| Узел | Модель |
|---|
| (54) - A42376 SOLENOID | (336DBT) - CASE ENGINE (1/55-12/79) |
| (96) - STARTER, USED WITH ALL ENGINES | (504BD) - CASE ENGINE (1/55-12/79) |
| (50) - STARTER MOUNTING, 336BD & 336BDT DIESEL ENGINES | (336B) - DROTT ENGINES FOR 35 CRAWLER - B SERIES (1/65-12/79) |
| (080) - MOUNTING FRAME AND STABILIZERS | (32) - BACKHOE AND LOADER FOR 530CK TRACTORS (1/60-12/67) |
| (081A) - MOUNTING FRAME AND STABILIZERS, FOR MODEL 32-S BACKHOE | (32) - BACKHOE AND LOADER FOR 530CK TRACTORS (1/60-12/67) |
| (036) - LOADER PRIMARY HYDRAULICS, LOADER SN. 4200725 AND AFTER | (33) - BACKHOE FOR 580CK (1/60-12/72) |
| (066) - MOUNTING FRAME AND STABILIZERS | (33) - BACKHOE FOR 580CK (1/60-12/72) |
| (070) - SIDE SHIFT FRAME AND STABILIZERS | (33) - BACKHOE FOR 580CK (1/60-12/72) |
| (110) - FOOT PEDALS, FOOT PEDALS WITHOUT LOCKS | (33) - BACKHOE FOR 580CK (1/60-12/72) |
| (170) - 3 POINT HITCH, PRIMARY HYDRAULICS, USED ON NON LOADER MODELS ONLY | (33) - BACKHOE FOR 580CK (1/60-12/72) |
| (180) - 3 POINT HITCH, (WITH UNIT BODY TYPE CONTROL VALVE) HYDRAULICS | (33) - BACKHOE FOR 580CK (1/60-12/72) |
| (182) - 3 POINT HITCH, (WITH SECTIONAL TYPE CONTROL VALVE) HYDRAULICS | (33) - BACKHOE FOR 580CK (1/60-12/72) |
| (082) - SWING CYLINDER HYDRAULICS, CASE-CESSNA VALVES | (35) - LOADER AND BACKHOE FOR 580CK SERIES B (1/73-12/83) |
| (084) - SWING CYL HYDS, CASE- CESSNA VALVES, USED ON MDLS W/ BACKHOE SN 5251151 & AFT | (35) - LOADER AND BACKHOE FOR 580CK SERIES B (1/73-12/83) |
| (094) - BOOM, DIPPER AND BUCKET CYLINDER HYDRAULICS, CASE - CESSNA VALVES | (35) - LOADER AND BACKHOE FOR 580CK SERIES B (1/73-12/83) |
| (386) - DIPPER LIGHT, USED WITH FOUR FOOT EXTENDABLE DIPPER, BACKHOE SN 5288692 & AFT | (35) - LOADER AND BACKHOE FOR 580CK SERIES B (1/73-12/83) |
| (442) - SIDE SHIFT BACKHOE, CONTROL LEVERS AND SWING PEDAL LINKAGE *EARLY PRODUCTION | (35) - LOADER AND BACKHOE FOR 580CK SERIES B (1/73-12/83) |
| (444) - SIDE SHIFT BACKHOE, CONTROL LEVERS AND SWING PEDAL LINKAGE *LATE PRODUCTION | (35) - LOADER AND BACKHOE FOR 580CK SERIES B (1/73-12/83) |
| (454) - HITCH POSITIONING CONTROLS, METRO-SPECIAL MODELS ONLY | (35) - LOADER AND BACKHOE FOR 580CK SERIES B (1/73-12/83) |
| (04) - MOUNTING FRAME AND STABILIZERS | (32) - BACKHOE FOR W7, W9A, W9B, W10 (1/62-12/67) |
| (010) - MOUNTING FRAME AND STABILIZERS | (33) - BACKHOE FOR 310G AND 450 CRAWLER (1/66-12/71) |
| (040) - COUNTERWEIGHTS, FRONT MOUNTED COUNTERWEIGHT, (MODEL 310G CRAWLER ONLY) | (33) - BACKHOE FOR 310G AND 450 CRAWLER (1/66-12/71) |
| (048) - FOOT PEDALS, FOOT PEDALS WITHOUT LOCKS | (33) - BACKHOE FOR 310G AND 450 CRAWLER (1/66-12/71) |
| (010) - MOUNTING FRAME AND STABILIZERS, ALL 33 BACKHOES - ALSO 34 BACKHOES BEFORE SN 1022951 | (33) - BACKHOE FOR W SERIES RIGID LOADERS (1/66-12/71) |
| (036) - LOADER PRIMARY HYDRAULICS, LOADER SN. 4200725 AND AFTER | (33S) - BACKHOE (1/61-12/71) |
| (066) - MOUNTING FRAME AND STABILIZERS | (33S) - BACKHOE (1/61-12/71) |
| (070) - SIDE SHIFT FRAME AND STABILIZERS | (33S) - BACKHOE (1/61-12/71) |
| (110) - FOOT PEDALS, FOOT PEDALS WITHOUT LOCKS | (33S) - BACKHOE (1/61-12/71) |
| (170) - 3 POINT HITCH, PRIMARY HYDRAULICS, USED ON NON LOADER MODELS ONLY | (33S) - BACKHOE (1/61-12/71) |
| (180) - 3 POINT HITCH, (WITH UNIT BODY TYPE CONTROL VALVE) HYDRAULICS | (33S) - BACKHOE (1/61-12/71) |
| (182) - 3 POINT HITCH, (WITH SECTIONAL TYPE CONTROL VALVE) HYDRAULICS | (33S) - BACKHOE (1/61-12/71) |
| (008) - SIDE SHIFT FRAMES AND STABILIZERS | (33S) - BACKHOE FOR CRAWLER MODELS 750, 850, 1150 (1/61-12/71) |
| (032) - FOOT PEDALS | (33S) - BACKHOE FOR CRAWLER MODELS 750, 850, 1150 (1/61-12/71) |
| (04) - MOUNTING FRAME AND STABILIZERS | (34) - BACKHOE FOR 680CK TRACTOR (1/61-12/71) |
| (010) - MOUNTING FRAME AND STABILIZERS, ALL 33 BACKHOES - ALSO 34 BACKHOES BEFORE SN 1022951 | (34) - BACKHOE FOR W SERIES RIGID LOADERS (1/61-12/71) |
| (102) - MOUNTING FRAME AND STABILIZER (USED BEFORE BACKHOE S.N. 1022951) | (34) - BACKHOES FOR CRAWLER MODELS 750, 850, 1150 (1/61-12/71) |
| (104) - MOUNTING FRAME AND STABILIZERS (USED ON BACKHOE S.N. 1022951 AND AFTER) | (34) - BACKHOES FOR CRAWLER MODELS 750, 850, 1150 (1/61-12/71) |
| (146) - HYDRAULIC OIL COOLING SYSTEM | (34) - BACKHOES FOR CRAWLER MODELS 750, 850, 1150 (1/61-12/71) |
| (010) - STABILIZER CYLINDER HYDRAULICS | (35) - BACKHOE FOR 450, 450B, 850, 850B, AND W14 (1/80-12/83) |
| (014) - SWING CYLINDER HYDRAULICS | (35) - BACKHOE FOR 450, 450B, 850, 850B, AND W14 (1/80-12/83) |
| (016) - BOOM CYLINDER HYDRAULICS, BEFORE BACKHOE SN 5356938 | (35) - BACKHOE FOR 450, 450B, 850, 850B, AND W14 (1/80-12/83) |
| (018) - BOOM CYLINDER HYDRAULICS, BACKHOE SN 5356938 AND AFTER | (35) - BACKHOE FOR 450, 450B, 850, 850B, AND W14 (1/80-12/83) |
| (020) - DIPPER CYLINDER HYDRAULIC CIRCUIT | (35) - BACKHOE FOR 450, 450B, 850, 850B, AND W14 (1/80-12/83) |
| (022) - BUCKET CYLINDER HYDRAULIC CIRCUIT, MODELS WITHOUT EXTENDABLE DIPPER | (35) - BACKHOE FOR 450, 450B, 850, 850B, AND W14 (1/80-12/83) |
| (024) - BUCKET CYLINDER HYDRAULIC CIRCUIT, MODELS WITH EXTENDABLE DIPPER, 850 AND 850B ONLY | (35) - BACKHOE FOR 450, 450B, 850, 850B, AND W14 (1/80-12/83) |
| (026) - EXTENDABLE DIPPER CYLINDER HYDRAULIC CIRCUIT, 850 AND 850B ONLY | (35) - BACKHOE FOR 450, 450B, 850, 850B, AND W14 (1/80-12/83) |
| (018) - BUCKET 4-IN-1 | (35) - CASE LOADER BACKHOE ATTACHMENTS (1/73-12/83) |
| (142) - HYDRAULICS OF SWING CYLINDERS (35) WITH CASE AND CESSNA CONTROL VALVES | (35) - CASE LOADER BACKHOE ATTACHMENTS (1/73-12/83) |
| (148) - BOOM, CROWD AND BUCKET HYDRAULICS WITH CASE AND CESSNA CONTROL VALVES | (35) - CASE LOADER BACKHOE ATTACHMENTS (1/73-12/83) |
| (06) - STABILIZER CYLINDER HYDRAULIC CIRCUIT | (35A) - BACKHOE (1/72-12/87) |
| (10) - SWING CYLINDER HYDRAULIC CIRCUIT | (35A) - BACKHOE (1/72-12/87) |
| (14) - BOOM CYLINDER HYDRAULIC CIRCUIT | (35A) - BACKHOE (1/72-12/87) |
| (16) - DIPPER CYLINDER HYDRAULIC CIRCUIT | (35A) - BACKHOE (1/72-12/87) |
| (18) - BUCKET CYLINDER HYDRAULIC CIRCUIT, MODELS WITHOUT EXTENDABLE DIPPER | (35A) - BACKHOE (1/72-12/87) |
| (20) - BUCKET CYLINDER HYDRAULIC CIRCUIT, MODELS WITH EXTENDABLE DIPPER | (35A) - BACKHOE (1/72-12/87) |
| (22) - EXTENDABLE DIPPER HYDRAULIC CIRCUIT | (35A) - BACKHOE (1/72-12/87) |
| (06) - STABILIZER CYLINDER HYDRAULIC CIRCUIT | (35WL) - BACKHOE (1/88-12/94) |
| (10) - SWING CYLINDER HYDRAULIC CIRCUIT | (35WL) - BACKHOE (1/88-12/94) |
| (14) - BOOM CYLINDER HYDRAULIC CIRCUIT | (35WL) - BACKHOE (1/88-12/94) |
| (16) - DIPPER CYLINDER HYDRAULIC CIRCUIT | (35WL) - BACKHOE (1/88-12/94) |
| (18) - BUCKET CYLINDER HYDRAULIC CIRCUIT, MODELS WITHOUT EXTENDABLE DIPPER | (35WL) - BACKHOE (1/88-12/94) |
| (20) - BUCKET CYLINDER HYDRAULIC CIRCUIT, MODELS WITH EXTENDABLE DIPPER | (35WL) - BACKHOE (1/88-12/94) |
| (22) - EXTENDABLE DIPPER HYDRAULIC CIRCUIT | (35WL) - BACKHOE (1/88-12/94) |
| (28) - HYDRAULIC OIL COOLING SYSTEM | (36) - BACKHOE (1/65-12/69) |
| (088) - BRAKE CONTROLS | (680CK) - CASE CONSTRUCTION KING LOADER BACKHOE (UP TO S/N 9101501) (1/66-12/68) |
| (132) - RADIATOR FRAME AND GRILLE | (680CK) - CASE CONSTRUCTION KING LOADER BACKHOE (UP TO S/N 9101501) (1/66-12/68) |
| (137A) - CAB AND RELATED PARTS | (680CK) - CASE CONSTRUCTION KING LOADER BACKHOE (UP TO S/N 9101501) (1/66-12/68) |
| (080) - MOUNTING FRAME AND STABILIZERS | (32S) - BACKHOE AND LOADER (1/60-12/66) |
