STEIGER SERIES IV COUGAR TRACTOR (1/83-12/84) |
| (03-01) - CAB A/C AND HEATER PLUMBING | (KM-325) - STEIGER SERIES IV PANTHER TRACTOR (1/84-12/84) |
| (03-01) - CAB A/C AND HEATER PLUMBING | (KM-360) - STEIGER SERIES IV PANTHER TRACTOR (1/83-12/84) |
| (03-01) - CAB A/C & HEATER PLUMBING | (KP-525) - STEIGER SERIES IV TIGER TRACTOR (1/84-12/85) |
| (03-01) - CAB A/C & HEATER PLUMBING | (KS-280) - STEIGER COUGAR SERIES IV TRACTOR (1/84-12/84) |
| (03-01) - CAB A/C & HEATER PLUMBING | (KS-325) - STEIGER PANTHER SERIES IV TRACTOR (1/84-12/84) |
| (03-01) - CAB A/C & HEATER PLUMBING | (KS-360) - STEIGER PANTHER SERIES IV TRACTOR (1/84-12/84) |
| (03-01) - CAB A/C AND HEATER PLUMBING | (SM-325) - STEIGER SERIES IV PANTHER TRACTOR (1/84-12/84) |
| (03-01) - A/C, HEATER ASSEMBLY AND CONTROLS, CAB | (ST450) - STEIGER SERIES III TIGER TRACTOR (1/77-12/82) |
| (03-01) - A/C, HEATER ASSEMBLY AND CONTROLS, CAB | (ST470) - STEIGER SERIES III TIGER TRACTOR (1/82-12/82) |
| (03-01) - CAB A/C & HEATER PLUMBING | (STEIGER) - PANTHER SERIES IV TRACTOR (7/83-12/87) |
| (124) - P.T.O. HOUSING | (1030) - CASE COMFORT KING DRAFT-O-MATIC TRACTOR (1/66-12/69) |
| (146) - THREE POINT HITCH, DRAFT ARMS | (1030) - CASE COMFORT KING DRAFT-O-MATIC TRACTOR (1/66-12/69) |
| (12) - REAR WHEEL WEIGHTS | (1190) - TRACTOR - SPECIAL EQUIPMENT (1/80-12/80) |
| (12) - REAR WHEEL WEIGHTS | (1290) - TRACTOR - SPECIAL EQUIPMENT (1/80-12/80) |
| (12) - REAR WHEEL WEIGHTS | (1390) - TRACTOR - SPECIAL EQUIPMENT (1/80-12/80) |
| (12) - REAR WHEEL WEIGHTS | (1490) - TRACTOR - SPECIAL EQUIPMENT (1/80-12/80) |
| (T03-1) - REAR WHEEL WEIGHTS | (1690) - CASE DIESEL TRACTOR (1/80-12/83) |
| (12) - REAR WHEEL WEIGHTS | (1690) - TRACTOR - SPECIAL EQUIPMENT (1/80-12/80) |
| (182) - ADJUSTABLE FRONT AXLE - 52" TO 80" | (470) - CASE TRACTOR (S/N 8656925 & AFTER) (1/70-12/72) |
| (186) - ADJUSTABLE FRONT AXLE - 48" TO 72" | (470) - CASE TRACTOR (S/N 8656925 & AFTER) (1/70-12/72) |
| (160) - REAR WHEELS AND WEIGHTS, STANDARD 4 WHEEL TRACTOR | (470) - CASE TRACTOR (S/N 8656925 & AFTER) (1/70-12/72) |
| (208) - DRAFT ARMS AND LIFT LINKS, DRAFT-O-MATIC | (470) - CASE TRACTOR (S/N 8656925 & AFTER) (1/70-12/72) |
| (214) - REAR WHEELS, VARIOUS TYPES, PRIOR TO S/N 8262800 | (530) - CASE AG & UTILITY TRACTOR (PRIOR TO S/N 8262800) (1/60-12/64) |
| (238) - ADJUSTABLE FRONT AXLE, PRIOR TO S/N 8262800 | (530) - CASE AG & UTILITY TRACTOR (PRIOR TO S/N 8262800) (1/60-12/64) |
| (256) - FRONT AXLE, 7000 LB. CAPACITY, PRIOR TO 8262800, UTILITY TRACTOR W/MODEL 42 SELF LEVELING LOADER | (530) - CASE AG & UTILITY TRACTOR (PRIOR TO S/N 8262800) (1/60-12/64) |
| (284) - SWINGING DRAFT ARMS, S/N 8211729 AND AFTER, EAGLE HITCH TRACTOR, PRIOR TO S/N 8262800 | (530) - CASE AG & UTILITY TRACTOR (PRIOR TO S/N 8262800) (1/60-12/64) |
| (292) - DRAFT ARMS AND LIFT LINKS, DRAFT-O-MATIC TRACTOR, PRIOR TO S/N 8262800 | (530) - CASE AG & UTILITY TRACTOR (PRIOR TO S/N 8262800) (1/60-12/64) |
