| Узел | Модель |
|---|
| (16) - BASIC BACKHOE HYDRAULICS, W-7 | (32) - BACKHOE FOR W7, W9A, W9B, W10 (1/62-12/67) |
| (22) - BASIC BACKHOE HYDRAULICS, W9B | (32) - BACKHOE FOR W7, W9A, W9B, W10 (1/62-12/67) |
| (060) - BASIC BACKHOE HYDRAULICS, USED ON W7 SERIES LOADER ONLY | (33) - BACKHOE FOR W SERIES RIGID LOADERS (1/66-12/71) |
| (064) - BASIC BACKHOE HYDRAULICS, USED ON W9 AND W10 SERIES LOADERS ONLY | (33) - BACKHOE FOR W SERIES RIGID LOADERS (1/66-12/71) |
| (068) - BASIC BACKHOE HYDRAULICS, USED ON W9 AND W10 SERIES LOADERS ONLY | (33) - BACKHOE FOR W SERIES RIGID LOADERS (1/66-12/71) |
| (060) - BASIC BACKHOE HYDRAULICS, USED ON W7 SERIES LOADER ONLY | (34) - BACKHOE FOR W SERIES RIGID LOADERS (1/61-12/71) |
| (064) - BASIC BACKHOE HYDRAULICS, USED ON W9 AND W10 SERIES LOADERS ONLY | (34) - BACKHOE FOR W SERIES RIGID LOADERS (1/61-12/71) |
| (068) - BASIC BACKHOE HYDRAULICS, USED ON W9 AND W10 SERIES LOADERS ONLY | (34) - BACKHOE FOR W SERIES RIGID LOADERS (1/61-12/71) |
| (10) - D-70, SD-70 KINGPOST INSTALLATION | (D-70) - BACKHOE (1/77-12/88) |
| (7-104) - MAIN FRAME, STABILIZER AND KING POST | (D100) - CASE BACKHOE (1/89-12/89) |
| (7-104) - MAIN FRAME, STABILIZER AND KING POST | (D100XR) - CASE BACKHOE (1/87-12/94) |
| (7-104) - MAIN FRAME, STABILIZER AND KING POST | (D130) - CASE BACKHOE (1/89-12/01) |
| (10) - D-70, SD-70 KINGPOST INSTALLATION | (SD-70) - BACKHOE (1/80-12/88) |
| (018) - SWING DOWN BACKHOE SEAT | (26) - BACKHOE (1/65-12/75) |
| (018) - SWING DOWN BACKHOE SEAT | (26B) - BACKHOE (1/65-12/75) |
| (9-16) - MOUNTING FRAME | (26D) - BACKHOE (1/80-12/89) |
| (018) - SWING DOWN BACKHOE SEAT | (26S) - BACKHOE (1/65-12/75) |
| (095A) - SEAT BELTS | (380CK) - CASE G.P. & L.C.G. WHEEL TRACTOR (1/70-12/74) |
| (098) - SHELL FENDERS AND FLOOR PLATES | (380CK) - CASE G.P. & L.C.G. WHEEL TRACTOR (1/70-12/74) |
| (115A) - TWO-POST ROPS | (380CK) - CASE G.P. & L.C.G. WHEEL TRACTOR (1/70-12/74) |
| (085C) - FENDER MOUNTED FLOOD AND TAIL LAMP | (480B) - CASE CONSTRUCTION KING WHEEL TRACTOR (7/71-12/78) |
| (129A) - SENSING LINKAGE CONTROLS | (480CK) - CASE CONSTRUCTION KING WHEEL TRACTOR (1/66-12/71) |
| (168) - HYDRAULIC GRAPPLE | (1529) - CASE UNI-LOADER SKID STEER LOADER W/DEUTZ ENGINE (1/69-12/88) |
| (14) - TRANSPORT CLUTCH | (120) - CASE TRIMLINE TRENCHER (1/76-12/81) |
| (16) - WATER PUMP MOUNTING | (CASE) - HYDRA-BORER (11/88-12/91) |
| (12) - BELTS, CLUTCHES, SHEAVES | (70) - DAVIS TRIMLINE TRENCHER (1/77-12/80) |
| (44) - HYDRA - BORER ATTACHMENT | (700) - DAVIS TASK FORCE TRENCHER (1/70-12/82) |
| (22) - AXLE DRIVE LINE | (DAVIS) - FLEETLINE 16+4 TRENCHER (1/76-12/82) |
| (28) - VALVE AND PUMP CONTROLS | (DAVIS) - FLEETLINE 16+4 TRENCHER (1/76-12/82) |
| (34) - CRUMBER ATTACHMENT | (DAVIS) - FLEETLINE 16+4 TRENCHER (1/76-12/82) |
| (36) - HYDRAULIC ANGLE BACKFILL BLADE | (DAVIS) - FLEETLINE 16+4 TRENCHER (1/76-12/82) |
| (04) - MAIN FRAME, SEAT, HOOD | (DAVIS) - FLEETLINE 25+4 TRENCHER (1/76-12/78) |
| (16) - VALVE AND PUMP CONTROLS | (DAVIS) - FLEETLINE 25+4 TRENCHER (1/76-12/78) |
| (22) - FRICTION CLUTCH | (DAVIS) - FLEETLINE 25+4 TRENCHER (1/76-12/78) |
| (32) - WHEELS AND TIRES | (TL200) - CASE TRENCHER (1/81-12/83) |
| (34) - MAIN FRAME, CONSOLE, AND STEERING HANDLE | (TL200) - CASE TRENCHER (1/81-12/83) |
| (394) - SUSPENSION SEAT ASSEMBLY | (1150C) - CASE CRAWLER TRACTOR (NORTH AMERICA) (7/78-12/84) |
| (062) - THROTTLE CONTROL LINKAGE | (1150D) - CASE CRAWLER TRACTOR (1/76-12/86) |
| (196) - TRANSMISSION CONTROL VALVE, COVER AND BASE, HIGH-LOW & FOR.-REV. SPOOL, PRESSURE REGULATOR SPOOL | (1150D) - CASE CRAWLER TRACTOR (1/76-12/86) |
| (198) - TRANSMISSION CONTROL VALVE, BRAKE SPOOL, RETARD VALVE | (1150D) - CASE CRAWLER TRACTOR (1/76-12/86) |
| (244) - POWER BRAKES - PEDALS AND RODS, LOADER MODELS ONLY | (1150D) - CASE CRAWLER TRACTOR (1/76-12/86) |
| (246) - POWER BRAKES - PEDALS AND RODS, DOZER AND DRAWBAR MODELS | (1150D) - CASE CRAWLER TRACTOR (1/76-12/86) |
| (258) - EQUIPMENT HYDRAULIC CIRCUIT, PUMP TO CONTROL VALVE AND RESERVOIR | (1150D) - CASE CRAWLER TRACTOR (1/76-12/86) |
| (276) - TILT HYDRAULIC CIRCUIT - TILT DOZER MODELS, GRILLE TO CYLINDER | (1150D) - CASE CRAWLER TRACTOR (1/76-12/86) |
| (282) - DOZER TILT AND PITCH HYDRAULIC CIRCUIT, ANGLE TILT PITCH DOZER MODELS GRILLE TO CYLINDER | (1150D) - CASE CRAWLER TRACTOR (1/76-12/86) |
| (290) - DOZER ANGLE HYDRAULIC CIRCUIT, ANGLE TILT PITCH DOZER MODELS GRILLE TO CYLINDERS | (1150D) - CASE CRAWLER TRACTOR (1/76-12/86) |
| (362) - LOADER CLAM BUCKET | (1150D) - CASE CRAWLER TRACTOR (1/76-12/86) |
| (384) - MAIN FRAME, PIVOT SHAFT, AND PULL HOOK, DOZER AND DRAWBAR MODELS | (1150D) - CASE CRAWLER TRACTOR (1/76-12/86) |
| (386) - MAIN FRAME AND PULL HOOK, LOADER MODELS | (1150D) - CASE CRAWLER TRACTOR (1/76-12/86) |
| (392) - DRIVE SHAFT AND REAR TRANSMISSION GUARDS, ONE-PIECE REAR TRANS GUARD-RIPPER MODELS IF USED | (1150D) - CASE CRAWLER TRACTOR (1/76-12/86) |
| (396) - REAR COVER, SEAT MOUNTING, AND TOOL BOX | (1150D) - CASE CRAWLER TRACTOR (1/76-12/86) |
| (412) - SUSPENSION SEAT AND SEAT BELT | (1150D) - CASE CRAWLER TRACTOR (1/76-12/86) |
| (414) - SUSPENSION SEAT ASSEMBLY | (1150D) - CASE CRAWLER TRACTOR (1/76-12/86) |
| (426) - CAB FRAME MOUNTING AND REAR SCREEN | (1150D) - CASE CRAWLER TRACTOR (1/76-12/86) |
| (140) - IDLER AND RECOIL SYSTEM MOUNTING | (1150D) - CASE CRAWLER TRACTOR (1/76-12/86) |
| (3-02) - THROTTLE CONTROL LINKAGE | (1150E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (6-28) - TRANSMISSION CONTROL VALVE, COVER AND BASE, HIGH-LOW AND FOR.-REV. SPOOLS, PRESSURE REGULATOR SPOOLS | (1150E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (6-30) - TRANSMISSION CONTROL VALVE, BRAKE SPOOL | (1150E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (7-06) - POWER BRAKES - PEDALS AND RODS, LOADER MODELS ONLY | (1150E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (7-08) - POWER BRAKES - PEDALS AND RODS, DOZER AND DRAWBAR MODELS ONLY | (1150E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (8-042) - DOZER TILT AND PITCH HYDRAULIC CIRCUIT, ANGLE TILT PITCH DOZER MODELS TUBES TO GRILLE | (1150E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (8-050) - DOZER ANGLE HYDRAULIC CIRCUIT, ANGLE TILT PITCH DOZER MODELS GRILLE TO CYLINDERS | (1150E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (9-010) - LOADER CLAM BUCKET | (1150E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (9-072) - R49353 BOSTROM SUSPENSION SEAT ASSEMBLY | (1150E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (9-114) - AIR CONDITIONING SYSTEM, COMPRESSOR AND CONNECTIONS - LOADER MODELS PRIOR TO PIN JAK0009982 | (1150E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (9-118) - AIR CONDITIONING SYSTEM, COMPRESSOR AND CONNECTIONS - DOZER MODELS W 6-830 ENG PRIOR PIN JAK0009016 | (1150E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (062) - THROTTLE CONTROL LINKAGE | (1155D) - CASE CRAWLER TRACTOR (7/83-12/86) |
| (196) - TRANSMISSION CONTROL VALVE, COVER AND BASE, HIGH-LOW & FOR.-REV. SPOOL, PRESSURE REGULATOR SPOOL | (1155D) - CASE CRAWLER TRACTOR (7/83-12/86) |
| (198) - TRANSMISSION CONTROL VALVE, BRAKE SPOOL, RETARD VALVE | (1155D) - CASE CRAWLER TRACTOR (7/83-12/86) |
| (244) - POWER BRAKES - PEDALS AND RODS, LOADER MODELS ONLY | (1155D) - CASE CRAWLER TRACTOR (7/83-12/86) |
| (246) - POWER BRAKES - PEDALS AND RODS, DOZER AND DRAWBAR MODELS | (1155D) - CASE CRAWLER TRACTOR (7/83-12/86) |
| (258) - EQUIPMENT HYDRAULIC CIRCUIT, PUMP TO CONTROL VALVE AND RESERVOIR | (1155D) - CASE CRAWLER TRACTOR (7/83-12/86) |
| (276) - TILT HYDRAULIC CIRCUIT - TILT DOZER MODELS, GRILLE TO CYLINDER | (1155D) - CASE CRAWLER TRACTOR (7/83-12/86) |
| (282) - DOZER TILT AND PITCH HYDRAULIC CIRCUIT, ANGLE TILT PITCH DOZER MODELS GRILLE TO CYLINDER | (1155D) - CASE CRAWLER TRACTOR (7/83-12/86) |
| (290) - DOZER ANGLE HYDRAULIC CIRCUIT, ANGLE TILT PITCH DOZER MODELS GRILLE TO CYLINDERS | (1155D) - CASE CRAWLER TRACTOR (7/83-12/86) |
| (362) - LOADER CLAM BUCKET | (1155D) - CASE CRAWLER TRACTOR (7/83-12/86) |
| (384) - MAIN FRAME, PIVOT SHAFT, AND PULL HOOK, DOZER AND DRAWBAR MODELS | (1155D) - CASE CRAWLER TRACTOR (7/83-12/86) |
| (386) - MAIN FRAME AND PULL HOOK, LOADER MODELS | (1155D) - CASE CRAWLER TRACTOR (7/83-12/86) |
| (392) - DRIVE SHAFT AND REAR TRANSMISSION GUARDS, ONE-PIECE REAR TRANS GUARD-RIPPER MODELS IF USED | (1155D) - CASE CRAWLER TRACTOR (7/83-12/86) |
| (396) - REAR COVER, SEAT MOUNTING, AND TOOL BOX | (1155D) - CASE CRAWLER TRACTOR (7/83-12/86) |
| (412) - SUSPENSION SEAT AND SEAT BELT | (1155D) - CASE CRAWLER TRACTOR (7/83-12/86) |
| (414) - SUSPENSION SEAT ASSEMBLY | (1155D) - CASE CRAWLER TRACTOR (7/83-12/86) |