| (081A) - MOUNTING FRAME AND STABILIZERS, FOR MODEL 32-S BACKHOE | (32S) - BACKHOE AND LOADER (1/60-12/66) |
| (006) - LOADER LIFT FRAME AND RELATED PARTS | (23) - LOADER AND BACKHOE (1/68-12/71) |
| (008) - SIDE SHIFT FRAMES AND STABILIZERS | (26) - BACKHOE (1/65-12/75) |
| (076) - INDIVIDUAL LEVER BACKHOE CONTROL, FOOT SWING, FOR 480 AND 480 B TRACTORS, OR 310G AND 350 CRAWLERS | (26) - BACKHOE (1/65-12/75) |
| (080) - INDIVIDUAL LEVER BACKHOE CONTROL, FOOT SWING | (26) - BACKHOE (1/65-12/75) |
| (118) - COUNTERWEIGHTS, 310G, 350 & 450 CRAWLERS, FRONT MOUNTED COUNTERWEIGHT, MDL. 310G & 350 CRAWLERS ONLY | (26) - BACKHOE (1/65-12/75) |
| (008) - SIDE SHIFT FRAMES AND STABILIZERS | (26B) - BACKHOE (1/65-12/75) |
| (076) - INDIVIDUAL LEVER BACKHOE CONTROL, FOOT SWING, FOR 480 AND 480 B TRACTORS, OR 310G AND 350 CRAWLERS | (26B) - BACKHOE (1/65-12/75) |
| (080) - INDIVIDUAL LEVER BACKHOE CONTROL, FOOT SWING | (26B) - BACKHOE (1/65-12/75) |
| (118) - COUNTERWEIGHTS, 310G, 350 & 450 CRAWLERS, FRONT MOUNTED COUNTERWEIGHT, MDL. 310G & 350 CRAWLERS ONLY | (26B) - BACKHOE (1/65-12/75) |
| (130) - BACKHOE MOUNTING PARTS FOR W14 LOADER | (26C) - BACKHOE (1/75-12/79) |
| (148) - CONTROLS WITH FOOT SWING FOR 350 CRAWLER | (26C) - BACKHOE (1/75-12/79) |
| (008) - SIDE SHIFT FRAMES AND STABILIZERS | (26S) - BACKHOE (1/65-12/75) |
| (076) - INDIVIDUAL LEVER BACKHOE CONTROL, FOOT SWING, FOR 480 AND 480 B TRACTORS, OR 310G AND 350 CRAWLERS | (26S) - BACKHOE (1/65-12/75) |
| (080) - INDIVIDUAL LEVER BACKHOE CONTROL, FOOT SWING | (26S) - BACKHOE (1/65-12/75) |
| (118) - COUNTERWEIGHTS, 310G, 350 & 450 CRAWLERS, FRONT MOUNTED COUNTERWEIGHT, MDL. 310G & 350 CRAWLERS ONLY | (26S) - BACKHOE (1/65-12/75) |
| (070) - TORQUE CONVERTER CONTROL VALVE LINKAGE | (320B) - CASE WHEEL TRACTOR (1/57-12/59) |
| (050) - SELECTAMATIC DOUBLE ACTING SENSING UNIT | (380CK) - CASE G.P. & L.C.G. WHEEL TRACTOR (1/70-12/74) |
| (070) - TORQUE CONVERTER CONTROL VALVE LINKAGE | (420B) - CASE WHEEL TRACTOR (1/57-12/58) |
| (070) - TORQUE CONVERTER CONTROL VALVE LINKAGE | (420BD) - CASE WHEEL TRACTOR (1/57-12/59) |
| (116) - CLUTCH PEDAL AND LINKAGE | (480B) - CASE CONSTRUCTION KING WHEEL TRACTOR (7/71-12/78) |
| (080) - CLUTCH PEDAL AND LINKAGE | (480CK) - CASE CONSTRUCTION KING WHEEL TRACTOR (1/66-12/71) |
| (096) - TRANSMISSION CASE AND AXLE HOUSING | (480CK) - CASE CONSTRUCTION KING WHEEL TRACTOR (1/66-12/71) |
| (008) - LOADER LIFT FRAME AND RELATED PARTS, USED WITH SINGLE TILT CYLINDER ONLY | (26) - LOADER (1/65-12/75) |
| (072) - 3-POINT HITCH PRIMARY HYDRAULICS, USED ON NON-LOADER MODELS ONLY BEF. 3 POINT HITCH SN. 5210976 | (26) - LOADER (1/65-12/75) |
| (074) - 3-POINT HITCH PRIMARY HYD. USES ON NON-LOADER MODELS ONLY 3-POINT HITCH SN. 5210976 THRU 5233158 | (26) - LOADER (1/65-12/75) |
| (008) - LOADER LIFT FRAME AND RELATED PARTS, USED WITH SINGLE TILT CYLINDER ONLY | (26B) - LOADER (1/65-12/75) |
| (072) - 3-POINT HITCH PRIMARY HYDRAULICS, USED ON NON-LOADER MODELS ONLY BEF. 3 POINT HITCH SN. 5210976 | (26B) - LOADER (1/65-12/75) |
| (074) - 3-POINT HITCH PRIMARY HYD. USES ON NON-LOADER MODELS ONLY 3-POINT HITCH SN. 5210976 THRU 5233158 | (26B) - LOADER (1/65-12/75) |
| (036) - LOADER PRIMARY HYDRAULICS, LOADER SN. 4200725 AND AFTER | (33) - LOADER (1/66-12/71) |
| (066) - MOUNTING FRAME AND STABILIZERS | (33) - LOADER (1/66-12/71) |
| (070) - SIDE SHIFT FRAME AND STABILIZERS | (33) - LOADER (1/66-12/71) |
| (110) - FOOT PEDALS, FOOT PEDALS WITHOUT LOCKS | (33) - LOADER (1/66-12/71) |
| (170) - 3 POINT HITCH, PRIMARY HYDRAULICS, USED ON NON LOADER MODELS ONLY | (33) - LOADER (1/66-12/71) |
| (180) - 3 POINT HITCH, (WITH UNIT BODY TYPE CONTROL VALVE) HYDRAULICS | (33) - LOADER (1/66-12/71) |
| (182) - 3 POINT HITCH, (WITH SECTIONAL TYPE CONTROL VALVE) HYDRAULICS | (33) - LOADER (1/66-12/71) |
| (120) - HOOD, SHROUD, COWL AND DASH | (1150) - CASE TORQUE CONVERTER CRAWLER TRACTOR (BEFORE S/N 7109000) (1/65-12/74) |
| (110) - COWL, FLOOR PLATES AND RELATED PARTS | (1150) - CASE TORQUE CONVERTER CRAWLER TRACTOR (S/N 7109000 TO 7110299) (7/68-12/74) |
| (160) - POWER ANGLE TILT DOZER HYDRAULICS, POWER TILT HYDRAULICS, USED ON TRAC. SN 7108999 - 7109298 | (1150) - CASE TORQUE CONVERTER CRAWLER TRACTOR (S/N 7109000 TO 7110299) (7/68-12/74) |
| (162) - POWER ANGLE TILT DOZER HYDRAULICS, POWER TILT HYDRAULICS, USED ON TRAC. SN 7109299 & AFTER | (1150) - CASE TORQUE CONVERTER CRAWLER TRACTOR (S/N 7109000 TO 7110299) (7/68-12/74) |
| (126) - COWL, FLOOR AND RELATED PARTS | (1150) - CASE TORQUE CONVERTER CRAWLER TRACTOR (S/N 7110300 & AFTER) (7/69-12/74) |
| (046) - ELECTRICAL SYSTEM | (1150) - CASE TORQUE CONVERTER CRAWLER TRACTOR (S/N 7110300 & AFTER) (7/69-12/74) |
| (169E) - FELLER BUNCHER, HYDRAULIC LINES AND CYLINDERS | (1150) - CASE TORQUE CONVERTER CRAWLER TRACTOR (S/N 7110300 & AFTER) (7/69-12/74) |
| (176) - POWER ANGLE TILT DOZER HYDRAULICS, POWER TILT CIRCUIT | (1150) - CASE TORQUE CONVERTER CRAWLER TRACTOR (S/N 7110300 & AFTER) (7/69-12/74) |
| (046) - RADIATOR, FANS AND HOSES | (1150B) - CASE CRAWLER TRACTOR (1/73-12/84) |
| (066) - HAND AND FOOT THROTTLE CONTROLS | (1150B) - CASE CRAWLER TRACTOR (1/73-12/84) |
| (110) - REAR ELECTRICAL WIRING, INSTRUMENT PANEL TO STARTER, BATTERY & REAR LIGHT | (1150B) - CASE CRAWLER TRACTOR (1/73-12/84) |
| (230) - TILT HYDRAULIC CIRCUIT (TILT DOZER), 96" (2438 MM) DOZER W/ SIDE MOUNTED TILT HYDRAULIC LINES | (1150B) - CASE CRAWLER TRACTOR (1/73-12/84) |
| (252) - ANGLE TILT PITCH DOZER HYDRAULIC GUARDS, USED BEFORE TRACTOR SN 7305244 | (1150B) - CASE CRAWLER TRACTOR (1/73-12/84) |
| (412) - FELLER BUNCHER, HYDRAULIC LINES AND CYLINDERS | (1150B) - CASE CRAWLER TRACTOR (1/73-12/84) |
| (018) - OIL FILTER AND COOLER, 451BD DIESEL ENGINE, FOR ALTITUDE COMPENSATING ENG. | (1150C) - CASE CRAWLER TRACTOR (NORTH AMERICA) (7/78-12/84) |
| (048) - RADIATOR, FANS, AND HOSES | (1150C) - CASE CRAWLER TRACTOR (NORTH AMERICA) (7/78-12/84) |
| (066) - THROTTLE CONTROL LINKAGE | (1150C) - CASE CRAWLER TRACTOR (NORTH AMERICA) (7/78-12/84) |
| (114) - REAR ELECTRICAL WIRING, INSTRUMENT PANEL TO STARTER, BATTERY USED B4 TRAC SN 7308701 | (1150C) - CASE CRAWLER TRACTOR (NORTH AMERICA) (7/78-12/84) |
| (116) - REAR ELECTRICAL WIRING, BATTERY CABLES TO STARTER, USED ON TRAC SN 7308701 & AFT | (1150C) - CASE CRAWLER TRACTOR (NORTH AMERICA) (7/78-12/84) |
| (270) - ANGLE TILT PITCH HYDRAULIC GUARDS | (1150C) - CASE CRAWLER TRACTOR (NORTH AMERICA) (7/78-12/84) |
| (016) - OIL FILTER AND HEAT EXCHANGER, 504BD AND 504BDT DIESEL | (1150D) - CASE CRAWLER TRACTOR (1/76-12/86) |
| (016) - OIL FILTER AND HEAT EXCHANGER, 504BD AND 504BDT DIESEL | (1155D) - CASE CRAWLER TRACTOR (7/83-12/86) |
| (014) - OIL FILTER AND COOLER, 504BDT DIESEL ENGINE, 1ST USED ENGINE SN 10095016 | (1450) - CASE CRAWLER TRACTOR (1/73-12/80) |
| (044) - RADIATOR, FANS AND HOSES | (1450) - CASE CRAWLER TRACTOR (1/73-12/80) |
| (060) - HAND AND FOOT THROTTLE CONTROLS | (1450) - CASE CRAWLER TRACTOR (1/73-12/80) |
| (098) - REAR ELECTRICAL WIRING, INSTRUMENT PANEL TO STARTER, BATTERY USED TRAC SN 8380101 & AFT | (1450) - CASE CRAWLER TRACTOR (1/73-12/80) |
| (190) - POWER BRAKES | (1450) - CASE CRAWLER TRACTOR (1/73-12/80) |
| (342) - TILT DOZER, PUSH BEAM AND GUARDS | (1450) - CASE CRAWLER TRACTOR (1/73-12/80) |
