| Узел | Модель |
|---|
| (B04) - MAIN FRAME WITH ROCKSHAFT AND WHEEL GANGS, 3010 AND 4010 THREE RANK | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B06) - MAIN FRAME WITH ROCKSHAFT AND WHEEL GANGS, 2310 THRU 4010 FOUR RANK | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B08) - MAIN FRAME WITH ROCKSHAFT AND WHEEL GANGS, 4710 AND 5010 FOUR RANK | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B10) - WING FRAME WITH ROCKSHAFT AND WHEEL GANGS, 2310 THRU 3310 FOUR RANK AND 3010 THREE RANK | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B12) - WING FRAME WITH ROCKSHAFT AND WHEEL GANGS, 3710 THREE RANK, 4010 THREE AND FOUR RANK | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B14) - WING FRAME WITH ROCKSHAFT AND WHEEL GANGS, FIVE SECTION INNER | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B16) - WING FRAMES WITH ROCKSHAFT AND WHEEL GANGS, FIVE SECTION OUTER | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B04) - MAIN FRAME WITH ROCKSHAFT & WHEEL GANGS, 2412 - 4412 3 RANK | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B06) - MAIN FRAME WITH ROCKSHAFT & WHEEL GANG, 2412 - 4412, 4 RANK | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B08) - MAIN FRAME WITH ROCKSHAFT & WHEEL GANGS, 4812, 3 & 4 RANK | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B10) - MAIN FRAME WITH ROCKSHAFT & WHEEL GANGS, 5612 & 6012, 3 & 4 RANK | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B12) - WING FRAME WITH ROCKSHAFT & WHEEL GANGS, 2412 - 3212, 3 & 4 RANK, RIGHT-HAND WING SHOWN | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B14) - WING FRAMES WITH ROCKSHAFTS & WHEEL GANGS, 3612 - 4412, 3 & 4 RANK, RIGHT HAND WING SHOWN | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B16) - WING FRAMES WITH ROCKSHAFT & WHEEL GANGS, 5 SECTION OUTER RIGHT HAND WING SHOWN | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B18) - WING FRAME WITH ROCKSHAFT & WHEEL GANGS, 5 SECTION INNER RIGHT HAND WING SHOWN | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (E-09) - ROCKSHAFT UNIT, BUILT PRIOR TO JUNE, 1976 AND WITH IDENTIFICATION PLATE C111 AND C1121 | (55) - INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (D-28) - MAIN AND WING FRAME ROCKSHAFTS, BUILT PRIOR TO AUGUST, 1976 SEASON | (45) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/64-12/81) |
| (32) - MAIN GANG, FRONT & REAR | (D39) - CASE DISK HARROW (1/70-12/80) |
| (34) - WING GANG, FRONT & REAR | (D39) - CASE DISK HARROW (1/70-12/80) |
| (026) - FRONT LEFT CENTER GANG, 9 INCH (228.6 MM) SPACING | (E30) - CASE DISK HARROW (1/72-12/80) |
| (028) - FRONT RIGHT CENTER GANG, 9 INCH (228.6 MM) SPACING | (E30) - CASE DISK HARROW (1/72-12/80) |
| (030) - REAR LEFT CENTER GANG, 9 INCH (228.6 MM) SPACING | (E30) - CASE DISK HARROW (1/72-12/80) |
| (032) - REAR RIGHT CENTER GANG, 9 INCH (228.6 MM) SPACING | (E30) - CASE DISK HARROW (1/72-12/80) |