| (426) - CAB FRAME MOUNTING AND REAR SCREEN | (1155D) - CASE CRAWLER TRACTOR (7/83-12/86) |
| (140) - IDLER AND RECOIL SYSTEM MOUNTING | (1155D) - CASE CRAWLER TRACTOR (7/83-12/86) |
| (3-02) - THROTTLE CONTROL LINKAGE | (1155E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (6-28) - TRANSMISSION CONTROL VALVE, COVER AND BASE, HIGH-LOW AND FOR.-REV. SPOOLS, PRESSURE REGULATOR SPOOLS | (1155E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (6-30) - TRANSMISSION CONTROL VALVE, BRAKE SPOOL | (1155E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (7-06) - POWER BRAKES - PEDALS AND RODS, LOADER MODELS ONLY | (1155E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (7-08) - POWER BRAKES - PEDALS AND RODS, DOZER AND DRAWBAR MODELS ONLY | (1155E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (8-042) - DOZER TILT AND PITCH HYDRAULIC CIRCUIT, ANGLE TILT PITCH DOZER MODELS TUBES TO GRILLE | (1155E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (8-050) - DOZER ANGLE HYDRAULIC CIRCUIT, ANGLE TILT PITCH DOZER MODELS GRILLE TO CYLINDERS | (1155E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (9-010) - LOADER CLAM BUCKET | (1155E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (9-072) - R49353 BOSTROM SUSPENSION SEAT ASSEMBLY | (1155E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (9-114) - AIR CONDITIONING SYSTEM, COMPRESSOR AND CONNECTIONS - LOADER MODELS PRIOR TO PIN JAK0009982 | (1155E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (9-118) - AIR CONDITIONING SYSTEM, COMPRESSOR AND CONNECTIONS - DOZER MODELS W 6-830 ENG PRIOR PIN JAK0009016 | (1155E) - CASE CRAWLER TRACTOR (7/85-12/94) |
| (6-244) - TRANSMISSION CONTROL VALVE, COVER AND BASE | (1450B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (6-246) - TRANSMISSION CONTROL VALVE, BRAKE SPOOL | (1450B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (7-296) - POWER BRAKES - PEDALS AND LINKAGE | (1450B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (7-298) - PARKING BRAKES - MANUAL | (1450B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (8-350) - DOZER TILT AND PITCH HYDRAULIC CIRCUIT, ANGLE TILT PITCH DZER MODELS, GRILLE TO CYL. | (1450B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (8-356) - DOZER ANGLE HYDRAULIC CIRCUIT, ANGLE TILT PITCH DOZER MODELS GRILLE TO CYL. | (1450B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (9-450) - LOADER CLAM BUCKET | (1450B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (9-484) - REAR TRANSMISSION GUARDS - MODELS WITH A RIPPER, USED ON MODELS W/FRONT OR REAR FILL TRANS, IF USED | (1450B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (9-492) - HEAVY DUTY (HINGED) GRILLE AND RADIATOR BRUSH SCREEN | (1450B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (9-502) - BTTRY COMPARTMENT COVERS, SEAT SUPPORT, & HEEL PLATE MODEL W/TOP OR REAR FILL TANKS, ALL MODELS | (1450B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (9-510) - SUSPENSION SEAT ASSEMBLY | (1450B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (9-526) - CAB, REAR SCREEN AND FUEL ACCESS, MODELS WITH TOP FILL FUEL & HYD. TANKS, IF USED | (1450B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (9-528) - CAB HINGED WINDOW & REAR SCREEN, HINGED WINDOW, IF USED | (1450B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (6-244) - TRANSMISSION CONTROL VALVE, COVER AND BASE | (1455B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (6-246) - TRANSMISSION CONTROL VALVE, BRAKE SPOOL | (1455B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (7-296) - POWER BRAKES - PEDALS AND LINKAGE | (1455B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (7-298) - PARKING BRAKES - MANUAL | (1455B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (8-350) - DOZER TILT AND PITCH HYDRAULIC CIRCUIT, ANGLE TILT PITCH DZER MODELS, GRILLE TO CYL. | (1455B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (8-356) - DOZER ANGLE HYDRAULIC CIRCUIT, ANGLE TILT PITCH DOZER MODELS GRILLE TO CYL. | (1455B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (9-450) - LOADER CLAM BUCKET | (1455B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (9-484) - REAR TRANSMISSION GUARDS - MODELS WITH A RIPPER, USED ON MODELS W/FRONT OR REAR FILL TRANS, IF USED | (1455B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (9-492) - HEAVY DUTY (HINGED) GRILLE AND RADIATOR BRUSH SCREEN | (1455B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (9-502) - BTTRY COMPARTMENT COVERS, SEAT SUPPORT, & HEEL PLATE MODEL W/TOP OR REAR FILL TANKS, ALL MODELS | (1455B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (9-510) - SUSPENSION SEAT ASSEMBLY | (1455B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (9-526) - CAB, REAR SCREEN AND FUEL ACCESS, MODELS WITH TOP FILL FUEL & HYD. TANKS, IF USED | (1455B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (9-528) - CAB HINGED WINDOW & REAR SCREEN, HINGED WINDOW, IF USED | (1455B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (372) - SUSPENSION SEAT ASSEMBLY, USED WITHOUT BACKHOE | (850B) - CASE CRAWLER TRACTOR (1/76-12/84) |
| (324) - SUSPENSION SEAT ASSEMBLY, USED ON MODELS WITHOUT BACKHOE | (850C) - CASE CRAWLER TRACTOR (1/81-12/84) |
| (3-02) - THROTTLE CONTROL LINKAGE | (850D) - CASE LONG TRACK CRAWLER TRACTOR (1/85-12/94) |
| (8-032) - DOZER ANGLE HYDRAULIC CIRCUIT, GRILLE TO CYLINDERS | (850D) - CASE LONG TRACK CRAWLER TRACTOR (1/85-12/94) |
| (9-030) - REAR TRANSMISSION GUARDS | (850D) - CASE LONG TRACK CRAWLER TRACTOR (1/85-12/94) |
| (9-038) - RADIATOR GUARDS, GRILLE, AND SCREENS | (850D) - CASE LONG TRACK CRAWLER TRACTOR (1/85-12/94) |
| (9-052) - SUSPENSION SEAT ASSEMBLY, USED ON MODELS WITHOUT A BACKHOE | (850D) - CASE LONG TRACK CRAWLER TRACTOR (1/85-12/94) |
| (324) - SUSPENSION SEAT ASSEMBLY, USED ON MODELS WITHOUT BACKHOE | (855C) - CASE CRAWLER TRACTOR (1/84-12/84) |
| (3-02) - THROTTLE CONTROL LINKAGE | (855D) - CASE LONG TRACK CRAWLER TRACTOR (1/85-12/94) |
| (8-032) - DOZER ANGLE HYDRAULIC CIRCUIT, GRILLE TO CYLINDERS | (855D) - CASE LONG TRACK CRAWLER TRACTOR (1/85-12/94) |
| (9-030) - REAR TRANSMISSION GUARDS | (855D) - CASE LONG TRACK CRAWLER TRACTOR (1/85-12/94) |
| (9-038) - RADIATOR GUARDS, GRILLE, AND SCREENS | (855D) - CASE LONG TRACK CRAWLER TRACTOR (1/85-12/94) |
| (9-052) - SUSPENSION SEAT ASSEMBLY, USED ON MODELS WITHOUT A BACKHOE | (855D) - CASE LONG TRACK CRAWLER TRACTOR (1/85-12/94) |
| (9-34) - SUSPENSION SEAT ASSEMBLY | (650) - CASE CRAWLER TRACTOR (1/90-12/91) |
| (9-18) - BATTERY COMPARTMENT AND REAR COVER, MODELS WITHOUT A BACKHOE | (550) - CASE LONG TRACK CRAWLER TRACTOR (1/89-12/91) |
| (9-34) - SUSPENSION SEAT ASSEMBLY | (550) - CASE LONG TRACK CRAWLER TRACTOR (1/89-12/91) |
| (166) - PULL HOOK, CRANKCASE, TORQUE CONVERTER, AND SEDIMENT BOWL GUARD | (450) - CASE CRAWLER TRACTOR (S/N 3038436 TO 3060306) (7/68-12/80) |
| (180) - ROLL OVER PROTECTION STRUCTURE | (450) - CASE CRAWLER TRACTOR (S/N 3038436 TO 3060306) (7/68-12/80) |
| (294) - ROLL OVER PROTECTION STRUCTURE | (450) - CASE CRAWLER TRACTOR (S/N 3060306 & AFTER) (7/75-12/80) |
| (126) - TRACK FRAME AND RECOIL SYSTEM | (450B) - CASE CRAWLER TRACTOR (1/78-12/83) |
| (250) - SHROUD, GRILLE AND SCREENS | (450B) - CASE CRAWLER TRACTOR (1/78-12/83) |
| (254) - FLOOR PLATES | (450B) - CASE CRAWLER TRACTOR (1/78-12/83) |
| (256) - FUEL TANK, HYDRAULIC RESERVOIR, AND SEAT FRAME | (450B) - CASE CRAWLER TRACTOR (1/78-12/83) |
| (258) - SEAT AND SEAT BELT | (450B) - CASE CRAWLER TRACTOR (1/78-12/83) |
| (262) - ROLL OVER PROTECTIVE STRUCTURE AND REAR SCREEN | (450B) - CASE CRAWLER TRACTOR (1/78-12/83) |
| (264) - BRUSH SWEEPS, SIDE SCREENS AND CANOPY EXTENSION | (450B) - CASE CRAWLER TRACTOR (1/78-12/83) |
| (260) - BACKHOE SEAT | (450B) - CASE CRAWLER TRACTOR (1/78-12/83) |
| (3-02) - THROTTLE CONTROL LINKAGE | (450C) - CASE LONG TRACK CRAWLER TRACTOR (1/83-12/94) |
| (4-22) - DUAL BATTERIES AND MOUNTING, BHC30 BATTERIES AND MOUNTING, IF USED | (450C) - CASE LONG TRACK CRAWLER TRACTOR (1/83-12/94) |
| (8-24) - DOZER LIFT HYDRAULIC CIRCUIT | (450C) - CASE LONG TRACK CRAWLER TRACTOR (1/83-12/94) |
| (9-32) - BATTERY COMPARTMENT AND REAR COVER, MODELS WITHOUT A BACKHOE | (450C) - CASE LONG TRACK CRAWLER TRACTOR (1/83-12/94) |
| (9-36) - BATTERY COMPARTMENT AND REAR COVER, MODELS WITH A BACKHOE | (450C) - CASE LONG TRACK CRAWLER TRACTOR (1/83-12/94) |
| (9-52) - SUSPENSION SEAT ASSEMBLY | (450C) - CASE LONG TRACK CRAWLER TRACTOR (1/83-12/94) |
| (9-58) - ROLL OVER PROTECTIVE STRUCTURE, CANOPY | (450C) - CASE LONG TRACK CRAWLER TRACTOR (1/83-12/94) |
| (126) - TRACK FRAME AND RECOIL SYSTEM | (455B) - CASE CRAWLER TRACTOR (1/83-12/83) |
| (250) - SHROUD, GRILLE AND SCREENS | (455B) - CASE CRAWLER TRACTOR (1/83-12/83) |