| (2-14) - OIL FILTER AND HEAT EXCHANGER, 504BDT DIESEL ENGINE | (1450B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (3-60) - THROTTLE CONTROL LINKAGE | (1450B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (4-124) - REAR ELECTRICAL WIRING, GROUP 4D TYPE BATTERIES AND CABLES TO STARTER | (1450B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (9-488) - RADIATOR SHROUD AND *STANDARD (BOLT-ON) GRILLE, DOZER AND DRAWBAR MODELS | (1450B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (9-490) - RADIATOR SHROUD AND *STANDARD (BOLT-ON) GRILLE, LOADER MODELS | (1450B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (2-14) - OIL FILTER AND HEAT EXCHANGER, 504BDT DIESEL ENGINE | (1455B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (3-60) - THROTTLE CONTROL LINKAGE | (1455B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (4-124) - REAR ELECTRICAL WIRING, GROUP 4D TYPE BATTERIES AND CABLES TO STARTER | (1455B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (9-488) - RADIATOR SHROUD AND *STANDARD (BOLT-ON) GRILLE, DOZER AND DRAWBAR MODELS | (1455B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (9-490) - RADIATOR SHROUD AND *STANDARD (BOLT-ON) GRILLE, LOADER MODELS | (1455B) - CASE CRAWLER TRACTOR (1/80-12/87) |
| (272) - HYDRAULIC CYLINDER ASSY, PISTON ROD, END CAPS, TUBE | (800) - CASE CRAWLER TRACTOR (UP TO S/N 7083999) (1/57-12/63) |
| (274) - HYDRAULIC CYLINDER ASSY, PISTON ROD, END CAPS, TUBE | (800) - CASE CRAWLER TRACTOR (UP TO S/N 7083999) (1/57-12/63) |
| (278[1]) - HYDRAULIC CYLINDER ASSY, PISTON ROD, END CAPS, TUBE | (800) - CASE CRAWLER TRACTOR (UP TO S/N 7083999) (1/57-12/63) |
| (278) - HYDRAULIC CYLINDER ASSY, PISTON ROD, END CAPS, TUBE | (800) - CASE CRAWLER TRACTOR (UP TO S/N 7083999) (1/57-12/63) |
| (044) - FULL FLOW FILTER (TYPE I) VERTICAL | (800) - CASE INDUSTRIAL CRAWLER TRACTOR (AFTER S/N 7084000) (1/61-12/63) |
| (222) - 72467 AND 72468 END HINGE LOADER LIFT HYDRAULIC CYLINDERS | (800) - CASE INDUSTRIAL CRAWLER TRACTOR (AFTER S/N 7084000) (1/61-12/63) |
| (224) - R12267 REAR HINGE LOADER LIFT HYDRAULIC CYLINDER | (800) - CASE INDUSTRIAL CRAWLER TRACTOR (AFTER S/N 7084000) (1/61-12/63) |
| (226) - R13564 REAR HINGE LOADER LIFT HYDRAULIC CYLINDER | (800) - CASE INDUSTRIAL CRAWLER TRACTOR (AFTER S/N 7084000) (1/61-12/63) |
| (234[1]) - 70449 BULLDOZER TILT HYDRAULIC CYLINDER | (800) - CASE INDUSTRIAL CRAWLER TRACTOR (AFTER S/N 7084000) (1/61-12/63) |
| (234) - 70743 AND 70744 DOZER LIFT HYDRAULIC CYLINDERS | (800) - CASE INDUSTRIAL CRAWLER TRACTOR (AFTER S/N 7084000) (1/61-12/63) |
| (G04-1) - HOOD, SHROUD AND GRILLE | (850) - CASE CRAWLER TRACTOR (EUROPE) (1/67-12/77) |
| (H03-1) - ANGLE TILT PITCH DOZER HYDRAULICS, TILT AND PITCH CIRCUIT | (850) - CASE CRAWLER TRACTOR (EUROPE) (1/67-12/77) |
| (186) - HOOD, SHROUD AND GRILLE | (850) - CASE CRAWLER TRACTOR (S/N 7073469 & AFTER) (NORTH AMERICA) (1/69-12/77) |
| (230) - POWER ANGLING DOZER - MECHANICAL | (850) - CASE CRAWLER TRACTOR (S/N 7073469 & AFTER) (NORTH AMERICA) (1/69-12/77) |
| (258) - PWR ANGLE TILT PITCH DOZER HYD, TILT & PITCH CIRCUIT-CONTROL VALVE TO CYL, USED BEF. TRAC S/N7074906 | (850) - CASE CRAWLER TRACTOR (S/N 7073469 & AFTER) (NORTH AMERICA) (1/69-12/77) |
| (078) - ELECTRICAL SYSTEM | (850) - CASE CRAWLER TRACTOR (S/N 7073469 & AFTER) (NORTH AMERICA) (1/69-12/77) |
| (081A) - ELECTRICAL SYSTEM - 2 BATTERY MODELS | (850) - CASE CRAWLER TRACTOR (S/N 7073469 & AFTER) (NORTH AMERICA) (1/69-12/77) |
| (250) - POWER ANGLE TILT DOZER HYDRAULICS, TILT CIRCUIT | (850) - CASE CRAWLER TRACTOR (S/N 7073469 & AFTER) (NORTH AMERICA) (1/69-12/77) |
| (272) - PWR ANGLE TILT PITCH DOZER HYD, ANGLING CIRCUIT, USED BEF. TRAC. S/N 7074906 & AFT. | (850) - CASE CRAWLER TRACTOR (S/N 7073469 & AFTER) (NORTH AMERICA) (1/69-12/77) |
| (118) - HOOD, SHROUD AND GRILLE | (850) - CASE CRAWLER TRACTOR (UP TO S/N 7073468) (NORTH AMERICA) (1/67-12/77) |
| (158) - POWER ANGLING DOZER | (850) - CASE CRAWLER TRACTOR (UP TO S/N 7073468) (NORTH AMERICA) (1/67-12/77) |
| (171E) - POWER ANGLE-TILT DOZER HYDRAULICS, (TILT CIRCUIT) | (850) - CASE CRAWLER TRACTOR (UP TO S/N 7073468) (NORTH AMERICA) (1/67-12/77) |
| (064) - THROTTLE CONTROL LINKAGE | (850B) - CASE CRAWLER TRACTOR (1/76-12/84) |
| (358) - GRILLE AND RADIATOR GUARDS | (850B) - CASE CRAWLER TRACTOR (1/76-12/84) |
| (112) - REAR ELEC. WIRING, INSTR. PANEL TO STARTER, BATTERY, & REAR LAMP USED BEFORE TRAC. SN. 7400001 | (850B) - CASE CRAWLER TRACTOR (1/76-12/84) |
| (116) - REAR ELECTRICAL WIRING, BATTERY CABLES TO STARTER, USED ON TRAC. SN. 7400001 & AFTER | (850B) - CASE CRAWLER TRACTOR (1/76-12/84) |
| (060) - THROTTLE CONTROL LINKAGE | (850C) - CASE CRAWLER TRACTOR (1/81-12/84) |
| (314) - GRILLE AND RADIATOR GUARDS | (850C) - CASE CRAWLER TRACTOR (1/81-12/84) |
| (092) - REAR ELECTRICAL WIRING, BATTERY CABLES TO STARTER | (850C) - CASE CRAWLER TRACTOR (1/81-12/84) |
| (060) - THROTTLE CONTROL LINKAGE | (855C) - CASE CRAWLER TRACTOR (1/84-12/84) |
| (314) - GRILLE AND RADIATOR GUARDS | (855C) - CASE CRAWLER TRACTOR (1/84-12/84) |
| (092) - REAR ELECTRICAL WIRING, BATTERY CABLES TO STARTER | (855C) - CASE CRAWLER TRACTOR (1/84-12/84) |
| (198) - POWER ANGLING DOZER | (750) - CASE CRAWLER TRACTOR (AFTER S/N 7070351) (1/63-12/67) |
| (172) - DOZER AND LOADER BASIC TRACTOR HYDRAULICS | (500) - CASE CRAWLER TRACTOR (1/53-12/83) |
| (172) - DOZER AND LOADER BASIC TRACTOR HYDRAULICS | (400) - CASE CRAWLER TRACTOR (1/57-12/83) |
| (082) - BASIC TRACTOR HYDRAULICS | (420) - CASE CRAWLER TRACTOR (S/N 3008188 TO 3012300) (1/55-12/93) |
| (208) - BASIC BACKHOE HYDRAULICS | (420) - CASE CRAWLER TRACTOR (S/N 3008188 TO 3012300) (1/55-12/93) |
| (138) - FENDERS, FUEL TANK, SEAT AND CUSHIONS | (420C) - CASE CRAWLER TRACTOR (S/N 3012301 & AFTER) (1/61-12/62) |
| (174) - LOADER FRAME, LIFT ARM, BUCKETS, AND CYLINDERS | (420C) - CASE CRAWLER TRACTOR (S/N 3012301 & AFTER) (1/61-12/62) |
| (118) - THROTTLE CONTROL LINKAGE | (450) - CASE CRAWLER TRACTOR (PRIOR TO S/N 3038436) (1/65-12/80) |
| (166) - LOADER | (450) - CASE CRAWLER TRACTOR (PRIOR TO S/N 3038436) (1/65-12/80) |
| (194) - CLAM TYPE BUCKET HYDRAULICS | (450) - CASE CRAWLER TRACTOR (PRIOR TO S/N 3038436) (1/65-12/80) |
| (212) - RIPPER HYDRAULICS | (450) - CASE CRAWLER TRACTOR (PRIOR TO S/N 3038436) (1/65-12/80) |
| (214) - PULL BEHIND HYDRAULICS | (450) - CASE CRAWLER TRACTOR (PRIOR TO S/N 3038436) (1/65-12/80) |
| (170) - DROTT 4-IN-1 BUCKET | (450) - CASE CRAWLER TRACTOR (PRIOR TO S/N 3038436) (1/65-12/80) |
| (102) - THROTTLE CONTROL LINKAGE | (450) - CASE CRAWLER TRACTOR (S/N 3038436 TO 3060306) (7/68-12/80) |
| (230) - D36951 DROTT 4-IN-1 BUCKET, USED BEFORE BUCKET SN 4183801 | (450) - CASE CRAWLER TRACTOR (S/N 3038436 TO 3060306) (7/68-12/80) |
| (252) - LOADER OPTIONAL HYDRAULICS | (450) - CASE CRAWLER TRACTOR (S/N 3038436 TO 3060306) (7/68-12/80) |
| (274) - RIPPER HYDRAULICS | (450) - CASE CRAWLER TRACTOR (S/N 3038436 TO 3060306) (7/68-12/80) |
| (042) - THROTTLE CONTROL LINKAGE | (450) - CASE CRAWLER TRACTOR (S/N 3060306 & AFTER) (7/75-12/80) |
| (156) - LOADER ARM AUXILIARY HYDRAULIC CIRCUIT | (450) - CASE CRAWLER TRACTOR (S/N 3060306 & AFTER) (7/75-12/80) |
| (164) - RIPPER HYDRAULIC CIRCUITS, RIPPER WITH DIVERSION VALVE | (450) - CASE CRAWLER TRACTOR (S/N 3060306 & AFTER) (7/75-12/80) |