| (034) - FRONT LEFT WING GANG, 9 INCH (228.6 MM) SPACING, MODEL 9-306 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (036) - FRONT LEFT WING GANG, 9 INCH (228.6 MM) SPACING, MODEL 9-324 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (038) - FRONT LEFT WING GANG, 9 INCH (228.6 MM) SPACING, MODEL 9-360 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (040) - FRONT RIGHT WING GANG, 9 INCH (228.6 MM) SPACING, MODEL 9-306 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (042) - FRONT RIGHT WING GANG, 9 INCH (228.6 MM) SPACING, MODEL 9-234 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (044) - FRONT RIGHT WING GANG, 9 INCH (228.6 MM) SPACING, MODEL 9-360 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (046) - REAR LEFT WING GANG, 9 INCH (228.6 MM) SPACING, MODEL 9-306 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (048) - REAR LEFT WING GANG, 9 INCH (228.6 MM) SPACING, MODEL 9-324 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (050) - REAR LEFT WING GANG, 9 INCH (228.6 MM) SPACING, MODEL 9-360 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (052) - REAR RIGHT WING GANG, 9 INCH (228.6 MM) SPACING, MODEL 9-306 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (054) - REAR RIGHT WING GANG, 9 INCH (228.6 MM) SPACING, MODEL 9-324 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (056) - REAR RIGHT WING GANG, 9 INCH (228.6 MM) SPACING, MODEL 9-360 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (058) - FRONT LEFT CENTER GANG, 10-1/2 INCH (266.7 MM) SPACING | (E30) - CASE DISK HARROW (1/72-12/80) |
| (060) - FRONT RIGHT CENTER GANG, 10-1/2 INCH (266.7 MM) SPACING | (E30) - CASE DISK HARROW (1/72-12/80) |
| (062) - REAR LEFT CENTER GANG, 10-1/2 INCH (266.7 MM) SPACING | (E30) - CASE DISK HARROW (1/72-12/80) |
| (064) - REAR RIGHT CENTER GANG, 10-1/2 INCH (266.7 MM) SPACING | (E30) - CASE DISK HARROW (1/72-12/80) |
| (066) - FRONT LEFT WING GANG, 10-1/2 INCH (266.7 MM) SPACING, MODEL 11-318 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (068) - FRONT LEFT WING GANG, 10-1/2 INCH (266.7 MM) SPACING, MODEL 11-339 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (070) - FRONT LEFT WING GANG, 10-1/2 INCH (266.7 MM) SPACING, MODEL 11-360 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (072) - FRONT RIGHT WING GANG, 10-1/2 INCH (266.7 MM) SPACING, MODEL 11-318 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (074) - FRONT RIGHT WING GANG, 10-1/2 INCH (266.7 MM) SPACING, MODEL 11-399 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (076) - FRONT RIGHT WING GANG, 10-1/2 INCH (266.7 MM) SPACING, MODEL 11-360 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (078) - REAR LEFT WING GANG, 10-1/2 INCH (266.7 MM) SPACING, MODEL 11-318 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (080) - REAR LEFT WING GANG, 10-1/2 INCH (266.7 MM) SPACING, MODEL 11-339 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (082) - REAR LEFT WING GANG, 10-1/2 INCH (266.7 MM) SPACING, MODEL 11-360 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (084) - REAR RIGHT WING GANG, 10-1/2 INCH (266.7 MM) SPACING, MODEL 11-318 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (086) - REAR RIGHT WING GANG, 10-1/2 INCH (266.7 MM) SPACING, MODEL 11-339 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (088) - REAR RIGHT WING GANG, 10-1/2 INCH (266.7 MM) SPACING, MODEL 11-360 | (E30) - CASE DISK HARROW (1/72-12/80) |
| (22) - GANGS, G109, 9 INCH (228.6 MM) SPACING | (G-SERIES) - CASE HARROWS (1/70-12/81) |
| (28) - GANGS, G110, 10-1/2 INCH (266.7 MM) SPACING | (G-SERIES) - CASE HARROWS (1/70-12/81) |
| (34) - GANGS, G119, 9 INCH (228.6 MM) FRONT AND 10-1/2 INCH (266.7 MM) REAR SPACING | (G-SERIES) - CASE HARROWS (1/70-12/81) |
| (16) - FRONT GANG FRAMES | (K23B) - CASE HARROW (1/82-12/83) |
| (18) - REAR GANG FRAMES | (K23B) - CASE HARROW (1/82-12/83) |
| (20) - MAIN GANG, FRONT, RIGID | (K23B) - CASE HARROW (1/82-12/83) |
| (22) - MAIN GANG, REAR, RIGID | (K23B) - CASE HARROW (1/82-12/83) |
| (24) - WING GANG, FRONT, RIGID | (K23B) - CASE HARROW (1/82-12/83) |
| (26) - WING GANG, REAR, RIGID | (K23B) - CASE HARROW (1/82-12/83) |
| (28) - MAIN GANG, FRONT, FLEX | (K23B) - CASE HARROW (1/82-12/83) |
| (30) - MAIN GANG, REAR, FLEX | (K23B) - CASE HARROW (1/82-12/83) |
| (32) - WING GANG, FRONT, FLEX | (K23B) - CASE HARROW (1/82-12/83) |
| (34) - WING GANG, REAR, FLEX | (K23B) - CASE HARROW (1/82-12/83) |
| (13-04) - ROCKSHAFT | (55) - MCCORMICK-INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (06-10) - HITCH TRUSS AND TIE RODS (28 FT. AND 36 FT. MACHINES) | (75) - MCCORMICK-INTERNATIONAL WING-TYPE CHISEL PLOW (1/65-12/65) |
| (16) - FRONT INSIDE GANG | (K23) - CASE TANDEM DISK HARROW (1/76-12/81) |
| (18) - REAR INSIDE GANG | (K23) - CASE TANDEM DISK HARROW (1/76-12/81) |
| (20) - FRONT WING GANG | (K23) - CASE TANDEM DISK HARROW (1/76-12/81) |
| (22) - REAR WING GANG | (K23) - CASE TANDEM DISK HARROW (1/76-12/81) |
| (32) - FRONT INSIDE GANG, TRUNION MOUNTED BEARINGS | (K23) - CASE TANDEM DISK HARROW (1/76-12/81) |
| (34) - REAR INSIDE GANG, TRUNION MOUNTED BEARINGS | (K23) - CASE TANDEM DISK HARROW (1/76-12/81) |
| (36) - FRONT WING GANG, TRUNION MOUNTED BEARINGS | (K23) - CASE TANDEM DISK HARROW (1/76-12/81) |
| (38) - REAR WING GANG, TRUNION MOUNTED BEARINGS | (K23) - CASE TANDEM DISK HARROW (1/76-12/81) |
| (16) - FRONT INSIDE GANG | (K23A) - CASE TANDEM DISK HARROW (1/76-12/81) |
| (18) - REAR INSIDE GANG | (K23A) - CASE TANDEM DISK HARROW (1/76-12/81) |
| (20) - FRONT WING GANG | (K23A) - CASE TANDEM DISK HARROW (1/76-12/81) |
| (22) - REAR WING GANG | (K23A) - CASE TANDEM DISK HARROW (1/76-12/81) |
| (32) - FRONT INSIDE GANG, TRUNION MOUNTED BEARINGS | (K23A) - CASE TANDEM DISK HARROW (1/76-12/81) |
| (34) - REAR INSIDE GANG, TRUNION MOUNTED BEARINGS | (K23A) - CASE TANDEM DISK HARROW (1/76-12/81) |