| (254) - FLOOR PLATES | (455B) - CASE CRAWLER TRACTOR (1/83-12/83) |
| (256) - FUEL TANK, HYDRAULIC RESERVOIR, AND SEAT FRAME | (455B) - CASE CRAWLER TRACTOR (1/83-12/83) |
| (258) - SEAT AND SEAT BELT | (455B) - CASE CRAWLER TRACTOR (1/83-12/83) |
| (262) - ROLL OVER PROTECTIVE STRUCTURE AND REAR SCREEN | (455B) - CASE CRAWLER TRACTOR (1/83-12/83) |
| (264) - BRUSH SWEEPS, SIDE SCREENS AND CANOPY EXTENSION | (455B) - CASE CRAWLER TRACTOR (1/83-12/83) |
| (260) - BACKHOE SEAT | (455B) - CASE CRAWLER TRACTOR (1/83-12/83) |
| (3-02) - THROTTLE CONTROL LINKAGE | (455C) - CASE LONG TRACK CRAWLER TRACTOR (1/83-12/90) |
| (4-22) - DUAL BATTERIES AND MOUNTING, BHC30 BATTERIES AND MOUNTING, IF USED | (455C) - CASE LONG TRACK CRAWLER TRACTOR (1/83-12/90) |
| (8-24) - DOZER LIFT HYDRAULIC CIRCUIT | (455C) - CASE LONG TRACK CRAWLER TRACTOR (1/83-12/90) |
| (9-32) - BATTERY COMPARTMENT AND REAR COVER, MODELS WITHOUT A BACKHOE | (455C) - CASE LONG TRACK CRAWLER TRACTOR (1/83-12/90) |
| (9-36) - BATTERY COMPARTMENT AND REAR COVER, MODELS WITH A BACKHOE | (455C) - CASE LONG TRACK CRAWLER TRACTOR (1/83-12/90) |
| (9-52) - SUSPENSION SEAT ASSEMBLY | (455C) - CASE LONG TRACK CRAWLER TRACTOR (1/83-12/90) |
| (9-58) - ROLL OVER PROTECTIVE STRUCTURE, CANOPY | (455C) - CASE LONG TRACK CRAWLER TRACTOR (1/83-12/90) |
| (422) - ROLL OVER PROTECTION STRUCTURE | (350) - CASE CRAWLER TRACTOR (1/70-12/80) |
| (298) - ROLLOVER PROTECTIVE STRUCTURE CANOPY | (350B) - CASE CRAWLER TRACTOR (1/79-12/83) |
| (062) - FUEL TANK AND LINES, HIGH CAPACITY FUEL TANKS | (1280B) - CASE CRAWLER EXCAVATOR (1/83-12/86) |
| (318) - LUBRICATION SYSTEM, BOOM AND ARM | (1187) - CASE LOGGER CRAWLER EXCAVATOR (1/83-12/85) |
| (340) - LOGGER CAB, CAB AND WINDOW GUARDS | (1187) - CASE LOGGER CRAWLER EXCAVATOR (1/83-12/85) |
| (342) - LOGGER CAB, DOOR, DOOR SEAL AND WINDOW GUARD | (1187) - CASE LOGGER CRAWLER EXCAVATOR (1/83-12/85) |
| (2-34) - OIL FILTER AND HEAT EXCHANGER, 504BDT ENGINE | (1187B) - CASE LOGGER CRAWLER EXCAVATOR (1/85-12/88) |
| (9-334) - HAND LEVER CONTROLS | (1187B) - CASE LOGGER CRAWLER EXCAVATOR (1/85-12/88) |
| (9-378) - LUBRICATION SYSTEM, BOOM AND ARM | (1187B) - CASE LOGGER CRAWLER EXCAVATOR (1/85-12/88) |
| (9-384) - COLLECTOR FRAME AND ARMS | (1187B) - CASE LOGGER CRAWLER EXCAVATOR (1/85-12/88) |
| (9-394) - TOOL GRINDER STAND | (1187B) - CASE LOGGER CRAWLER EXCAVATOR (1/85-12/88) |
| (9-398) - LOGGER CAB, CAB AND WINDOW GUARDS | (1187B) - CASE LOGGER CRAWLER EXCAVATOR (1/85-12/88) |
| (9-400) - LOGGER CAB | (1187B) - CASE LOGGER CRAWLER EXCAVATOR (1/85-12/88) |
| (2-36) - OIL FILTER AND HEAT EXCHANGER, 504BDT ENGINE | (1080B) - CASE CRAWLER EXCAVATOR (1/86-12/88) |
| (408) - CAB DOOR ASSEMBLY, PIN 62052365 TO 6205413 | (880C) - CASE CRAWLER EXCAVATOR (7/80-12/84) |
| (374) - E BOOM LUBRICATION LINES | (880C) - CASE CRAWLER EXCAVATOR (7/80-12/84) |
| (258) - BOOM LUBRICATION LINES | (880D) - CASE CRAWLER EXCAVATOR (7/84-12/87) |
| (9-052) - SUSPENSION SEATS | (621) - CASE WHEEL LOADER (PRIOR TO S/N JAK0021701) (NORTH AMERICA) (1/92-12/93) |
| (9-36) - SUSPENSION SEATS | (621) - CASE WHEEL LOADER (S/N JAK0021701 & AFTER) (NORTH AMERICA) (1/92-12/93) |
| (9-046) - SUSPENSION SEATS | (721) - CASE WHEEL LOADER (NORTH AMERICA) (1/89-12/92) |
| (9-052) - SUSPENSION SEATS | (821) - CASE WHEEL LOADER (NORTH AMERICA) (1/90-12/92) |
| (9-046) - SUSPENSION SEATS, BLACK | (621B) - CASE WHEEL LOADER (NORTH AMERICA) (3/93-12/98) |
| (9-050) - SUSPENSION SEATS - BROWN | (721B) - CASE WHEEL LOADER (NORTH AMERICA) (3/93-12/98) |
| (9-048) - SUSPENSION SEATS - BROWN | (821B) - CASE WHEEL LOADER (NORTH AMERICA) (6/96-12/97) |
| (246) - L73447 OPTIONAL SUSPENSION SEAT, USED AFTER TRACTOR SERIAL NUMBER 9116639 | (600) - CASE SKID KING WHEEL LOADER (1/72-12/76) |
| (246) - L73447 OPTIONAL SUSPENSION SEAT, USED AFTER TRACTOR SERIAL NUMBER 9116639 | (800) - CASE SKID KING WHEEL LOADER (1/72-12/76) |
| (246) - L73447 OPTIONAL SUSPENSION SEAT, USED AFTER TRACTOR SERIAL NUMBER 9116639 | (825) - CASE SKID KING WHEEL LOADER (1/72-12/76) |
| (252) - L79455 SUSPENSION SEAT, INCLUDES PARTS ON PAGES 253-257 | (W11) - CASE UNIT LOADER (1/83-12/83) |
| (7-020) - L114928 BRAKE RESERVOIR | (W11B) - CASE UNIT LOADER (1/84-12/93) |
| (9-028) - L112224 SUSPENSION SEAT | (W11B) - CASE UNIT LOADER (1/84-12/93) |
| (450) - L114928 BRAKE RESERVOIR | (W14) - CASE UNIT LOADER W/POD CAB (S/N 9119672 & AFTER) (NORTH AMERICA) (1/75-12/86) |
| (590) - SUSPENSION SEAT | (W14) - CASE UNIT LOADER W/POD CAB (S/N 9119672 & AFTER) (NORTH AMERICA) (1/75-12/86) |
| (7-54) - BRAKE RESERVOIR - L114928 | (W14B) - CASE WHEEL LOADER (1/85-12/89) |
| (9-44) - SUSPENSION SEATS | (W14B) - CASE WHEEL LOADER (1/85-12/89) |
| (9-82) - CANOPY | (W14B) - CASE WHEEL LOADER (1/85-12/89) |
| (9-40) - SUSPENSION SEAT ASSEMBLIES | (W14C) - CASE WHEEL LOADER (1/90-12/93) |
| (9-78) - CANOPY | (W14C) - CASE WHEEL LOADER (1/90-12/93) |
| (390) - SUSPENSION SEAT | (W18) - CASE WHEEL LOADER (S/N 9123140 & AFTER) (NORTH AMERICA) (1/76-12/83) |
| (2-06) - OIL FILTER AND COOLER, 504BD ENGINE | (W18B) - CASE WHEEL LOADER (1/85-12/88) |
| (2-08) - OIL FILTER AND HEAT EXCHANGER, 504BDT ENGINE | (W18B) - CASE WHEEL LOADER (1/85-12/88) |
| (9-044) - SUSPENSION SEAT | (W18B) - CASE WHEEL LOADER (1/85-12/88) |
| (043A) - ALTERNATOR MOUNTING PARTS, L51531 ALTERNATOR (70 AMP) / L59724 ALTERNATOR (70 AMP) | (W20) - CASE WHEEL LOADER (PRIOR TO S/N 9123140) (1/71-12/83) |
| (390) - SUSPENSION SEAT | (W20) - CASE WHEEL LOADER (S/N 9123140 & AFTER) (NORTH AMERICA) (1/76-12/83) |
| (390) - SUSPENSION SEAT | (W20B) - CASE WHEEL LOADER (S/N 9123140 & AFTER) (NORTH AMERICA) (1/81-12/93) |
| (2-06) - OIL FILTER AND COOLER, 504BD ENGINE | (W20C) - CASE WHEEL LOADER (NORTH AMERICA) (1/82-12/89) |
| (2-08) - OIL FILTER AND HEAT EXCHANGER, 504BDT ENGINE | (W20C) - CASE WHEEL LOADER (NORTH AMERICA) (1/82-12/89) |
| (7-88) - L114928 BRAKE RESERVOIR | (W20C) - CASE WHEEL LOADER (NORTH AMERICA) (1/82-12/89) |
| (9-044) - SUSPENSION SEAT | (W20C) - CASE WHEEL LOADER (NORTH AMERICA) (1/82-12/89) |
| (272) - SUSPENSION SEAT | (W24B) - CASE ARTICULATED WHEEL LOADER W/POD CAB (S/N 9120696 & AFTER) (1/75-12/78) |
| (434) - SUSPENSION SEAT | (W24C) - CASE WHEEL LOADER (1/77-12/85) |
| (7-46) - BRAKE RESERVOIR - L114928 | (W30) - CASE WHEEL LOADER (1/82-12/89) |
| (9-42) - SUSPENSION SEATS | (W30) - CASE WHEEL LOADER (1/82-12/89) |
| (2-16) - OIL FILTER AND HEAT EXCHANGER, 504BDTI ENGINE | (W36) - CASE WHEEL LOADER (PRIOR TO S/N 17754000) (1/77-12/89) |
| (9-502) - SUSPENSION SEAT | (W36) - CASE WHEEL LOADER (PRIOR TO S/N 17754000) (1/77-12/89) |
| (9-330) - GRILLE AND RADIATOR GUARD | (W36) - CASE WHEEL LOADER (S/N 17754000 & AFTER) (1/79-12/83) |
| (9-340) - SUSPENSION SEAT | (W36) - CASE WHEEL LOADER (S/N 17754000 & AFTER) (1/79-12/83) |
| (094) - TRANSMISSION RANGE SELECTOR CONTROLS, 1.8 LITRE ENGINE | (W4) - CASE WHEEL LOADER (1/78-12/83) |
| (098) - TRANSMISSION AND REAR AXLE MOUNTING | (W4) - CASE WHEEL LOADER (1/78-12/83) |
| (114) - BRAKE PEDAL SYSTEM | (W4) - CASE WHEEL LOADER (1/78-12/83) |
| (118) - H638718 BRAKE ACTUATOR ASSEMBLY | (W4) - CASE WHEEL LOADER (1/78-12/83) |
| (192) - HOOD, GRILLE, & RADIATOR SHROUD, FOR 1.8 LITRE ENGINE, USED BEFORE TRACTOR SN 1205402 EXCEPT 1205397 | (W4) - CASE WHEEL LOADER (1/78-12/83) |
| (194) - HOOD, GRILLE, AND RADIATOR SHROUD, FOR 2.1 LITRE SHROUD, USED ON TRACTOR SN 1205397, 1205402 & AFTER | (W4) - CASE WHEEL LOADER (1/78-12/83) |
| (182) - HOOD AND ENGINE SIDE PANELS | (W7) - CASE WHEEL LOADER (1/62-12/68) |
| (9-080) - MATERIAL HANDLING CAB, CAB AND WINDOW GUARDS | (1085C) - CASE CRUZ-AIR WHEELED EXCAVATOR (12/84-1/89) |
| (9-082) - MATERIAL HANDLING CAB, DOOR, LATCH AND WINDOW GUARD | (1085C) - CASE CRUZ-AIR WHEELED EXCAVATOR (12/84-1/89) |
| (9-088) - CAB OVERHEAD GUARD, STANDARD CAB WITH MATERIAL HANDLING BOOM | (1085C) - CASE CRUZ-AIR WHEELED EXCAVATOR (12/84-1/89) |
| (82) - FORWARD & REVERSE SPEED CONTROLS - UPPER, HYDROSTATIC TRANSMISSION | (584) - CASE CONSTRUCTION KING FORKLIFT TRACTOR (1/80-12/05) |
| (82) - FORWARD & REVERSE SPEED CONTROLS - UPPER, HYDROSTATIC TRANSMISSION | (585) - CASE CONSTRUCTION KING FORKLIFT TRACTOR (1/80-12/05) |
| (82) - FORWARD & REVERSE SPEED CONTROLS - UPPER, HYDROSTATIC TRANSMISSION | (586) - CASE CONSTRUCTION KING FORKLIFT TRACTOR (1/80-12/85) |