| (166) - PULL BEHIND HYDRAULIC CIRCUIT | (450) - CASE CRAWLER TRACTOR (S/N 3060306 & AFTER) (7/75-12/80) |
| (036) - RADIATOR, FAN, AND HOSES | (450B) - CASE CRAWLER TRACTOR (1/78-12/83) |
| (044) - THROTTLE CONTROL LINKAGE | (450B) - CASE CRAWLER TRACTOR (1/78-12/83) |
| (046) - FUEL LINES | (450B) - CASE CRAWLER TRACTOR (1/78-12/83) |
| (036) - RADIATOR, FAN, AND HOSES | (455B) - CASE CRAWLER TRACTOR (1/83-12/83) |
| (044) - THROTTLE CONTROL LINKAGE | (455B) - CASE CRAWLER TRACTOR (1/83-12/83) |
| (046) - FUEL LINES | (455B) - CASE CRAWLER TRACTOR (1/83-12/83) |
| (082) - BASIC TRACTOR HYDRAULICS | (310C) - CASE CRAWLER TRACTOR (S/N 3008188 TO 3010989) (1/59-12/90) |
| (064) - FENDERS, FUEL TANK, SEAT, AND CUSHIONS | (310E) - CASE CRAWLER TRACTOR (1/61-12/90) |
| (078) - LOADER FRAME, LIFT ARM, BUCKETS, AND CYLINDERS | (310E) - CASE CRAWLER TRACTOR (1/61-12/90) |
| (130) - FENDERS, FUEL TANK, SEAT, AND CUSHIONS | (310F) - CASE CRAWLER TRACTOR (S/N 3019001 TO 3023000) (1/63-12/64) |
| (234) - BACKHOE MOUNTING PARTS AND STABILIZERS | (310F) - CASE CRAWLER TRACTOR (S/N 3019001 TO 3023000) (1/63-12/64) |
| (120) - COWL DASH. AND THROTTLE CONTROL | (310G) - CASE CRAWLER TRACTOR (S/N 3023001 TO 3032301) (1/64-12/69) |
| (196) - LOADER MECHANICAL PARTS | (310G) - CASE CRAWLER TRACTOR (S/N 3023001 TO 3032301) (1/64-12/69) |
| (206) - DROTT 4-IN-1 BUCKET | (310G) - CASE CRAWLER TRACTOR (S/N 3023001 TO 3032301) (1/64-12/69) |
| (060) - ENGINE FRAME, SIDE PLATES AND SUSPENSION SYSTEM, (36" GAUGE CRAWLERS ONLY) | (310G) - CASE CRAWLER TRACTOR (S/N 3032301 TO 3039619) (1/67-12/69) |
| (092) - ENGINE CONTROLS - GAS | (310G) - CASE CRAWLER TRACTOR (S/N 3032301 TO 3039619) (1/67-12/69) |
| (094) - ENGINE CONTROLS - DIESEL | (310G) - CASE CRAWLER TRACTOR (S/N 3032301 TO 3039619) (1/67-12/69) |
| (144) - LOADER AND ANTI-ROLL BACK | (310G) - CASE CRAWLER TRACTOR (S/N 3032301 TO 3039619) (1/67-12/69) |
| (154) - DROTT 4-IN-1 BUCKET | (310G) - CASE CRAWLER TRACTOR (S/N 3032301 TO 3039619) (1/67-12/69) |
| (060) - ENGINE FRAME AND RELATED PARTS, (36" GAUGE) | (310G) - CASE CRAWLER TRACTOR (S/N 3039619 & AFTER) (7/69-12/69) |
| (092) - ENGINE CONTROLS - GAS | (310G) - CASE CRAWLER TRACTOR (S/N 3039619 & AFTER) (7/69-12/69) |
| (094) - ENGINE CONTROLS - DIESEL | (310G) - CASE CRAWLER TRACTOR (S/N 3039619 & AFTER) (7/69-12/69) |
| (148) - LOADER WITH ANTI - ROLL BACK | (310G) - CASE CRAWLER TRACTOR (S/N 3039619 & AFTER) (7/69-12/69) |
| (158) - D34421 DROTT 4-IN-1 BUCKET | (310G) - CASE CRAWLER TRACTOR (S/N 3039619 & AFTER) (7/69-12/69) |
| (088) - BASIC TRACTOR HYDRAULICS, (SERIAL NO. 3003851 AND AFTER) | (320) - CASE TERRATRAC CRAWLER TRACTOR (S/N 3000001 TO 3008132) (1/57-12/62) |
| (056) - THROTTLE CONTROL LINKAGE | (350) - CASE CRAWLER TRACTOR (1/70-12/80) |
| (408) - ENGINE FRAME, RELATED PARTS AND TORQUE TUBE, TRACTOR SN 3050472 AND AFTER | (350) - CASE CRAWLER TRACTOR (1/70-12/80) |
| (418[1]) - SPECIAL CRANKCASE GUARD MODELS WITH FRONT COUNTERWEIGHT WITHOUT BACKHOE | (350) - CASE CRAWLER TRACTOR (1/70-12/80) |
| (116) - CRAWLER HYDRAULIC CIRCUIT, POWER SHUTTLE TRANSMISSION COOLING SYSTEM | (350) - CASE CRAWLER TRACTOR (1/70-12/80) |
| (356) - BULLDOZER BLADE FOR LOADER | (350) - CASE CRAWLER TRACTOR (1/70-12/80) |
| (358) - D34421 DROTT 4-IN-1 BUCKET | (350) - CASE CRAWLER TRACTOR (1/70-12/80) |
| (400) - FRONT COUNTERWEIGHTS, BACKHOE MODELS | (350) - CASE CRAWLER TRACTOR (1/70-12/80) |
| (410) - HOOD, SHROUD, COWL AND DASH | (350) - CASE CRAWLER TRACTOR (1/70-12/80) |
| (418) - PULL HOOK, CRANKCASE AND TRANSMISSION GUARDS | (350) - CASE CRAWLER TRACTOR (1/70-12/80) |
| (048) - THROTTLE CONTROL LINKAGE | (350B) - CASE CRAWLER TRACTOR (1/79-12/83) |
| (092) - POWER SHUTTLE COOLING SYSTEM | (350B) - CASE CRAWLER TRACTOR (1/79-12/83) |
| (046) - FULL FLOW FILTER, TYPE I, VERTICAL | (1000) - CASE TERRATRAC CRAWLER TRACTOR (S/N 7010001 TO 7100001) (1/61-12/62) |
| (258) - 70587 AND 70588 END HINGE LOADER LIFT HYDRAULIC CYLINDERS | (1000) - CASE TERRATRAC CRAWLER TRACTOR (S/N 7010001 TO 7100001) (1/61-12/62) |
| (260) - 72891 REAR HINGE LOADER LIFT HYDRAULIC CYLINDER | (1000) - CASE TERRATRAC CRAWLER TRACTOR (S/N 7010001 TO 7100001) (1/61-12/62) |
| (262) - R13565 REAR HINGE LOADER LIFT HYDRAULIC CYLINDER | (1000) - CASE TERRATRAC CRAWLER TRACTOR (S/N 7010001 TO 7100001) (1/61-12/62) |
| (264) - 73046 REAR HINGE LOADER DUMP HYDRAULIC CYLINDER | (1000) - CASE TERRATRAC CRAWLER TRACTOR (S/N 7010001 TO 7100001) (1/61-12/62) |
| (268[1]) - 70449 BULLDOZER TILT HYDRAULIC CYLINDER | (1000) - CASE TERRATRAC CRAWLER TRACTOR (S/N 7010001 TO 7100001) (1/61-12/62) |
| (268) - 70743 AND 70744 DOZER LIFT HYDRAULIC CYLINDERS | (1000) - CASE TERRATRAC CRAWLER TRACTOR (S/N 7010001 TO 7100001) (1/61-12/62) |
| (302) - HYDRAULIC CYLINDER ASSEMBLY, PISTON ROD, END CAPS, TUBE | (1000C) - CASE TERRATRAC CRAWLER TRACTOR (S/N 7103001 & AFTER) (1/59-12/63) |
| (304) - HYDRAULIC CYLINDER ASSEMBLY | (1000C) - CASE TERRATRAC CRAWLER TRACTOR (S/N 7103001 & AFTER) (1/59-12/63) |
| (306) - HYDRAULIC CYLINDER ASSEMBLY | (1000C) - CASE TERRATRAC CRAWLER TRACTOR (S/N 7103001 & AFTER) (1/59-12/63) |
| (308) - HYDRAULIC CYLINDER ASSEMBLY | (1000C) - CASE TERRATRAC CRAWLER TRACTOR (S/N 7103001 & AFTER) (1/59-12/63) |
| (312) - HYDRAULIC CYLINDER ASSEMBLY, PISTON ROD, END CAPS, TUBE | (1000C) - CASE TERRATRAC CRAWLER TRACTOR (S/N 7103001 & AFTER) (1/59-12/63) |
| (006) - ENGINE FRAME AND RELATED PARTS | (1000D) - CASE CRAWLER TRACTOR (S/N 7103001 & AFTER) (1/60-12/66) |
| (284) - R13565 LOADER LIFT CYLINDER, USED BEFORE TRACTOR SN. 7104001 | (1000D) - CASE CRAWLER TRACTOR (S/N 7103001 & AFTER) (1/60-12/66) |
| (286) - D29647 LOADER LIFT CYLINDER, USED ON TRACTOR SERIAL NO. 7104001 & AFTER | (1000D) - CASE CRAWLER TRACTOR (S/N 7103001 & AFTER) (1/60-12/66) |
| (288) - R19755 AND R19756 LOADER DUMP CYLINDERS, USED BEFORE TRACTOR SN. 7106273 | (1000D) - CASE CRAWLER TRACTOR (S/N 7103001 & AFTER) (1/60-12/66) |
| (290) - D36685 AND D36686 LOADER DUMP CYLINDERS, USED ON TRACTOR SN. 7106273 & AFTER | (1000D) - CASE CRAWLER TRACTOR (S/N 7103001 & AFTER) (1/60-12/66) |
| (302) - R19299 DOZER LIFT CYLINDER | (1000D) - CASE CRAWLER TRACTOR (S/N 7103001 & AFTER) (1/60-12/66) |
| (100) - DOZER AND LOADER BASIC TRACTOR HYDRAULICS | (520) - CASE TERRATRAC CRAWLER TRACTOR (1/54-12/62) |
| (256) - WINCH CONTROL STAND INSTALLATION, STAND, SPRINGS, LEVERS, MT'G. PARTS | (600) - CASE TERRATRAC CRAWLER TRACTOR (DIESEL) (1/57-12/58) |
| (162) - TERRALOAD'R HYDRAULIC INSTALLATION, PUMP, VALVE, HOSES, TUBING, FITTINGS | (600) - CASE TERRATRAC CRAWLER TRACTOR (DIESEL) (1/57-12/58) |
| (166) - TERRALOAD'R HYDRAULIC INST, PUMP, VALVE, HOSES, TUBING, FITTINGS (USED FROM S/N 7060799) | (600) - CASE TERRATRAC CRAWLER TRACTOR (DIESEL) (1/57-12/58) |
| (176) - STRAIGHT OR ANGLE DOZER HYDRAULIC INST., (USED UP TO S/N 7060799) | (600) - CASE TERRATRAC CRAWLER TRACTOR (DIESEL) (1/57-12/58) |
| (184) - HYDRAULIC INSTALLATION, MECH. BULL, ANGLE, OR CROWN & TILT DOZER (USED FROM S/N 7060799) | (600) - CASE TERRATRAC CRAWLER TRACTOR (DIESEL) (1/57-12/58) |
| (190) - HYD. BULL OR CROWN & TILT DOZER HYD. INST., (USED FROM S/N 7060799) | (600) - CASE TERRATRAC CRAWLER TRACTOR (DIESEL) (1/57-12/58) |
| (198) - HYD. ANGLE DOZER HYDRAULIC INST., (USED FROM SERIAL #7060799 | (600) - CASE TERRATRAC CRAWLER TRACTOR (DIESEL) (1/57-12/58) |