| (293A) - DRAFT ARMS, OLD STYLE, DRAFT-O-MATIC TRACTOR, PRIOR TO S/N 8262800 | (530) - CASE AG & UTILITY TRACTOR (PRIOR TO S/N 8262800) (1/60-12/64) |
| (336) - FRONT END WEIGHTS AND BUMPERS, PRIOR TO S/N 8262800 | (530) - CASE AG & UTILITY TRACTOR (PRIOR TO S/N 8262800) (1/60-12/64) |
| (176) - HYDROSTATIC STEERING, ADJUSTABLE FRONT AXLE, 52" TO 80" | (530) - CASE DRAFT-O-MATIC TRACTOR (S/N 8262800 TO 8297800) (1/65-12/70) |
| (178) - HYDROSTATIC STEERING, ADJUSTABLE FRONT AXLE, 48" TO 72" | (530) - CASE DRAFT-O-MATIC TRACTOR (S/N 8262800 TO 8297800) (1/65-12/70) |
| (160) - REAR WHEELS, INTEGRAL TYPE, DEMOUNTABLE TYPE, REAR WHEEL WEIGHTS | (530) - CASE DRAFT-O-MATIC TRACTOR (S/N 8262800 TO 8297800) (1/65-12/70) |
| (175A) - ADJUSTABLE FRONT AXLE SUPPORTS | (530) - CASE DRAFT-O-MATIC TRACTOR (S/N 8262800 TO 8297800) (1/65-12/70) |
| (196) - DRAFT ARMS AND LIFT LINKS, DRAFT-O-MATIC | (530) - CASE DRAFT-O-MATIC TRACTOR (S/N 8262800 TO 8297800) (1/65-12/70) |
| (184) - ADJUSTABLE FRONT AXLE, 52 INCH TO 80 INCH | (530) - CASE DRAFT-O-MATIC TRACTOR (S/N 8297801 TO 8650135) (1/65-12/70) |
| (185A) - ADJUSTABLE FRONT AXLE, 52 INCH TO 80 INCH, CONTINUED | (530) - CASE DRAFT-O-MATIC TRACTOR (S/N 8297801 TO 8650135) (1/65-12/70) |
| (186) - ADJUSTABLE FRONT AXLE, 48 INCH TO 72 INCH | (530) - CASE DRAFT-O-MATIC TRACTOR (S/N 8297801 TO 8650135) (1/65-12/70) |
| (187A) - ADJUSTABLE FRONT AXLE, 48 INCH TO 72 INCH, CONTINUED | (530) - CASE DRAFT-O-MATIC TRACTOR (S/N 8297801 TO 8650135) (1/65-12/70) |
| (166) - REAR WHEELS WITH 24 INCH RIMS, FOUR WHEEL, INTEGRAL | (530) - CASE DRAFT-O-MATIC TRACTOR (S/N 8297801 TO 8650135) (1/65-12/70) |
| (242) - BELT PULLEY | (530) - CASE DRAFT-O-MATIC TRACTOR (S/N 8297801 TO 8650135) (1/65-12/70) |
| (206) - DRAFT ARMS AND LIFT LINKS, DRAFT-O-MATIC | (530) - CASE DRAFT-O-MATIC TRACTOR (S/N 8297801 TO 8650135) (1/65-12/70) |
| (251C) - GROVE FENDERS | (530) - CASE DRAFT-O-MATIC TRACTOR (S/N 8297801 TO 8650135) (1/65-12/70) |
| (182) - ADJUSTABLE FRONT AXLE - 52" TO 80" | (570) - CASE TRACTOR (S/N 8656925 & AFTER) (1/70-12/72) |
| (186) - ADJUSTABLE FRONT AXLE - 48" TO 72" | (570) - CASE TRACTOR (S/N 8656925 & AFTER) (1/70-12/72) |
| (160) - REAR WHEELS AND WEIGHTS, STANDARD 4 WHEEL TRACTOR | (570) - CASE TRACTOR (S/N 8656925 & AFTER) (1/70-12/72) |
| (208) - DRAFT ARMS AND LIFT LINKS, DRAFT-O-MATIC | (570) - CASE TRACTOR (S/N 8656925 & AFTER) (1/70-12/72) |
| (250) - PLATFORMS | (570) - CASE TRACTOR (S/N 8656925 & AFTER) (1/70-12/72) |
| (242) - FRONT END WEIGHTS | (730 SERIES) - CASE COMFORT KING DRAFT-O-MATIC TRACTORS (PRIOR TO S/N 8253500) (1/60-12/69) |
| (268) - REAR AXLE AND FINAL DRIVE, HIGH CLEARANCE | (730 SERIES) - CASE COMFORT KING DRAFT-O-MATIC TRACTORS (PRIOR TO S/N 8253500) (1/60-12/69) |
| (282) - REAR WHEEL WEIGHTS, GENERAL PURPOSE, FOUR WHEEL AND WESTERN, 730 GROVE | (730 SERIES) - CASE COMFORT KING DRAFT-O-MATIC TRACTORS (PRIOR TO S/N 8253500) (1/60-12/69) |