| (046) - THROTTLE CONTROL LINKAGE | (584D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (188) - TRANSAXLE TRANSMISSION HOUSING, TRANSMISSION SERIAL NO. 16270318, 2WD AND 4WD | (584D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (190) - TRANSAXLE TRANSMISSION HOUSING, TWO WHEEL DRIVE, TRANSMISSION SERIAL NO. 16270319 AND AFTER | (584D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (158) - TRANSAXLE AND DIFFERENTIAL LOCK, TWO WHEEL DRIVE MODELS BEFORE TRANSAXLE S/N 16249203 | (584D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (160) - TRANSAXLE AND DIFFERENTIAL LOCK, TWO WHEEL DRIVE MODELS TRANSAXLE S/N 16249203 THRU 16270318 | (584D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (162) - TRANSAXLE AND DIFFERENTIAL LOCK, TWO WHEEL DRIVE MODELS TRANSAXLE S/N 16270319 AND AFTER | (584D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (164) - TRANSAXLE AND DIFFERENTIAL LOCK, FOUR WHEEL DRIVE MODELS | (584D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (168) - REAR DRIVE AXLE CONTROL, FOUR WHEEL DRIVE MODELS BEFORE TRANSAXLE S/N 16270319 | (584D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (170) - REAR DRIVE AXLE CONTROL, FOUR WHEEL DRIVE MODELS TRANSAXLE S/N 16270319 AND AFTER | (584D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (108) - PARKING BRAKE ALARM | (584D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (046) - THROTTLE CONTROL LINKAGE | (585D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (188) - TRANSAXLE TRANSMISSION HOUSING, TRANSMISSION SERIAL NO. 16270318, 2WD AND 4WD | (585D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (190) - TRANSAXLE TRANSMISSION HOUSING, TWO WHEEL DRIVE, TRANSMISSION SERIAL NO. 16270319 AND AFTER | (585D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (158) - TRANSAXLE AND DIFFERENTIAL LOCK, TWO WHEEL DRIVE MODELS BEFORE TRANSAXLE S/N 16249203 | (585D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (160) - TRANSAXLE AND DIFFERENTIAL LOCK, TWO WHEEL DRIVE MODELS TRANSAXLE S/N 16249203 THRU 16270318 | (585D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (162) - TRANSAXLE AND DIFFERENTIAL LOCK, TWO WHEEL DRIVE MODELS TRANSAXLE S/N 16270319 AND AFTER | (585D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (164) - TRANSAXLE AND DIFFERENTIAL LOCK, FOUR WHEEL DRIVE MODELS | (585D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (168) - REAR DRIVE AXLE CONTROL, FOUR WHEEL DRIVE MODELS BEFORE TRANSAXLE S/N 16270319 | (585D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (170) - REAR DRIVE AXLE CONTROL, FOUR WHEEL DRIVE MODELS TRANSAXLE S/N 16270319 AND AFTER | (585D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (108) - PARKING BRAKE ALARM | (585D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (046) - THROTTLE CONTROL LINKAGE | (586D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (188) - TRANSAXLE TRANSMISSION HOUSING, TRANSMISSION SERIAL NO. 16270318, 2WD AND 4WD | (586D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (190) - TRANSAXLE TRANSMISSION HOUSING, TWO WHEEL DRIVE, TRANSMISSION SERIAL NO. 16270319 AND AFTER | (586D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (158) - TRANSAXLE AND DIFFERENTIAL LOCK, TWO WHEEL DRIVE MODELS BEFORE TRANSAXLE S/N 16249203 | (586D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (160) - TRANSAXLE AND DIFFERENTIAL LOCK, TWO WHEEL DRIVE MODELS TRANSAXLE S/N 16249203 THRU 16270318 | (586D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (162) - TRANSAXLE AND DIFFERENTIAL LOCK, TWO WHEEL DRIVE MODELS TRANSAXLE S/N 16270319 AND AFTER | (586D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (164) - TRANSAXLE AND DIFFERENTIAL LOCK, FOUR WHEEL DRIVE MODELS | (586D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (168) - REAR DRIVE AXLE CONTROL, FOUR WHEEL DRIVE MODELS BEFORE TRANSAXLE S/N 16270319 | (586D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (170) - REAR DRIVE AXLE CONTROL, FOUR WHEEL DRIVE MODELS TRANSAXLE S/N 16270319 AND AFTER | (586D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (108) - PARKING BRAKE ALARM | (586D) - CASE CONSTRUCTION KING FORKLIFT (1/84-12/88) |
| (6-24) - TRANSAXLE AND DIFFERENTIAL LOCK, TWO WHEEL DRIVE MODELS | (584E) - CASE CONSTRUCTION KING FORKLIFT (1/88-12/99) |
| (6-26) - TRANSAXLE AND DIFFERENTIAL LOCK, FOUR WHEEL DRIVE MODELS | (584E) - CASE CONSTRUCTION KING FORKLIFT (1/88-12/99) |
| (6-30) - REAR DRIVE AXLE CONTROL, FOUR WHEEL DRIVE MODELS | (584E) - CASE CONSTRUCTION KING FORKLIFT (1/88-12/99) |
| (6-24) - TRANSAXLE AND DIFFERENTIAL LOCK, TWO WHEEL DRIVE MODELS | (585E) - CASE CONSTRUCTION KING FORKLIFT (1/88-12/88) |
| (6-26) - TRANSAXLE AND DIFFERENTIAL LOCK, FOUR WHEEL DRIVE MODELS | (585E) - CASE CONSTRUCTION KING FORKLIFT (1/88-12/88) |
| (6-30) - REAR DRIVE AXLE CONTROL, FOUR WHEEL DRIVE MODELS | (585E) - CASE CONSTRUCTION KING FORKLIFT (1/88-12/88) |
| (6-24) - TRANSAXLE AND DIFFERENTIAL LOCK, TWO WHEEL DRIVE MODELS | (586E) - CASE CONSTRUCTION KING FORKLIFT (1/88-12/88) |
| (6-26) - TRANSAXLE AND DIFFERENTIAL LOCK, FOUR WHEEL DRIVE MODELS | (586E) - CASE CONSTRUCTION KING FORKLIFT (1/88-12/88) |
| (6-30) - REAR DRIVE AXLE CONTROL, FOUR WHEEL DRIVE MODELS | (586E) - CASE CONSTRUCTION KING FORKLIFT (1/88-12/88) |
| (094) - TRANSMISSION RANGE SELECTOR CONTROLS, 1.8 LITRE ENGINE | (W4) - CASE FORKLIFT (1/78-12/83) |
| (098) - TRANSMISSION AND REAR AXLE MOUNTING | (W4) - CASE FORKLIFT (1/78-12/83) |
| (114) - BRAKE PEDAL SYSTEM | (W4) - CASE FORKLIFT (1/78-12/83) |
| (118) - H638718 BRAKE ACTUATOR ASSEMBLY | (W4) - CASE FORKLIFT (1/78-12/83) |
| (192) - HOOD, GRILLE, & RADIATOR SHROUD, FOR 1.8 LITRE ENGINE, USED BEFORE TRACTOR SN 1205402 EXCEPT 1205397 | (W4) - CASE FORKLIFT (1/78-12/83) |
| (194) - HOOD, GRILLE, AND RADIATOR SHROUD, FOR 2.1 LITRE SHROUD, USED ON TRACTOR SN 1205397, 1205402 & AFTER | (W4) - CASE FORKLIFT (1/78-12/83) |
| (104) - CANOPY ELECTRICAL SYSTEM AND LIGHTS | (580C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/75-12/80) |
| (106) - CAB ELECTRICAL SYSTEM AND LIGHTS | (580C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/75-12/80) |
| (134) - EQUIPMENT HYDRAULIC CIRCUIT, LOADER MODELS WITH SINGLE RIGHT HAND OIL RESERVOIR | (380CK) - CASE LOADER/LANDSCAPER TRACTOR (1/70-12/80) |
| (136) - EQUIPMENT HYDRAULIC CIRCUIT, BACKHOE MODELS WITH SINGLE RIGHT HAND OIL RESERVOIR | (380CK) - CASE LOADER/LANDSCAPER TRACTOR (1/70-12/80) |
| (140) - EQUIPMENT HYDRAULIC CIRCUIT, MODELS WITH DUAL RIGHT HAND AND LEFT HAND OIL RESERVOIRS | (380CK) - CASE LOADER/LANDSCAPER TRACTOR (1/70-12/80) |
| (192) - SEAT BELTS | (380CK) - CASE LOADER/LANDSCAPER TRACTOR (1/70-12/80) |
| (054) - THROTTLE CONTROL LINKAGE AND FUEL SHUT-OFF CABLE | (480C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/76-12/80) |
| (204) - TRANSAXLE AND DIFFERENTIAL LOCK | (480C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/76-12/80) |
| (276) - PTO HYDRAULIC CIRCUIT AND CONTROL | (480C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/76-12/80) |
| (440) - CHASSIS | (480C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/76-12/80) |
| (102) - CANOPY ELECTRICAL SYSTEM AND LAMPS | (480C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/76-12/80) |
| (104) - CAB ELECTRICAL SYSTEM AND LAMPS | (480C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/76-12/80) |
| (142) - DIPPER LAMP, USED WITH NON-EXTENDABLE DIPPER | (480C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/76-12/80) |
| (144) - DIPPER LAMP, USED WITH EXTENDABLE DIPPER | (480C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/76-12/80) |
| (400) - FRONT COUNTERWEIGHT | (480C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/76-12/80) |
| (404) - BACKHOE MOUNTING FRAME | (480C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/76-12/80) |
| (052) - THROTTLE CONTROL LINKAGE | (480D) - CASE CONSTRUCTION KING LOADER BACKHOE (7/80-12/86) |
| (176) - TRANSAXLE AND DIFFERENTIAL LOCK, USED BEFORE TRANSAXLE S/N 16270319 | (480D) - CASE CONSTRUCTION KING LOADER BACKHOE (7/80-12/86) |
| (178) - TRANSAXLE AND DIFFERENTIAL LOCK, USED ON TRANSAXLE S/N 16270319 AND AFTER | (480D) - CASE CONSTRUCTION KING LOADER BACKHOE (7/80-12/86) |
| (184) - TRANSMISSION HOUSING, TRANSAXLE, TRANSMISSION S/N 16270319 AND AFTER | (480D) - CASE CONSTRUCTION KING LOADER BACKHOE (7/80-12/86) |
| (112) - TRACTOR LAMP ELECTRICAL CIRCUIT, WITH CANOPY | (480D) - CASE CONSTRUCTION KING LOADER BACKHOE (7/80-12/86) |
| (114) - TRACTOR LAMP ELECTRICAL CIRCUIT, WITH CAB | (480D) - CASE CONSTRUCTION KING LOADER BACKHOE (7/80-12/86) |
| (130) - DIPPER LAMP, USED WITH NON-EXTENDABLE DIPPER, 480D MODELS ONLY | (480D) - CASE CONSTRUCTION KING LOADER BACKHOE (7/80-12/86) |
| (132) - DIPPER LAMP, USED WITH EXTENDABLE DIPPER, 480D MODELS ONLY | (480D) - CASE CONSTRUCTION KING LOADER BACKHOE (7/80-12/86) |
| (422) - BACKHOE BOOM LOCK CONTROL, 480D MODELS ONLY | (480D) - CASE CONSTRUCTION KING LOADER BACKHOE (7/80-12/86) |
| (428) - BACKHOE MOUNTING FRAME, 480D MODELS ONLY | (480D) - CASE CONSTRUCTION KING LOADER BACKHOE (7/80-12/86) |