| (236) - DUAL PULL-BEHIND INSTALLATION, VALVE, LEVERS, PUMP, TUBES, HOSES, FITTINGS, (FROM S/N 7060799) | (600) - CASE TERRATRAC CRAWLER TRACTOR (DIESEL) (1/57-12/58) |
| (294) - HYDRAULIC CYLINDER ASSEMBLY | (600) - CASE TERRATRAC CRAWLER TRACTOR (DIESEL) (1/57-12/58) |
| (162) - STRAIGHT OR ANGLE DOZER HYD. SYSTEM, VALVE, LEVERS, PUMP, CYL., TUBES, HOSED (UP TO S/N 7060799) | (600) - CASE TERRATRAC GASOLINE CRAWLER TRACTOR (1/57-12/58) |
| (170) - MECHANICAL ANGLE BULLDOZER OR CROWN AND TILT, DOZER HYDRAULIC INSTALLATION | (600) - CASE TERRATRAC GASOLINE CRAWLER TRACTOR (1/57-12/58) |
| (222) - DUAL PULL-BEHIND INSTALLATION, VALVE, LEVERS, PUMP, TUBES, HOSES, FITTINGS, (FROM S/N 7060799) | (600) - CASE TERRATRAC GASOLINE CRAWLER TRACTOR (1/57-12/58) |
| (242) - WINCH CONTROL STAND INSTALLATION, STAND, SPRINGS, LEVERS, MT'G. PARTS | (600) - CASE TERRATRAC GASOLINE CRAWLER TRACTOR (1/57-12/58) |
| (148) - TERRALOAD'R HYDRAULIC INSTALLATION, PUMP, VALVE, HOSES, TUBING, FITTING (USED UP TO S/N 7060799) | (600) - CASE TERRATRAC GASOLINE CRAWLER TRACTOR (1/57-12/58) |
| (152) - TERRALOAD'R HYDRAULIC INSTALLATION, PUMP, VALVE, HOSES, TUBING, FITTINGS, (FROM S/N 7060799) | (600) - CASE TERRATRAC GASOLINE CRAWLER TRACTOR (1/57-12/58) |
| (176) - HYDRAULIC BULLDOZER OR CROWN AND TILT DOZER HYDRAULIC INSTALLATION | (600) - CASE TERRATRAC GASOLINE CRAWLER TRACTOR (1/57-12/58) |
| (184) - HYDRAULIC ANGLE DOZER HYDRAULIC INSTALLATION | (600) - CASE TERRATRAC GASOLINE CRAWLER TRACTOR (1/57-12/58) |
| (278) - HYDRAULIC CYLINDER ASSEMBLY - SCARIFIER LIFT, TUBE, PISTON ROD | (600) - CASE TERRATRAC GASOLINE CRAWLER TRACTOR (1/57-12/58) |
| (034) - OIL FILTER AND HEAT EXCHANGER, 504BDT DIESEL ENGINE | (1280) - CASE CRAWLER EXCAVATOR (1/80-12/84) |
| (034) - OIL FILTER AND HEAT EXCHANGER, 504BDT DIESEL ENGINE | (1280B) - CASE CRAWLER EXCAVATOR (1/83-12/86) |
| (030) - OIL FILTER AND HEAT EXCHANGER, 504BDT DIESEL ENGINE | (1187) - CASE LOGGER CRAWLER EXCAVATOR (1/83-12/85) |
| (034) - OIL FILTER AND HEAT EXCHANGER, 504BDT DIESEL ENGINE | (1080) - CASE CRAWLER EXCAVATOR (1/83-12/86) |
| (026) - OIL FILTER & HEAT EXCHANGER, (504BDT) DIESEL ENGINE | (980) - CASE CRAWLER EXCAVATOR (1/73-12/80) |
| (104) - TRACK ADJUSTER CYLINDER | (980) - CASE CRAWLER EXCAVATOR (1/73-12/80) |
| (161A) - MAIN VALVE TO RESERVOIR AND COOLER HYDRAULICS, (USED WITH SERIAL NUMBER 6203569 AND AFTER) | (980) - CASE CRAWLER EXCAVATOR (1/73-12/80) |
| (202) - CROWD CYLINDER HYDRAULICS | (980) - CASE CRAWLER EXCAVATOR (1/73-12/80) |
| (010) - OIL FILTER AND COOLER, 504BDT DIESEL ENGINE | (980B) - CASE CRAWLER EXCAVATOR (S/N 6203751 & AFTER) (1/76-12/81) |
| (046) - A42376 SOLENOID | (980B) - CASE CRAWLER EXCAVATOR (S/N 6203751 & AFTER) (1/76-12/81) |
| (128) - CRAWLER UNDERCARRIAGE AND RELATED PARTS | (880) - CASE CRAWLER EXCAVATOR (1/71-12/80) |
| (066) - R26136 STARTER, 24 VOLT | (880) - CASE CRAWLER EXCAVATOR (1/71-12/80) |
| (208) - MAIN VALVE TO RESERVOIR AND COOLER HYDRAULICS, (USED ON UNITS W/S.N. 6200000 THRU 6200911) | (880) - CASE CRAWLER EXCAVATOR (1/71-12/80) |
| (248) - "E" BOOM TOOL CYLINDER HYDRAULICS | (880) - CASE CRAWLER EXCAVATOR (1/71-12/80) |
| (006) - OIL FILTER AND HEAT EXCHANGER, 504BDT ENGINE | (40) - DROTT SERIES-D CRAWLER EXCAVATOR (S/N 6270716 & AFTER) (1/77-12/81) |
| (044) - STARTER ASSEMBLY, 504BDT ENGINE | (40) - DROTT SERIES-D CRAWLER EXCAVATOR (S/N 6270716 & AFTER) (1/77-12/81) |
| (144) - CABLE SPOOL AND MAIN DRIVE SHAFT, HOLT WINCH | (300) - CASE/BELOIT SKID KING WHEEL LOADER (1/68-12/69) |
| (220) - FRONT FRAME, USED BEFORE TRACTOR SERIAL NUMBER 9116848 | (600) - CASE SKID KING WHEEL LOADER (1/72-12/76) |
| (222) - FRAME FRONT, USED TRACTOR SERIAL NUMBER 9116848 AND AFTER | (600) - CASE SKID KING WHEEL LOADER (1/72-12/76) |
| (220) - FRONT FRAME, USED BEFORE TRACTOR SERIAL NUMBER 9116848 | (800) - CASE SKID KING WHEEL LOADER (1/72-12/76) |
| (222) - FRAME FRONT, USED TRACTOR SERIAL NUMBER 9116848 AND AFTER | (800) - CASE SKID KING WHEEL LOADER (1/72-12/76) |
| (220) - FRONT FRAME, USED BEFORE TRACTOR SERIAL NUMBER 9116848 | (825) - CASE SKID KING WHEEL LOADER (1/72-12/76) |
| (222) - FRAME FRONT, USED TRACTOR SERIAL NUMBER 9116848 AND AFTER | (825) - CASE SKID KING WHEEL LOADER (1/72-12/76) |
| (212) - LOADER HYDRAULICS, TILT CYLINDER HYDRAULICS | (W10B) - CASE WHEEL LOADER (S/N 8208732 TO 9808999) (1/64-12/68) |
| (216) - DROTT FOUR-IN-ONE BUCKET HYDRAULICS | (W10B) - CASE WHEEL LOADER (S/N 8208732 TO 9808999) (1/64-12/68) |
| (124) - RADIATOR, GRILLE AND SHUTTER | (W10B) - CASE WHEEL LOADER (S/N 8208732 TO 9808999) (1/64-12/68) |
| (130) - RADIATOR, GRILLE AND SHUTTER | (W10C) - CASE WHEEL LOADER (S/N 9809000 TO 9811800) (1/69-12/69) |
| (218) - DROTT FOUR-IN-ONE BUCKET HYDRAULICS | (W10C) - CASE WHEEL LOADER (S/N 9809000 TO 9811800) (1/69-12/69) |
| (240) - DROTT 4-IN-1 BUCKET HYDRAULICS | (W10E) - CASE WHEEL LOADER (S/N 9811801 & AFTER) (1/70-12/70) |
| (140) - RADIATOR, GRILLE AND SHUTTER | (W10E) - CASE WHEEL LOADER (S/N 9811801 & AFTER) (1/70-12/70) |
| (082) - ELECTRICAL SYSTEM, FRONT ELECTRICAL HARNESS | (W11) - CASE UNIT LOADER (1/83-12/83) |
| (116) - STEERING HYDRAULIC CIRCUIT | (W11) - CASE UNIT LOADER (1/83-12/83) |
| (142) - TRANSMISSION, FRONT HOUSING AND IDLER | (W11) - CASE UNIT LOADER (1/83-12/83) |
| (162) - TURN SIGNAL AND FLASHER LIGHT WITHOUT CAB | (W14) - CASE ARTICULATED WHEEL LOADER (PRIOR TO S/N 9119672) (NORTH AMERICA) (1/72-12/75) |
| (156) - FRONT FRAME AND FENDERS | (W14) - CASE ARTICULATED WHEEL LOADER (PRIOR TO S/N 9119672) (NORTH AMERICA) (1/72-12/75) |
| (157A) - UNDERCARRIAGE GUARDS | (W14) - CASE ARTICULATED WHEEL LOADER (PRIOR TO S/N 9119672) (NORTH AMERICA) (1/72-12/75) |
| (164) - ROLL-OVER PROTECTION STRUCTURE AND CAB | (W14) - CASE ARTICULATED WHEEL LOADER (PRIOR TO S/N 9119672) (NORTH AMERICA) (1/72-12/75) |
| (178) - L53924 4-IN-1 BUCKET | (W14) - CASE ARTICULATED WHEEL LOADER (PRIOR TO S/N 9119672) (NORTH AMERICA) (1/72-12/75) |
| (456) - BASIC HYDRAULIC CIRCUIT, RESERVOIR TO PUMP, BEFORE PIN 9151870 | (W14) - CASE UNIT LOADER W/POD CAB (S/N 9119672 & AFTER) (NORTH AMERICA) (1/75-12/86) |
| (458) - BASIC HYDRAULIC CIRCUIT, RESERVOIR TO PUMP, PIN 9151870 AND AFTER | (W14) - CASE UNIT LOADER W/POD CAB (S/N 9119672 & AFTER) (NORTH AMERICA) (1/75-12/86) |
| (550) - BUCKET TEETH, USED ON 84" (2133 MM) WIDE BUCKETS WITH WELD ON CUTTING EDGE | (W14) - CASE UNIT LOADER W/POD CAB (S/N 9119672 & AFTER) (NORTH AMERICA) (1/75-12/86) |
| (568) - STEPS, GRILLE, AND RADIATOR GUARD, BACKHOE MODELS ONLY | (W14) - CASE UNIT LOADER W/POD CAB (S/N 9119672 & AFTER) (NORTH AMERICA) (1/75-12/86) |
| (574) - FRONT FRAME AND FENDERS | (W14) - CASE UNIT LOADER W/POD CAB (S/N 9119672 & AFTER) (NORTH AMERICA) (1/75-12/86) |
| (578) - UNDERCARRIAGE GUARDS | (W14) - CASE UNIT LOADER W/POD CAB (S/N 9119672 & AFTER) (NORTH AMERICA) (1/75-12/86) |
| (643A) - CANOPY SCREENS, FORESTRY MODELS | (W14) - CASE UNIT LOADER W/POD CAB (S/N 9119672 & AFTER) (NORTH AMERICA) (1/75-12/86) |
| (240) - FRONT FRAME AND FENDERS | (W18) - CASE ARTICULATED WHEEL LOADER (NORTH AMERICA) (1/71-12/83) |
| (254) - ROPS CANOPY AND CAB MOUNTING | (W18) - CASE ARTICULATED WHEEL LOADER (NORTH AMERICA) (1/71-12/83) |
| (378) - FRONT FRAME AND FENDERS | (W18) - CASE WHEEL LOADER (S/N 9123140 & AFTER) (NORTH AMERICA) (1/76-12/83) |