| (108) - POWER STEERING DRAG LINK, 4 WHEEL AND WESTERN AND 730 GROVE ONLY | (730 SERIES) - CASE COMFORT KING DRAFT-O-MATIC TRACTORS (S/N 8253501 & AFTER) (1/65-12/69) |
| (125C) - FRONT END WEIGHTS, ALL 730 AND 830, EXCEPT GROVE, AND 730 GROVE ONLY | (730 SERIES) - CASE COMFORT KING DRAFT-O-MATIC TRACTORS (S/N 8253501 & AFTER) (1/65-12/69) |
| (158) - REAR AXLE, HIGH CLEARANCE | (730 SERIES) - CASE COMFORT KING DRAFT-O-MATIC TRACTORS (S/N 8253501 & AFTER) (1/65-12/69) |
| (169C) - REAR WHEEL WEIGHTS, GENERAL PURPOSE AND 4 WHEEL WETERN, 730 GROVE | (730 SERIES) - CASE COMFORT KING DRAFT-O-MATIC TRACTORS (S/N 8253501 & AFTER) (1/65-12/69) |
| (192) - POWER TAKE-OFF HOUSING, AND USED W/OUT P.T.O. | (730 SERIES) - CASE COMFORT KING DRAFT-O-MATIC TRACTORS (S/N 8253501 & AFTER) (1/65-12/69) |
| (171A) - AUXILIARY VALVE CONTROLS, ALL 730 AND 830 EXCEPT GROVE, AND 730 GROVE | (730 SERIES) - CASE COMFORT KING DRAFT-O-MATIC TRACTORS (S/N 8253501 & AFTER) (1/65-12/69) |
| (242) - FRONT END WEIGHTS | (830-SERIES) - CASE COMFORT KING DRAFT-O-MATIC TRACTORS (PRIOR TO S/N 8253500) (1/60-12/69) |
| (268) - REAR AXLE AND FINAL DRIVE, HIGH CLEARANCE | (830-SERIES) - CASE COMFORT KING DRAFT-O-MATIC TRACTORS (PRIOR TO S/N 8253500) (1/60-12/69) |
| (282) - REAR WHEEL WEIGHTS, GENERAL PURPOSE, FOUR WHEEL AND WESTERN, 730 GROVE | (830-SERIES) - CASE COMFORT KING DRAFT-O-MATIC TRACTORS (PRIOR TO S/N 8253500) (1/60-12/69) |
| (125C) - FRONT END WEIGHTS, ALL 730 AND 830, EXCEPT GROVE, AND 730 GROVE ONLY | (830-SERIES) - CASE COMFORT KING DRAFT-O-MATIC TRACTORS (S/N 8253501 & AFTER) (1/65-12/69) |
| (158) - REAR AXLE, HIGH CLEARANCE | (830-SERIES) - CASE COMFORT KING DRAFT-O-MATIC TRACTORS (S/N 8253501 & AFTER) (1/65-12/69) |
| (169C) - REAR WHEEL WEIGHTS, GENERAL PURPOSE AND 4 WHEEL WETERN, 730 GROVE | (830-SERIES) - CASE COMFORT KING DRAFT-O-MATIC TRACTORS (S/N 8253501 & AFTER) (1/65-12/69) |
| (192) - POWER TAKE-OFF HOUSING, AND USED W/OUT P.T.O. | (830-SERIES) - CASE COMFORT KING DRAFT-O-MATIC TRACTORS (S/N 8253501 & AFTER) (1/65-12/69) |
| (171A) - AUXILIARY VALVE CONTROLS, ALL 730 AND 830 EXCEPT GROVE, AND 730 GROVE | (830-SERIES) - CASE COMFORT KING DRAFT-O-MATIC TRACTORS (S/N 8253501 & AFTER) (1/65-12/69) |
| (9-032) - CAB MOUNTINGS, PRIOR TO P.I.N. JJE0013400, FRONT ISO-MOUNTS | (895) - CASE IH TRACTOR (NORTH AMERICA) (1/91-12/94) |
| (074) - FRONT AXLE | (M570) - CASE MILITARY AIRCRAFT TOWING TRACTOR (DSA700-69-C-H570) (1/70-12/72) |
| (086) - DRAWBAR | (M570) - CASE MILITARY AIRCRAFT TOWING TRACTOR (DSA700-69-C-H570) (1/70-12/72) |
| (074) - ADJUSTABLE FRONT AXLE | (M570AT) - CASE MILITARY AIRCRAFT TOWING TRACTOR (DSA700-72-C-8476) (1/70-12/72) |
| (078) - FRONT WHEELS | (M570AT) - CASE MILITARY AIRCRAFT TOWING TRACTOR (DSA700-72-C-8476) (1/70-12/72) |
| (086) - DRAWBAR | (M570AT) - CASE MILITARY AIRCRAFT TOWING TRACTOR (DSA700-72-C-8476) (1/70-12/72) |