| (3-04) - THROTTLE CONTROL LINKAGE | (480E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/86-12/89) |
| (4-31A) - TRACTOR LAMP ELECTRICAL CIRCUIT, FENDER MOUNTED REAR LAMP | (480E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/86-12/89) |
| (4-56) - DIPPER LAMP, USED WITH NON-EXTENDABLE DIPPER, 480E MODELS ONLY | (480E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/86-12/89) |
| (4-58) - DIPPER LAMP, USED WITH EXTENDABLE DIPPER, 480E MODELS ONLY | (480E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/86-12/89) |
| (6-50) - TRANSAXLE TRANSMISSION HOUSING, 2 WHEEL DRIVE | (480E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/86-12/89) |
| (9-024) - BACKHOE BOOM LOCK CONTROL, 480E MODELS ONLY | (480E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/86-12/89) |
| (9-030) - BACKHOE MOUNTING FRAME, 480E MODELS ONLY | (480E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/86-12/89) |
| (9-078) - 3-POINT HITCH DRAFT ARMS,LINKAGE,& CYL CATEGORYI-II HYD HITCH MODELS W/1" MOUNTING HOLE IN PITCH CYL | (480E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/86-12/89) |
| (3-04) - THROTTLE CONTROL LINKAGE | (480E LL) - CASE CONSTRUCTION KING LOADER BACKHOE (1/86-12/89) |
| (4-31A) - TRACTOR LAMP ELECTRICAL CIRCUIT, FENDER MOUNTED REAR LAMP | (480E LL) - CASE CONSTRUCTION KING LOADER BACKHOE (1/86-12/89) |
| (6-50) - TRANSAXLE TRANSMISSION HOUSING, 2 WHEEL DRIVE | (480E LL) - CASE CONSTRUCTION KING LOADER BACKHOE (1/86-12/89) |
| (9-078) - 3-POINT HITCH DRAFT ARMS,LINKAGE,& CYL CATEGORYI-II HYD HITCH MODELS W/1" MOUNTING HOLE IN PITCH CYL | (480E LL) - CASE CONSTRUCTION KING LOADER BACKHOE (1/86-12/89) |
| (6-46) - TRANSAXLE TRANSMISSION HOUSING, 2 WHEEL DRIVE | (480F) - CASE CONSTRUCTION KING LOADER BACKHOE (9/89-12/94) |
| (9-072) - THREE-POINT HITCH DRAFT ARMS, LINKAGE, & CYL., MODELS W/OFFSET HITCH FRAME SIDES & 23-1/2" ROCKSHAFT | (480F) - CASE CONSTRUCTION KING LOADER BACKHOE (9/89-12/94) |
| (6-46) - TRANSAXLE TRANSMISSION HOUSING, 2 WHEEL DRIVE | (480F LL) - CASE CONSTRUCTION KING LOADER BACKHOE (9/89-12/94) |
| (9-072) - THREE-POINT HITCH DRAFT ARMS, LINKAGE, & CYL., MODELS W/OFFSET HITCH FRAME SIDES & 23-1/2" ROCKSHAFT | (480F LL) - CASE CONSTRUCTION KING LOADER BACKHOE (9/89-12/94) |
| (052) - THROTTLE CONTROL LINKAGE | (480LL) - CASE CONSTRUCTION KING LOADER BACKHOE (1/81-12/86) |
| (176) - TRANSAXLE AND DIFFERENTIAL LOCK, USED BEFORE TRANSAXLE S/N 16270319 | (480LL) - CASE CONSTRUCTION KING LOADER BACKHOE (1/81-12/86) |
| (178) - TRANSAXLE AND DIFFERENTIAL LOCK, USED ON TRANSAXLE S/N 16270319 AND AFTER | (480LL) - CASE CONSTRUCTION KING LOADER BACKHOE (1/81-12/86) |
| (184) - TRANSMISSION HOUSING, TRANSAXLE, TRANSMISSION S/N 16270319 AND AFTER | (480LL) - CASE CONSTRUCTION KING LOADER BACKHOE (1/81-12/86) |
| (112) - TRACTOR LAMP ELECTRICAL CIRCUIT, WITH CANOPY | (480LL) - CASE CONSTRUCTION KING LOADER BACKHOE (1/81-12/86) |
| (114) - TRACTOR LAMP ELECTRICAL CIRCUIT, WITH CAB | (480LL) - CASE CONSTRUCTION KING LOADER BACKHOE (1/81-12/86) |
| (138) - VALVE AND CONTROLS, DRAFT-O-MATIC | (580) - CASE CONSTRUCTION KING TRACTOR (BSN 8685800) (NORTH AMERICA) (1/66-12/71) |
| (018) - AIR CLEANER AND AIR INTAKE PARTS, MODELS WITH TURBOCHARGED ENGINE | (580E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/83-12/89) |
| (070) - THROTTLE CONTROL LINKAGE | (580E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/83-12/89) |
| (096) - AIR CONDITIONING COMPRESSOR MOUNTING, BOLT-ON HINGE BRACKET, | (580E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/83-12/89) |
| (150) - DIPPER LAMP, USED WITH EXTENDABLE DIPPER | (580E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/83-12/89) |
| (238) - TRANSAXLE TRANSMISSION HOUSING, PRIOR TO TRANSMISSION SERIAL 16270319 | (580E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/83-12/89) |
| (240) - TRANSAXLE TRANSMISSION HOUSING, 2 WHEEL DRIVE, TRANSMISSION SN 16270319 & AFTER | (580E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/83-12/89) |
| (362) - BACKHOE DIPPER CYLINDER HYDRAULIC CIRCUIT, MODELS WITH TWO BOOM MOUNTING PINS AT SWING TOWER | (580E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/83-12/89) |
| (366) - BACKHOE BUCKET CYL HYD CIRCUIT,MODEL W/O EXTENDABLE DIPPER MODEL W/2BOOM MOUNTING PIN AT SWING TOWER | (580E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/83-12/89) |
| (372) - BACKHOE BUCKET CYL HYD CIRCUIT,MODEL W/EXTENDABLE DIPPER MODELS W/2BOOM MOUNTING PIN AT SWING TOWER | (580E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/83-12/89) |
| (492) - LOADER ANTIROLLBACK CONTROL | (580E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/83-12/89) |
| (526) - BACKHOE SWING CYLINDERS AND SWING TOWER | (580E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/83-12/89) |
| (018) - AIR CLEANER AND AIR INTAKE PARTS, MODELS WITH TURBOCHARGED ENGINE | (580SE) - CASE SUPER-E CONSTRUCTION KING LOADER BACKHOE (1/83-12/87) |
| (070) - THROTTLE CONTROL LINKAGE | (580SE) - CASE SUPER-E CONSTRUCTION KING LOADER BACKHOE (1/83-12/87) |
| (096) - AIR CONDITIONING COMPRESSOR MOUNTING, BOLT-ON HINGE BRACKET, | (580SE) - CASE SUPER-E CONSTRUCTION KING LOADER BACKHOE (1/83-12/87) |
| (150) - DIPPER LAMP, USED WITH EXTENDABLE DIPPER | (580SE) - CASE SUPER-E CONSTRUCTION KING LOADER BACKHOE (1/83-12/87) |
| (238) - TRANSAXLE TRANSMISSION HOUSING, PRIOR TO TRANSMISSION SERIAL 16270319 | (580SE) - CASE SUPER-E CONSTRUCTION KING LOADER BACKHOE (1/83-12/87) |
| (240) - TRANSAXLE TRANSMISSION HOUSING, 2 WHEEL DRIVE, TRANSMISSION SN 16270319 & AFTER | (580SE) - CASE SUPER-E CONSTRUCTION KING LOADER BACKHOE (1/83-12/87) |
| (362) - BACKHOE DIPPER CYLINDER HYDRAULIC CIRCUIT, MODELS WITH TWO BOOM MOUNTING PINS AT SWING TOWER | (580SE) - CASE SUPER-E CONSTRUCTION KING LOADER BACKHOE (1/83-12/87) |
| (366) - BACKHOE BUCKET CYL HYD CIRCUIT,MODEL W/O EXTENDABLE DIPPER MODEL W/2BOOM MOUNTING PIN AT SWING TOWER | (580SE) - CASE SUPER-E CONSTRUCTION KING LOADER BACKHOE (1/83-12/87) |
| (372) - BACKHOE BUCKET CYL HYD CIRCUIT,MODEL W/EXTENDABLE DIPPER MODELS W/2BOOM MOUNTING PIN AT SWING TOWER | (580SE) - CASE SUPER-E CONSTRUCTION KING LOADER BACKHOE (1/83-12/87) |
| (492) - LOADER ANTIROLLBACK CONTROL | (580SE) - CASE SUPER-E CONSTRUCTION KING LOADER BACKHOE (1/83-12/87) |
| (526) - BACKHOE SWING CYLINDERS AND SWING TOWER | (580SE) - CASE SUPER-E CONSTRUCTION KING LOADER BACKHOE (1/83-12/87) |
| (312) - LOADER RETURN-TO-DIG PARTS | (780B) - CASE CONSTRUCTION KING LOADER BACKHOE (7/81-12/85) |
| (4-090) - BATTERY CABLES AND CONNECTIONS | (780C) - CASE CONSTRUCTION KING LOADER BACKHOE (12/81-12/88) |
| (4-140) - 24 VOLT DIPPER LAMP, USED WITH NON-EXTENDABLE DIPPER | (780C) - CASE CONSTRUCTION KING LOADER BACKHOE (12/81-12/88) |
| (4-142) - 12 VOLT DIPPER LAMP, USED WITH NON-EXTENDABLE DIPPER | (780C) - CASE CONSTRUCTION KING LOADER BACKHOE (12/81-12/88) |
| (4-144) - 24 VOLT DIPPER LAMP, USED WITH EXTENDABLE DIPPER | (780C) - CASE CONSTRUCTION KING LOADER BACKHOE (12/81-12/88) |
| (4-146) - 12 VOLT DIPPER LAMP, USED WITH EXTENDABLE DIPPER | (780C) - CASE CONSTRUCTION KING LOADER BACKHOE (12/81-12/88) |
| (9-352) - LOADER ANTIROLLBACK CONTROL | (780C) - CASE CONSTRUCTION KING LOADER BACKHOE (12/81-12/88) |
| (9-408) - FRONT COUNTERWEIGHT, STANDARD COUNTERWEIGHT | (780C) - CASE CONSTRUCTION KING LOADER BACKHOE (12/81-12/88) |
| (4-14) - BATTERY CABLES AND CONNECTIONS | (780D) - CASE CONSTRUCTION KING LOADER BACKHOE (7/88-12/93) |
| (7-06) - BRAKE MASTER CYLINDER HYDRAULIC CIRCUIT | (780D) - CASE CONSTRUCTION KING LOADER BACKHOE (7/88-12/93) |
| (066) - THROTTLE CONTROL LINKAGE | (580D) - CASE CONSTRUCTION KING LOADER BACKHOE (1/80-12/84) |
| (136) - DIPPER LAMP, USED WITH EXTENDABLE DIPPER | (580D) - CASE CONSTRUCTION KING LOADER BACKHOE (1/80-12/84) |
| (428) - LOADER ANTIROLLBACK CONTROL | (580D) - CASE CONSTRUCTION KING LOADER BACKHOE (1/80-12/84) |
| (464) - BACKHOE SWING CYLINDERS AND SWING TOWER | (580D) - CASE CONSTRUCTION KING LOADER BACKHOE (1/80-12/84) |
| (316) - FLOOR PLATES AND 4 WHEEL DRIVE DROP BOX CONTROL | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE AFTER S/N 3739160 (EUROPE) (1/87-12/88) |
| (062) - ENGINE COMPRESSOR DRIVE AND MOUNTING PARTS | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (304) - LOADER RETURN-TO-DIG PARTS | (680H) - CASE CONSTRUCTION KING LOADER BACKHOE (1/80-12/84) |
| (02-030) - ENGINE MOUNTING | (580K) - LOADER BACKHOE (NORTH AMERICA) (1/87-12/94) |
| (03-074) - THROTTLE CONTROL LINKAGE | (580K) - LOADER BACKHOE (NORTH AMERICA) (1/87-12/94) |
| (06-200) - SHUTTLE CONTROL AND LINKAGE, USED ON MODELS WITH TILT/TELESCOPING STEERING COLUMN | (580K) - LOADER BACKHOE (NORTH AMERICA) (1/87-12/94) |