| (9-032) - FRONT FRAME AND FENDERS | (W18B) - CASE WHEEL LOADER (1/85-12/88) |
| (014) - OIL FILTER & HEAT EXCHANGER (401 BD) DIESEL ENG. USED ENG. SN. 2523871-2570670 W/ DUAL FILTERS | (W20) - CASE WHEEL LOADER (PRIOR TO S/N 9123140) (1/71-12/83) |
| (240) - FRONT FRAME AND FENDERS | (W20) - CASE WHEEL LOADER (PRIOR TO S/N 9123140) (1/71-12/83) |
| (254) - ROPS CANOPY AND CAB MOUNTING | (W20) - CASE WHEEL LOADER (PRIOR TO S/N 9123140) (1/71-12/83) |
| (378) - FRONT FRAME AND FENDERS | (W20) - CASE WHEEL LOADER (S/N 9123140 & AFTER) (NORTH AMERICA) (1/76-12/83) |
| (064) - ALTERNATOR MOUNTING PARTS, L72955 ALTERNATOR - 65 AMP | (W20) - CASE WHEEL LOADER W/POD CAB - NEW YORK STATE SPECIAL (1/71-12/83) |
| (218) - FRONT FRAME AND FENDERS | (W20) - CASE WHEEL LOADER W/POD CAB - NEW YORK STATE SPECIAL (1/71-12/83) |
| (378) - FRONT FRAME AND FENDERS | (W20B) - CASE WHEEL LOADER (S/N 9123140 & AFTER) (NORTH AMERICA) (1/81-12/93) |
| (9-032) - FRONT FRAME AND FENDERS | (W20C) - CASE WHEEL LOADER (NORTH AMERICA) (1/82-12/89) |
| (168) - OPERATORS COMPARTMENT AND LADDER, MODELS WITHOUT ROLLOVER PROTECTION | (W24) - CASE ARTICULATED WHEEL LOADER (1/69-12/72) |
| (011A) - OIL FILTER AND HEAT EXCHANGER, (504BD) DIESEL ENG,USED W/LARGE CRANKSHAFT USED PRIOR-ENG. SN.2572011 | (W24B) - CASE ARTICULATED WHEEL LOADER (PRIOR TO S/N 9120696) (1/72-12/78) |
| (158) - FRONT AND REAR FRAME GUARDS | (W24B) - CASE ARTICULATED WHEEL LOADER (PRIOR TO S/N 9120696) (1/72-12/78) |
| (168) - FRONT FRAME AND FENDERS, FRONT FRAME AND FENDERS | (W24B) - CASE ARTICULATED WHEEL LOADER (PRIOR TO S/N 9120696) (1/72-12/78) |
| (094) - ALTERNATOR MOUNTING PARTS, L72955 ALTERNATOR - 65 AMP | (W24B) - CASE ARTICULATED WHEEL LOADER W/POD CAB (S/N 9120696 & AFTER) (1/75-12/78) |
| (266) - FRONT FRAME AND FENDERS | (W24B) - CASE ARTICULATED WHEEL LOADER W/POD CAB (S/N 9120696 & AFTER) (1/75-12/78) |
| (268) - FRONT AND REAR FRAME GUARDS, EARLY PRODUCTION | (W24B) - CASE ARTICULATED WHEEL LOADER W/POD CAB (S/N 9120696 & AFTER) (1/75-12/78) |
| (132) - 65 AMP ALTERNATOR AND MOUNTING PARTS | (W24C) - CASE WHEEL LOADER (1/77-12/85) |
| (012) - OIL FILTER & HEAT EXCHANGER, (504 BDT) DIESEL ENGINE, 1ST USED ENG. SER. NO. 2523871 | (W26B) - CASE ARTICULATED WHEEL LOADER (1/70-12/76) |
| (252) - STEERING GEAR AND LINKAGE | (W26B) - CASE ARTICULATED WHEEL LOADER (1/70-12/76) |
| (358) - LOADER AND STEERING PRIMARY HYDRAULICS CIRCUIT PUMP TO VALVE WITHOUT DEMAND VALVE | (W26B) - CASE ARTICULATED WHEEL LOADER (1/70-12/76) |
| (366) - LOADER AND STEERING PRIMARY HYDRAULICS CIRCUIT PUMP TO VALVE WITH DEMAND VALVE | (W26B) - CASE ARTICULATED WHEEL LOADER (1/70-12/76) |
| (2-06) - OIL FILTER AND HEAT EXCHANGER, 504BDT ENGINE | (W30) - CASE WHEEL LOADER (1/82-12/89) |
| (2-22) - FLYWHEEL HOUSING, 504BDT ENGINE | (W30) - CASE WHEEL LOADER (1/82-12/89) |
| (4-50) - ELECTRICAL SYSTEM, 65 AMP ALTERNATOR AND MOUNTING PARTS | (W30) - CASE WHEEL LOADER (1/82-12/89) |
| (9-30) - FRONT FRAME AND FENDERS | (W30) - CASE WHEEL LOADER (1/82-12/89) |
| (4-142) - 65 AMP ALTERNATOR AND MOUNTING PARTS | (W36) - CASE WHEEL LOADER (PRIOR TO S/N 17754000) (1/77-12/89) |
| (7-348) - BRAKE SYSTEM, BRAKE ACTUATOR TO WHEEL CYLINDER, USED BEFORE PIN 9135098 | (W36) - CASE WHEEL LOADER (PRIOR TO S/N 17754000) (1/77-12/89) |
| (7-350) - BRAKE ACTUATOR TO WHEEL CYLINDER, USED ON P.I.N. 9135098 AND AFTER | (W36) - CASE WHEEL LOADER (PRIOR TO S/N 17754000) (1/77-12/89) |
| (7-354) - BRAKE SYSTEM, AIR HORN | (W36) - CASE WHEEL LOADER (PRIOR TO S/N 17754000) (1/77-12/89) |
| (9-464) - LOADER LIFT FRAME AND LINKAGE, THREADED OR GROOVED BELLCRANK PIVOT PINS | (W36) - CASE WHEEL LOADER (PRIOR TO S/N 17754000) (1/77-12/89) |
| (9-478) - TRUNNION AND LUBRICATION LINES | (W36) - CASE WHEEL LOADER (PRIOR TO S/N 17754000) (1/77-12/89) |
| (9-480) - HOOD AND SUPPORT | (W36) - CASE WHEEL LOADER (PRIOR TO S/N 17754000) (1/77-12/89) |
| (9-484) - SIDE PANELS AND REAR FENDERS | (W36) - CASE WHEEL LOADER (PRIOR TO S/N 17754000) (1/77-12/89) |
| (9-486) - FRONT FRAME AND FENDER | (W36) - CASE WHEEL LOADER (PRIOR TO S/N 17754000) (1/77-12/89) |
| (9-542) - AIR CONDITIONING LINES, COMPRESSOR TO CONDENSER AND DRYER | (W36) - CASE WHEEL LOADER (PRIOR TO S/N 17754000) (1/77-12/89) |
| (261A) - DROTT 4-IN-1 BUCKET HYDRAULICS | (W7) - CASE WHEEL LOADER (1/62-12/68) |
| (180) - RADIATOR, GRILLE AND SHUTTER | (W7) - CASE WHEEL LOADER (1/62-12/68) |
| (210) - DROTT 4-IN-1 BUCKET HYDRAULICS | (W7E) - CASE WHEEL LOADER (S/N 9811301 & AFTER) (NORTH AMERICA) (1/70-12/72) |
| (124) - RADIATOR, GRILLE AND SHUTTER | (W8B) - CASE WHEEL LOADER (1/64-12/68) |
| (206) - LOADER HYDRAULICS, TILT CYLINDER HYDRAULICS | (W8B) - CASE WHEEL LOADER (1/64-12/68) |
| (210) - DROTT 4-IN-1 BUCKET HYDRAULICS | (W8B) - CASE WHEEL LOADER (1/64-12/68) |
| (218) - DROTT 4-IN-1 BUCKET HYDRAULICS | (W8C) - CASE WHEEL LOADER (1/69-12/69) |
| (130) - RADIATOR, GRILLE AND SHUTTER | (W8C) - CASE WHEEL LOADER (1/69-12/69) |
| (240) - DROTT 4-IN-1 BUCKET HYDRAULICS | (W8E) - CASE WHEEL LOADER (S/N 9811801 & AFTER) (1/70-12/70) |
| (140) - RADIATOR, GRILLE AND SHUTTER | (W8E) - CASE WHEEL LOADER (S/N 9811801 & AFTER) (1/70-12/70) |
| (120) - TWO SPOOL VALVE HYDRAULIC CIRCUIT, USED LATE MODEL LOADERS | (W9A) - CASE UNIT LOADER (S/N 8160001 TO 8208732) (1/60-12/63) |
| (122) - TWO SPOOL VALVE HYDRAULIC CIRCUIT, USED EARLY MODEL LOADERS | (W9A) - CASE UNIT LOADER (S/N 8160001 TO 8208732) (1/60-12/63) |
| (130) - THREE SPOOL HYDRAULIC CIRCUIT | (W9A) - CASE UNIT LOADER (S/N 8160001 TO 8208732) (1/60-12/63) |
| (212) - LOADER HYDRAULICS, TILT CYLINDER HYDRAULICS | (W9B) - CASE WHEEL LOADER (S/N 8208732 TO 9808999) (1/64-12/68) |
| (216) - DROTT FOUR-IN-ONE BUCKET HYDRAULICS | (W9B) - CASE WHEEL LOADER (S/N 8208732 TO 9808999) (1/64-12/68) |
| (124) - RADIATOR, GRILLE AND SHUTTER | (W9B) - CASE WHEEL LOADER (S/N 8208732 TO 9808999) (1/64-12/68) |
| (130) - RADIATOR, GRILLE AND SHUTTER | (W9C) - CASE WHEEL LOADER (S/N 9809000 TO 9811800) (1/69-12/69) |
| (218) - DROTT FOUR-IN-ONE BUCKET HYDRAULICS | (W9C) - CASE WHEEL LOADER (S/N 9809000 TO 9811800) (1/69-12/69) |
| (240) - DROTT 4-IN-1 BUCKET HYDRAULICS | (W9E) - CASE WHEEL LOADER (S/N 9811801 & AFTER) (1/70-12/70) |
| (140) - RADIATOR, GRILLE AND SHUTTER | (W9E) - CASE WHEEL LOADER (S/N 9811801 & AFTER) (1/70-12/70) |
| (048) - THROTTLE AND FUEL SHUTOFF CABLE | (584C) - CASE CONSTRUCTION KING FORKLIFT (1/79-12/88) |
| (048) - THROTTLE AND FUEL SHUTOFF CABLE | (585C) - CASE CONSTRUCTION KING FORKLIFT (1/79-12/88) |
| (048) - THROTTLE AND FUEL SHUTOFF CABLE | (586C) - CASE CONSTRUCTION KING FORKLIFT (1/79-12/88) |
| (158) - CLUTCH LINKAGE, MECHANICAL SHUTTLE | (580B) - CASE CONSTRUCTION KING TRACTOR W/SHUTTLE TRANSMISSION (7/71-12/77) |
| (122) - TAURODYNE ASSEMBLY, PUMP-MOTOR & LINK KIT | (580B) - CASE CONSTRUCTION KING WHEEL TRACTOR W/HYDROSTATIC TRANSMISSION (7/71-12/77) |
| (146) - DIPPER LIGHT, USED WITH EXTENDABLE DIPPER | (580C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/75-12/80) |
| (258) - BACKHOE STABILIZER CYLINDER HYDRAULIC CIRCUIT | (580C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/75-12/80) |
| (262) - BACKHOE SWING CYLINDER HYDRAULIC CIRCUIT | (580C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/75-12/80) |