| (36) - FRONT WING GANG, TRUNION MOUNTED BEARINGS | (K23A) - CASE TANDEM DISK HARROW (1/76-12/81) |
| (38) - REAR WING GANG, TRUNION MOUNTED BEARINGS | (K23A) - CASE TANDEM DISK HARROW (1/76-12/81) |
| (9-68) - FRONT ENGINE SUPPORT, REAR MOUNTING PLATE AND CONNECTIONS | (DT-429) - 6 CYLINDER TURBO DIESEL ENGINE (1/66-12/70) |
| (9-04) - MAIN FRAME 3 RANK | (NFX) - CASE IH AIR TILL DRILL (1/95-12/00) |
| (9-06) - MAIN FRAME 4 RANK | (NFX) - CASE IH AIR TILL DRILL (1/95-12/00) |
| (9-08) - WING FRAME 3 RANK, 2310, 2710, 3010, 2412, AND 2812 DRILLS | (NFX) - CASE IH AIR TILL DRILL (1/95-12/00) |
| (9-10) - WING FRAME 4 RANK, 2310, 2710, 3010, 2412, AND 2812 DRILLS | (NFX) - CASE IH AIR TILL DRILL (1/95-12/00) |
| (9-12) - WING FRAME 3 RANK 2010 AND 2012 DRILLS | (NFX) - CASE IH AIR TILL DRILL (1/95-12/00) |
| (9-14) - WING FRAME 4 RANK 2010 AND 2012 DRILLS | (NFX) - CASE IH AIR TILL DRILL (1/95-12/00) |
| (9-01) - MAIN FRAME | (485) - CASE IH DISK HARROW (1/75-12/02) |
| (9-01) - MAIN FRAME | (501) - CASE IH DISK HARROW (1/76-12/02) |
| (146) - GRAIN BIN DISCHARGE AUGER | (1660) - CASE COMBINE (1/86-12/89) |
| (12[1]) - CLUTCH SHAFT AND HOUSING | (1665) - CASE COMBINE (1/68-12/70) |
| (084) - FEEDER SPOUT, STANDARD HEADER | (1010) - CASE COMBINE (1/63-12/03) |
| (262) - FLYWHEEL, FLYWHEEL HOUSING AND CLUTCH | (414) - INTERNATIONAL HARVESTER COTTON PICKER (1/60-12/77) |
| (262) - FLYWHEEL, FLYWHEEL HOUSING AND CLUTCH | (420) - INTERNATIONAL HARVESTER COTTON PICKER (1/60-12/77) |
| (10) - MAIN DRIVE SPROCKETS AND TIGHTENERS, MODELS 600, 660, 700, 900, 960 | (F345) - CASE CORN HEAD (1/63-12/67) |
| (12) - MAIN DRIVE SPROCKETS AND TIGHTENERS, MODEL 800 | (F345) - CASE CORN HEAD (1/63-12/67) |
| (14) - MAIN DRIVE SPROCKETS AND TIGHTENERS, MODELS 1000, 1010, 1060 | (F345) - CASE CORN HEAD (1/63-12/67) |
| (9-028) - 6 BAT REEL, SINGLE ECCENTRIC, PLASTIC TINES, 15.0, 17.5 AND 20.0 HEADER, HART CARTER | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9A-08) - 6 BAT REEL, STEEL TINES | (1010) - GRAIN HEADER (S/N JJC0200001 THROUGH JJC0300000) (6/93-12/04) |
| (9A-18) - 6 BAT REEL, PLASTIC TINES, 15.0, 17.5 AND 20.0 FOOT HEADER | (1010) - GRAIN HEADER (S/N JJC0200001 THROUGH JJC0300000) (6/93-12/04) |
| (9A-20) - 6 BAT REEL, PLASTIC TINES, 15.0, 17.5 AND 20.0 FOOT HEADER | (1010) - GRAIN HEADER (S/N JJC0200001 THROUGH JJC0300000) (6/93-12/04) |
| (9A-22) - 6 BAT REEL, PLASTIC TINES, 22.5, 25.0 AND 30.0 FOOT HEADER | (1010) - GRAIN HEADER (S/N JJC0200001 THROUGH JJC0300000) (6/93-12/04) |
| (9A-22) - 6 BAT REEL, SINGLE ECCENTRIC, PLASTIC TINES, 15, 16-1/2, 17-1/2 AND 20 FOOT HEADER (HART-CARTER) | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9A-02) - 6 BAT REEL, STEEL TINES | (1020) - GRAIN HEADER (S/N JJC0215001 TO JJC0227000) (12/94-12/02) |
| (9A-08) - 6 BAT REEL, PLASTIC TINES, 15.0, 16.5, 17.5 AND 20.0 FOOT HEADER | (1020) - GRAIN HEADER (S/N JJC0215001 TO JJC0227000) (12/94-12/02) |