| (06-230) - TRANSAXLE TRANSMISSION HOUSING, 2 WHEEL DRIVE | (580K) - LOADER BACKHOE (NORTH AMERICA) (1/87-12/94) |
| (08-320) - BACKHOE BOOM CYLINDER HYDRAULIC CIRCUIT | (580K) - LOADER BACKHOE (NORTH AMERICA) (1/87-12/94) |
| (08-324) - BACKHOE DIPPER CYLINDER HYDRAULIC CIRCUIT | (580K) - LOADER BACKHOE (NORTH AMERICA) (1/87-12/94) |
| (08-328) - BACKHOE BUCKET CYLINDER HYDRAULIC CIRCUIT, MODELS WITHOUT EXTENDABLE DIPPER | (580K) - LOADER BACKHOE (NORTH AMERICA) (1/87-12/94) |
| (08-332) - BACKHOE BUCKET CYLINDER HYDRAULIC CIRCUIT, MODELS WITH EXTENDABLE DIPPER | (580K) - LOADER BACKHOE (NORTH AMERICA) (1/87-12/94) |
| (09-446) - LOADER ANTIROLLBACK CONTROL | (580K) - LOADER BACKHOE (NORTH AMERICA) (1/87-12/94) |
| (09-458) - BACKHOE CONTROL TOWER, USED ON MODELS WITHOUT TILT BACKHOE CONTROLS | (580K) - LOADER BACKHOE (NORTH AMERICA) (1/87-12/94) |
| (09-460) - BACKHOE CONTROL TOWER, USED ON MODELS WITH FOOT SWING, WITH TILT BACKHOE CONTROLS | (580K) - LOADER BACKHOE (NORTH AMERICA) (1/87-12/94) |
| (09-484) - BACKHOE SWING CYLINDERS AND SWING TOWER | (580K) - LOADER BACKHOE (NORTH AMERICA) (1/87-12/94) |
| (09-532) - THREE-POINT HITCH FRAME, DRAFT ARMS, LINKAGE, AND CYLINDER MOUNTING | (580K) - LOADER BACKHOE (NORTH AMERICA) (1/87-12/94) |
| (8-036) - BACKHOE BOOMCYL. HYD. CIRCUIT, MODELS W/ METAL HOSE CLAMPS AT SWING TOWER (ITEMS 16 & 16A) | (580K) - LOADER BACKHOE (NORTH AMERICA) (ASN JJG0020000) (1/87-12/94) |
| (8-040) - BACKHOE DIPPER CYL.HYD. CIRCUIT, MODELS W/ METAL HOSE CLAMPS AT SWING TOWER ( ITMES 15 & 16) | (580K) - LOADER BACKHOE (NORTH AMERICA) (ASN JJG0020000) (1/87-12/94) |
| (8-048) - BACKHOE BUCKET CYLINDER HYDRAULIC CIRCUIT, MODELS WITHOUT EXTENDABLE DIPPER | (580K) - LOADER BACKHOE (NORTH AMERICA) (ASN JJG0020000) (1/87-12/94) |
| (8-056) - BACKHOE BUCKET CYLINDER HYDRAULIC CIRCUIT, MODELS WITH EXTENDABLE DIPPER | (580K) - LOADER BACKHOE (NORTH AMERICA) (ASN JJG0020000) (1/87-12/94) |
| (9-044) - BACKHOE SWING CYLINDERS AND SWING TOWER | (580K) - LOADER BACKHOE (NORTH AMERICA) (ASN JJG0020000) (1/87-12/94) |
| (4-14) - BATTERY CABLES AND CONNECTIONS | (680L) - CASE CONSTRUCTION KING LOADER BACKHOE (7/88-12/93) |
| (7-06) - BRAKE MASTER CYLINDER HYDRAULIC CIRCUIT | (680L) - CASE CONSTRUCTION KING LOADER BACKHOE (7/88-12/93) |
| (8-036) - BACKHOE DIPPER CYLINDER HYDRAULIC CIRCUIT | (680L) - CASE CONSTRUCTION KING LOADER BACKHOE (7/88-12/93) |
| (066) - THROTTLE CONTROL LINKAGE | (580SD) - CASE SUPER-D CONSTRUCTION KING LOADER BACKHOE (1/80-12/84) |
| (136) - DIPPER LAMP, USED WITH EXTENDABLE DIPPER | (580SD) - CASE SUPER-D CONSTRUCTION KING LOADER BACKHOE (1/80-12/84) |
| (428) - LOADER ANTIROLLBACK CONTROL | (580SD) - CASE SUPER-D CONSTRUCTION KING LOADER BACKHOE (1/80-12/84) |
| (464) - BACKHOE SWING CYLINDERS AND SWING TOWER | (580SD) - CASE SUPER-D CONSTRUCTION KING LOADER BACKHOE (1/80-12/84) |
| (2-22) - ENGINE MOUNTING | (580SK) - LOADER BACKHOE EU (5/90-12/96) |
| (134) - CASTER WHEEL | (1500-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (102[A]) - OVERHEAD GUARD | (1500-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (266) - CASTER WHEEL | (1529) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (096[1]) - OVERHEAD GUARD | (1530) - SERIES-B CASE UNI-LOADER SKID STEER LOADER (S/N 9816704 THRU 9825291) (1/71-12/74) |
| (124) - CASTER WHEEL | (1530) - SERIES-B CASE UNI-LOADER SKID STEER LOADER (S/N 9816704 THRU 9825291) (1/71-12/74) |
| (194) - PALLET FORK AND BRICK GUARD | (1700-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/71-12/88) |
| (226) - CASTER WHEEL | (1700-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/71-12/88) |
| (52) - MANURE FORK | (1816) - CASE UNI-LOADER SKID STEER LOADER (1/73-12/84) |
| (46) - ROLL-OVER PROTECTION STRUCTURE | (1816) - CASE UNI-LOADER SKID STEER LOADER (1/73-12/84) |
| (94) - MAIN FRAME, COUNTERWEIGHTS, AND REAR GUARD | (1816B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/77-12/84) |
| (88) - MANURE FORK AND GRAPPLE | (1816B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/77-12/84) |
| (98) - ROPS CANOPY | (1816B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/77-12/84) |
| (106) - MANURE FORK AND GRAPPLE, HYDRAULIC GRAPPLE ATTACHMENT USED WITH MANURE FORK | (1816C) - CASE UNI-LOADER SKID STEER LOADER (1/83-12/87) |
| (116) - ROPS CANOPY | (1816C) - CASE UNI-LOADER SKID STEER LOADER (1/83-12/87) |
| (2-020) - ENGINE MOUNTING | (1818) - CASE UNI-LOADER SKID STEER LOADER (1/87-12/97) |
| (4-136) - HORN | (1818) - CASE UNI-LOADER SKID STEER LOADER (1/87-12/97) |
| (6-158) - PUMP MOUNTING | (1818) - CASE UNI-LOADER SKID STEER LOADER (1/87-12/97) |
| (9-222) - REAR COUNTERWEIGHT AND SWING OUT DOOR, DIESEL MODELS ONLY | (1818) - CASE UNI-LOADER SKID STEER LOADER (1/87-12/97) |
| (9-224) - REAR COUNTERWEIGHT AND SWING OUT DOOR, GASOLINE MODELS ONLY | (1818) - CASE UNI-LOADER SKID STEER LOADER (1/87-12/97) |
| (9-230) - ROPS - STANDARD | (1818) - CASE UNI-LOADER SKID STEER LOADER (1/87-12/97) |
| (4-28) - HORN | (1818) - CASE UNI-LOADER SKID STEER LOADER (AFTER S/N JAF0069386) (1/91-12/97) |
| (6-02) - PUMP MOUNTING | (1818) - CASE UNI-LOADER SKID STEER LOADER (AFTER S/N JAF0069386) (1/91-12/97) |
| (8-14) - AUXILIARY CONTROLS AND VALVE MOUNTING | (1818) - CASE UNI-LOADER SKID STEER LOADER (AFTER S/N JAF0069386) (1/91-12/97) |
| (9-02) - CHASSIS AND COVERS | (1818) - CASE UNI-LOADER SKID STEER LOADER (AFTER S/N JAF0069386) (1/91-12/97) |
| (4-26) - HORN | (1825) - CASE UNI-LOADER SKID STEER LOADER (S/N JAF0069587 & AFTER) (7/90-12/97) |
| (8-36) - AUXILIARY CONTROLS AND VALVE MOUNTING | (1825) - CASE UNI-LOADER SKID STEER LOADER (S/N JAF0069587 & AFTER) (7/90-12/97) |
| (4-128) - HORN | (1825) - CASE UNI-LOADER SKID STEER LOADER (UP TO S/N JAF0069586) (1/87-12/97) |
| (9-208) - REAR COUNTERWEIGHT AND SWING OUT DOOR | (1825) - CASE UNI-LOADER SKID STEER LOADER (UP TO S/N JAF0069586) (1/87-12/97) |
| (9-214) - ROPS, STANDARD | (1825) - CASE UNI-LOADER SKID STEER LOADER (UP TO S/N JAF0069586) (1/87-12/97) |
| (4-24) - HORN, NORTH AMERICA | (1825B) - CASE UNI-LOADER SKID STEER LOADER (1/96-12/03) |
| (094) - DRIVE CHAIN AND GEARS | (1830) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/74-12/80) |
| (186) - SCARIFIER | (1830) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/74-12/80) |
| (6-138) - TANDEM PUMP ASSEMBLY AND MOUNTING | (1835B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/82-12/87) |
| (6-146) - TANDEM PUMP ASSEMBLY, LEFT-HAND DRIVE PUMP | (1835B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/82-12/87) |
| (8-170) - AUXILIARY CONTROLS AND VALVE MOUNTING | (1835B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/82-12/87) |
| (6-22) - TANDEM PUMP MOUNTING | (1835C) - CASE UNI-LOADER SKID STEER LOADER (7/87-12/95) |
| (9-50) - ROPS - PRIOR TO P.I.N. JAF0013535 | (1835C) - CASE UNI-LOADER SKID STEER LOADER (7/87-12/95) |
| (9-52) - ROPS - P.I.N. JAF0013535 THROUGH JAF0037366 | (1835C) - CASE UNI-LOADER SKID STEER LOADER (7/87-12/95) |
| (9-54) - ROPS - P.I.N. JAF0037367 AND AFTER | (1835C) - CASE UNI-LOADER SKID STEER LOADER (7/87-12/95) |
| (07-04) - DISC BRAKE, (ITALIAN D.G.M.) | (1840) - CASE UNI-LOADER SKID STEER LOADER (1/89-12/01) |
| (242) - MANURE FORK AND GRAPPLE | (1845) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/75-12/88) |
| (252) - SCARIFIER, IDENTIFICATION PLATE AND SN ON UPPER LH SIDE OF FRAME | (1845) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/75-12/88) |
| (266) - ROLL-OVER PROTECTION STRUCTURE, EARLY PRODUCTION - SEE ITEMS 15,19 & 20 FOR IDENTIFICATION | (1845) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/75-12/88) |
| (268) - ROLL-OVER PROTECTION STRUCTURE, LATE PRODUCTION - SEE ITEMS 15,19 & 20 FOR IDENTIFICATION | (1845) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/75-12/88) |
| (274) - REAR SCREENS FOR FORESTRY MODELS | (1845) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/75-12/88) |
| (126) - TANDEM PUMP ASSEMBLY AND MOUNTING | (1845B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/83-12/85) |
| (134) - TANDEM PUMP ASSEMBLY, LEFT-HAND DRIVE PUMP | (1845B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/83-12/85) |
| (142) - DRIVE CHAIN AND GEARS | (1845B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/83-12/85) |
| (190) - AUXILIARY EQUIPMENT CONTROLS, SELECTOR VALVE AND MOUNTING, BASIC AUXILIARY CONTROL | (1845B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/83-12/85) |
| (206) - MANURE FORK AND GRAPPLE | (1845B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/83-12/85) |
| (210) - COUNTERWEIGHTS & DRAWBAR, SWING OUT COUNTERWT, FRONT COUNTERWT, REAR COUNTERWT, DRAWBAR | (1845B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/83-12/85) |