| (264) - BACKHOE BOOM CYLINDER HYDRAULIC CIRCUIT, BEFORE BACKHOE S/N 5356938 | (580C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/75-12/80) |
| (266) - BACKHOE BOOM CYLINDER HYDRAULIC CIRCUIT, BACKHOE S/N 5356938 & AFTER | (580C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/75-12/80) |
| (268) - BACKHOE DIPPER CYLINDER HYDRAULIC CIRCUIT | (580C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/75-12/80) |
| (270) - BACKHOE BUCKET CYLINDER HYDRAULIC CIRCUIT, MODELS W/O EXTENDABLE DIPPER | (580C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/75-12/80) |
| (272) - BACKHOE BUCKET CYLINDER HYDRAULIC CIRCUIT, MODELS W/EXTENDABLE DIPPER | (580C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/75-12/80) |
| (274) - BACKHOE EXTENDABLE DIPPER CYLINDER HYDRAULIC CIRCUIT | (580C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/75-12/80) |
| (504) - HOOD AND RADIATOR SHROUD | (580C) - CASE CONSTRUCTION KING LOADER BACKHOE (1/75-12/80) |
| (120) - SELECTAMATIC DOUBLE ACTING SENSING UNIT | (380CK) - CASE LOADER/LANDSCAPER TRACTOR (1/70-12/80) |
| (06) - LOADER LIFT FRAME AND RELATED PARTS | (480CK) - CASE WHEEL TRACTOR W/LOADER BACKHOE (1/66-12/71) |
| (6-42) - TRANSAXLE AND DIFFERENTIAL LOCK | (480F) - CASE CONSTRUCTION KING LOADER BACKHOE (9/89-12/94) |
| (6-42) - TRANSAXLE AND DIFFERENTIAL LOCK | (480F LL) - CASE CONSTRUCTION KING LOADER BACKHOE (9/89-12/94) |
| (084) - TORQUE CONVERTER CONTROL VALVE LINKAGE | (530CK) - CASE CONSTRUCTION KING WHEEL TRACTOR (1/60-12/66) |
| (104) - STANDARD CLUTCH PEDAL AND LINKAGE | (580) - CASE CONSTRUCTION KING TRACTOR (BSN 8685800) (NORTH AMERICA) (1/66-12/71) |
| (108) - TRANSMISSION CASE AND AXLE HOUSINGS | (580) - CASE CONSTRUCTION KING TRACTOR (BSN 8685800) (NORTH AMERICA) (1/66-12/71) |
| (108) - BRAKE PEDALS AND LINKAGE | (680CK) - CASE CONSTRUCTION KING LOADER BACKHOE (S/N 9101501 TO 9102281) (1/67-12/68) |
| (110) - PARKING BRAKE AND LINKAGE | (680CK) - CASE CONSTRUCTION KING LOADER BACKHOE (S/N 9101501 TO 9102281) (1/67-12/68) |
| (172) - BACKHOE MOUNTING FRAME AND STABILIZERS | (680CK) - CASE CONSTRUCTION KING LOADER BACKHOE (S/N 9101501 TO 9102281) (1/67-12/68) |
| (134) - RADIATOR FRAME AND GRILL | (680CK) - CASE CONSTRUCTION KING LOADER BACKHOE (S/N 9101501 TO 9102281) (1/67-12/68) |
| (140) - CAB AND RELATED PARTS | (680CK) - CASE CONSTRUCTION KING LOADER BACKHOE (S/N 9101501 TO 9102281) (1/67-12/68) |
| (142) - INDIVIDUAL LEVER BACKHOE CONTROL (FOOT SWING) | (680CK) - CASE SERIES-B CONSTRUCTION KING LOADER BACKHOE (S/N 9102282 TO 9103968 (7/68-12/68) |
| (170) - INDIVIDUAL LEVER BACKHOE CONTROL (FOOT SWING) | (680CK) - CASE SERIES-B LOADER BACKHOE (S/N 9103967 TO 9105879) (1/68-12/93) |
| (116) - BRAKE SYSTEM, HYDROVAC CYLINDER GUARDS, (EARLY PRODUCTION), | (680CK) - CASE SERIES-C CONSTRUCTION KING LOADER BACKHOE (S/N 910600 TO 9111008) (1/68-12/93) |
| (182) - D15611 4-IN-1 BUCKET, BUCKET TEETH OPTIONAL | (680CK) - CASE SERIES-C CONSTRUCTION KING LOADER BACKHOE (S/N 910600 TO 9111008) (1/68-12/93) |
| (166) - ROPS CANOPY, (USED ON BACKHOE AND COUNTERWEIGHT MODELS) | (680CK) - CASE SERIES-C CONSTRUCTION KING LOADER BACKHOE (S/N 910600 TO 9111008) (1/68-12/93) |
| (148) - D15611 4-IN-1 BUCKET, OPTIONAL BUCKET TEETH | (680CK) - CASE SERIES-C CONSTRUCTION KING LOADER BACKHOE (S/N 9111009 & AFTER) (1/68-12/93) |
| (098) - HAND THROTTLE, FUEL SHUTOFF AND TACHOMETER | (780) - CASE CONSTRUCTION KING LOADER BACKHOE (1/71-12/81) |
| (086) - BATTERY CABLES AND CONNECTIONS | (780B) - CASE CONSTRUCTION KING LOADER BACKHOE (7/81-12/85) |
| (214) - EQUIPMENT HYDRAULIC CIRCUIT, RESERVOIR TO HYDRAULIC PUMPS & LOADER CONTROL VALVE | (780B) - CASE CONSTRUCTION KING LOADER BACKHOE (7/81-12/85) |
| (328) - BACKHOE SWING TOWER AND BOOM | (780B) - CASE CONSTRUCTION KING LOADER BACKHOE (7/81-12/85) |
| (344) - CHASSIS | (780B) - CASE CONSTRUCTION KING LOADER BACKHOE (7/81-12/85) |
| (352) - FENDERS AND STEPS | (780B) - CASE CONSTRUCTION KING LOADER BACKHOE (7/81-12/85) |
| (270) - EQUIPMENT HYDRAULIC CIRCUIT, TO BACKHOE CONTROL VALVE, EARLY PRODUCTION | (680E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/74-12/78) |
| (274) - EQUIPMENT HYDRAULIC CIRCUIT, RETURN LINES, BEFORE TRACTOR SN | (680E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/74-12/78) |
| (422) - CHASSIS, FENDERS AND STEPS | (680E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/74-12/78) |
| (378) - 4 IN 1 BUCKET, OPTIONAL BUCKET TEETH | (680E) - CASE CONSTRUCTION KING LOADER BACKHOE (1/74-12/78) |
| (028) - RADIATOR AND PARTS | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE AFTER S/N 3739160 (EUROPE) (1/87-12/88) |
| (116) - ACCELERATOR CABLES | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE AFTER S/N 3739160 (EUROPE) (1/87-12/88) |
| (152) - HYDRAULIC SYSTEM | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE AFTER S/N 3739160 (EUROPE) (1/87-12/88) |
| (176) - LOADER POSITION CONTROLS | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE AFTER S/N 3739160 (EUROPE) (1/87-12/88) |
| (202) - BACKHOE, STABILIZER CYLINDERS | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE AFTER S/N 3739160 (EUROPE) (1/87-12/88) |
| (276) - SIDE SHIFT BACKHOE, STABILIZER CYLINDER | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE AFTER S/N 3739160 (EUROPE) (1/87-12/88) |
| (278) - SIDE SHIFT BACKHOE, SWING CYLINDER | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE AFTER S/N 3739160 (EUROPE) (1/87-12/88) |
| (286) - SIDE SHIFT BACKHOE, BOOM AND DIPPER CYLINDER | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE AFTER S/N 3739160 (EUROPE) (1/87-12/88) |
| (302) - SIDE SHIFT BACKHOE, LEVER AND FOOT CONTROLS | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE AFTER S/N 3739160 (EUROPE) (1/87-12/88) |
| (304) - SIDE SHIFT BACKHOE, 2 LEVER CONTROLS | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE AFTER S/N 3739160 (EUROPE) (1/87-12/88) |
| (334) - ENGINE, COVER AND GRILLE | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE AFTER S/N 3739160 (EUROPE) (1/87-12/88) |
| (034) - RADIATOR AND PARTS | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE BEFORE S/N 3739160 (EUROPE) (1/87-12/88) |
| (109A) - ACCELERATOR CABLES, STARTING WITH NO 3.701.978, DC AND 3.732.999, TC | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE BEFORE S/N 3739160 (EUROPE) (1/87-12/88) |
| (138) - HYDRAULIC SYSTEM | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE BEFORE S/N 3739160 (EUROPE) (1/87-12/88) |
| (160) - LOADER POSITION CONTROLS, UP TO NO 3.736.447 | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE BEFORE S/N 3739160 (EUROPE) (1/87-12/88) |
| (161C) - LOADER POSITION CONTROLS, STARTING WITH NO 3.736.448 | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE BEFORE S/N 3739160 (EUROPE) (1/87-12/88) |
| (184) - BACKHOE STABILIZER CYLINDER | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE BEFORE S/N 3739160 (EUROPE) (1/87-12/88) |
| (256) - SIDE SHIFT BACKHOE STABILIZER CYLINDER | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE BEFORE S/N 3739160 (EUROPE) (1/87-12/88) |
| (258) - SIDE SHIFT BACKHOE SWING CYLINDER | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE BEFORE S/N 3739160 (EUROPE) (1/87-12/88) |
| (264) - SIDE SHIFT BACKHOE BOOM AND DIPPER CYLINDER | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE BEFORE S/N 3739160 (EUROPE) (1/87-12/88) |