| (9A-10) - 6 BAT REEL, PLASTIC TINES, 15.0, 16.5, 17.5 AND 20.0 FOOT HEADER (CONT'D) | (1020) - GRAIN HEADER (S/N JJC0215001 TO JJC0227000) (12/94-12/02) |
| (9A-12) - 6 BAT REEL, PLASTIC TINES, 22.5, 25.0 AND 30.0 FOOT HEADER | (1020) - GRAIN HEADER (S/N JJC0215001 TO JJC0227000) (12/94-12/02) |
| (9-04) - MAIN FRAME, UPPER | (3204) - CASE IH DISC MOWER (1/87-12/88) |
| (9-04) - MAIN FRAME, UPPER | (3205) - CASE IH DISC MOWER (1/87-12/88) |
| (9-04) - MAIN FRAME, UPPER | (3206) - CASE IH DISC MOWER (1/87-12/88) |
| (6-180) - FRONT AXLE AND DIFFERENTIAL ASSEMBLY, RIGHT HAND TRUNNION AND SPINDLE | (4490) - CASE TRACTOR (1/79-12/83) |
| (6-182) - FRONT AXLE AND DIFFERENTIAL ASSEMBLY, LEFT HAND TRUNNION AND SPINDLE | (4490) - CASE TRACTOR (1/79-12/83) |
| (6-196) - REAR AXLE AND DIFFERENTIAL ASSEMBLY, RIGHT HAND TRUNNION AND SPINDLE | (4490) - CASE TRACTOR (1/79-12/83) |
| (6-198) - REAR AXLE AND DIFFERENTIAL ASSEMBLY, LEFT HAND TRUNNION AND SPINDLE | (4490) - CASE TRACTOR (1/79-12/83) |
| (6-186) - FRONT AXLE ASSEMBLY RIGHT TRUNNION AND SPINDLE | (4494) - CASE IH TRACTOR (1/85-12/87) |
| (6-188) - FRONT AXLE ASSEMBLY RIGHT TRUNNION AND SPINDLE | (4494) - CASE IH TRACTOR (1/85-12/87) |
| (6-190) - FRONT AXLE ASSEMBLY RIGHT TRUNNION AND SPINDLE | (4494) - CASE IH TRACTOR (1/85-12/87) |
| (6-192) - FRONT AXLE ASSEMBLY LEFT TRUNNION AND SPINDLE | (4494) - CASE IH TRACTOR (1/85-12/87) |
| (6-194) - FRONT AXLE ASSEMBLY LEFT TRUNNION AND SPINDLE | (4494) - CASE IH TRACTOR (1/85-12/87) |
| (6-196) - FRONT AXLE ASSEMBLY, TRUNNION WITH BEARING, AXLE SERIAL NO. 13015953 AND AFTER | (4494) - CASE IH TRACTOR (1/85-12/87) |
| (6-228) - REAR AXLE ASSEMBLY RIGHT TRUNNION AND SPINDLE, TRUNNION WITH BUSHING | (4494) - CASE IH TRACTOR (1/85-12/87) |
| (6-230) - REAR AXLE ASSEMBLY RIGHT TRUNNION & SPINDLE, TRUNNION WITH BEARING, PRIOR TO AXLE SERIAL NO. 1305953 | (4494) - CASE IH TRACTOR (1/85-12/87) |
| (6-232) - REAR AXLE ASSEMBLY RIGHT TRUNNION & SPINDLE, TRUNNION WITH BEARING, AXLE SERIAL NO. 1305953 & AFTER | (4494) - CASE IH TRACTOR (1/85-12/87) |
| (6-234) - REAR AXLE ASSEMBLY, LEFT TRUNNION AND SPINDLE, TRUNNION WITH BUSHING | (4494) - CASE IH TRACTOR (1/85-12/87) |
| (6-236) - REAR AXLE ASSEMBLY, LEFT TRUNNION AND SPINDLE, TRUNNION WITH BEARING, PRIOR TO AXLE S/N 13015953 | (4494) - CASE IH TRACTOR (1/85-12/87) |
| (6-238) - REAR AXLE AND SPINDLE, LEFT TRUNNION AND SPINDLE, TRUNNION WITH BEARING, AXLE S/N 13015953 AND AFTER | (4494) - CASE IH TRACTOR (1/85-12/87) |
| (6-180) - FRONT AXLE AND DIFFERENTIAL ASSEMBLY, R.H. TRUNNION AND SPINDLE | (4690) - CASE TRACTOR (1/79-12/83) |
| (6-182) - FRONT AXLE AND DIFFERENTIAL ASSEMBLY, L.H. TRUNNION AND SPINDLE | (4690) - CASE TRACTOR (1/79-12/83) |
| (6-196) - REAR AXLE AND DIFFERENTIAL ASSEMBLY, RIGHT HAND TRUNNION AND SPINDLE | (4690) - CASE TRACTOR (1/79-12/83) |
| (6-198) - REAR AXLE AND DIFFERENTIAL ASSEMBLY, LEFT HAND TRUNNION AND SPINDLE | (4690) - CASE TRACTOR (1/79-12/83) |