| (214) - SEAT MOUNTING AND SEAT BELTS | (1845B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/83-12/85) |
| (218) - FLOOR PLATES, FLOORMATS, AND ENGINE GUARDS | (1845B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/83-12/85) |
| (220) - ROPS CANOPY AND SIDE SCREENS | (1845B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/83-12/85) |
| (230) - FORESTRY GUARDS, REAR SCREENS | (1845B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/83-12/85) |
| (114) - FORWARD AND REVERSE CONTROLS | (1845B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/83-12/85) |
| (02-02) - MOUNT, ENGINE - MUFFLER | (1845C) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/85-12/01) |
| (04-09) - HORN, - JAF0040227 | (1845C) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/85-12/01) |
| (09-05) - CASE COUPLER - SIDE LEVER, JAF0041368 - JAF0179684 | (1845C) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/85-12/01) |
| (09-32) - PLATES, FLOOR - GUARDS, DRIVE LINE | (1845C) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/85-12/01) |
| (09-33) - CANOPY, ROPS - FRAME AND PANELS (NORTH AMERICA), - JAF0040227 | (1845C) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/85-12/01) |
| (242) - MANURE FORK AND GRAPPLE | (1845S) - CASE UNI-LOADER SKID STEER LOADER (1/75-12/88) |
| (252) - SCARIFIER, IDENTIFICATION PLATE AND SN ON UPPER LH SIDE OF FRAME | (1845S) - CASE UNI-LOADER SKID STEER LOADER (1/75-12/88) |
| (266) - ROLL-OVER PROTECTION STRUCTURE, EARLY PRODUCTION - SEE ITEMS 15,19 & 20 FOR IDENTIFICATION | (1845S) - CASE UNI-LOADER SKID STEER LOADER (1/75-12/88) |
| (268) - ROLL-OVER PROTECTION STRUCTURE, LATE PRODUCTION - SEE ITEMS 15,19 & 20 FOR IDENTIFICATION | (1845S) - CASE UNI-LOADER SKID STEER LOADER (1/75-12/88) |
| (274) - REAR SCREENS FOR FORESTRY MODELS | (1845S) - CASE UNI-LOADER SKID STEER LOADER (1/75-12/88) |
| (280) - HOOD AND SIDE SHIELDS, USED ON MODELS WITH HORIZONTAL AIR INTAKE ONLY | (475) - CASE CABLE LAYER W/336 ENGINE (S/N 3058169 & AFTER) (1/72-12/83) |
| (7-04) - PARKING BRAKE CALIPER | (360) - CASE TRENCHER (1/86-12/04) |
| (9-086) - CRUMBER, DIGGING CHAIN GUARD, AND MOUNTING, FOR ALL TRENCHERS EXCEPT INTEGRAL QUAD | (660) - CASE TRENCHER (1/86-12/03) |
| (07-004) - PARKING BRAKE CALIPER - H638718 | (760) - CASE TRENCHER (1/00-12/04) |
| (09-092) - CRUMBER, DIGGING CHAIN GUARD, AND MOUNTING, MODELS WITH SHORT CRUMBER BLADE BRACKET, ITEM 12 | (760) - CASE TRENCHER (1/00-12/04) |
| (09-094) - CRUMBER, DIGGING CHAIN GUARD, AND MOUNTING, MODELS WITH LONG CRUMBER BLADE BRACKET, ITEM 12 | (760) - CASE TRENCHER (1/00-12/04) |
| (09-108) - HYDRA-BORER WATER PUMP MOUNTING | (760) - CASE TRENCHER (1/00-12/04) |
| (9-078) - CRUMBER, DIGGING CHAIN GUARD AND MOUNTING | (860) - CASE TURBO TRENCHER (2/92-12/02) |
| (078) - HYDROSTATIC PROPULSION PUMP TO MOTOR PRESSSURE CIRCUIT, USED ON 30+4 S/N 5210 TO S/N 1139802 | (P60) - DAVIS FLEETLINE 30+4 TRENCHER (1/70-12/88) |
| (080) - HYDROSTATIC PROPULSION PUMP TO MOTOR PRESSURE CIRCUIT, USED ON 30+4 SERIAL NUMBER 1139802 AND AFTER | (P60) - DAVIS FLEETLINE 30+4 TRENCHER (1/70-12/88) |
| (081A) - HYDROSTATIC PROPULSION PUMP TO MOTOR PRESSURE CIRCUIT, DEUTZ DIESEL ENGINE S/N 1232821 AND AFTER | (P60) - DAVIS FLEETLINE 30+4 TRENCHER (1/70-12/88) |
| (082) - HYDROSTATIC PROPULSION PUMP TO MOTOR PRESSURE CIRCUIT, USED ON 30+4 SPECIAL SER. NO. 3751 AND AFTER | (P60) - DAVIS FLEETLINE 30+4 TRENCHER (1/70-12/88) |
| (284) - BACKFILL BLADE, HYDRAULIC ANGLING, ONE ANGLE CYLINDER | (P60) - DAVIS FLEETLINE 30+4 TRENCHER (1/70-12/88) |
| (292) - OIL COOLER AND FAN MOUNTING | (P60) - DAVIS FLEETLINE 30+4 TRENCHER (1/70-12/88) |
| (152) - STEERING AND EQUIPMENT PUMP MOUNTING, WITH DOUBLE GROOVE BELT, USED ON 40+4 SER. NO. 3400 AND AFTER | (P60) - DAVIS FLEETLINE 30+4 TRENCHER (1/70-12/88) |
| (488) - SWING TOWER AND BOOM MOUNTING | (P60) - DAVIS FLEETLINE 30+4 TRENCHER (1/70-12/88) |
| (208) - JACKSHAFT AND TRENCHER DRIVE CHAIN | (P60) - DAVIS FLEETLINE 30+4 TRENCHER (1/70-12/88) |
| (210) - JACKSHAFT AND TRENCHER DRIVE CHAIN | (P60) - DAVIS FLEETLINE 30+4 TRENCHER (1/70-12/88) |
| (242) - CRUMBER BOOM ATTACHMENTS, BOOMS WITH SPRINGS | (P60) - DAVIS FLEETLINE 30+4 TRENCHER (1/70-12/88) |
| (378) - HYDRA-BORER OR BACKHOE PUMP MOUNTING, USED WITH OR WITHOUT LINE LAYER | (P60) - DAVIS FLEETLINE 30+4 TRENCHER (1/70-12/88) |
| (078) - HYDROSTATIC PROPULSION PUMP TO MOTOR PRESSSURE CIRCUIT, USED ON 30+4 S/N 5210 TO S/N 1139802 | (SD100) - DAVIS FLEETLINE 40+4 TRENCHER (1/70-12/86) |
| (080) - HYDROSTATIC PROPULSION PUMP TO MOTOR PRESSURE CIRCUIT, USED ON 30+4 SERIAL NUMBER 1139802 AND AFTER | (SD100) - DAVIS FLEETLINE 40+4 TRENCHER (1/70-12/86) |
| (081A) - HYDROSTATIC PROPULSION PUMP TO MOTOR PRESSURE CIRCUIT, DEUTZ DIESEL ENGINE S/N 1232821 AND AFTER | (SD100) - DAVIS FLEETLINE 40+4 TRENCHER (1/70-12/86) |
| (082) - HYDROSTATIC PROPULSION PUMP TO MOTOR PRESSURE CIRCUIT, USED ON 30+4 SPECIAL SER. NO. 3751 AND AFTER | (SD100) - DAVIS FLEETLINE 40+4 TRENCHER (1/70-12/86) |
| (284) - BACKFILL BLADE, HYDRAULIC ANGLING, ONE ANGLE CYLINDER | (SD100) - DAVIS FLEETLINE 40+4 TRENCHER (1/70-12/86) |
| (292) - OIL COOLER AND FAN MOUNTING | (SD100) - DAVIS FLEETLINE 40+4 TRENCHER (1/70-12/86) |
| (152) - STEERING AND EQUIPMENT PUMP MOUNTING, WITH DOUBLE GROOVE BELT, USED ON 40+4 SER. NO. 3400 AND AFTER | (SD100) - DAVIS FLEETLINE 40+4 TRENCHER (1/70-12/86) |
| (488) - SWING TOWER AND BOOM MOUNTING | (SD100) - DAVIS FLEETLINE 40+4 TRENCHER (1/70-12/86) |
| (208) - JACKSHAFT AND TRENCHER DRIVE CHAIN | (SD100) - DAVIS FLEETLINE 40+4 TRENCHER (1/70-12/86) |
| (210) - JACKSHAFT AND TRENCHER DRIVE CHAIN | (SD100) - DAVIS FLEETLINE 40+4 TRENCHER (1/70-12/86) |
| (242) - CRUMBER BOOM ATTACHMENTS, BOOMS WITH SPRINGS | (SD100) - DAVIS FLEETLINE 40+4 TRENCHER (1/70-12/86) |
| (378) - HYDRA-BORER OR BACKHOE PUMP MOUNTING, USED WITH OR WITHOUT LINE LAYER | (SD100) - DAVIS FLEETLINE 40+4 TRENCHER (1/70-12/86) |
| (1-10) - DRIVE LINE INSTALLATION | (DH4) - CASE TRENCHER W/1.8L DIESEL ENGINE (1/79-12/88) |
| (1-14) - HYDRAULIC PUMP INSTALLATION | (DH4) - CASE TRENCHER W/1.8L DIESEL ENGINE (1/79-12/88) |
| (2-04) - TRENCHER HEADSHAFT DRIVE LINE INSTALLATION | (DH4) - CASE TRENCHER W/1.8L DIESEL ENGINE (1/79-12/88) |
| (5-04) - BACKHOE KINGPOST INSTALLATION | (DH4) - CASE TRENCHER W/1.8L DIESEL ENGINE (1/79-12/88) |
| (5-09A) - DUAL LEVER BACKHOE CONTROL - REAR MOUNTED | (DH4) - CASE TRENCHER W/1.8L DIESEL ENGINE (1/79-12/88) |
| (5-09C) - DUAL LEVER BACKHOE CONTROL - FRONT MOUNTED | (DH4) - CASE TRENCHER W/1.8L DIESEL ENGINE (1/79-12/88) |
| (6-02) - HYDRA-BORER GEARBOX INSTALLATION | (DH4) - CASE TRENCHER W/1.8L DIESEL ENGINE (1/79-12/88) |
| (1-34) - NON-STICK F/R, CREEP CONTROL INSTALLATION | (DH4) - CASE TRENCHER W/1.8L DIESEL ENGINE (1/79-12/88) |
| (1-40) - ATTACHMENT SPEED CONTROL INSTALLATION | (DH4) - CASE TRENCHER W/1.8L DIESEL ENGINE (1/79-12/88) |
| (1-20) - ENGINE AND HYDRAULIC PUMP INSTALLATION | (DH4) - CASE TRENCHER W/2.1L ENGINE (1/79-12/88) |
| (1-10) - DRIVE LINE INSTALLATION | (DH4) - CASE TRENCHER W/2.1L ENGINE (1/79-12/88) |
| (1-36) - STEERING WHEEL FORWARD AND REVERSE CONTROL INSTALLATION | (DH4) - CASE TRENCHER W/2.1L ENGINE (1/79-12/88) |
| (5-04) - BACKHOE KINGPOST INSTALLATION | (DH4) - CASE TRENCHER W/2.1L ENGINE (1/79-12/88) |
| (5-10) - DUAL LEVER BACKHOE CONTROL - REAR MOUNTED | (DH4) - CASE TRENCHER W/2.1L ENGINE (1/79-12/88) |
| (5-12) - DUAL LEVER BACKHOE CONTROL - FRONT MOUNTED | (DH4) - CASE TRENCHER W/2.1L ENGINE (1/79-12/88) |
| (2-04) - TRENCHER HEADSHAFT DRIVE LINE INSTALLATION | (DH4) - CASE TRENCHER W/2.1L ENGINE (1/79-12/88) |
| (6-02) - HYDRA-BORER GEARBOX INSTALLATION | (DH4) - CASE TRENCHER W/2.1L ENGINE (1/79-12/88) |
| (1-32) - MONO-STICK PROPULSION, CREEP CONTROL INSTALLATION | (DH4) - CASE TRENCHER W/2.1L ENGINE (1/79-12/88) |
| (1-44) - ATTACHMENT SPEED CONTROL INSTALLATION | (DH4) - CASE TRENCHER W/2.1L ENGINE (1/79-12/88) |
| (1-04) - FORWARD AND REVERSE CONTROL INSTALLATION | (DH4) - TRENCHER - STEERING WHEEL SUPPLEMENT (1/79-12/88) |
| (6-134) - PUMP DRIVE | (DH4B) - CASE TRENCHER (1/79-12/91) |
| (6-138) - GROUND DRIVE CONTROLS, MODELS WITH STEERING WHEEL | (DH4B) - CASE TRENCHER (1/79-12/91) |
| (6-140) - CREEP CONTROL - MONO-STICK | (DH4B) - CASE TRENCHER (1/79-12/91) |
| (6-156) - DRIVE SHAFT, GROUND DRIVE MOTOR, AND TRANSMISSION MOUNTING | (DH4B) - CASE TRENCHER (1/79-12/91) |
| (8-194) - ATTACHMENT SPEED CONTROLS | (DH4B) - CASE TRENCHER (1/79-12/91) |
| (8-200) - ATTACHMENT DRIVE PUMP MOUNTING | (DH4B) - CASE TRENCHER (1/79-12/91) |
| (8-286) - DUAL LEVER BACKHOE CONTROLS, REAR MOUNTED BACKHOE HORIZONTAL CONTROL VALVE | (DH4B) - CASE TRENCHER (1/79-12/91) |