| (282) - SIDE SHIFT BACKHOE LEVER AND FOOT CONTROLS | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE BEFORE S/N 3739160 (EUROPE) (1/87-12/88) |
| (284) - SIDE SHIFT BACKHOE (2) LEVER CONTROLS | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE BEFORE S/N 3739160 (EUROPE) (1/87-12/88) |
| (298) - ENGINE COVER AND GRILLE, UP TO NO 3.737.041 | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE BEFORE S/N 3739160 (EUROPE) (1/87-12/88) |
| (299A) - ENGINE COVER AND GRILLE, STARTING WITH NO 3.737.042 | (580F) - CASE CONSTRUCTION KING LOADER BACKHOE BEFORE S/N 3739160 (EUROPE) (1/87-12/88) |
| (320) - 4-IN-1 BUCKET | (680G) - CASE CONSTRUCTION KING LOADER BACKHOE (7/78-12/81) |
| (364) - FENDERS AND STEPS, MODELS WITH ROPS CANOPY | (680G) - CASE CONSTRUCTION KING LOADER BACKHOE (7/78-12/81) |
| (218) - AXIAL BACKHOE - STABILIZER CYLINDER HYDRAULIC CIRCUIT | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (224) - AXIAL BACKHOE - SWING CYLINDER HYDRAULIC CIRCUIT | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (228) - AXIAL BACKHOE - BOOM CYLINDER HYDRAULIC CIRCUIT | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (232) - AXIAL BACKHOE - DIPPER CYLINDER HYDRAULIC CIRCUIT | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (234) - AXIAL BACKHOE - BUCKET CYLINDER HYDRAULIC CIRCUIT | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (236) - AXIAL BACKHOE - BUCKET CYLINDER HYDRAULIC CIRCUIT | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (238) - AXIAL BACKHOE - EXTENDABLE DIPPER HYDRAULIC CIRCUIT | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (240) - AXIAL BACKHOE - BOOM LOCK HYDRAULIC CIRCUIT, AGUILON | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (242) - SIDESHIFT BACKHOE - STABILIZER CYLINDER HYDRAULIC CIRCUIT UP TO 3.947.279 | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (246) - SIDESHIFT BACKHOE - SWING CYLINDER HYDRAULIC CIRCUIT UP TO NO. 3.947.279 | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (250) - SIDESHIFT BACKHOE - LINES FROM CONTROL VALVE UP TO NO. 3.948.949 | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (251A) - SIDESHIFT BACKHOE - LINES FROM CONTROL VALVE STARTING FROM NO. 3.948.950 | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (262) - SIDESHIFT BACKHOE - EXTENDABLE DIPPER HYDRAULIC CIRCUIT (SEE FIGURE 260) UP TO NO. 3.948.949 | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (263A) - SIDESHIFT BACKHOE - EXTENDABLE DIPPER HYDRAULIC CIRCUIT (SEE FIGURE 264) STARTING FROM NO. 3.948.950 | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (266) - SIDESHIFT BACKHOE - BOOM LOCK HYDRAULIC CIRCUIT UP TO NO. 3.948.949 | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (362) - SIDESHIFT BACKHOE - VALVE CONTROL LINKAGE UP TO NO. 3.948.949 | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (363A) - SIDESHIFT BACKHOE - CONTROLS WITH HAND SWING STARTING FROM NO. 3.948.950 | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (372) - SIDESHIFT BACKHOE - EXTENDABLE DIPPER CONTROL | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (374) - SIDESHIFT BACKHOE - EXTENDABLE DIPPER CONTROL - UP TO NO. 3.948.949 | (580G) - CASE CONSTRUCTION KING LOADER BACKHOE (1/78-12/88) |
| (082) - BATTERY CABLES AND CONNECTIONS | (680H) - CASE CONSTRUCTION KING LOADER BACKHOE (1/80-12/84) |
| (202) - EQUIPMENT HYDRAULIC CIRCUIT, OIL COOLER RETURN LINES | (680H) - CASE CONSTRUCTION KING LOADER BACKHOE (1/80-12/84) |
| (206) - EQUIPMENT HYDRAULIC CIRCUIT, RESERVOIR TO HYDRAULIC PUMP | (680H) - CASE CONSTRUCTION KING LOADER BACKHOE (1/80-12/84) |
| (298) - CLAM BUCKET | (680H) - CASE CONSTRUCTION KING LOADER BACKHOE (1/80-12/84) |
| (336) - CHASSIS | (680H) - CASE CONSTRUCTION KING LOADER BACKHOE (1/80-12/84) |
| (344) - FENDERS AND STEPS | (680H) - CASE CONSTRUCTION KING LOADER BACKHOE (1/80-12/84) |
| (9-376) - CLAM BUCKET - L76489, 1-1/4 CUBIC YARD | (680K) - CASE CONSTRUCTION KING LOADER BACKHOE (1/84-12/88) |
| (9-426) - CHASSIS, STEPS AND HYDRAULIC OIL LEVEL GAUGE | (680K) - CASE CONSTRUCTION KING LOADER BACKHOE (1/84-12/88) |
| (9-436) - FENDERS AND STEPS | (680K) - CASE CONSTRUCTION KING LOADER BACKHOE (1/84-12/88) |
| (30) - BASIC BACKHOE HYDRAULICS (CRAWLER TRACTOR) | (320) - LOADER AND BACKHOE (1/57-12/73) |
| (044) - JACKSHAFT AND BEARINGS | (1500-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (056) - WHEELS | (1500-SERIES) - CASE UNI-LOADER SKID STEER LOADER (1/69-12/88) |
| (054) - WHEELS | (1530) - SERIES-B CASE UNI-LOADER SKID STEER LOADER (S/N 9816704 THRU 9825291) (1/71-12/74) |
| (56) - DRIVE HYDRAULICS, HYDRAULIC TANK TO MOTORS VARIABLE DISPLACEMENT PUMPS USED BEFORE TRAC. S/N 9826660 | (1816) - CASE UNI-LOADER SKID STEER LOADER (1/73-12/84) |
| (132) - AUXILIARY HYDRAULICS, W/PARKER HANNIFIN VALVE, DIVERTER VALVES & MOUNTING | (1830) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/74-12/80) |
| (140) - AUXILIARY HYDRAULIC CIRCUITS, USED WITH CESSNA VALVE, DIVERTER VALVES AND MOUNTING | (1830) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/74-12/80) |
| (154) - AUXILIARY HYDRAULIC CONTROLS AND VALVE MOUNTING | (1835) - CASE UNI-LOADER SKID STEER LOADER (7/80-12/82) |
| (148) - DRIVE HYDRAULIC CIRCUITS | (1845) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/75-12/88) |
| (198) - AUXILIARY HYDRAULIC CIRCUITS, BASIC HYDRAULIC CIRCUIT WITHOUT FRONT HYDRAULIC CIRCUIT | (1845) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/75-12/88) |
| (200) - AUXILIARY HYDRAULIC CIRCUITS, BASIC HYDRAULIC CIRCUIT WITH FRONT HYDRAULIC CIRCUIT | (1845) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/75-12/88) |
| (230) - AUXILIARY CONTROLS AND VALVE MOUNT, SELECTOR VALVES AND MOUNTING, BASIC AUXILIARY CONTROL | (1845) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/75-12/88) |
| (264) - GUARDS, FLOOR MATS, AND BELLY PANS | (1845) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/75-12/88) |
| (148) - DRIVE HYDRAULIC CIRCUITS | (1845S) - CASE UNI-LOADER SKID STEER LOADER (1/75-12/88) |
| (198) - AUXILIARY HYDRAULIC CIRCUITS, BASIC HYDRAULIC CIRCUIT WITHOUT FRONT HYDRAULIC CIRCUIT | (1845S) - CASE UNI-LOADER SKID STEER LOADER (1/75-12/88) |
| (200) - AUXILIARY HYDRAULIC CIRCUITS, BASIC HYDRAULIC CIRCUIT WITH FRONT HYDRAULIC CIRCUIT | (1845S) - CASE UNI-LOADER SKID STEER LOADER (1/75-12/88) |
| (230) - AUXILIARY CONTROLS AND VALVE MOUNT, SELECTOR VALVES AND MOUNTING, BASIC AUXILIARY CONTROL | (1845S) - CASE UNI-LOADER SKID STEER LOADER (1/75-12/88) |
| (264) - GUARDS, FLOOR MATS, AND BELLY PANS | (1845S) - CASE UNI-LOADER SKID STEER LOADER (1/75-12/88) |
| (140) - CABLE PLOW - MECHANICAL | (475) - CASE CABLE LAYER W/301B ENGINE (PRIOR TO S/N 3058169) (1/72-12/83) |
| (116) - HOOD, SHROUD, GRILLE AND SCREENS | (475) - CASE CABLE LAYER W/301B ENGINE (PRIOR TO S/N 3058169) (1/72-12/83) |
| (204) - VIBRATOR DRIVE HYDRAULIC CIRCUIT AND MOTOR MOUNTING | (475) - CASE CABLE LAYER W/336 ENGINE (S/N 3058169 & AFTER) (1/72-12/83) |
| (258) - CABLE PLOW AND CYLINDER MOUNTING | (475) - CASE CABLE LAYER W/336 ENGINE (S/N 3058169 & AFTER) (1/72-12/83) |
| (280) - HOOD AND SIDE SHIELDS, USED ON MODELS WITH HORIZONTAL AIR INTAKE ONLY | (475) - CASE CABLE LAYER W/336 ENGINE (S/N 3058169 & AFTER) (1/72-12/83) |
| (282) - HOOD, SHROUD, GRILLE, AND SIDE SHIELDS, MODELS WITH VERTICAL AIR INTAKE | (475) - CASE CABLE LAYER W/336 ENGINE (S/N 3058169 & AFTER) (1/72-12/83) |