| (6-186) - FRONT AXLE ASSEMBLY, RIGHT TRUNNION AND SPINDLE, TRUNNION WITH BUSHING | (4694) - CASE IH TRACTOR (1/85-12/86) |
| (6-188) - FRONT AXLE ASSEMBLY, RIGHT TRUNNION AND SPINDLE, TRUNNION WITH BEARING, PRIOR TO AXLE S/N 13015953 | (4694) - CASE IH TRACTOR (1/85-12/86) |
| (6-190) - FRONT AXLE ASSEMBLY, RIGHT TRUNNION AND SPINDLE, TRUNNION WITH BEARING, AXLE S/N 13015953 AND AFTER | (4694) - CASE IH TRACTOR (1/85-12/86) |
| (6-192) - FRONT AXLE ASSEMBLY, LEFT TRUNNION AND SPINDLE, TRUNNION WITH BUSHING | (4694) - CASE IH TRACTOR (1/85-12/86) |
| (6-194) - FRONT AXLE ASSEMBLY, LEFT TRUNNION AND SPINDLE, TRUNNION WITH BEARING, PRIOR TO AXLE S/N 13015953 | (4694) - CASE IH TRACTOR (1/85-12/86) |
| (6-196) - FRONT AXLE ASSEMBLY, LEFT TRUNNION AND SPINDLE, TRUNNION WITH BEARING, AXLE S/N 13015953 AND AFTER | (4694) - CASE IH TRACTOR (1/85-12/86) |
| (6-228) - REAR AXLE ASSEMBLY, RIGHT TRUNNION AND SPINDLE, TRUNNION WITH BUSHING | (4694) - CASE IH TRACTOR (1/85-12/86) |
| (6-230) - REAR AXLE ASSEMBLY, RIGHT TRUNNION AND SPINDLE, TRUNNION WITH BEARING, PRIOR TO AXLE S/N 13015953 | (4694) - CASE IH TRACTOR (1/85-12/86) |
| (6-232) - REAR AXLE ASSEMBLY, RIGHT TRUNNION AND SPINDLE, TRUNNION WITH BEARING, AXLE S/N 13015953 AND AFTER | (4694) - CASE IH TRACTOR (1/85-12/86) |
| (6-234) - REAR AXLE ASSEMBLY, LEFT TRUNNION AND SPINDLE, TRUNNION WITH BUSHING | (4694) - CASE IH TRACTOR (1/85-12/86) |
| (6-236) - REAR AXLE ASSEMBLY, LEFT TRUNNION AND SPINDLE, TRUNNION WITH BEARING, PRIOR TO AXLE S/N 13015953 | (4694) - CASE IH TRACTOR (1/85-12/86) |
| (6-238) - REAR AXLE AND SPINDLE, LEFT TRUNNION AND SPINDLE, TRUNNION WITH BEARING, AXLE S/N 13015953 AND AFTER | (4694) - CASE IH TRACTOR (1/85-12/86) |
| (6-194) - FRONT AXLE ASSEMBLY, RH TRUNNION, SPINDLE AND SHAFT | (4890) - CASE TRACTOR (1/79-12/83) |
| (6-208) - REAR AXLE ASSEMBLY, LH TRUNNION, SPINDLE AND SHAFT | (4890) - CASE TRACTOR (1/79-12/83) |
| (6-210) - REAR AXLE ASSEMBLY, RH TRUNNION, SPINDLE AND SHAFT | (4890) - CASE TRACTOR (1/79-12/83) |
| (6-190) - FRONT AXLE ASSEMBLY PRIOR TO P.I.N. 8865170, RH TRUNNION, SPINDLE AND SHAFT | (4894) - CASE IH TRACTOR (1/85-12/87) |
| (6-192) - FRONT AXLE ASSEMBLY P.I.N. 8865170 AND AFTER, RH TRUNNION, SPINDLE AND SHAFT | (4894) - CASE IH TRACTOR (1/85-12/87) |
| (6-216) - REAR AXLE ASSEMBLY PRIOR TO P.I.N. 8865170, RIGHT TRUNNION, SPINDLE AND SHAFT | (4894) - CASE IH TRACTOR (1/85-12/87) |
| (6-218) - REAR AXLE ASSEMBLY P.I.N. 8865170 AND AFTER, RIGHT TRUNNION SPINDLE AND SHAFT | (4894) - CASE IH TRACTOR (1/85-12/87) |
| (6-220) - REAR AXLE ASSEMBLY PRIOR TO P.I.N. 8865170, LEFT TRUNNION, SPINDLE AND SHAFT | (4894) - CASE IH TRACTOR (1/85-12/87) |
| (6-222) - REAR AXLE ASSEMBLY P.I.N. 8865170 AND AFTER, LEFT TRUNNION, SPINDLE AND SHAFT | (4894) - CASE IH TRACTOR (1/85-12/87) |
| (5-134) - FRONT STEERING HYDRAULICS | (4994) - CASE TRACTOR (1/85-12/88) |