| (8-288) - DUAL LEVER BACKHOE CONTROLS, REAR MOUNTED BACKHOE, VERTICAL | (DH4B) - CASE TRENCHER (1/79-12/91) |
| (8-290) - DUAL LEVER BACKHOE CONTROLS, FRONT MOUNTED BACKHOE | (DH4B) - CASE TRENCHER (1/79-12/91) |
| (9-392) - CRUMBER BOOM ATTACHMENTS | (DH4B) - CASE TRENCHER (1/79-12/91) |
| (9-414) - 4-WAY BACKFILL BLADE AND MOUNTING | (DH4B) - CASE TRENCHER (1/79-12/91) |
| (9-416) - 6-WAY BACKFILL BLADE AND MOUNTING, BEFORE PIN 1242820 | (DH4B) - CASE TRENCHER (1/79-12/91) |
| (9-418) - 6-WAY BACKFILL BLADE AND MOUNTING, PIN 1242820 AND AFTER | (DH4B) - CASE TRENCHER (1/79-12/91) |
| (9-448) - HYDRA-BORER GEARBOX AND MOTOR MOUNTING | (DH4B) - CASE TRENCHER (1/79-12/91) |
| (9-452) - HYDRA-BORER WATER PUMP MOUNTING | (DH4B) - CASE TRENCHER (1/79-12/91) |
| (9-468) - PLOW REAR FRAME AND GEARBOX MOUNTING | (DH4B) - CASE TRENCHER (1/79-12/91) |
| (9-486) - BENT PLOW BLADES AND SWIVEL CHUTES, 1" WIDE X 18" X 3/4" CLEARANCE | (DH4B) - CASE TRENCHER (1/79-12/91) |
| (9-488) - BENT PLOW BLADES AND SWIVEL CHUTES, 1" WIDE X 24" X 3/4" CLEARANCE | (DH4B) - CASE TRENCHER (1/79-12/91) |
| (1-20) - ENGINE AND HYDRAULIC PUMP INSTALLATION | (DH4B) - CASE TRENCHER W/2.1L ENGINE (1/79-12/91) |
| (1-10) - DRIVE LINE INSTALLATION | (DH4B) - CASE TRENCHER W/2.1L ENGINE (1/79-12/91) |
| (1-36) - STEERING WHEEL FORWARD AND REVERSE CONTROL INSTALLATION | (DH4B) - CASE TRENCHER W/2.1L ENGINE (1/79-12/91) |
| (5-04) - BACKHOE KINGPOST INSTALLATION | (DH4B) - CASE TRENCHER W/2.1L ENGINE (1/79-12/91) |
| (5-10) - DUAL LEVER BACKHOE CONTROL - REAR MOUNTED | (DH4B) - CASE TRENCHER W/2.1L ENGINE (1/79-12/91) |
| (5-12) - DUAL LEVER BACKHOE CONTROL - FRONT MOUNTED | (DH4B) - CASE TRENCHER W/2.1L ENGINE (1/79-12/91) |
| (2-04) - TRENCHER HEADSHAFT DRIVE LINE INSTALLATION | (DH4B) - CASE TRENCHER W/2.1L ENGINE (1/79-12/91) |
| (6-02) - HYDRA-BORER GEARBOX INSTALLATION | (DH4B) - CASE TRENCHER W/2.1L ENGINE (1/79-12/91) |
| (1-32) - MONO-STICK PROPULSION, CREEP CONTROL INSTALLATION | (DH4B) - CASE TRENCHER W/2.1L ENGINE (1/79-12/91) |
| (1-44) - ATTACHMENT SPEED CONTROL INSTALLATION | (DH4B) - CASE TRENCHER W/2.1L ENGINE (1/79-12/91) |
| (1-04) - FORWARD AND REVERSE CONTROL INSTALLATION | (DH4B) - TRENCHER - STEERING WHEEL SUPPLEMENT (1/79-12/91) |
| (008) - AXLES, TRANSMISSION, DRIVE LINE INSTALLATION | (DH5) - CASE TRENCHER (1/77-12/80) |
| (042) - PROPULSION MOTOR, PLOW MOTOR INSTALLATION | (DH5) - CASE TRENCHER (1/77-12/80) |
| (044) - PROPULSION PUMP, ACCESSORY PUMP, NEUTRAL START INSTALLATION | (DH5) - CASE TRENCHER (1/77-12/80) |
| (002) - FRONT FRAME, HOOD, GRILL | (DH5) - CASE TRENCHER (1/77-12/80) |
| (056) - STEERING AND PROPULSION CONTROLS | (DH5) - CASE TRENCHER (1/77-12/80) |
| (174) - BACKHOE KING POST INSTALLATION | (DH5) - CASE TRENCHER (1/77-12/80) |
| (184) - BACKFILL BLADE INSTALLATION | (DH5) - CASE TRENCHER (1/77-12/80) |
| (090) - P60 PLOW | (DH5) - CASE TRENCHER (1/77-12/80) |
| (104) - QUAD PLOW INSTALLATION | (DH5) - CASE TRENCHER (1/77-12/80) |
| (204) - HYDRA-BORER INSTALLATION | (DH5) - CASE TRENCHER (1/77-12/80) |
| (210) - HYDRA-BORER WATER PUMP KIT, ASSEMBLY, U-JOINT | (DH5) - CASE TRENCHER (1/77-12/80) |
| (224) - TRENCHER DRIVE GEARBOX ASSEMBLY | (DH5) - CASE TRENCHER (1/77-12/80) |
| (006) - SEAT, SEAT BELT | (DH5) - CASE TRENCHER (1/77-12/80) |
| (1-08) - DRIVE LINE INSTALLATION | (DH5) - CASE TRENCHER (S/N 1187961 & AFTER) (1/80-12/86) |
| (1-38) - CREEP CONTROL INSTALLATION | (DH5) - CASE TRENCHER (S/N 1187961 & AFTER) (1/80-12/86) |
| (1-12) - PROPULSION PUMP, ATTACHMENT DRIVE PUMP INSTALLATION | (DH5) - CASE TRENCHER (S/N 1187961 & AFTER) (1/80-12/86) |
| (1-44) - ATTACHMENT SPEED CONTROL INSTALLATION | (DH5) - CASE TRENCHER (S/N 1187961 & AFTER) (1/80-12/86) |
| (1-02) - FRONT FRAME, HOOD, GRILL | (DH5) - CASE TRENCHER (S/N 1187961 & AFTER) (1/80-12/86) |
| (5-04) - BACKHOE KINGPOST INSTALLATION | (DH5) - CASE TRENCHER (S/N 1187961 & AFTER) (1/80-12/86) |
| (2-04) - TRENCHER HEADSHAFT DRIVE LINE INSTALLATION | (DH5) - CASE TRENCHER (S/N 1187961 & AFTER) (1/80-12/86) |
| (3-05A) - CABLE GUIDES | (DH5) - CASE TRENCHER (S/N 1187961 & AFTER) (1/80-12/86) |
| (6-02) - HYDRA-BORER GEARBOX INSTALLATION | (DH5) - CASE TRENCHER (S/N 1187961 & AFTER) (1/80-12/86) |
| (0-4) - PLOW INSTALLATION | (DH5) - TRENCHER - QUAD SUPPLEMENT (S/N 1187961 & AFTER) (1/80-12/88) |
| (04) - FORWARD AND REVERSE CONTROL INSTALLATION | (DH5) - TRENCHER - STEERING WHEEL SUPPLEMENT (1/77-12/88) |
| (2-06) - TRENCHER HEADSHAFT DRIVE INSTALLATION | (DH7) - CASE TRENCHER (1/79-12/82) |
| (3-06) - PLOW GEARBOX, MOTOR INSTALLATION | (DH7) - CASE TRENCHER (1/79-12/82) |
| (6-02) - HYDRA-BORER INSTALLATION | (DH7) - CASE TRENCHER (1/79-12/82) |
| (1-32) - MONO-STICK F/R, CREEP CONTROL INSTALLATION | (DH7) - CASE TRENCHER (1/79-12/82) |
| (1-39A) - ATTACHMENT SPEED CONTROL | (DH7) - CASE TRENCHER (1/79-12/82) |
| (04) - FORWARD AND REVERSE CONTROL INSTALLATION | (DH7) - TRENCHER - STEERING WHEEL SUPPLEMENT (1/79-12/82) |
| (1-10) - DRIVE LINE INSTALLATION | (FH4) - CASE TRENCHER W/LOADER BACKHOE (1/82-12/82) |
| (1-34) - FORWARD AND REVERSE CONTROL INSTALLATION | (FH4) - CASE TRENCHER W/LOADER BACKHOE (1/82-12/82) |
| (1-15A) - HYDRAULIC PUMP INSTALLATION - 2.1 LITRE DIESEL ENGINE | (FH4) - CASE TRENCHER W/LOADER BACKHOE (1/82-12/82) |
| (2-02) - LOADER ARMS, CYLINDER INSTALLATION | (FH4) - CASE TRENCHER W/LOADER BACKHOE (1/82-12/82) |
| (2-06) - LOADER CONTROL INSTALLATION | (FH4) - CASE TRENCHER W/LOADER BACKHOE (1/82-12/82) |
| (3-04) - BACKHOE KINGPOST INSTALLATION | (FH4) - CASE TRENCHER W/LOADER BACKHOE (1/82-12/82) |
| (3-07A) - REAR MOUNTED BACKHOE CONTROL INSTALLATION - DUAL LEVER | (FH4) - CASE TRENCHER W/LOADER BACKHOE (1/82-12/82) |
| (5-78) - CREEP CONTROL LEVER AND STEERING CONTROL VALVE LINKAGE | (CASE) - MAXI-SNEAKER CABLE LAYER (1/83-12/86) |
| (9-184) - HYDRA-BORER MOUNTING | (CASE) - MAXI-SNEAKER CABLE LAYER (1/83-12/86) |
| (9-192) - PLOW PIVOT FRAME, LIFT FRAME, AND CYLINDER | (CASE) - MAXI-SNEAKER CABLE LAYER (1/83-12/86) |
| (9-194) - PLOW BLADE MOUNTING FRAME, GEARBOX, AND LINKS | (CASE) - MAXI-SNEAKER CABLE LAYER (1/83-12/86) |
| (9-210) - PLOW BLADES AND CHUTES, BENT BLADE - 1" X 24" X 3/4" CLEARANCE | (CASE) - MAXI-SNEAKER CABLE LAYER (1/83-12/86) |
| (2-10) - ENGINE MOUNTING | (CASE) - SERIES-B MAXI-SNEAKER CABLE LAYER (1/79-12/86) |
| (9-06) - HOOD, GRILLE, AND CONSOLE | (CASE) - SERIES-B MAXI-SNEAKER CABLE LAYER (1/79-12/86) |
| (9-12) - ATTACHMENT LIFT CONTROL | (CASE) - SERIES-B MAXI-SNEAKER CABLE LAYER (1/79-12/86) |
| (9-24) - HYDRA-BORER MOUNTING | (CASE) - SERIES-B MAXI-SNEAKER CABLE LAYER (1/79-12/86) |
| (9-32) - PLOW PIVOT FRAME, LIFT FRAME, AND CYLINDER | (CASE) - SERIES-B MAXI-SNEAKER CABLE LAYER (1/79-12/86) |
| (9-50) - PLOW BLADES AND CHUTES, BENT BLADE - 1" X 24" X 3/4" CLEARANCE | (CASE) - SERIES-B MAXI-SNEAKER CABLE LAYER (1/79-12/86) |
| (2-6) - ENGINE MOUNTING | (MAXI-SNEAKER C) - 25+4XP TRENCHER (1/90-12/92) |
| (4-02) - ALTERNATOR MOUNTING | (MAXI-SNEAKER C) - 25+4XP TRENCHER (1/90-12/92) |
| (6-20) - CREEP CONTROL, USED ON MODELS PRIOR TO P.I.N. 1242166 | (MAXI-SNEAKER C) - 25+4XP TRENCHER (1/90-12/92) |
| (9-02) - FRONT FRAME, HOOD, AND CONSOLE | (MAXI-SNEAKER C) - 25+4XP TRENCHER (1/90-12/92) |
| (9-22) - JACKSHAFT AND TRENCHER DRIVE CHAIN | (MAXI-SNEAKER C) - 25+4XP TRENCHER (1/90-12/92) |
| (9-48) - CRUMBER BOOM ATTACHMENTS | (MAXI-SNEAKER C) - 25+4XP TRENCHER (1/90-12/92) |
| (9-50) - BACKHOE SWING TOWER MOUNTING, USED ON MODELS WITH SD-70 BACKHOE | (MAXI-SNEAKER C) - 25+4XP TRENCHER (1/90-12/92) |
| (1-18) - STEERING PUMP/ATTACHMENT DRIVE PUMP INSTALLATION | (CASE) - SERIES-B MINI-SNEAKER CABLE LAYER (1/78-12/86) |
| (1-28) - PROPULSION PUMP CONTROL INSTALLATION | (CASE) - SERIES-B MINI-SNEAKER CABLE LAYER (1/78-12/86) |
| (1-10) - AXLE AND DRIVE SHAFT INSTALLATION | (CASE) - SERIES-B MINI-SNEAKER CABLE LAYER (1/78-12/86) |
| (1-12) - PROPULSION MOTOR AND CHAIN DRIVE INSTALLATION | (CASE) - SERIES-B MINI-SNEAKER CABLE LAYER (1/78-12/86) |
| (1-16) - PROPULSION PUMP INSTALLATION | (CASE) - SERIES-B MINI-SNEAKER CABLE LAYER (1/78-12/86) |
| (1-14) - PARKING BRAKE INSTALLATION | (CASE) - SERIES-B MINI-SNEAKER CABLE LAYER (1/78-12/86) |
| (6-02) - HYRDA-BORER MOTOR AND CONTROL VALVE INSTALLATION | (CASE) - SERIES-B MINI-SNEAKER CABLE LAYER (1/78-12/86) |
| (1-02) - FRONT FRAME, HOOD, CONSOLE INSTALLATION | (CASE) - SERIES-B MINI-SNEAKER CABLE LAYER (1/78-12/86) |
| (3-02) - PLOW FRAME AND GEARBOX INSTALLATION | (CASE) - SERIES-B MINI-SNEAKER CABLE LAYER (1/78-12/86) |
| (9-60) - CRUMBER BOOM AND ATTACHMENTS, USED ON MODELS WITH 40", 45" | (TF300) - CASE TRENCHER (1/70-12/00) |
